From 0003516537cc91089ca7b3abf0669e204a6abe51 Mon Sep 17 00:00:00 2001
From: galile0 <134774462+galile0-designs@users.noreply.github.com>
Date: Thu, 22 Feb 2024 17:46:03 +0100
Subject: [PATCH] Update README.md

---
 README.md | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/README.md b/README.md
index bc095a4..c7c9428 100644
--- a/README.md
+++ b/README.md
@@ -7,6 +7,9 @@ v1.2 with MT3 3277
 # Inspiration
 glyphkbd was largely inspired by [drFaustroll's amazing m65](https://mlego.elena.space/m65/) as well as the beautiful [Stucco](https://www.reddit.com/r/CustomKeyboards/comments/10k8k6w/custom_ortho_tkl_done_stucco1510/). glyph v1 uses sealing strips as a mounting method, something I learned from [KotteCE's Batoid](https://github.com/kotte-computer-electronics/batoid). I have to say it's the best mounting method I've discovered so far for these types of DIY, 3D-printed handwire boards, far better than my previous experiments. It's dirt cheap, available at pretty much any hardware store, and the sound profile is relatively pleasant also.
 
+# v2
+glyphkbd_v2 uses an actual PCB, with integrated STM32F072 controller running QMK, with VIA use enabled.
+
 # v1.x
 **Comprehensive v1.2 build guide found [here.](https://github.com/galile0-designs/glyphkbd/blob/main/v1.2/v1.2_build_guide.md)**