What am I missing here ? System stuck at "Monitor Health : System Initializing."

[Primer-Merc]

Checklist

• I made sure that there are no existing issues or discussions - open issues,closed issues,open discussion, closed discussion - which may answer my question or that I could contribute my information to.
• I have read the Known Issues Wiki Page and my question / issue is not listed.
• I have provided the version of the software and the operating system in my post.
• If I have an issue with genmon not communicating with the controller, I have read and followed the serial troubleshooting guide.
• I have included the generator make and model in my submission.

Version

Generator Monitor Version : V1.19.04
Platform Stats :
CPU Utilization : 2.28%
OS Name : Debian GNU/Linux
OS Version : 12 (bookworm
Generac EVO 2 Controller Generac 26kw
Data Transport Method :
USR-TCP232-306 Serial over TCP

Have you submitted your log files from the About page? Note that outbound email must be working for logs to be submitted.

I have submitted logs

What is/are your question(s)?

Not sure what's happening here. After several hours of switching wires, changing settings, I was finally to get both send/and receive from the USR-TCP232-306 to my Genmon server instance. As you can see from the screenshots They are connected and sending data to each other.

****** IMPORTANT*****
I have no way of verifying if the USR-TCP232-306 is receiving/sending data from/to the EVO Controller though. Any ideas based on the included screenshots and included logs.

Most relevant info in the logs will be the most recent time wise. I have not changed anything for the past 2 hours ( log time).

Additional information

Below are screen shots of the USR web login, genmon web login, USR-MO settings page, USR-TCP test page( not receiving data) and a TeraTerm terminal screen logged into the USR.

[Primer-Merc]

Some additional progress / information. New logs have been uploaded. I am now getting data using the USR-TCP Test suite.

Does the EF9D have any relationship to the modbus slave address of 9d?

[Primer-Merc]

Another update and I will close this.

I decided to try and run this in a DOCKER container after watching this video. https://www.youtube.com/watch?v=w0zPj9yBtZE&t=1s

I already had CasaOS, and all the files are ready to go as an APP inside CasaOS . That fixed it. I just needed to plug in my settings for the USR TCP to Serial device in the settings menu, and everything popped up.

-Kyle-

[jgyates]

@Primer-Merc

I am glad you got it working. Let me know if you have any other questions.