diff --git a/README.md b/README.md
index 2bfc543..1220466 100644
--- a/README.md
+++ b/README.md
@@ -5,14 +5,12 @@
 v1.2 with MT3 3277
 
 # Inspiration
-glyph was largely inspired by [drFaustroll's amazing m65](https://mlego.elena.space/m65/) as well as the beautiful [Stucco](https://www.reddit.com/r/CustomKeyboards/comments/10k8k6w/custom_ortho_tkl_done_stucco1510/). glyph v1 uses sealing strips as a mounting method, something I learned from [KotteCE's Batoid](https://github.com/kotte-computer-electronics/batoid). I have to say it's the best mounting method I've discovered so far for these types of DIY, 3D-printed handwire boards, far better than my previous experiments. It's dirt cheap, available at pretty much any hardware store, and the sound profile is relatively pleasant also.
+glyphkbd was largely inspired by [drFaustroll's amazing m65](https://mlego.elena.space/m65/) as well as the beautiful [Stucco](https://www.reddit.com/r/CustomKeyboards/comments/10k8k6w/custom_ortho_tkl_done_stucco1510/). glyph v1 uses sealing strips as a mounting method, something I learned from [KotteCE's Batoid](https://github.com/kotte-computer-electronics/batoid). I have to say it's the best mounting method I've discovered so far for these types of DIY, 3D-printed handwire boards, far better than my previous experiments. It's dirt cheap, available at pretty much any hardware store, and the sound profile is relatively pleasant also.
 
 # v1
 **Comprehensive v1.2 build guide found [here.](https://github.com/galile0-designs/glyphkbd/blob/main/v1.2/v1.2_build_guide.md)**
 
-**Caution: glyph v1 require quite a girthy 3D-printer, you need at least 350x150mm bed area, and the parts are not designed to be split**
-
-v1 of glyph are 3d-printed and handwired builds. Since it was so novel to me and I didn't know if I would actually like the layout, it made sense not to dive straight in with a PCB and expensive cnc case, so for v1 I went with a handwired, 3d-printed approach.
+v1 of glyph are 3d-printed and handwired builds using a USB-C RPi Pico clone as controller, running KMK firmware
 
 ![Screenshot (71)](https://github.com/galile0-designs/glyphkbd/assets/134774462/88afe18e-234d-4641-b500-0ae28008e2be)
 ![Screenshot (70)](https://github.com/galile0-designs/glyphkbd/assets/134774462/f4656880-d6ba-46b9-afc0-582e63f19edb)
@@ -25,4 +23,4 @@ v1 with MTNU Susu
 v1.1 with 3277, this one won keyboard of the month on the swedish MK discord server!
 
 # License
-glyph is licensed under CERN Open Hardware Licence Version 2 - Strongly Reciprocal
+glyphkbd is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 4.0