chore(deps): update dependency @openzeppelin/contracts to v5

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
@openzeppelin/contracts (source)	4.9.6 -> 5.1.0

---

Release Notes

OpenZeppelin/openzeppelin-contracts (@​openzeppelin/contracts)

v5.1.0

Compare Source

Breaking changes

• ERC1967Utils: Removed duplicate declaration of the Upgraded, AdminChanged and BeaconUpgraded events. These events are still available through the IERC1967 interface located under the contracts/interfaces/ directory. Minimum pragma version is now 0.8.21.
• Governor, GovernorCountingSimple: The _countVote virtual function now returns an uint256 with the total votes casted. This change allows for more flexibility for partial and fractional voting. Upgrading users may get a compilation error that can be fixed by adding a return statement to the _countVote function.

Custom error changes

This version comes with changes to the custom error identifiers. Contracts previously depending on the following errors should be replaced accordingly:

• Replace Address.FailedInnerCall with Errors.FailedCall
• Replace Address.AddressInsufficientBalance with Errors.InsufficientBalance
• Replace Clones.Create2InsufficientBalance with Errors.InsufficientBalance
• Replace Clones.ERC1167FailedCreateClone with Errors.FailedDeployment
• Replace Clones.Create2FailedDeployment with Errors.FailedDeployment
• SafeERC20: Replace Address.AddressEmptyCode with SafeERC20FailedOperation if there is no code at the token's address.
• SafeERC20: Replace generic Error(string) with SafeERC20FailedOperation if the returned data can't be decoded as bool.
• SafeERC20: Replace generic SafeERC20FailedOperation with the revert message from the contract call if it fails.

Changes by category

General

• AccessManager, VestingWallet, TimelockController and ERC2771Forwarder: Added a public initializer function in their corresponding upgradeable variants. (#​5008)

Access

• AccessControlEnumerable: Add a getRoleMembers method to return all accounts that have role. (#​4546)
• AccessManager: Allow the onlyAuthorized modifier to restrict functions added to the manager. (#​5014)

Finance

• VestingWalletCliff: Add an extension of the VestingWallet contract with an added cliff. (#​4870)

Governance

• GovernorCountingFractional: Add a governor counting module that allows distributing voting power amongst 3 options (For, Against, Abstain). (#​5045)
• Votes: Set _moveDelegateVotes visibility to internal instead of private. (#​5007)

Proxy

• Clones: Add version of clone and cloneDeterministic that support sending value at creation. (#​4936)
• TransparentUpgradeableProxy: Make internal _proxyAdmin() getter have view visibility. (#​4688)
• ProxyAdmin: Fixed documentation for UPGRADE_INTERFACE_VERSION getter. (#​5031)

Tokens

• ERC1363: Add implementation of the token payable standard allowing execution of contract code after transfers and approvals. (#​4631)
• ERC20TemporaryApproval: Add an ERC-20 extension that implements temporary approval using transient storage, based on ERC7674 (draft). (#​5071)
• SafeERC20: Add "relaxed" function for interacting with ERC-1363 functions in a way that is compatible with EOAs. (#​4631)
• SafeERC20: Document risks of safeIncreaseAllowance and safeDecreaseAllowance when associated with ERC-7674. (#​5262)
• ERC721Utils and ERC1155Utils: Add reusable libraries with functions to perform acceptance checks on IERC721Receiver and IERC1155Receiver implementers. (#​4845)
• ERC1363Utils: Add helper similar to the existing ERC721Utils and ERC1155Utils. (#​5133)

Utils

• Arrays: add a sort functions for address[], bytes32[] and uint256[] memory arrays. (#​4846)
• Arrays: add new functions lowerBound, upperBound, lowerBoundMemory and upperBoundMemory for lookups in sorted arrays with potential duplicates. (#​4842)
• Arrays: deprecate findUpperBound in favor of the new lowerBound. (#​4842)
• Base64: Add encodeURL following section 5 of RFC4648 for URL encoding (#​4822)
• Comparator: A library of comparator functions, useful for customizing the behavior of the Heap structure. (#​5084)
• Create2: Bubbles up returndata from a deployed contract that reverted during construction. (#​5052)
• Create2, Clones: Mask computeAddress and cloneDeterministic outputs to produce a clean value for an address type (i.e. only use 20 bytes) (#​4941)
• Errors: New library of common custom errors. (#​4936)
• Hashes: A library with commonly used hash functions. (#​3617)
• Packing: Added a new utility for packing, extracting and replacing bytesXX values. (#​4992)
• Panic: Add a library for reverting with panic codes. (#​3298)
• ReentrancyGuardTransient: Added a variant of ReentrancyGuard that uses transient storage. (#​4988)
• Strings: Added a utility function for converting an address to checksummed string. (#​5067)
• SlotDerivation: Add a library of methods for derivating common storage slots. (#​4975)
• TransientSlot: Add primitives for operating on the transient storage space using a typed-slot representation. (#​4980)

Cryptography

• SignatureChecker: refactor isValidSignatureNow to avoid validating ECDSA signatures if there is code deployed at the signer's address. (#​4951)
• MerkleProof: Add variations of verify, processProof, multiProofVerify and processMultiProof (and equivalent calldata version) with support for custom hashing functions. (#​4887)
• P256: Library for verification and public key recovery of P256 (aka secp256r1) signatures. (#​4881)
• RSA: Library to verify signatures according to RFC 8017 Signature Verification Operation (#​4952)

Math

• Math: add an invMod function to get the modular multiplicative inverse of a number in Z/nZ. (#​4839)
• Math: Add modExp function that exposes the EIP-198 precompile. Includes uint256 and bytes memory versions. (#​3298)
• Math: Custom errors replaced with native panic codes. (#​3298)
• Math, SignedMath: Add a branchless ternary function that computescond ? a : b in constant gas cost. (#​4976)
• SafeCast: Add toUint(bool) for operating on bool values as uint256. (#​4878)

Structures

• CircularBuffer: Add a data structure that stores the last N values pushed to it. (#​4913)
• DoubleEndedQueue: Custom errors replaced with native panic codes. (#​4872)
• EnumerableMap: add UintToBytes32Map, AddressToAddressMap, AddressToBytes32Map and Bytes32ToAddressMap. (#​4843)
• Heap: A data structure that implements a heap-based priority queue. (#​5084)
• MerkleTree: A data structure that allows inserting elements into a merkle tree and updating its root hash. (#​3617)

v5.0.2

Compare Source

• Base64: Fix issue where dirty memory located just after the input buffer is affecting the result. (#​4926)

v5.0.1

Compare Source

• ERC2771Context and Context: Introduce a _contextPrefixLength() getter, used to trim extra information appended to msg.data.
• Multicall: Make aware of non-canonical context (i.e. msg.sender is not _msgSender()), allowing compatibility with ERC2771Context.

v5.0.0

Compare Source

Additions Summary

The following contracts and libraries were added:

• AccessManager: A consolidated system for managing access control in complex systems.
  • AccessManaged: A module for connecting a contract to an authority in charge of its access control.
  • GovernorTimelockAccess: An adapter for time-locking governance proposals using an AccessManager.
  • AuthorityUtils: A library of utilities for interacting with authority contracts.
• GovernorStorage: A Governor module that stores proposal details in storage.
• ERC2771Forwarder: An ERC2771 forwarder for meta transactions.
• ERC1967Utils: A library with ERC1967 events, errors and getters.
• Nonces: An abstraction for managing account nonces.
• MessageHashUtils: A library for producing digests for ECDSA operations.
• Time: A library with helpers for manipulating time-related objects.

Removals Summary

The following contracts, libraries, and functions were removed:

• Address.isContract (because of its ambiguous nature and potential for misuse)
• Checkpoints.History
• Counters
• ERC20Snapshot
• ERC20VotesComp
• ERC165Storage (in favor of inheritance based approach)
• ERC777
• ERC1820Implementer
• GovernorVotesComp
• GovernorProposalThreshold (deprecated since 4.4)
• PaymentSplitter
• PullPayment
• SafeMath
• SignedSafeMath
• Timers
• TokenTimelock (in favor of VestingWallet)
• All escrow contracts (Escrow, ConditionalEscrow and RefundEscrow)
• All cross-chain contracts, including AccessControlCrossChain and all the vendored bridge interfaces
• All presets in favor of OpenZeppelin Contracts Wizard

These removals were implemented in the following PRs: #​3637, #​3880, #​3945, #​4258, #​4276, #​4289

Changes by category

General

• Replaced revert strings and require statements with custom errors. (#​4261)
• Bumped minimum compiler version required to 0.8.20 (#​4288, #​4489)
• Use of abi.encodeCall in place of abi.encodeWithSelector and abi.encodeWithSignature for improved type-checking of parameters (#​4293)
• Replaced some uses of abi.encodePacked with clearer alternatives (e.g. bytes.concat, string.concat). (#​4504) (#​4296)
• Overrides are now used internally for a number of functions that were previously hardcoded to their default implementation in certain locations: ERC1155Supply.totalSupply, ERC721.ownerOf, ERC721.balanceOf and ERC721.totalSupply in ERC721Enumerable, ERC20.totalSupply in ERC20FlashMint, and ERC1967._getImplementation in ERC1967Proxy. (#​4299)
• Removed the override specifier from functions that only override a single interface function. (#​4315)
• Switched to using explicit Solidity import statements. Some previously available symbols may now have to be separately imported. (#​4399)
• Governor, Initializable, and UUPSUpgradeable: Use internal functions in modifiers to optimize bytecode size. (#​4472)
• Upgradeable contracts now use namespaced storage (EIP-7201). (#​4534)
• Upgradeable contracts no longer transpile interfaces and libraries. (#​4628)

Access

• Ownable: Added an initialOwner parameter to the constructor, making the ownership initialization explicit. (#​4267)
• Ownable: Prevent using address(0) as the initial owner. (#​4531)
• AccessControl: Added a boolean return value to the internal _grantRole and _revokeRole functions indicating whether the role was granted or revoked. (#​4241)
• access: Moved AccessControl extensions to a dedicated directory. (#​4359)
• AccessManager: Added a new contract for managing access control of complex systems in a consolidated location. (#​4121)
• AccessManager, AccessManaged, GovernorTimelockAccess: Ensure that calldata shorter than 4 bytes is not padded to 4 bytes. (#​4624)
• AccessManager: Use named return parameters in functions that return multiple values. (#​4624)
• AccessManager: Make schedule and execute more conservative when delay is 0. (#​4644)

Finance

• VestingWallet: Fixed revert during 1 second time window when duration is 0. (#​4502)
• VestingWallet: Use Ownable instead of an immutable beneficiary. (#​4508)

Governance

• Governor: Optimized use of storage for proposal data (#​4268)
• Governor: Added validation in ERC1155 and ERC721 receiver hooks to ensure Governor is the executor. (#​4314)
• Governor: Refactored internals to implement common queuing logic in the core module of the Governor. Added queue and _queueOperations functions that act at different levels. Modules that implement queuing via timelocks are expected to override _queueOperations to implement the timelock-specific logic. Added _executeOperations as the equivalent for execution. (#​4360)
• Governor: Added voter and nonce parameters in signed ballots, to avoid forging signatures for random addresses, prevent signature replay, and allow invalidating signatures. Add voter as a new parameter in the castVoteBySig and castVoteWithReasonAndParamsBySig functions. (#​4378)
• Governor: Added support for casting votes with ERC-1271 signatures by using a bytes memory signature instead of r, s and v arguments in the castVoteBySig and castVoteWithReasonAndParamsBySig functions. (#​4418)
• Governor: Added a mechanism to restrict the address of the proposer using a suffix in the description.
• GovernorStorage: Added a new governor extension that stores the proposal details in storage, with an interface that operates on proposalId, as well as proposal enumerability. This replaces the old GovernorCompatibilityBravo module. (#​4360)
• GovernorTimelockAccess: Added a module to connect a governor with an instance of AccessManager, allowing the governor to make calls that are delay-restricted by the manager using the normal queue workflow. (#​4523)
• GovernorTimelockControl: Clean up timelock id on execution for gas refund. (#​4118)
• GovernorTimelockControl: Added the Governor instance address as part of the TimelockController operation salt to avoid operation id collisions between governors using the same TimelockController. (#​4432)
• TimelockController: Changed the role architecture to use DEFAULT_ADMIN_ROLE as the admin for all roles, instead of the bespoke TIMELOCK_ADMIN_ROLE that was used previously. This aligns with the general recommendation for AccessControl and makes the addition of new roles easier. Accordingly, the admin parameter and timelock will now be granted DEFAULT_ADMIN_ROLE instead of TIMELOCK_ADMIN_ROLE. (#​3799)
• TimelockController: Added a state getter that returns an OperationState enum. (#​4358)
• Votes: Use Trace208 for checkpoints. This enables EIP-6372 clock support for keys but reduces the max supported voting power to uint208. (#​4539)

Metatx

• ERC2771Forwarder: Added deadline for expiring transactions, batching, and more secure handling of msg.value. (#​4346)
• ERC2771Context: Return the forwarder address whenever the msg.data of a call originating from a trusted forwarder is not long enough to contain the request signer address (i.e. msg.data.length is less than 20 bytes), as specified by ERC-2771. (#​4481)
• ERC2771Context: Prevent revert in _msgData() when a call originating from a trusted forwarder is not long enough to contain the request signer address (i.e. msg.data.length is less than 20 bytes). Return the full calldata in that case. (#​4484)

Proxy

• ProxyAdmin: Removed getProxyAdmin and getProxyImplementation getters. (#​3820)
• TransparentUpgradeableProxy: Removed admin and implementation getters, which were only callable by the proxy owner and thus not very useful. (#​3820)
• ERC1967Utils: Refactored the ERC1967Upgrade abstract contract as a library. (#​4325)
• TransparentUpgradeableProxy: Admin is now stored in an immutable variable (set during construction) to avoid unnecessary storage reads on every proxy call. This removed the ability to ever change the admin. Transfer of the upgrade capability is exclusively handled through the ownership of the ProxyAdmin. (#​4354)
• Moved the logic to validate ERC-1822 during an upgrade from ERC1967Utils to UUPSUpgradeable. (#​4356)
• UUPSUpgradeable, TransparentUpgradeableProxy and ProxyAdmin: Removed upgradeTo and upgrade functions, and made upgradeToAndCall and upgradeAndCall ignore the data argument if it is empty. It is no longer possible to invoke the receive function (or send value with empty data) along with an upgrade. (#​4382)
• BeaconProxy: Reject value in initialization unless a payable function is explicitly invoked. (#​4382)
• Proxy: Removed redundant receive function. (#​4434)
• BeaconProxy: Use an immutable variable to store the address of the beacon. It is no longer possible for a BeaconProxy to upgrade by changing to another beacon. (#​4435)
• Initializable: Use the namespaced storage pattern to avoid putting critical variables in slot 0. Allow reinitializer versions greater than 256. (#​4460)
• Initializable: Use intermediate variables to improve readability. (#​4576)

Token

• ERC20, ERC721, ERC1155: Deleted _beforeTokenTransfer and _afterTokenTransfer hooks, added a new internal _update function for customizations, and refactored all extensions using those hooks to use _update instead. (#​3838, #​3876, #​4377)
• ERC20: Removed Approval event previously emitted in transferFrom to indicate that part of the allowance was consumed. With this change, allowances are no longer reconstructible from events. See the code for guidelines on how to re-enable this event if needed. (#​4370)
• ERC20: Removed the non-standard increaseAllowance and decreaseAllowance functions. (#​4585)
• ERC20Votes: Changed internal vote accounting to reusable Votes module previously used by ERC721Votes. Removed implicit ERC20Permit inheritance. Note that the DOMAIN_SEPARATOR getter was previously guaranteed to be available for ERC20Votes contracts, but is no longer available unless ERC20Permit is explicitly used; ERC-5267 support is included in ERC20Votes with EIP712 and is recommended as an alternative. (#​3816)
• SafeERC20: Refactored safeDecreaseAllowance and safeIncreaseAllowance to support USDT-like tokens. (#​4260)
• SafeERC20: Removed safePermit in favor of documentation-only permit recommendations. Based on recommendations from @​trust1995 (#​4582)
• ERC721: _approve no longer allows approving the owner of the tokenId. (#​4377) _setApprovalForAll no longer allows setting address(0) as an operator. (#​4377)
• ERC721: Renamed _requireMinted to _requireOwned and added a return value with the current owner. Implemented ownerOf in terms of _requireOwned. (#​4566)
• ERC721Consecutive: Added a _firstConsecutiveId internal function that can be overridden to change the id of the first token minted through _mintConsecutive. (#​4097)
• ERC721URIStorage: Allow setting the token URI prior to minting. (#​4559)
• ERC721URIStorage, ERC721Royalty: Stop resetting token-specific URI and royalties when burning. (#​4561)
• ERC1155: Optimized array allocation. (#​4196)
• ERC1155: Removed check for address zero in balanceOf. (#​4263)
• ERC1155: Optimized array accesses by skipping bounds checking when unnecessary. (#​4300)
• ERC1155: Bubble errors triggered in the onERC1155Received and onERC1155BatchReceived hooks. (#​4314)
• ERC1155Supply: Added a totalSupply() function that returns the total amount of token circulating, this change will restrict the total tokens minted across all ids to 2**256-1 . (#​3962)
• ERC1155Receiver: Removed in favor of ERC1155Holder. (#​4450)

Utils

• Address: Removed the ability to customize error messages. A common custom error is always used if the underlying revert reason cannot be bubbled up. (#​4502)
• Arrays: Added unsafeMemoryAccess helpers to read from a memory array without checking the length. (#​4300)
• Arrays: Optimized findUpperBound by removing redundant SLOAD. (#​4442)
• Checkpoints: Library moved from utils to utils/structs (#​4275)
• DoubleEndedQueue: Refactored internal structure to use uint128 instead of int128. This has no effect on the library interface. (#​4150)
• ECDSA: Use unchecked arithmetic for the tryRecover function that receives the r and vs short-signature fields separately. (#​4301)
• EIP712: Added internal getters for the name and version strings (#​4303)
• Math: Makes ceilDiv to revert on 0 division even if the numerator is 0 (#​4348)
• Math: Optimized stack operations in mulDiv. (#​4494)
• Math: Renamed members of Rounding enum, and added a new rounding mode for "away from zero". (#​4455)
• MerkleProof: Use custom error to report invalid multiproof instead of reverting with overflow panic. (#​4564)
• MessageHashUtils: Added a new library for creating message digest to be used along with signing or recovery such as ECDSA or ERC-1271. These functions are moved from the ECDSA library. (#​4430)
• Nonces: Added a new contract to keep track of user nonces. Used for signatures in ERC20Permit, ERC20Votes, and ERC721Votes. (#​3816)
• ReentrancyGuard, Pausable: Moved to utils directory. (#​4551)
• Strings: Renamed toString(int256) to toStringSigned(int256). (#​4330)
• Optimized Strings.equal (#​4262)

How to migrate from 4.x

ERC20, ERC721, and ERC1155

These breaking changes will require modifications to ERC20, ERC721, and ERC1155 contracts, since the _afterTokenTransfer and _beforeTokenTransfer functions were removed. Thus, any customization made through those hooks should now be done overriding the new _update function instead.

Minting and burning are implemented by _update and customizations should be done by overriding this function as well. _transfer, _mint and _burn are no longer virtual (meaning they are not overridable) to guard against possible inconsistencies.

For example, a contract using ERC20's _beforeTokenTransfer hook would have to be changed in the following way.

-function _beforeTokenTransfer(
+function _update(
   address from,
   address to,
   uint256 amount
 ) internal virtual override {
-  super._beforeTokenTransfer(from, to, amount);
   require(!condition(), "ERC20: wrong condition");
+  super._update(from, to, amount);
 }

More about ERC721

In the case of ERC721, the _update function does not include a from parameter, as the sender is implicitly the previous owner of the tokenId. The address of this previous owner is returned by the _update function, so it can be used for a posteriori checks. In addition to to and tokenId, a third parameter (auth) is present in this function. This parameter enabled an optional check that the caller/spender is approved to do the transfer. This check cannot be performed after the transfer (because the transfer resets the approval), and doing it before _update would require a duplicate call to _ownerOf.

In this logic of removing hidden SLOADs, the _isApprovedOrOwner function was removed in favor of a new _isAuthorized function. Overrides that used to target the _isApprovedOrOwner should now be performed on the _isAuthorized function. Calls to _isApprovedOrOwner that preceded a call to _transfer, _burn or _approve should be removed in favor of using the auth argument in _update and _approve. This is showcased in ERC721Burnable.burn and in ERC721Wrapper.withdrawTo.

The _exists function was removed. Calls to this function can be replaced by _ownerOf(tokenId) != address(0).

More about ERC1155

Batch transfers will now emit TransferSingle if the batch consists of a single token, while in previous versions the TransferBatch event would be used for all transfers initiated through safeBatchTransferFrom. Both behaviors are compliant with the ERC-1155 specification.

ERC165Storage

Users that were registering EIP-165 interfaces with _registerInterface from ERC165Storage should instead do so by overriding the supportsInterface function as seen below:

function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
  return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
}

SafeMath

Methods in SafeMath superseded by native overflow checks in Solidity 0.8.0 were removed along with operations providing an interface for revert strings. The remaining methods were moved to utils/Math.sol.

- import "@​openzeppelin/contracts/utils/math/SafeMath.sol";
+ import "@​openzeppelin/contracts/utils/math/Math.sol";

 function tryOperations(uint256 x, uint256 y) external view {
-  (bool overflowsAdd, uint256 resultAdd) = SafeMath.tryAdd(x, y);
+  (bool overflowsAdd, uint256 resultAdd) = Math.tryAdd(x, y);
-  (bool overflowsSub, uint256 resultSub) = SafeMath.trySub(x, y);
+  (bool overflowsSub, uint256 resultSub) = Math.trySub(x, y);
-  (bool overflowsMul, uint256 resultMul) = SafeMath.tryMul(x, y);
+  (bool overflowsMul, uint256 resultMul) = Math.tryMul(x, y);
-  (bool overflowsDiv, uint256 resultDiv) = SafeMath.tryDiv(x, y);
+  (bool overflowsDiv, uint256 resultDiv) = Math.tryDiv(x, y);
   // ...
 }

Adapting Governor modules

Custom Governor modules that override internal functions may require modifications if migrated to v5. In particular, the new internal functions _queueOperations and _executeOperations may need to be used. If assistance with this migration is needed reach out via the OpenZeppelin Support Forum.

ECDSA and MessageHashUtils

The ECDSA library is now focused on signer recovery. Previously it also included utility methods for producing digests to be used with signing or recovery. These utilities have been moved to the MessageHashUtils library and should be imported if needed:

 import {ECDSA} from "@​openzeppelin/contracts/utils/cryptography/ECDSA.sol";
+import {MessageHashUtils} from "@​openzeppelin/contracts/utils/cryptography/MessageHashUtils.sol";

 contract Verifier {
   using ECDSA for bytes32;
+  using MessageHashUtils for bytes32;

   function _verify(bytes32 data, bytes memory signature, address account) internal pure returns (bool) {
     return data
       .toEthSignedMessageHash()
       .recover(signature) == account;
   }
 }

Interfaces and libraries in upgradeable contracts

The upgradeable version of the contracts library used to include a variant suffixed with Upgradeable for every contract. These variants, which are produced automatically, mainly include changes for dealing with storage that don't apply to libraries and interfaces.

The upgradeable library no longer includes upgradeable variants for libraries and interfaces. Projects migrating to 5.0 should replace their library and interface imports with their corresponding non-upgradeable version:

 // Libraries
-import {AddressUpgradeable} from '@​openzeppelin/contracts-upgradeable/utils/AddressUpgradeable.sol';
+import {Address} from '@​openzeppelin/contracts/utils/Address.sol';

 // Interfaces
-import {IERC20Upgradeable} from '@​openzeppelin/contracts-upgradeable/interfaces/IERC20.sol';
+import {IERC20} from '@​openzeppelin/contracts/interfaces/IERC20.sol';

Offchain Considerations

Some changes may affect offchain systems if they rely on assumptions that are changed along with these new breaking changes. These cases are:

Relying on revert strings for processing errors

A concrete example is AccessControl, where it was previously advised to catch revert reasons using the following regex:

/^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/

Instead, contracts now revert with custom errors. Systems that interact with smart contracts outside of the network should consider reliance on revert strings and possibly support the new custom errors.

Relying on storage locations for retrieving data

After 5.0, the storage location of some variables were changed. This is the case for Initializable and all the upgradeable contracts since they now use namespaced storaged locations. Any system relying on storage locations for retrieving data or detecting capabilities should be updated to support these new locations.

---

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box

---

This PR was generated by Mend Renovate. View the repository job log.

[vercel]

The latest updates on your projects. Learn more about Vercel for Git ↗︎

Name	Status	Preview	Comments	Updated (UTC)
dapp-token-ico	❌ Failed (Inspect)			Oct 17, 2024 1:31pm

[changeset-bot]

⚠️ No Changeset found

Latest commit: e772618

Merging this PR will not cause a version bump for any packages. If these changes should not result in a new version, you're good to go. If these changes should result in a version bump, you need to add a changeset.

Click here to learn what changesets are, and how to add one.

Click here if you're a maintainer who wants to add a changeset to this PR

[coderabbitai]

Important

Review skipped

Bot user detected.

To trigger a single review, invoke the @coderabbitai review command.

You can disable this status message by setting the reviews.review_status to false in the CodeRabbit configuration file.

---

Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media?

Share

• X
• Mastodon
• Reddit
• LinkedIn

Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>.
  • Generate unit testing code for this file.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai generate unit testing code for this file.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai generate interesting stats about this repository and render them as a table.
  • @coderabbitai show all the console.log statements in this repository.
  • @coderabbitai read src/utils.ts and generate unit testing code.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.
  • @coderabbitai help me debug CodeRabbit configuration file.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (invoked as PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger an incremental review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai full review to do a full review from scratch and review all the files again.
• @coderabbitai summary to regenerate the summary of the PR.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai configuration to show the current CodeRabbit configuration for the repository.
• @coderabbitai help to get help.

Additionally, you can add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.

CodeRabbit Configration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.

[socket-security]

No dependency changes detected. Learn more about Socket for GitHub ↗︎

👍 No dependency changes detected in pull request

[sweep-ai]

Hey @renovate[bot], here is an example of how you can ask me to improve this pull request:

@Sweep Add unit tests for the new `Arrays.sort` functions to verify correct sorting behavior for address[], bytes32[] and uint256[] arrays, including edge cases like empty arrays and arrays with duplicate values.

📖 For more information on how to use Sweep, please read our documentation.