diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml
new file mode 100644
index 0000000..d74fb89
--- /dev/null
+++ b/.github/workflows/build.yml
@@ -0,0 +1,5 @@
+on: [push, pull_request, workflow_dispatch]
+
+jobs:
+  build:
+    uses: zmkfirmware/zmk/.github/workflows/build-user-config.yml@main
diff --git a/boards/shields/.gitkeep b/boards/shields/.gitkeep
new file mode 100644
index 0000000..e69de29
diff --git a/build.yaml b/build.yaml
new file mode 100644
index 0000000..c74fbb0
--- /dev/null
+++ b/build.yaml
@@ -0,0 +1,24 @@
+# This file generates the GitHub Actions matrix.
+# For simple board + shield combinations, add them to the top level board and
+# shield arrays, for more control, add individual board + shield combinations
+# to the `include` property. You can also use the `cmake-args` property to
+# pass flags to the build command and `artifact-name` to assign a name to
+# distinguish build outputs from each other:
+#
+# board: [ "nice_nano_v2" ]
+# shield: [ "corne_left", "corne_right" ]
+# include:
+#   - board: bdn9_rev2
+#   - board: nice_nano_v2
+#     shield: reviung41
+#   - board: nice_nano_v2
+#     shield: corne_left
+#     cmake-args: -DCONFIG_ZMK_USB_LOGGING=y
+#     artifact-name: corne_left_with_logging
+#
+---
+include:
+  - board: nice_nano_v2
+    shield: corne_left
+  - board: nice_nano_v2
+    shield: corne_right
diff --git a/config/corne.conf b/config/corne.conf
new file mode 100644
index 0000000..974243c
--- /dev/null
+++ b/config/corne.conf
@@ -0,0 +1,6 @@
+# Uncomment the following lines to enable the Corne RGB Underglow
+# CONFIG_ZMK_RGB_UNDERGLOW=y
+# CONFIG_WS2812_STRIP=y
+
+# Uncomment the following line to enable the Corne OLED Display
+# CONFIG_ZMK_DISPLAY=y
diff --git a/config/corne.keymap b/config/corne.keymap
new file mode 100644
index 0000000..01350bd
--- /dev/null
+++ b/config/corne.keymap
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2020 The ZMK Contributors
+ *
+ * SPDX-License-Identifier: MIT
+ */
+
+#include <behaviors.dtsi>
+#include <dt-bindings/zmk/keys.h>
+#include <dt-bindings/zmk/bt.h>
+
+/ {
+        keymap {
+                compatible = "zmk,keymap";
+
+                default_layer {
+// -----------------------------------------------------------------------------------------
+// |  TAB |  Q  |  W  |  E  |  R  |  T  |   |  Y  |  U   |  I  |  O  |  P  | BKSP |
+// | CTRL |  A  |  S  |  D  |  F  |  G  |   |  H  |  J   |  K  |  L  |  ;  |  '   |
+// | SHFT |  Z  |  X  |  C  |  V  |  B  |   |  N  |  M   |  ,  |  .  |  /  | ESC  |
+//                    | GUI | LWR | SPC |   | ENT | RSE  | ALT |
+                        bindings = <
+   &kp TAB   &kp Q &kp W &kp E &kp R &kp T   &kp Y &kp U  &kp I     &kp O   &kp P    &kp BSPC
+   &kp LCTRL &kp A &kp S &kp D &kp F &kp G   &kp H &kp J  &kp K     &kp L   &kp SEMI &kp SQT
+   &kp LSHFT &kp Z &kp X &kp C &kp V &kp B   &kp N &kp M  &kp COMMA &kp DOT &kp FSLH &kp ESC
+                  &kp LGUI &mo 1 &kp SPACE   &kp RET &mo 2 &kp RALT
+                        >;
+                };
+                lower_layer {
+// -----------------------------------------------------------------------------------------
+// |  TAB |  1  |  2  |  3  |  4  |  5  |   |  6  |  7  |  8  |  9  |  0  | BKSP |
+// | BTCLR| BT1 | BT2 | BT3 | BT4 | BT5 |   | LFT | DWN |  UP | RGT |     |      |
+// | SHFT |     |     |     |     |     |   |     |     |     |     |     |      |
+//                    | GUI |     | SPC |   | ENT |     | ALT |
+                        bindings = <
+   &kp TAB    &kp N1       &kp N2       &kp N3       &kp N4       &kp N5         &kp N6   &kp N7   &kp N8 &kp N9    &kp N0 &kp BSPC
+   &bt BT_CLR &bt BT_SEL 0 &bt BT_SEL 1 &bt BT_SEL 2 &bt BT_SEL 3 &bt BT_SEL 4   &kp LEFT &kp DOWN &kp UP &kp RIGHT &trans &trans
+   &kp LSHFT  &trans       &trans       &trans       &trans       &trans         &trans   &trans   &trans &trans    &trans &trans
+                                    &kp LGUI     &trans       &kp SPACE      &kp RET  &trans   &kp RALT
+                        >;
+                };
+
+                raise_layer {
+// -----------------------------------------------------------------------------------------
+// |  TAB |  !  |  @  |  #  |  $  |  %  |   |  ^  |  &  |  *  |  (  |  )  | BKSP |
+// | CTRL |     |     |     |     |     |   |  -  |  =  |  [  |  ]  |  \  |  `   |
+// | SHFT |     |     |     |     |     |   |  _  |  +  |  {  |  }  | "|" |  ~   |
+//                    | GUI |     | SPC |   | ENT |     | ALT |
+                        bindings = <
+   &kp  TAB  &kp EXCL &kp AT &kp HASH &kp DLLR &kp PRCNT   &kp CARET &kp AMPS  &kp ASTRK &kp LPAR &kp RPAR &kp BSPC
+   &kp LCTRL &trans   &trans &trans   &trans   &trans      &kp MINUS &kp EQUAL &kp LBKT  &kp RBKT &kp BSLH &kp GRAVE
+   &kp LSHFT &trans   &trans &trans   &trans   &trans      &kp UNDER &kp PLUS  &kp LBRC  &kp RBRC &kp PIPE &kp TILDE
+                             &kp LGUI &trans   &kp SPACE   &kp RET   &trans    &kp RALT
+                        >;
+                };
+        };
+};
diff --git a/config/west.yml b/config/west.yml
new file mode 100644
index 0000000..b886cbe
--- /dev/null
+++ b/config/west.yml
@@ -0,0 +1,13 @@
+manifest:
+  remotes:
+    - name: zmkfirmware
+      url-base: https://github.com/zmkfirmware
+    # Additional modules containing boards/shields/custom code can be listed here as well
+    # See https://docs.zephyrproject.org/3.2.0/develop/west/manifest.html#projects
+  projects:
+    - name: zmk
+      remote: zmkfirmware
+      revision: main
+      import: app/west.yml
+  self:
+    path: config
diff --git a/zephyr/module.yml b/zephyr/module.yml
new file mode 100644
index 0000000..1cc2b35
--- /dev/null
+++ b/zephyr/module.yml
@@ -0,0 +1,3 @@
+build:
+  settings:
+    board_root: .