User Guide

Configuration Flags
Auto-Hide Configuration Flags
DockWidget Feature Flags
Central Widget
Empty Dock Area
Custom Close Handling
Styling
- Disabling the Internal Style Sheet

Configuration Flags

The Advanced Docking System has a number of global configuration options to configure the design and the functionality of the docking system. Each configuration will be explained in detail in the following sections.

Setting Configuration Flags

You must set the configuration flags before creating the dock manager instance otherwise the manager will not be created correctly and will crash upon being created. That means, setting the configurations flags is the first thing you must do, if you use the library.

CDockManager::setConfigFlags(CDockManager::DefaultOpaqueConfig);
CDockManager::setConfigFlag(CDockManager::RetainTabSizeWhenCloseButtonHidden, true);
...
d->DockManager = new CDockManager(this);

If you set the configurations flags, you can set individual flags using the function CDockManager::setConfigFlag or you can set all flags using the function CDockManager::setConfigFlags. Instead of settings all flags individually, it is better to pick a predefined set of configuration flags and then modify individual flags. The following predefined configurations are available

DefaultNonOpaqueConfig - uses non opaque splitter resizing and non opaque docking
DefaultOpaqueConfig - uses opaque splitter resizing and opaque docking

Pick one of those predefined configurations and then modify the following configurations flags to adjust the docking system to your needs.

`ActiveTabHasCloseButton`

If this flag is set (default configuration), the active tab in a tab area has a close button.

If this flag is cleared, the active tab has no close button. You can combine this with the flag DockAreaCloseButtonClosesTab to use the close button of the dock are to close the single tabs.

`DockAreaHasCloseButton`

If the flag is set (default configuration) each dock area has a close button.

If this flag is cleared, dock areas do not have a close button.

`DockAreaCloseButtonClosesTab`

If the flag is set, the dock area close button closes the active tab, if not set, it closes the complete dock area (default).

`OpaqueSplitterResize`

The advanced docking system uses standard QSplitters as resize separators and thus supports opaque and non-opaque resizing functionality of QSplitter. In some rare cases, for very complex widgets or on slow machines resizing via separator on the fly may cause flicking and glaring of rendered content inside a widget. This global dock manager flag configures the resizing behaviour of the splitters. If this flag is set, then widgets are resized dynamically (opaquely) while interactively moving the splitters. If you select the predefined configuration DefaultOpaqueConfig, then this is the configured behaviour.

If this flag is cleared, the widget resizing is deferred until the mouse button is released - this is some kind of lazy resizing separator. If you select the predefined configuration DefaultNonOpaqueConfig, then this is the configured behaviour.

`XmlAutoFormattingEnabled`

If enabled, the XML writer automatically adds line-breaks and indentation to empty sections between elements (ignorable whitespace). This is used, when the current state or perspective is saved. It is disabled by default.

`XmlCompressionEnabled`

If enabled, the XML output will be compressed and is not human readable anymore. This ie enabled by default to minimize the size of the saved data.

`TabCloseButtonIsToolButton`

If enabled the tab close buttons will be QToolButtons instead of QPushButtons - disabled by default. Normally the default configuration should be ok but if your application requires QToolButtons instead of QPushButtons for styling reasons or for any other reasons, then you can enable this flag.

`AllTabsHaveCloseButton`

If this flag is set, then all tabs that are closable show a close button. The advantage of this setting is that the size of the tabs does not change and the user can immediately close each tab. The disadvantage is that all tabs take up more space.

If this flas is cleared, then only the active tab has a close button (default) and therefore the tabs need less space.

`RetainTabSizeWhenCloseButtonHidden`

If this flag is set, the space for the close button is reserved even if the close button is not visible. This flag is disabled by default. If this flag is disabled, the tab size dynamically changes if the close button is visible / hidden in a tab. If this flag is enabled, the tab size always remains constant, that means, if enabled, the tabs need more space.

`DragPreviewIsDynamic`

If non-opaque undocking is enabled, this flag defines the behavior of the drag preview window. If this flag is enabled, then it will give the user the impression, that the floating drag preview is dynamically adjusted to the drop area. In order to give the perfect impression, you should disable the flags DragPreviewShowsContentPixmap and DragPreviewHasWindowFrame.

CDockManager::setConfigFlag(CDockManager::DragPreviewIsDynamic, true);
CDockManager::setConfigFlag(CDockManager::DragPreviewShowsContentPixmap, false);
CDockManager::setConfigFlag(CDockManager::DragPreviewHasWindowFrame, false);

`DragPreviewShowsContentPixmap`

If non-opaque undocking is enabled, the created drag preview window shows a copy of the content of the dock widget / dock are that is dragged, if this flag is enabled (default).

If this flag is disabled, the drag preview is only a transparent QRubberBand like window without any content.

`DragPreviewHasWindowFrame`

If non-opaque undocking is enabled, then this flag configures if the drag preview is frameless (default) or looks like a real window. If it is enabled, then the drag preview is a transparent window with a system window frame.

`AlwaysShowTabs`

If this option is enabled, the tab of a dock widget is always displayed - even if it is the only visible dock widget in a floating widget. In the image below on the left side, the flag is disabled (default) and on the right side it is enabled.

`DockAreaHasUndockButton`

If the flag is set (default) each dock area has an undock button (right image). If the flag is cleared, a dock area has no undock button (left image)

`DockAreaHasTabsMenuButton`

Tabs are a good way to quickly switch between dockwidgets in a dockarea. However, if the number of dockwidgets in a dockarea is too large, this may affect the usability of the tab bar. To keep track in this situation, you can use the tab menu. The menu allows you to quickly select the dockwidget you want to activate from a drop down menu. This flag shows / hides the tabs menu button in the dock area title bar. On the left side, the tabs menu button flag is cleared.

`DockAreaHideDisabledButtons`

If certain flags of a dock widget are disabled, like DockWidgetClosable or DockWidgetFloatable, then the corresponding dock area buttons like close button or detach button are disabled (greyed out). This is the default setting.

If the flag is set, disabled dock area buttons will not appear on the toolbar at all - they are hidden.

`DockAreaDynamicTabsMenuButtonVisibility`

If this flag is cleared, the the tabs menu button is always visible. This is the default setting. If the flag is set, the tabs menu button will be shown only when it is required - that means, if the tabs are elided.

If the tabs are not elided, the tabs menu button is hidden.

`FloatingContainerHasWidgetTitle`

If set (default), the floating widget window title reflects the title of the current dock widget.

otherwise it displays the title set with CDockManager::setFloatingContainersTitle or application name as window title.

`FloatingContainerHasWidgetIcon`

If set, the floating widget icon reflects the icon of the current dock widget

otherwise (default setting) it displays application icon.

`HideSingleCentralWidgetTitleBar`

If there is only one single visible dock widget in the main dock container (the dock manager) and if this flag is set, then the titlebar of this dock widget will be hidden. This only makes sense for non draggable and non floatable dock widgets and enables the creation of some kind of "central" static widget. Because the titlebar is hidden, it is not possible to drag out the central widget to make it floating or to close it via the close button.

Unless a central widget explicitly has been set with setCentralWidget, the Advanced Docking System is without a static central widget and it wouldn't know about a central static widget. Therefore this flag is disabled by default and a central single dock widget still has a titlebar to drag it out of the main window.

`FocusHighlighting`

If this is enabled, the docking system is able to highlight the tab and the components of a dock area with a different style (i.e. a different color). This option is disabled by default and needs to be enabled explicitly because it adds some overhead. The dock manager needs to react on focus changes and dock widget dragging to highlight the right dock widget. You should enable it only, if you really need it for your application.

If the feature is enabled, you can also connect to the new dock manager signal focusedDockWidgetChanged(CDockWidget* old, CDockWidget* now) to react on focus changes and to prepare the content of the focused dock widget.

You can click into the tab, the titlebar or the content of a dock widget to focus it.

For the focused dock widget and dock widget tab, the property focused will be set to true and you can use this property to style the focused dock widget differently. The picture above uses the following styling:

/* Color the tab with the highlight color */
ads--CDockWidgetTab[focused="true"]
{
    background: palette(highlight);
    border-color: palette(highlight);
}

/* Use a different colored close button icon to match the test color */
ads--CDockWidgetTab[focused="true"] > #tabCloseButton
{
	qproperty-icon: url(:/ads/images/close-button-focused.svg)
}

/* Make a hovered focused close button a little bit lighter */
ads--CDockWidgetTab[focused="true"] > #tabCloseButton:hover
{
	background: rgba(255, 255, 255, 48);
}

/* Make a pressed focused close button even more lighter */
ads--CDockWidgetTab[focused="true"] > #tabCloseButton:pressed
{
	background: rgba(255, 255, 255, 92);
}

/* Use a different color for the tab label */
ads--CDockWidgetTab[focused="true"] QLabel
{
    color: palette(light);
}

/* Paint a nice solid line for the whole title bar to create the illusion
   of an active tab */
ads--CDockAreaWidget[focused="true"] ads--CDockAreaTitleBar
{
	background: transparent;
	border-bottom: 2px solid palette(highlight);
	padding-bottom: 0px;
}

If you have a content widget that does not support focussing for some reason (like QVTKOpenGLStereoWidget from the VTK library), then you can manually switch the focus by reacting on mouse events. The following code shows, how to install en event filter on the QVTKOpenGLStereoWidget to properly switch the focus on QEvent::MouseButtonPress:

static ads::CDockWidget* createVTK2DWindow(QMenu* ViewMenu, QObject* EventFilter)
{
    QVTKOpenGLStereoWidget* qvtkOpenGLStereoWidget = new QVTKOpenGLStereoWidget;
    ads::CDockWidget* DockWidget = new ads::CDockWidget("2D Window");
    DockWidget->setWidget(qvtkOpenGLStereoWidget);
    qvtkOpenGLStereoWidget->installEventFilter(EventFilter);
    qvtkOpenGLStereoWidget->setProperty("DockWidget", QVariant::fromValue(DockWidget));
    return DockWidget;
}

Now we can use the event filter function to react on mouse events and then use the dock manager function setDockWidgetFocused() to switch the focus:

bool CMainWindow::eventFilter(QObject *watched, QEvent *event)
{
    if (event->type() == QEvent::MouseButtonPress)
    {
        QVTKOpenGLStereoWidget* vtkWidget =  qobject_cast<QVTKOpenGLStereoWidget*>(watched);
        auto vDockWidget = vtkWidget->property("DockWidget");
        ads::CDockWidget* DockWidget = nullptr;
        if (vDockWidget.isValid())
        {
            DockWidget = qvariant_cast<ads::CDockWidget*>(vDockWidget);
        }

        if (DockWidget)
        {
            d->DockManager->setDockWidgetFocused(DockWidget);
        }
    }
    return false;
}

`EqualSplitOnInsertion`

This flag configures how the space is distributed if a new dock widget is inserted into an existing dock area. The flag is disabled by default. If 3 dock widgets are inserted with the following code

d->DockManager->addDockWidget(ads::RightDockWidgetArea, DockWidget, EditorArea);

then this is the result, if the flag is disabled:

If the flag is enabled, then the space is equally distributed to all widgets in a splitter:

`FloatingContainerForceNativeTitleBar` (Linux only)

Since release 3.6 the library supports native title bars and window decorations for floating widgets on Linux (thanks to a user contribution). Native title bars and window decorations are supported by most Linux window managers, such as Compiz or Xfwm. Some window managers like KWin do not properly support this feature. Native floating widgets look better because of the native styling and the support all window manager features like snapping to window borders or maximizing. The library tries to detect the window manager during runtime and activates native window decorations if possible:

If you would like to overwrite this autodetection, then you can activate this flag to force native window titlebars. You can overwrite autodetection and this flag, if you set the environment variable ADS_UseNativeTitle to 0 or 1.

`FloatingContainerForceQWidgetTitleBar` (Linux only)

If your window manager (i.e. KWin) does not properly support native floating windows, the docking library falls back to QWidget based floating widget title bars.

If you would like to overwrite autodetection, then you can activate this flag to force QWidget based title bars. You can overwrite autodetection and this flag, if you set the environment variable ADS_UseNativeTitle to 0 or 1.

`MiddleMouseButtonClosesTab`

If the flag is set, the user can use the mouse middle button to close the tab under the mouse. So you do not need to exactly hit the tab close button to close tab. Just click with the middle mouse button on a tab like this is possible in various web browsers.

`DisableTabTextEliding`

Set this flag to disable eliding of tab texts in dock area tabs:

The flag is disabled by default and the text in all tabs is elided to show as many tabs as possible even if there is not much space:

`ShowTabTextOnlyForActiveTab`

Set this flag (default = false) to show label texts in dock area tabs only for active tabs. Inactive tabs only show their icon:

Auto-Hide Configuration Flags

Auto Hide Dock Widgets

The Advanced Docking System supports "Auto-Hide" functionality for all dock containers. The "Auto Hide" feature allows to display more information using less screen space by hiding or showing windows pinned to one of the four dock container borders.

Enabling this feature adds a button with a pin icon to each dock area.

By clicking this button, the current dock widget (or the complete area - depending on the configuration flags) will be pinned to a certain border. The border is chosen depending on the location of the dock area. If you click the pin button while holding down the Ctrl key, the whole dock area will be pinned to a certain border.

Pinning Auto-Hide Widgets to a certain border

If you would like to pin a dock widget or a dock area to a certain border, then you can right-click into the dock widget tab or into the dock area title bar to show the context menu. Then you can select the location via the Pin to menu:

Show / Hide Auto-Hide Widgets via Mouse Over

Normally Auto-Hide widgets are shown by clicking the Auto-Hide tab and hidden by clicking the Auto-Hide tab again or by clicking into any other dock widget in the same container. If the Auto-Hide config flag AutoHideShowOnMouseOver is set, the Auto-Hide widget is shown, if the user hovers over the Auto-Hide tab and is collapsed if the mouse cursor leaves the Auto-Hide widget. Showing and hiding by mouse click still works if this feature is enabled.

Drag & Drop to Auto-Hide

You can easily drag any dock widget or any floating widget to the borders of a window to pin it as a auto-hide tab in one of the 4 sidebars. If you drag a dock widget close the one of the four window borders, special drop overlays will be shown to indicate the drop area for auto-hide widgets:

Of course, this also works with dock areas:

If you drag a dock widget or dock area into a sidebar, then you even have control over where tabs are inserted. Simply drag your mouse over a specific auto-hide tab, and your dragged dock widget will be inserted before this tab. Drag to the sidebar area behind the last tab, and the dragged widget will be appended as last tab. In the following screen capture, the Image Viewer 1 will be inserted before the Table 0 Auto-Hide tab and the Image Viewer 2 is appended behind the last tab:

Auto-Hide Tab Insertion Order

It is also possible to drag Auto-Hide tabs to a new auto-hide position. That means, you can drag them to a different border or sidebar:

Auto-Hide Tab Sorting

You can drag Auto-Hide tabs to a new position in the current sidebar to sort them:

Auto-Hide Drag to Float / Dock

But that is not all. You can also simply move Auto-Hide tabs to another floating widget or dock them via drag and drop:

Auto-Hide Context Menu

All Auto-Hide tabs now have a context menu, that provides all the functionality that you know from Dock widget tabs. With the Pin To... item from the context menu it is very easy to move an Auto-Hide tab to a different Auto-Hide sidebar:

Adding Auto Hide Widgets

Adding an auto hide widget is similar to adding a dock widget, simply call dockManager->addAutoHideDockWidget().

CDockManager::setAutoHideConfigFlags(CDockManager::DefaultAutoHideConfig);
d->DockManager = new CDockManager(this);
CDockWidget* TableDockWidget = new CDockWidget("Table 1");
DockManager->addAutoHideDockWidget(SideBarLeft, TableDockWidget);

See autohide example or the demo application to learn how it works.

Setting Auto-Hide Flags

The Advanced Docking System has a number of global configuration flags to configure the Auto-Hide functionality. You should set the Auto-Hide flags before creating the dock manager instance. That means, you should set the Auto-Hide flags after setting the configuration flags.

CDockManager::setConfigFlag(CDockManager::FocusHighlighting, true);
CDockManager::setAutoHideConfigFlags(CDockManager::DefaultAutoHideConfig);
CDockManager::setAutoHideConfigFlag(CDockManager::AutoHideShowOnMouseOver, true);
...
d->DockManager = new CDockManager(this);

If you set the Auto-Hide flags, you can set individual flags using the function CDockManager::setAutoHideConfigFlag or you can set all flags using the function CDockManager::setAutoHideConfigFlags. Instead of settings all flags individually, it is better to pick a predefined set of configuration flags and then modify individual flags. The following predefined configurations are available

DefaultAutoHideConfig - default auto hide config

Pick one of those predefined configurations and then modify the following configurations flags to adjust the docking system to your needs.

`AutoHideFeatureEnabled`

Enables / disables the Auto-Hide functionality. Only if this flag is enabled, the other Auto-Hide flags will be evaluated.

`DockAreaHasAutoHideButton`

If this flag is set (default), then each dock area has a pin button in the title bar to toggle Auto-Hide state.

`AutoHideButtonTogglesArea`

If set, the the pin button in the dock area title bar toggles the complete area. If not set (default), then the pin button toggles the current active tab / dock widget and pressing the Ctrl key while clicking the pin button toggles the complete ara.

`AutoHideButtonCheckable`

Normally the pin button in the dock area title bar is not checkable. If this flag is set, then the button is checkable. That means, if button is checked, the dock widget is pinned.

`AutoHideSideBarsIconOnly`

Normally the Auto-Hide tabs show the icon and title of the dock widget:

You can set this flag, if you would like to have only icons in the Auto-Hide tabs instead of icon and dock widget title. If this is set, the Auto-Hide tab needs less space. The tooltip of each tab still shows the dock widget title.

`AutoHideShowOnMouseOver`

Normally Auto-Hide widgets are shown by clicking the Auto-Hide tab and hidden by clicking the Auto-Hide tab again or by clicking into any other dock widget in the same container. If this flag is set, the Auto-Hide widget is shown, if the user hovers over the Auto-Hide tab or if the users moves the mouse outside of the Auto-Hide widget. Showing and hiding my mouse click still works if this feature is enabled.

`AutoHideCloseButtonCollapsesDock`

Some users don't understand the distinction between closing an auto hide dock and collapsing an auto hide dock. This may lead to situations where they press the close button (losing the side tab widget) instead of simply clicking outside the auto hide dock (collapsing the dock).

If AutoHideCloseButtonCollapsesDock option is active, the close button in an auto hide widget collapses the auto hide widget instead of closing it.

If you enable the AutoHideHasMinimizeButton flag, you should disable this flag our you will have two buttons with minimize functionality.

`AutoHideHasCloseButton`

If this flag is set (default), then each auto hide widget has a close button:

The functionality of the close button (close or minimize) is configured by the AutoHideCloseButtonCollapsesDock flag.

`AutoHideHasMinimizeButton`

If this flag is set (disabled by default), then each auto hide widget has a minimize button.

`AutoHideOpenOnDragHover`

If this flag is set (disabled by default), then holding a dragging cursor hover an auto-hide collapsed dock's tab will open said dock:

Said dock must be set to accept drops to hide when cursor leaves its scope. See AutoHideDragNDropExample for more details.

DockWidget Feature Flags

`DockWidgetClosable`

If set, the dock widget will have a close button.

`DockWidgetMovable`

If a dock widget is movable, then it and can be moved to a new position in the current dock container. Disable this flag to prevent moving of a dock widget via mouse.

`DockWidgetFloatable`

If set, a dock widget can be dragged into a floating window.

`DockWidgetDeleteOnClose`

Deletes the dock widget and its content when it is closed.

`CustomCloseHandling`

Clicking the close button will not close the dock widget but emits the closeRequested() signal instead. This allows the application to implement a custom close handling.

`DockWidgetFocusable`

If this is enabled, a dock widget can get focus highlighting.

`DockWidgetForceCloseWithArea`

A dock widget will be closed when the dock area hosting it is closed. If the DockWidgetDeleteOnClose feature is enabled for a dock widget, then it will be deleted, if the user clicks the close button of this dock widget. If the user clicks the close button of the dock area that contains this widget, then only the visibility of the dock widget is toggled. If this feature flag is set, the closing the dock area also closes the dock widget. That means, if the dock widget feature DockWidgetDeleteOnClose is set for the dock widgets in a dock area, then all dock widgets will be deleted if the dock area is closed.

`NoTab`

A dock widget tab will never be shown if this flag is set.

`DeleteContentOnClose`

Deletes only the contained widget on close, keeping the dock widget intact and in place. Attempts to rebuild the contents widget on show if there is a widget factory set. See issue #365 for more details.

Central Widget

The Advanced Docking System has been developed to overcome the limitations of the native Qt docking system with its central widget concept. This was the reason that until version 3.6 of the library, there was no support for such thing like a central widget. Thanks to the contribution of a user the library now supports a central widget.

In the Advanced Docking System a central widget is a docking widget that is neither closable nor movable or floatable. A central widget has no title bar and so it is not possible for the user to hide, close or drag the central widget. If there is a central widget, then also the distribution of the sizes for the dock widgets around the central widget is different:

no central widget (default) - on resizing the available space is distributed to all dock widgets - the size of all dock widgets shrinks or grows
with central widget - on resizing only the central widget is resized - the dock widgets around the central widget keep their size (see the animation below)

To set a central widget, you just need to pass your central dock widget to the dock manager setCentralWidget function:

auto* CentralDockArea = DockManager->setCentralWidget(CentralDockWidget);

See the centralwidget example to learn how it works.

Note

The central widget needs to be the first dock widget that is added to the dock manager. The function does not work and returns a nullptr if there are already other dock widgets registered. So setCentralWidget should be the first function that you call when adding dock widgets.

Empty Dock Area

Some applications require a fixed DockArea that is always visible, even if it does not contain any DockWidgets. I.e. the DockArea is in this case a kind of central widget that is always visible (see this issue).

Since version 3.7.1 the advanced docking system supports this feature. The emptydockarea example shows how this can be implemented with the library. You just need to create a dock widget and set the feature flag CDockWidget::NoTab. This permanently hides the tab widget of this area and removes it from the tab menu. For this special dock widget you should also disable all other features (movable, closable and floatable) to prevent closing and moving of this widget. If you use the CDockManager::setCentralWidget function like in the example code below, then you don't need to disable these features because this is done in the setCentralWidget function.

QLabel* label = new QLabel();
label->setText("This is a DockArea which is always visible, even if it does not contain any DockWidgets.");
label->setAlignment(Qt::AlignCenter);
CDockWidget* CentralDockWidget = new CDockWidget("CentralWidget");
CentralDockWidget->setWidget(label);
CentralDockWidget->setFeature(ads::CDockWidget::NoTab, true);// set the flag before adding the widget to dock manager
auto* CentralDockArea = DockManager->setCentralWidget(CentralDockWidget);

Custom Close Handling

Normally clicking the close button of a dock widget will just hide the widget and the user can show it again using the toggleView() action of the dock widget. This is meant for user interfaces with a static amount of widgets. But the advanced docking system also supports dynamic dock widgets that will get deleted on close. If you set the dock widget flag DockWidgetDeleteOnClose for a certain dock widget, then it will be deleted as soon as you close this dock widget. This enables the implementation of user interfaces with dynamically created editors, like in word processing applications or source code development tools.

When an entire area is closed, the default behavior is to hide the dock widgets it contains regardless of the DockWidgetDeleteOnClose flag except if there is only one dock widget. In this special case, the DockWidgetDeleteOnClose flag is followed. This behavior can be changed by setting the DockWidgetForceCloseWithArea flag to all the dock widgets that needs to be closed with their area.

Styling

The Advanced Docking System supports styling via Qt Style Sheets. All components like splitters, tabs, buttons, titlebar and icons are styleable this way.

Disabling the Internal Style Sheet

The dock manager uses an internal stylesheet to style its components. That means, the style that you see in the demo application comes from the internal stylesheets that you will find in src/stylesheets folder. If you want to disable this internal stylesheet because your application uses its own, just call the function for settings the stylesheet with an empty string.

DockManager->setStyleSheet("");

Files

user-guide.md

Latest commit

History

user-guide.md

File metadata and controls

User Guide

Configuration Flags

Setting Configuration Flags

ActiveTabHasCloseButton

DockAreaHasCloseButton

DockAreaCloseButtonClosesTab

OpaqueSplitterResize

XmlAutoFormattingEnabled

XmlCompressionEnabled

TabCloseButtonIsToolButton

AllTabsHaveCloseButton

RetainTabSizeWhenCloseButtonHidden

DragPreviewIsDynamic

DragPreviewShowsContentPixmap

DragPreviewHasWindowFrame

AlwaysShowTabs

DockAreaHasUndockButton

DockAreaHasTabsMenuButton

DockAreaHideDisabledButtons

DockAreaDynamicTabsMenuButtonVisibility

FloatingContainerHasWidgetTitle

FloatingContainerHasWidgetIcon

HideSingleCentralWidgetTitleBar

FocusHighlighting

EqualSplitOnInsertion

FloatingContainerForceNativeTitleBar (Linux only)

FloatingContainerForceQWidgetTitleBar (Linux only)

MiddleMouseButtonClosesTab

DisableTabTextEliding

ShowTabTextOnlyForActiveTab