Home

GNU Radio Accelerator Device Support Project

Description

GNU Radio provides a flexible block-based interface for signal processing tasks. Historically GNU Radio signal processing blocks have been written in software but there is increasing need to offload complex signal processing algorithms to accelerator devices including GPUs, FPGAs, and DSPs. Many accelerated blocks have been created using GNU Radio's block interface but these blocks require manual handling of data movement to and from the accelerator device. The purpose of this project is to add accelerator device support directly to GNU Radio.

Project Goals

• Maintain backwards compatibility with all existing blocks (both in-tree and from OOT modules)
• Create flexible interface for creating "custom buffers" to support accelerated devices
  • Custom buffer interface provides necessary hooks to allow the scheduler to handle data movement
• Provide infrastructure to support "insert signal processing here" paradigm for common accelerator devices such as NVidia GPUs

High-level Plan

• Milestone 1 - completed: May 11, 2021
  • refactor existing code and create single mapped buffer abstraction
  • support single accelerated block (block responsible for data movement)
  • simple custom buffer interface
• Milestone 2 - completed: August 5, 2021
  • support multiple accelerated blocks with zero-copy between
  • more flexible custom buffer interface (scheduler handles data movement)

Overview and Usage

GNU Radio's block-based interface is very flexible and has allowed users to create their own accelerated blocks for some time. However, this approach has some limitations. In particular if the accelerator device requires special (DMA) buffers for data movement, the accelerator block must then copy data from the GNU Radio buffer into the device's buffer on the input path and vice versa on the output path. This process is inefficient and is known as the "double copy" problem as shown in the diagram above. Furthermore, in addition to the double copy inefficiency, accelerated blocks written in this fashion require the writer to manage data movement explicitly. While this is doable it may be challenging for a novice and off-putting for a user that wishes to concentrate on implementing a signal processing algorithm. The new accelerated block interface changes address both of these issues while (very importantly) maintaining backwards compatibility for all existing GNU Radio blocks.

Supporting Code

The accelerated block interface changes currently live in this repository however the intention is to upstream these changes into GNU Radio. The following repositories contain supporting code that is also intended to be upstreamed to the project but not directly into the main GNU Radio repository itself (NOTE: both of the repositories below require the accelerated block interface changes, also called "ngsched"):

• gr-cuda_buffer - This repository contains an OOT module containing the cuda_buffer class which is a "custom buffer" supporting the CUDA runtime for NVidia GPUs. This module is intended to be a base CUDA buffer implementation for CUDA blocks and can be used directly when writing CUDA accelerated blocks for NVidia GPUs.
• gr-blnxngsched - This repository contains an OOT module containing various examples of the accelerated block interface (aka "ngsched") changes. These blocks are described in a additional detail in the "Examples" section below. Note that the CUDA-related blocks in this OOT require cuda_buffer from gr-cuda-buffer.

Examples

• custom_buffer - A buffer object that shows a simple example for creating a custom buffer object. It uses normal host buffers and does not require any specific accelerator hardware.
• custom_buf_loopback - A loopback block that uses the custom_buffer class from above. It shows a very simple example of how to use a custom buffer object defined within an OOT module.
• cuda_fanout - (NOTE: requires CUDA and gr-cuda-buffer) A simple CUDA-based fanout block that utilizes block history.
• cuda_loopback - (NOTE: requires CUDA and gr-cuda-buffer) A CUDA-based loopback block that uses the cuda_buffer class from gr-cuda-buffer.
• cuda_mult - (NOTE: requires CUDA and gr-cuda-buffer) A CUDA-based complex multiplication block. This block has two inputs and one output.
• mixed_2_port_loopback - (NOTE: requires CUDA and gr-cuda-buffer) A loopback block that combines a CUDA-based loopback with a simple host loopback. This block has two inputs and two outputs. One input/output pair uses cuda_buffer while the other uses default GNU Radio host buffers.

How to Use a Custom Buffer

The following instructions illustrate how to write a block using a "custom buffer". These instructions use cuda_buffer from gr-cuda-buffer for example purposes but the same general concepts can be applied to any custom buffer class.

1. If the custom buffer class exists in a separate OOT module, install that OOT module in the same path prefix as the OOT module containing the block which will use the buffer class. For example, to use cuda_buffer, the gr-cuda-buffer OOT module must be installed in the same prefix.
2. In the implementation source file include the appropriate header file for the buffer class. For example, in new_block_impl.cc:

#include <cuda_buffer/cuda_buffer.h>

3. Next, within the block's constructor update the gr::ios_ignature to include the desired buffer's type. For example:

new_block_impl::new_block_impl()
    : gr::block("my_new_block",
                gr::io_signature::make(1 /* min inputs */, 1 /* max inputs */, 
                                       sizeof(input_type), cuda_buffer::type),
                gr::io_signature::make(1 /* min outputs */, 1 /*max outputs */, 
                                       sizeof(output_type), cuda_buffer::type))
{
    . . . 
}

4. Finally, the pointers passed to the block's work function will now be of the selected type. For the cuda_buffer class used in this example the pointers passed to the work function are not host accessible and should not be dereferenced on the host. Instead the pointers should be passed to a kernel invocation. Note that the pointer usage restrictions depend on the buffer class being used.

int new_block_impl::general_work(int noutput_items,
                                 gr_vector_int& ninput_items,
                                 gr_vector_const_void_star& input_items,
                                 gr_vector_void_star& output_items)
{
    // NOTE: in and out are *not* host accessible 
    const auto in = reinterpret_cast<const input_type*>(input_items[0]);
    auto out = reinterpret_cast<output_type*>(output_items[0]);

    // Launch kernel passing in and out as parameters
    . . .
}

Detailed Design

This section contains detailed design information for the changes introduced in the accelerated block interface.

Single Mapped Buffer Abstraction

The ability of the GNU Radio runtime to directly manipulate device-specific (aka "custom") buffers is a key aspect of the accelerated block interface changes. Integrating device-specific buffers into the runtime required several changes, the most significant of which is the refinement of the runtime buffer class and the creation of the single mapped buffer abstraction.

A GNU Radio flow graph contains a series of blocks where each pair of blocks is connected by a buffer. The "upstream" block writes (produces) to the buffer while the "downstream" block reads (consumes) from the buffer.

A GNU Radio buffer may have only one writer but multiple readers. The buffer class provides an abstraction over top of the underlying buffer itself. Likewise the buffer_reader class provides an abstraction for each reader, one or more buffer_reader instances are attached to each buffer instance. The underlying buffers, which the buffer class wraps, are very elegantly implemented circular buffers. The vmcircbuf class provides the circular buffer interface although several implementations exist. Fundamentally the vmcircbuf interface relies on virtual memory "double mapping" to provide the illusion of an automatically wrapping memory buffer (see https://www.gnuradio.org/blog/2017-01-05-buffers/ for additional details). This approach works very well for host buffers where the virtual memory mapping to the underlying physical memory can be manipulated but does not work well for device-specific buffers where the virtual memory mapping cannot be manipulated.

The single mapped buffer abstraction was created to provide a similar encapsulation for underlying buffers whose virtual memory mapping cannot be manipulated. This applies to the majority, if not all, device-specific buffers. One side effect of the single mapped buffer abstraction is that, unlike the traditional double mapped buffers, single mapped buffers require explicit management to handle wrapping from the end of the buffer back to the beginning. For trivial cases where the item consumption or production size aligns with the size of the buffer the index_add() and index_sub() functions handle wrapping automatically. However for more complex wrapping cases two callback functions are used to handle wrapping; they are described in detail in the Callback Functions section below.

Some refactoring was necessary to accommodate the new single mapped buffer abstraction alongside the existing double mapped buffer abstraction. The existing buffer class was refactored to be an abstract base class for underlying buffer wrapper abstractions. It provides the interface that those abstractions use to hook into the GNU Radio runtime. The buffer_double_mapped and buffer_single_mapped classes now derive from the buffer class and implement its interface (see the simplified class diagram below). The buffer_double_mapped class, as its name suggests, contains the double mapped buffer abstraction that was previously contained within the buffer class. The buffer_single_mapped class contains the new single mapped buffer abstraction that was added as part of the accelerated block interface changes.

The buffer_single_mapped class is itself an abstract class that represents the interface for single mapped buffers. In the diagram above the interface functions are listed in the gray box. Functions that are pure virtual, that is functions that must be overridden, are listed in bold. The remaining non-bold functions are all virtual, that is they may be overridden if specific customization is necessary. Device-specific "custom buffers" must derive from the buffer_single_mapped class and implement the interface, which includes the functions listed in bold at a minimum. Note that the host_buffer class is an example implementation of the interface using host buffers. Additional information about it is available in the host_buffer Class section below. The cuda_buffer and hip_buffer classes also derive from the buffer_single_mapped class but they reside externally in separate OOT modules.

Additional minor refactoring of the buffer_reader class was also necessary to support the single mapped buffer abstraction. The buffer_reader_sm ("sm" for single mapped) was created to customize the behavior of several buffer_reader functions when used with buffer_single_mapped derived classes. To support this, several functions in the buffer_reader class were marked virtual. The buffer_reader_sm then derives from buffer_reader and overrides those virtual functions. The buffer_reader class was also slightly refactored to redirect most calls back to the corresponding buffer object where possible. This refactoring eliminated the need to create a specific buffer_reader derived class to accompany each buffer_single_mapped derived class. That is, it should be possible to use buffer_reader_sm with any buffer_single_mapped derived class. For example, the host_buffer, cuda_buffer, and hip_buffer classes all utilized buffer_reader_sm without requiring their own corresponding specific derived classes.

host_buffer Class

The host_buffer class is included as an example buffer_single_mapped derived class that is intended to be used for testing in the qa_host_buffer.cc test module. As its name suggests the host_buffer class implements the buffer_single_mapped interface but using only host buffers and therefore does not require any specific accelerator device hardware.

Buffer Type

The buffer_type type (see include/gnuradio/buffer_type.h) was created to provide an easy mechanism to connect blocks with the potentially custom buffers that they intend to use. Furthermore buffer_type is intended do this in a type consistent way such that arbitrary buffer_single_mapped derived classes implementing "custom buffers" can be added easily via OOT modules. In addition to providing type information buffer_type instances also provide a mechanism, via a pointer to a simple factory function, to create the corresponding buffer derived class instance.

The buffer_type type itself is defined as:

typedef const buffer_type_base& buffer_type;

Each buffer_type instance is therefore a constant reference to singleton instance of a class derived from buffer_type_base. A macro function: MAKE_CUSTOM_BUFFER_TYPE(<classname>, <factory function pointer>) was created to facilitate easy creation of buffer_type clasess. The first argument is the desired name of the derived class, it must be unique for each unique buffer type. Within the macro function the class name argument will be prefixed with buftype_ resulting in a class named buftype_<classname>. The second argument to the macro function is a pointer of type factory_func_ptr to a simple factory function for creating buffer derived class instances of the corresponding type. Although not required it is recommended that the factory function be made a static function within the buffer derived class. Likewise it is also recommended that the buffer_type be included as a static member (called type by convention) within the buffer derived class.

Below is a simple example showing usage of MAKE_CUSTOM_BUFFER_TYPE for the fictional my_device_buffer class (my_device_buffer.h):

class my_device_buffer : public buffer_single_mapped
{
public:

    static buffer_type type;

    virtual ~my_device_buffer();

    // Required buffer_single_mapped functions omitted for brevity

    /*!
     * \brief Creates a new my_device_buffer object
     *
     * \return pointer to buffer base class
     */
    static buffer_sptr make_my_device_buffer(int nitems,
                                             std::size_t sizeof_item,
                                             uint64_t downstream_lcm_nitems,
                                             block_sptr link,
                                             block_sptr buf_owner);

private:

    /*!
     * \brief constructor is private.  Use the static make_my_device_buffer
     * function to create instances.
     */
    my_device_buffer(int nitems,
                     size_t sizeof_item,
                     uint64_t downstream_lcm_nitems,
                     block_sptr link,
                     block_sptr buf_owner);
};

// Create a buffer type
MAKE_CUSTOM_BUFFER_TYPE(MY_DEVICE, &my_device_buffer::make_my_device_buffer)

Within my_device_buffer.cc:

buffer_type my_device_buffer::type(buftype_MY_DEVICE{});

Note for interface consistency buffer_type is used by the buffer_double_mapped class too. The buffer_double_mapped class's buffer type value is buftype_DEFAULT_NON_CUSTOM. It is used transparently by the runtime for all existing blocks.

Replace Upstream

By convention GNU Radio blocks are responsible for allocating their (downstream) output buffer(s). Downstream blocks then attach their own buffer_reader instances to the corresponding output buffer. This presents a problem for accelerated blocks because most require use of a device-specific buffer for both the input data path and the output data path. To solve this problem additional logic was added to the flat_flowgraph::connect_block_inputs() function. The connect_block_inputs function iterates over the input connections for a given block and adds the necessary buffer_reader instances. It was modified to perform two additional actions:

1. First the upstream buffer type is compared to the block's output buffer type. If the buffers' types match or if the blocks's output buffer type is the default (buffer_double_mapped::type), no further action is taken. If the block's output buffer and the upstream buffer are both not the default type and not the same then a runtime error is produced. This case means that two incompatible accelerated blocks are connected to each other, which is not permitted. Finally, if the block's output buffer is not the default type but the upstream buffer is the default type, then the upstream block's output buffer (i.e. the upstream buffer) is replaced with a new buffer of the block's own output buffer type. The replace_buffer() function was added to the block class to handle buffer replacement when appropriate.

2. In addition to potentially replacing the upstream buffer the connect_block_inputs() function also calculates and set each buffer's "context". A buffer's context is represented by the buffer_context enumeration and represents the direction of data movement for data within the buffer. There are four possible values:

   • HOST_TO_HOST - both the upstream and downstream blocks are normal non-accelerated host blocks; this is the default context for blocks
   • HOST_TO_DEVICE - the upstream block is a normal host block while the downstream block is an accelerated block; within the buffer wrapper object data must be moved from the host to a device in order to be consumed by the downstream block
   • DEVICE_TO_HOST - the upstream block is an accelerated block while the downstream block is a normal host block; within the buffer wrapper object data must be moved from the device to the host in order to be consumed by the downstream block
   • DEVICE_TO_DEVICE - both the upstream and downstream blocks are accelerated blocks; within the buffer wrapper object some device-specific operation (possibly nothing) must be performed in order for the data to be consumed by the downstream block

   Note that not all all usages of the accelerated block interface and custom buffers exactly fit the chosen nomenclature. The names chosen were meant to reflect the most common logical use cases.

Additional details about how buffer context is used are described in the Data Movement section.

Callback Functions

As mentioned above the single mapped buffer abstraction requires explicit logic to handle wrapping from the end of the underlying buffer back to the beginning of the buffer. Two callback functions, input_blocked_callback() and output_blocked_callback(), were added to the buffer class interface to handle non-trivial wrapping cases.

The "input blocked" case occurs when the desired number of input items cannot be read even though additional input items may be available back at the beginning of the buffer. The input_blocked_callback() function of the buffer_reader class is called when the number of items available between the current read pointer and the end of a single mapped buffer is less than the minimum number required. It attempts to realign the available input data to be contiguous beginning at the start of the buffer so that it can be read.

In the above example, the reader needs to read three items however only two items are available until the end of the buffer is reached (shown in blue). Note that there are additional items ready to be read located at the beginning of the buffer (shown in green). The first step of the input_blocked_callback() is to copy the "down" to make room for the items located at the end of the buffer. Next, the items at the end of the buffer are copied into the now free space at the beginning of the buffer. Finally the read and write pointers are updated to reflect the changes. After the input_blocked_callback() has run the input reader is no longer blocked and can now read the three items it needs.

Similarly the "output blocked" case occurs when the desired number of output items cannot be written to the buffer. The output_blocked_callback() function of the buffer class is called when the space available between the current write pointer and the end of the buffer is less than the space required. It attempts to copy any unread data back to the beginning of the buffer and then reset the write pointer immediately after the data such that additional space is available for writing.

In the above example, the writer needs to write three items however space is only available for two items before the end of the buffer is reached. Note that unread data exists between the read pointer and write pointer (shown in blue). First, the output_blocked_callback() copies any unread data from its current location back to the beginning of the buffer. Next, the read and write pointers are adjusted such that the read pointer points to the unread data aligned at the beginning of the buffer and the write pointer points immediately after it. After the output_blocked_callback() has run the output reader is no longer blocked and the next three items can be written after the unread data.

Although it is possible to customize the implementation of the callback functions, it is not recommended. Instead, to connect buffer_single_mapped derived classes to the callback functions, two additional functions have been created input_blocked_callback_logic() and output_blocked_callback_logic(). Each function includes the logic to perform the general steps described in the examples above however the exact functions used for data movement within the buffer are abstracted and must be passed in as parameters (via function pointers) to each function. Specifically, buffer_single_mapped derived classes must implement two functions, memcpy() and memmove() that operate on the underlying device-specific buffer and behave in the same fashion as the standard C library functions of the same names. For convenience two function pointer types have been defined to be used for these two functions.

typedef void* (*memcpy_func_t)(void* dest, const void* src, std::size_t count);
typedef void* (*memmove_func_t)(void* dest, const void* src, std::size_t count);

In addition to the data movement functions, the underlying buffer on which to operate is also passed as an argument to the input_blocked_callback_logic() and output_blocked_callback_logic() functions. The input_blocked_callback() and output_blocked_callback() functions (which themselves must be implemented buffer_single_mapped derived class) must use a buffer's context to determine which underlying buffer pointer and corresponding data movement function pointers should be passed into the input_blocked_callback_logic() and output_blocked_callback_logic() functions.

Custom Lock Interface

Data Movement

post_work() context