cw_pdmenu_checkable.pro

;  This is a modified version of ITT's cw_pdmenu routine, modified to
;  add the ability to check off checkbuttons. This is implemented with 
;  a new bit flag using bit 8.
;
;  See http://www.idlcoyote.com/widget_tips/checkmarks.html
;
;
; Most of the code is
; Copyright (c) 1992-2009, ITT Visual Information Solutions. All
;       rights reserved. Unauthorized reproduction is prohibited.
;
;
;+
; NAME:
;	CW_PDMENU
;
; PURPOSE:
;	CW_PDMENU is a compound widget that simplifies creating
;	pulldown menus. It has a simpler interface than the XPDMENU
;	procedure, which it is intended to replace. Events for the
;	individual buttons are handled transparently, and a CW_PDMENU
;	event returned. This event can return any one of the following:
;               - The Index of the button within the base.
;               - The widget ID of the button.
;               - The name of the button.
;		- The fully qualified name of the button. This allows
;		  different sub-menus to contain buttons with the same
;		  name in an unambiguous way.
;
;
; CATEGORY:
;	Compound widgets.
;
; CALLING SEQUENCE:
;	widget = CW_PDMENU(Parent, Desc)
;
; INPUTS:
;       Parent:	The ID of the parent widget.
;	Desc:	An array of strings or structures.  Each element contains
;		a menu description with two fields, a flag field, and
;		the name of the item.  If a structure, each element
;		is defined as follows:
;			{ CW_PDMENU_S, flags:0, name:'' }
;
;		The name tag gives the name of button. The flags
;		field is a two-bit bitmask that controls how the button is
;		interpreted:
;
;		    Value	   Meaning
;		    -------------------------------------------
;		     0     This button is neither the beginning
;			   nor the end of a pulldown level.
;		     1     This button is the root of a
;                          sub-pulldown menu. The sub-buttons
;			   start with the next button.
;		     2     This button is the last button at the
;			   current pulldown level. The next button
;			   belongs to the same level as the current
;			   parent button.
;			   If none or empty string is specified as a
;			   the name, the button is not created, but
;			   the next button belongs to the upward level.
;		     3     This button is the root of a sub-pulldown
;			   menu, but it is also the last entry of
;			   the current level.
;		     4     Same as 0, above, except that this button will
;			   be preceeded by a separator as with the SEPARATOR
;			   keyword to WIDGET_BUTTON.
;		     5     Same as 1, above, except that this button will
;			   be preceeded by a separator.
;		     6     Same as 2, above, except that this button will
;			   be preceeded by a separator.
;		     7     Same as 3, above, except that this button will
;			   be preceeded by a separator.
;
;			 8  This button will be able to have a checkbox marked 
;			 	next to it (i.e. /CHECKED_MENU will be set when creating the
;			 	widget)
;
;	If Desc is a string, each element contains the flag field
;	followed by a backslash character, followed by the menu item's
;	contents.  See the example below.
;
;	EVENT PROCEDURES:  An event procedure may be specified for an
;	element and all its children, by including a third field
;	in Desc, if Desc is a string array.  Events for buttons without
;	an event procedure, are dispatched normally.
;	See the example below.
;
; KEYWORD PARAMETERS:
;	CONTEXT_MENU:	  if constructing a context menu pulldown, set this
;			  keyword.  In this case, the parent must be the
;			  widget id of a context menu base, returned by
;			  WIDGET_BASE(..., /CONTEXT_MENU).
;	DELIMITER:        The character used to separate the parts of a
;			  fully qualified name in returned events. The
;			  default is to use the '.' character.
;	FONT:		  The name of the font to be used for the button
;			  titles. If this keyword is not specified, the
;			  default font is used.
;	HELP:		  If MBAR is specified and one of the buttons on the
;			  menubar has the label "help" (case insensitive) then
;			  that button is created with the /HELP keyword to
;			  give it any special appearance it is supposed to
;			  have on a menubar. For example, Motif expects
;			  help buttons to be on the right.
;	IDS:		  A named variable into which the button IDs will
;			  be stored as a longword vector.
;	MBAR:		  if constructing a menu-bar pulldown, set this
;			  keyword.  In this case, the parent must be the
;			  widget id of the menu bar of a top-level base,
;			  returned by WIDGET_BASE(..., MBAR=mbar).
;	RETURN_ID:	  If present and non-zero, the VALUE field of returned
;			  events will be the widget ID of the button.
;	RETURN_INDEX:	  If present and non-zero, the VALUE field of returned
;			  events will be the zero-based index of the button
;			  within the base. THIS IS THE DEFAULT.
;	RETURN_NAME:	  If present and non-zero, the VALUE field of returned
;			  events will be the name of the selected button.
;	RETURN_FULL_NAME: If present and non-zero, the VALUE field of returned
;               	  events will be the fully qualified name of the
;			  selected button. This means that the names of all
;			  the buttons from the topmost button of the pulldown
;			  menu to the selected one are concatenated with the
;			  delimiter specified by the DELIMITER keyword. For
;			  example, if the top button was named COLORS, the
;			  second level button was named BLUE, and the selected
;			  button was named LIGHT, the returned value would be
;
;			  COLORS.BLUE.LIGHT
;
;			  This allows different submenus to have buttons with
;			  the same name (e.g. COLORS.RED.LIGHT).
;	UVALUE:		  The user value to be associated with the widget.
;       UNAME:            The user name to be associated with the widget.
;	XOFFSET:	  The X offset of the widget relative to its parent.
;	YOFFSET:	  The Y offset of the widget relative to its parent.
;
; OUTPUTS:
;       The ID of the top level button is returned.
;
; SIDE EFFECTS:
;	This widget generates event structures with the following definition:
;
;		event = { ID:0L, TOP:0L, HANDLER:0L, VALUE:0 }
;
;	VALUE is either the INDEX, ID, NAME, or FULL_NAME of the button,
;	depending on how the widget was created.
;
; RESTRICTIONS:
;	Only buttons with textual names are handled by this widget.
;	Bitmaps are not understood.
;
; EXAMPLE:
;	The following is the description of a menu bar with two buttons,
;	"Colors" and "Quit". Colors is a pulldown containing the colors
;	"Red", "Green", Blue", "Cyan", and "Magenta". Blue is a sub-pulldown
;	containing "Light", "Medium", "Dark", "Navy", and "Royal":
;
;		; Make sure CW_PDMENU_S is defined
;		junk = { CW_PDMENU_S, flags:0, name:'' }
;
;		; The description
;		desc = [ { CW_PDMENU_S, 1, 'Colors' }, $
;			     { CW_PDMENU_S, 0, 'Red' }, $
;			     { CW_PDMENU_S, 0, 'Green' }, $
;			     { CW_PDMENU_S, 5, 'Blue\BLUE_EVENT_PROC' }, $
;			         { CW_PDMENU_S, 0, 'Light' }, $
;			         { CW_PDMENU_S, 0, 'Medium' }, $
;			         { CW_PDMENU_S, 0, 'Dark' }, $
;			         { CW_PDMENU_S, 0, 'Navy' }, $
;			         { CW_PDMENU_S, 2, 'Royal' }, $
;			       { CW_PDMENU_S, 4, 'Cyan' }, $
;			       { CW_PDMENU_S, 2, 'Magenta\MAGENTA_EVENT_PROC' }, $
;			 { CW_PDMENU_S, 2, 'Quit' } ]
;
;	The same menu may be defined as a string by equating the Desc parameter
;	to the following string array:
;
;	desc =[ '1\Colors' , $
;		'0\Red' , $
;		'0\Green' , $
;		'5\Blue\BLUE_EVENT_PROC' , $
;		'0\Light' , $
;		'0\Medium' , $
;		'0\Dark' , $
;		'0\Navy' , $
;		'2\Royal' , $
;		'4\Cyan' , $
;		'2\Magenta\MAGENTA_EVENT_PROC' , $
;		'2\Quit'  ]
;
;
;	The following small program can be used with the above description
;	to create the specified menu:
;
;
;		base = widget_base()
;		menu = cw_pdmenu(base, desc, /RETURN_FULL_NAME)
;		WIDGET_CONTROL, /REALIZE, base
;		repeat begin
;		  ev = WIDGET_EVENT(base)
;		  print, ev.value
;		end until ev.value eq 'Quit'
;		WIDGET_CONTROL, /DESTROY, base
;		end
;
;	Note that independent event procedures were specified for
;	the multiple Blue buttons (blue_event_proc), and the Magenta button
;	(magenta_event_proc).

; MODIFICATION HISTORY:
;	18 June 1992, AB
;	16 Jan 1995, DMS, Added MBAR keyword, event procedures,
;			and menu descriptor strings.
;	2 July 1995, AB, Added HELP keyword.
;	3 September 1996, LP, Added button-less end of current level
;   2012 October?:  M. Perrin. Modified to add checked_menu checkboxes
;					using a value of 8.
;-


function CW_PDMENU_CHECKABLE_EVENT, ev

  COMPILE_OPT hidden
  WIDGET_CONTROL, ev.id, get_uvalue=uvalue

  return, { ID:ev.handler, TOP:ev.top, HANDLER:0L, value:uvalue }

end







pro CW_pdmenu_checkable_BUILD, parent, desc, cur, n, ev_type, full_qual_str, $
	delim, ids, mbars, HELP_KW, FONT=font, uname, context_menus
; Recursive routine that builds the pulldown hierarchy described in DESC.
; Returns the ID of each button in ids.

  COMPILE_OPT hidden
  is_string = size(desc)
  is_string = is_string[is_string[0]+1] eq 7
  while (cur lt n) do begin
    separator=0
    if is_string then begin
        ; String version of DESC structure
		a = strtok(desc[cur], '\',/EXTRACT)
		dflags = fix(strtrim(a[0],2))
        if (dflags and 7) GT 3 then begin
          separator = 1
          dflags = dflags - 4
        endif
        ; End of the level, and no button
        if dflags EQ 2 AND N_ELEMENTS(a) LT 2 then begin
            ids[cur] = 0
            cur = cur + 1
            return
        endif
        dname = a[1]
    endif else begin
        ; Structure version of DESC structure
        dflags = desc[cur].flags
        if (dflags and 7) GT 3 then begin
          separator = 1
          dflags = dflags - 4
        endif
        dname = desc[cur].name
        ; End of the level, and no button
        if dflags EQ 2 AND dname EQ '' then begin
            ids[cur] = 0
            cur = cur + 1
            return
        endif
        a = ['', strtok(dname, '\',/EXTRACT)]
        dname = a[1]
    endelse

    if (strlen(full_qual_str) ne 0) then $
      new_qstr = full_qual_str + delim + dname $
    else new_qstr = dname
    ;If parented to a menu bar, don't draw a frame.
    if (dflags and 1) then begin
       menu=(2-mbars + context_menus)
    endif else menu = 0

   if ((mbars ne 0) and (HELP_KW ne 0) $
       and (strupcase(dname) eq 'HELP')) then $
       helpvar=1

     new = WIDGET_BUTTON(parent, value=dname, MENU=menu, $
                         HELP=helpvar,  $
                         FONT=font,  $
                         SEPARATOR=separator, $
						 CHECKED_MENU = (dflags and 8), $
                         UNAME=uname+'_BUTTON'+STRTRIM(cur,2))

    ; Set requested Return value
    case ev_type of
      0: uvalue = cur
      1: uvalue = new
      2: uvalue = dname
      3: uvalue = new_qstr
    endcase
    WIDGET_CONTROL, new, SET_UVALUE=uvalue

    ; Register event procedure
    if n_elements(a) ge 3 then WIDGET_CONTROL, new, EVENT_PRO=strtrim(a[2],2)
    ids[cur] = new
    cur = cur + 1

    ; Pullright menu button, start new level
    if (dflags and 1) then $
      CW_pdmenu_checkable_BUILD,new,desc,cur,n,ev_type,$
      new_qstr,delim,ids,mbars, 0,FONT=font,uname, context_menus

    ; End of the current level
    if ((dflags and 2) ne 0) then return
  endwhile

end






function CW_pdmenu_checkable, parent, desc, COLUMN=column, CONTEXT_MENU=context_menu, $
	DELIMITER=delim, FONT=font, $
	IDS=ids, MBAR=mbar, HELP=HELP_KW, $
	RETURN_ID=r_id, RETURN_INDEX=ignore, RETURN_NAME=r_name, $
	RETURN_FULL_NAME=r_full_name, $
	TAB_MODE=tab_mode, $
	UVALUE=uvalue, XOFFSET=xoffset, YOFFSET=yoffset, $
    UNAME=uname

  IF (N_PARAMS() ne 2) THEN MESSAGE, 'Incorrect number of arguments'

  ON_ERROR, 2						;return to caller

  ; Set default values for the keywords
  If KEYWORD_SET(column) then row = 0 else begin row = 1 & column = 0 & end
  IF (N_ELEMENTS(delim) eq 0)	then delim = '.'
  IF (N_ELEMENTS(uvalue) eq 0)	then uvalue = 0
  if (not KEYWORD_SET(uname)) then uname = 'CW_pdmenu_checkable_UNAME'
  IF (N_ELEMENTS(xoffset) eq 0)	then xoffset=0
  IF (N_ELEMENTS(yoffset) eq 0)	then yoffset=0

  ; How to interpret ev_type:
  ;	0 - Return index
  ;	1 - Return ID
  ;	2 - Return name
  ;	3 - Return fully qualified name.
  ev_type = 0
  if (keyword_set(r_id)) 	then ev_type = 1
  if (keyword_set(r_name)) 	then ev_type = 2
  if (keyword_set(r_full_name))	then ev_type = 3

  n = n_elements(desc)
  ids = lonarr(n)
  mbars = KEYWORD_SET(mbar)
  context_menus = KEYWORD_SET(context_menu)
  help_kw = KEYWORD_SET(HELP_KW)
  if (mbars OR context_menus) then BEGIN
    base = parent
    if (keyword_set(uvalue)) then WIDGET_CONTROL, base, SET_UVALUE=uvalue
    if (keyword_set(uname)) then WIDGET_CONTROL, base, SET_UNAME=uname
  ENDIF else BEGIN
    base = widget_base(parent, COLUMN=column, UNAME=uname, $
		     ROW=row, UVALUE=uvalue, XOFFSET=xoffset, YOFFSET=yoffset)
  ENDELSE

  WIDGET_CONTROL, base, EVENT_FUNC='CW_pdmenu_checkable_EVENT'

  if ( N_ELEMENTS(tab_mode) ne 0 ) then $
    WIDGET_CONTROL, base, TAB_MODE = tab_mode

 CW_pdmenu_checkable_BUILD, base, desc, 0, n, ev_type, '', delim, ids, mbars, help_kw, $
	FONT=font, uname, context_menus

  return, base
END