-
-
- Nothing yet. +
- Better tab styling +
- Supported Hardware is now Options & Support +
- Options & Support section is generated from a single file, simplifying updates. +
- Upgrade guide is simpler and clearer.
-
diff --git a/0.9.11/img/components/comp_fp_blank.webp b/0.9.11/img/components/comp_fp_blank.webp
new file mode 100755
index 00000000..e0b180b8
Binary files /dev/null and b/0.9.11/img/components/comp_fp_blank.webp differ
diff --git a/0.9.11/img/components/comp_fp_hex.webp b/0.9.11/img/components/comp_fp_hex.webp
new file mode 100755
index 00000000..346bbb8b
Binary files /dev/null and b/0.9.11/img/components/comp_fp_hex.webp differ
diff --git a/0.9.11/img/components/comp_fp_sd.png b/0.9.11/img/components/comp_fp_sd.png
new file mode 100755
index 00000000..7616f892
Binary files /dev/null and b/0.9.11/img/components/comp_fp_sd.png differ
diff --git a/0.9.11/img/components/comp_fp_sd.webp b/0.9.11/img/components/comp_fp_sd.webp
new file mode 100755
index 00000000..a7da3be1
Binary files /dev/null and b/0.9.11/img/components/comp_fp_sd.webp differ
diff --git a/0.9.11/img/components/comp_fp_sd_usbb.png b/0.9.11/img/components/comp_fp_sd_usbb.png
new file mode 100755
index 00000000..e87b19a1
Binary files /dev/null and b/0.9.11/img/components/comp_fp_sd_usbb.png differ
diff --git a/0.9.11/img/components/comp_fp_sd_usbb.webp b/0.9.11/img/components/comp_fp_sd_usbb.webp
new file mode 100755
index 00000000..ccdaeca7
Binary files /dev/null and b/0.9.11/img/components/comp_fp_sd_usbb.webp differ
diff --git a/0.9.11/img/components/comp_fp_sd_usbc.png b/0.9.11/img/components/comp_fp_sd_usbc.png
new file mode 100755
index 00000000..a5f7ed9c
Binary files /dev/null and b/0.9.11/img/components/comp_fp_sd_usbc.png differ
diff --git a/0.9.11/img/components/comp_fp_sd_usbc.webp b/0.9.11/img/components/comp_fp_sd_usbc.webp
new file mode 100755
index 00000000..8aa03365
Binary files /dev/null and b/0.9.11/img/components/comp_fp_sd_usbc.webp differ
diff --git a/0.9.11/img/components/comp_fp_slats.webp b/0.9.11/img/components/comp_fp_slats.webp
new file mode 100755
index 00000000..be31f72d
Binary files /dev/null and b/0.9.11/img/components/comp_fp_slats.webp differ
diff --git a/0.9.11/img/components/comp_fp_slots.webp b/0.9.11/img/components/comp_fp_slots.webp
new file mode 100755
index 00000000..5fd462b1
Binary files /dev/null and b/0.9.11/img/components/comp_fp_slots.webp differ
diff --git a/0.9.11/img/components/comp_fp_vent.png b/0.9.11/img/components/comp_fp_vent.png
new file mode 100755
index 00000000..0dbeb2bf
Binary files /dev/null and b/0.9.11/img/components/comp_fp_vent.png differ
diff --git a/0.9.11/img/components/comp_fp_vent.webp b/0.9.11/img/components/comp_fp_vent.webp
new file mode 100755
index 00000000..be31f72d
Binary files /dev/null and b/0.9.11/img/components/comp_fp_vent.webp differ
diff --git a/0.9.11/img/components/comp_mw_lrs350.webp b/0.9.11/img/components/comp_mw_lrs350.webp
new file mode 100755
index 00000000..e965c767
Binary files /dev/null and b/0.9.11/img/components/comp_mw_lrs350.webp differ
diff --git a/0.9.11/img/components/comp_mw_lrs450.webp b/0.9.11/img/components/comp_mw_lrs450.webp
new file mode 100755
index 00000000..232f0b39
Binary files /dev/null and b/0.9.11/img/components/comp_mw_lrs450.webp differ
diff --git a/0.9.11/img/components/comp_mw_lrs600.webp b/0.9.11/img/components/comp_mw_lrs600.webp
new file mode 100755
index 00000000..17f9083b
Binary files /dev/null and b/0.9.11/img/components/comp_mw_lrs600.webp differ
diff --git a/0.9.11/img/components/comp_mw_rsp200.webp b/0.9.11/img/components/comp_mw_rsp200.webp
new file mode 100755
index 00000000..09430c3d
Binary files /dev/null and b/0.9.11/img/components/comp_mw_rsp200.webp differ
diff --git a/0.9.11/img/components/comp_mw_rsp500.webp b/0.9.11/img/components/comp_mw_rsp500.webp
new file mode 100755
index 00000000..6e0dd7ff
Binary files /dev/null and b/0.9.11/img/components/comp_mw_rsp500.webp differ
diff --git a/0.9.11/img/components/fp_styles.webp b/0.9.11/img/components/fp_styles.webp
new file mode 100755
index 00000000..37e6be8e
Binary files /dev/null and b/0.9.11/img/components/fp_styles.webp differ
diff --git a/0.9.11/search/search_index.json b/0.9.11/search/search_index.json
index 9dba111e..cc7040b1 100755
--- a/0.9.11/search/search_index.json
+++ b/0.9.11/search/search_index.json
@@ -1 +1 @@
-{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"","title":"OmniBox v0.9.11","text":""},{"location":"#about-omnibox","title":"About OmniBox","text":"
- There are no affiliate links used on this site.
- The shopping cart icon indicates an external link to a shopping website.
- These links are not an endorsement and are for reference only.
- The design allows for longer-than-specified screws in many locations. The assembly guide notes where substitutions can be made.
- Wiring is only specified for the IEC power socket, power switch, and power supply. Additional wiring and fusing considerations are configuration-specific.
- Short: LANMU MicroSD Card Reader Extension
- Long: ELECTOP MicroSD Card Reader Extension
- Lighting
- Webcam
- Thermistor (temperature sensor)
- Temperature-controlled exhaust fan
- Always-on filtration fan
OmniBox is a 3D printable, modular electronics case for 3D printers. It supports a wide variety of parts and includes templates to add new ones.
This project is loosely derived from Steve Burcham's Stand Alone Main Control Case V3. It is released under the MIT License and is distributed free of charge.
Tip
To change documentation versions, select a version number from the drop down box at the top of the page.
To switch between Light and Dark reading mode, click the icon next to the search box.
"},{"location":"#quick-links","title":"Quick Links","text":""},{"location":"#getting-started","title":"Getting Started","text":"Visual Guided Tour Bill of Materials Supported Products
"},{"location":"#guides","title":"Guides","text":"Printing Guide Assembly Guide Upgrade Guide
"},{"location":"#community-links","title":"Community Links","text":"Discord Server GitHub Discussions
"},{"location":"#current-status","title":"Current Status","text":"A complete OmniBox made of parts from one release is tested to fit and work together. The developer completes at least two full builds for each release and new releases are also community-tested. The Version History page contains information on the latest release, fixes, new features, and known issues.
"},{"location":"#upgrading","title":"Upgrading","text":"Trays and panels are typically compatible between releases. Recent Core case versions may be partially upgraded rather than entirely reprinted. See the Upgrade Guide for details.
"},{"location":"bom/","title":"Bill of Materials","text":"The Universal Bill of Materials is a base list common to all builds. Additional components (including fasteners) are listed separately below.
These parts are common to all case builds. See below for additional requirements based on configuration.
Item Qty UOM Note PLA+ or PETG filament 2 kg Typical use is less than 1.5kg (PLA+). TPU 95A filament 0.05 kg Optional. Quantity is maximum estimated. 16 awg/1.25mm stranded hookup wire 0.5 m Prefer red. Spade connectors, 14-16 awg, Female, Insulated 3 ea Fork connectors, 14-16 awg, #8, Insulated 1 ea Ring connectors can be used as well. IEC C14 socket with fuse 1 ea Glass Fuse, 5x20mm 1 ea See note below. Compatible power switch 1 ea See the Power Switch section. Compatible MCU 1 ea See the Supported Parts list. Compatible display 1 ea See the Supported Parts list. Compatible PSU 1 ea See the Supported Parts list.Note: Glass Fuses
Socket fuses do not replace the fuses on your board or inline fuses.
Users will typically want to fuse with fast or medium blow fuses on the socket. Determining the correct fuse for a given configuration is beyond the scope of this documentation. The Oznium blog has an excellent guide on choosing a fuse size.
Note: Wiring and Connectors
Additional connectors and wiring may be needed, including for grounding your bed/frame to earth.
"},{"location":"bom/#core-configurations","title":"Core Configurations","text":""},{"location":"bom/#fasteners","title":"Fasteners","text":""},{"location":"bom/#cap-screws","title":"Cap Screws","text":"OmniBox is largely compatible with both M3 socket head cap screws (SHCS) and button head cap screws (BHCS). Core assembly has several recessed screw holes that are not compatible with button head screws; otherwise, button head screws can be used freely in place of socket head screws.
All sourcing links are for SHCS.
Note: PSUs
Power supplies mount using M4 screws.
"},{"location":"bom/#hsi-builds","title":"HSI Builds","text":"Cases with heat set inserts (HSI) use shorter fasteners in many locations.
If using HSIs, an M3 soldering iron tip for heat set inserts is recommended.
"},{"location":"bom/#fastener-bom","title":"Fastener BOM","text":"The lists below are the minimum required for an OmniBox build. The Supported Parts section contains breakdowns of all parts required for every component.
Stock (No HSI)HSIFull HSI Fasteners Qty UOM Note M3 x 6mm machine screws 4 ea M3 x 8mm machine screws 52 ea M3 x 10mm machine screws 6 ea May use 12mm instead. M3 x 12mm machine screws 8 ea M3 x 20mm machine screws 2 ea #6 x 3/4\" sharp point wood screws 8 ea See note below. Fasteners Qty UOM Note Heat Set Insert, M3, 5mm O.D. x 4mm L 24 ea See note below. M3 x 6mm machine screws 24 ea M3 x 8mm machine screws 36 ea M3 x 10mm machine screws 2 ea May use 12mm instead. M3 x 12mm machine screws 8 ea M3 x 20mm machine screws 2 ea #6 x 3/4\" sharp point wood screws 8 ea See note below. Fasteners Qty UOM Note Heat Set Insert, M3, 5mm O.D. x 4mm L 76 ea See note below. M3 x 6mm machine screws 48 ea M3 x 8mm machine screws 20 ea M3 x 10mm machine screws 2 ea May use 12mm instead. M3 x 12mm machine screws 8 ea M3 x 20mm machine screws 2 eaNote: Sharp Point Wood Screws
To substitute #6 x 3/4\" with Metric screws, use M3 x 16mm or M3 x 20mm. Equivalent length machine screws can also be used if sharp point screws are unavailable.
The \"Full HSI\" base versions do not require wood screws.
Heat Set Inserts
Starting with v0.9.10, OmniBox exclusively uses \"Voron-style\" (M3 x 5mm O.D. x 4mm Length) heat set inserts. User-contributed parts that require inserts also use these inserts.
"},{"location":"bom/#power-switch","title":"Power Switch","text":"The Front Base comes in a \"rocker\" or \"toggle\" version.
You will need one of the following:
29mm x 10.5mm SPST snap-in rocker switch
Supports any power supply.
12mm or 12.5mm SPST toggle switch
Supported by smaller power supplies (e.g., Mean Well LRS-350).
"},{"location":"bom/#front-base-fans","title":"Front Base Fans","text":"The base can mount up to three concealed 40mm fans in the intakes. The below are needed to mount each fan:
Item Qty UOM Note 40x40x10mm axial fan 1 ea M3 x 16mm machine screws 4 ea Some fans have recesses that instead use 10-12mm screws."},{"location":"bom/#rear-main-body-fans","title":"Rear Main Body Fans","text":"The rear body has two versions: one with dual fans and one without any.
Quad 40mm FansNo Exhaust FansThis version can mount up to four (4) internal 40mm fans. Unoccupied fan mounts act as vents.
The list below is for each 40mm fan.
Item Qty UOM Note 40x40x10mm axial fans 1 ea M3 x 16mm machine screws 4 eaThere are no additional materials required for this version.
Warning
This rear main body should be used with a rear panel or lid that provides an exhaust fan and/or large vents.
"},{"location":"bom/#tray-and-panel-configurations","title":"Tray and Panel Configurations","text":"The Universal Bill of Materials includes the fasteners needed to mount panels and the the required trays. It does not include the hardware needed to attach electronics to those panels and trays.
The Supported Parts Overview has a full list of parts and mounting locations. Some configurations require additional fasteners or fans.
"},{"location":"bom/#psu-trays","title":"PSU Trays","text":"Power supplies are notable for mounting to the tray with M4 x 6mm cap screws. See the list of supported PSUs for quantities.
Note: M4 Screws
Earlier OmniBox revisions required M4 BHCS. Both socket head and button head are now supported.
"},{"location":"bom/#lower-bay-trays","title":"Lower Bay Trays","text":"Each tray (short or long) uses four (4) M3 x 6mm screws to mount the tray. Additional materials are listed on the Lower Bay Components page.
"},{"location":"bom/#panel-mounted-parts","title":"Panel Mounted Parts","text":"Panel mounts are a way of providing external connectors to internal parts, such as the MCU or CPU board USB ports. The Panel Mounts page discusses this in more detail.
"},{"location":"bom/#microsd-reader-extensions","title":"MicroSD Reader Extensions","text":"Each MCU tray on the MCU support page has a field for whether a short or long MicroSD card reader extension is necessary (if using one for the front panel).
Enclosed 3D printing requires controlling more hardware than comes with a typical 3D printer:
Most electronics will overheat in the 50C (120F) or higher ambient temperatures of a well-insulated enclosure. I printed my first of Steve Burcham's cases to remove my electronics from such heat; OmniBox is derived from his work.
"},{"location":"development/#flexibility-and-accessibility","title":"Flexibility and Accessibility","text":"Devices like fans and lights--and Raspberry Pis!--need a buck converter lower the voltage from a 3D printer's power supply. My cases soon were cramped with bucks. Each one mounted on a tray above the microcontroller unit (MCU); wiring changes to the MCU required that I first remove up to three buck converter trays.
"},{"location":"development/#ample-room","title":"Ample Room","text":"After I discovered BIGTREETECH's Octopus in another project, I wanted a case for it. The Octopus does not fit the cases I had already printed; I also had several ideas to improve upon Steve's case.
With these requirements and goals in mind, I decided to design my own case.
"},{"location":"development/#early-development-gallery","title":"Early Development Gallery","text":"These photos detail some of the evolution of Steve's original case into OmniBox.
Development Photos The initial main body prototype, looking awkward. Size comparison: Left is an example of Steve's V5 case (with custom panels). On the right is one of the first OmniBoxes during assembly. The first and second finished case bodies, waiting for more panels to finish printing. Testing for fit with all of the connectors in place. Closed up for the first time, front view. Closed up for the first time, rear view."},{"location":"license/","title":"License & Contributing","text":""},{"location":"license/#license","title":"License","text":"OmniBox and its documentation are released under the MIT License. OmniBox is free of charge, but donations are welcome to help offset development costs.
MIT License\n\nCopyright (c) 2022-2023 Jon Harper\n\nPermission is hereby granted, free of charge, to any person obtaining a copy\nof this software and associated documentation files (the \"Software\"), to deal\nin the Software without restriction, including without limitation the rights\nto use, copy, modify, merge, publish, distribute, sublicense, and/or sell\ncopies of the Software, and to permit persons to whom the Software is\nfurnished to do so, subject to the following conditions:\n\nThe above copyright notice and this permission notice shall be included in all\ncopies or substantial portions of the Software.\n\nTHE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\nIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\nFITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\nAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\nLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\nOUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\nSOFTWARE.\nNote: This section is in progress.
Users may contribute directly or indirectly to OmniBox. Accepted contributions are accredited in the documentation.
"},{"location":"license/#direct-contribution","title":"Direct Contribution","text":"Direct contributions to OmniBox are completed through git:
- Fork the OmniBox
unstablebranch. - Add your files in the correct subfolder (e.g. an MCU tray belongs under
/Trays/MCU/[Product Name]). - Submit a pull request to merge your files.
If you would prefer to contribute your changes under a different license or otherwise upload them elsewhere, consider Printables.com. Users who do not contribute directly have (so far) chosen to upload to Printables.
- Upload your file to Printables or another site.
- Open an Issue on GitHub with a link to your file(s).
- If the link does not include installation instructions, include them in the issue.
This page has common settings for printing OmniBox and a printed component checklist. See the guided tour for help choosing the correct parts.
"},{"location":"printing/#recommended-materials","title":"Recommended Materials","text":"Modified PLA
OmniBox prints best with modified PLA, usually called PLA+ or PLA Pro.
Unmodified PLA
Sometimes called Basic PLA, unmodified PLA prints easily but is a rigid and weak material. Unmodified PLA prints at lower temperatures and is usually cheaper than modified PLA. Use modified PLA instead.
PETG
Printing in PETG typically takes longer than PLA but otherwise produces good results.
Note
Fan gaskets are an optional noise reducer and require TPU.
"},{"location":"printing/#3d-print-settings","title":"3D Print Settings","text":"These settings are consistent for all parts except the TPU fan gaskets.
Setting Value Notes Layer Height 0.16-0.25mm Coarser settings have not been tested. Adaptive Layer Height Optional Can improve appearance and reduce print time. Perimeters (Walls) See below Correct value depends on material. Infill 20-25% Cubic is a good tradeoff for time and durability. Nozzle Diameter 0.4mm, 0.6mm If you print a case with a different nozzle size, please share your results! Support Overhang Angle >= 60 degrees This reduces print time & support material."},{"location":"printing/#material-specific-settings","title":"Material-Specific Settings","text":"PLA
Print with 1.2mm or thicker walls (3 perimeters with a 0.4mm nozzle). 1.5mm+ results in solid Main Body side walls.
PETG
Use 1.6mm walls/perimeters (1.8mm for 0.6mm nozzles).
"},{"location":"printing/#support-settings","title":"Support Settings","text":"- Supports must be on for the main body.
- The base may be printed without supports.
- Support blockers are recommended for all zip tie anchors and fastener holes.
- For large parts (e.g., the rear main body) use a brim, adhesive, or both.
- Cantilever bed printers (where the bed is supported by a single Z stepper; e.g., Ender 5 Pro) should move heavier prints to the supported side of the bed.
- If printing in a drafty room, consider a partial enclosure to help layer adhesion.
- Long lids will fit on 220x220mm beds if printed without a skirt or brim.
This is a checklist of types parts to print. See the Guided Tour for help selecting the right STL files from the git repository.
"},{"location":"printing/#core-base","title":"Core: Base","text":"Print a Front Base and a Rear Base. A Unified Base may be printed instead if you have a print bed with least 300mm on one axis.
See the Base section of the Tour for more information.
Front & Rear
Base - Front
Base - Rear
Unified and Unified Extended
Base - Unified
"},{"location":"printing/#core-main-body","title":"Core: Main Body","text":"Print one (1) version of each of the Crossbar, Front Main Body, and Rear Main Body. See the Main Body section of the Tour for help choosing versions to print.
Main Body - Crossbar
Main Body - Front
Main Body - Rear
"},{"location":"printing/#trays","title":"Trays","text":"Component Quantity Required Notes PSU Tray 1 Yes MCU Tray 1 Yes CPU Tray 0-1 No Typically only one (1). Takes the place of a side panel. Lower Bay Trays 0-6 No Type and quantity are specific to configuration."},{"location":"printing/#panels","title":"Panels","text":"Component Quantity Required Notes Display Mount 1 Yes Lid 1-2 Yes One (1) long lid or two (2) short lids. Rear Panel 1 Yes Bottom Panel 1 Yes Side Panel 3-4 Yes Four (4) side panels, minus the number of CPU trays installed."},{"location":"printing/#other-components","title":"Other Components","text":"Component Quantity Required Notes Fan Cages Varies Yes Quantity and type depend on configuration. Fan Gaskets Varies No Optional add-on to fan cages. Power Switch Cover 1 No Recommended cover for rocker switches."},{"location":"sourcing/","title":"Sourcing","text":"This page lists sources for (ideally all) parts used with OmniBox.
"},{"location":"sourcing/#bearings","title":"Bearings","text":""},{"location":"sourcing/#688zz-radial-ball-bearing","title":"688ZZ Radial Ball Bearing","text":"Source Ships To Ships From Note Amazon.com (USA) US US 5 pcs"},{"location":"sourcing/#buck-converter","title":"Buck Converter","text":""},{"location":"sourcing/#basic-lm2596","title":"Basic LM2596","text":"Source Ships To Ships From Note Amazon.com (USA) US US 3 pcs"},{"location":"sourcing/#drok-2a-lm2596-with-led","title":"DROK 2A LM2596 with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#drok-3a-lm2596-with-led","title":"DROK 3A LM2596 with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#drok-5a-buck-with-led","title":"DROK 5A Buck with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#hiletgo-2a-lm2596-with-led","title":"HiLetGo 2A LM2596 with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#connector-extension","title":"Connector Extension","text":""},{"location":"sourcing/#hdmi-keystone-jack","title":"HDMI Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US Coupler only, no cable"},{"location":"sourcing/#microsd-extension-15cm","title":"MicroSD Extension, 15cm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#microsd-extension-48cm","title":"MicroSD Extension, 48cm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#rj45-keystone-jack","title":"RJ45 Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US Coupler only, no cable"},{"location":"sourcing/#rj45-panel-mount","title":"RJ45 Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#usb-2-type-a-panel-mount","title":"USB 2 Type A Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#usb-2-type-b-panel-mount","title":"USB 2 Type B Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-3-dual-panel-mount","title":"USB 3 Dual Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-3-type-a-panel-mount","title":"USB 3 Type A Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#usb-30-keystone-jack","title":"USB 3.0 Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-c-keystone-jack","title":"USB C Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-c-panel-mount-extension","title":"USB C Panel Mount Extension","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#xt60e-f-female-panel-mount","title":"XT60E-F Female Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2pcs"},{"location":"sourcing/#xt60e-m-male-panel-mount","title":"XT60E-M Male Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#cpu","title":"CPU","text":""},{"location":"sourcing/#raspberry-pi-3b-1gb","title":"Raspberry Pi 3B+ 1GB","text":"Source Ships To Ships From Note Digikey Worldwide Worldwide"},{"location":"sourcing/#raspberry-pi-4b-2gb","title":"Raspberry Pi 4B+ 2GB","text":"Source Ships To Ships From Note Digikey Worldwide Worldwide"},{"location":"sourcing/#din-7380","title":"DIN 7380","text":""},{"location":"sourcing/#m3-x-6mm-bhcs","title":"M3 x 6mm BHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-8mm-bhcs","title":"M3 x 8mm BHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#din-912","title":"DIN 912","text":""},{"location":"sourcing/#m25-x-6mm-shcs","title":"M2.5 x 6mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-10mm-shcs","title":"M3 x 10mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-12mm-shcs","title":"M3 x 12mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-14mm-shcs","title":"M3 x 14mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-15mm-shcs","title":"M3 x 15mm SHCS","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-16mm-shcs","title":"M3 x 16mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-18mm-shcs","title":"M3 x 18mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-20mm-shcs","title":"M3 x 20mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-22mm-shcs","title":"M3 x 22mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-25mm-shcs","title":"M3 x 25mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-30mm-shcs","title":"M3 x 30mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-35mm-shcs","title":"M3 x 35mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-40mm-shcs","title":"M3 x 40mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-45mm-shcs","title":"M3 x 45mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-4mm-shcs","title":"M3 x 4mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-50mm-shcs","title":"M3 x 50mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-5mm-shcs","title":"M3 x 5mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-6mm-shcs","title":"M3 x 6mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-8mm-shcs","title":"M3 x 8mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US"},{"location":"sourcing/#m4-x-10mm-shcs","title":"M4 x 10mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-12mm-shcs","title":"M4 x 12mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-14mm-shcs","title":"M4 x 14mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-16mm-shcs","title":"M4 x 16mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-20mm-shcs","title":"M4 x 20mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-25mm-shcs","title":"M4 x 25mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-30mm-shcs","title":"M4 x 30mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-35mm-shcs","title":"M4 x 35mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-6mm-shcs","title":"M4 x 6mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-8mm-shcs","title":"M4 x 8mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#display","title":"Display","text":""},{"location":"sourcing/#bigtreetech-35-tft","title":"Bigtreetech 3.5\" TFT","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-35-tft-e3","title":"Bigtreetech 3.5\" TFT E3","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-5-pi-tft","title":"Bigtreetech 5\" Pi TFT","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-hdmi5","title":"Bigtreetech HDMI5","text":"Source Ships To Ships From Note Biqu/Bigtreetech Worldwide CN, US, EU, CA AliExpress Worlwide Worldwide"},{"location":"sourcing/#generic-128x64-display","title":"Generic 128x64 Display","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#mini-12864-display","title":"Mini 12864 Display","text":"Source Ships To Ships From Note Amazon.com (USA) US US FYSETC brand AliExpress Worlwide Worldwide Bigtreetech brand"},{"location":"sourcing/#raspberry-pi-7-tft","title":"Raspberry Pi 7\" TFT","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#electrical-connector","title":"Electrical Connector","text":""},{"location":"sourcing/#iec-c14-socket-with-fuse-holder","title":"IEC C14 Socket with Fuse Holder","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#insulated-fork-connector-8-14-16-awg","title":"Insulated Fork Connector, #8, 14-16 awg","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#insulated-spade-connector-female-14-16-awg","title":"Insulated Spade Connector, Female, 14-16 awg","text":"Source Ships To Ships From Note Amazon.com (USA) US US 100 pcs"},{"location":"sourcing/#jst-sm-kit","title":"JST SM Kit","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2-5 Position"},{"location":"sourcing/#jst-xh-connector-kit","title":"JST XH Connector Kit","text":"Source Ships To Ships From Note KB-3D Worldwide US 2-4 Position Amazon.com (USA) US US 2-6 Position"},{"location":"sourcing/#molex-microfit-30-kit","title":"Molex MicroFit 3.0 Kit","text":"Source Ships To Ships From Note KB-3D Worldwide US 2-4 Position"},{"location":"sourcing/#wago-221-412-2-position-lever-nut","title":"Wago 221-412 2-Position Lever Nut","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#wago-221-413-3-position-lever-nut","title":"Wago 221-413 3-Position Lever Nut","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#wago-221-415-5-position-lever-nut","title":"Wago 221-415 5-Position Lever Nut","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#fan","title":"Fan","text":""},{"location":"sourcing/#120mm-x-25mm-axial-fan","title":"120mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#40mm-x-10mm-axial-fan","title":"40mm x 10mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#40mm-x-20mm-axial-fan","title":"40mm x 20mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#50mm-x-10mm-axial-fan","title":"50mm x 10mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#50mm-x-12mm-axial-fan","title":"50mm x 12mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#50mm-x-15mm-axial-fan","title":"50mm x 15mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#60mm-x-15mm-axial-fan","title":"60mm x 15mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#60mm-x-20mm-axial-fan","title":"60mm x 20mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#60mm-x-25mm-axial-fan","title":"60mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#80mm-x-20mm-axial-fan","title":"80mm x 20mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#80mm-x-25mm-axial-fan","title":"80mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#92mm-x-25mm-axial-fan","title":"92mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#filament","title":"Filament","text":""},{"location":"sourcing/#petg-filament-1kg","title":"PETG Filament, 1kg","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#plapla-pro-filament-1kg","title":"PLA+/PLA Pro Filament, 1kg","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#mcu","title":"MCU","text":""},{"location":"sourcing/#bigtreetech-manta-e3-ez","title":"Bigtreetech Manta E3 EZ","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-manta-m5p","title":"Bigtreetech Manta M5P","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide Amazon.com (USA) US US"},{"location":"sourcing/#bigtreetech-manta-m8p","title":"Bigtreetech Manta M8P","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide M8P Version 2.0 Amazon.com (USA) US US"},{"location":"sourcing/#bigtreetech-octopus-series","title":"Bigtreetech Octopus Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-3","title":"Bigtreetech SKR 3","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-3-ez","title":"Bigtreetech SKR 3 EZ","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-e3-series","title":"Bigtreetech SKR E3 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide SKR Mini E3 V3.0"},{"location":"sourcing/#bigtreetech-skr-pico","title":"Bigtreetech SKR Pico","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-v13-20","title":"Bigtreetech SKR v1.3-2.0","text":"Source Ships To Ships From Note Amazon.com (USA) US US SKR 1.4 Turbo AliExpress Worlwide Worldwide SKR 1.4 Turbo"},{"location":"sourcing/#bigtreetech-skrat","title":"Bigtreetech SKRat","text":"Source Ships To Ships From Note Fabreeko Worldwide US Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#creality-2x-series","title":"Creality 2.x Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#creality-4x-series","title":"Creality 4.x Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#duet3d-duet-3-6hc","title":"Duet3D Duet 3 6HC","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#duet3d-duet-3-mini-5","title":"Duet3D Duet 3 Mini 5+","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#fysetc-spider-series","title":"FYSETC Spider Series","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide"},{"location":"sourcing/#mks-monster8","title":"MKS Monster8","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide"},{"location":"sourcing/#mks-skipr","title":"MKS Skipr","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide"},{"location":"sourcing/#other-electrical","title":"Other Electrical","text":""},{"location":"sourcing/#bigtreetech-relay-12","title":"Bigtreetech Relay 1.2","text":"Source Ships To Ships From Note Biqu/Bigtreetech Worldwide CN, US, EU, CA"},{"location":"sourcing/#bigtreetech-u2c-can-adapter","title":"Bigtreetech U2C CAN Adapter","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#bigtreetech-ups-24v","title":"Bigtreetech UPS 24V","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide Amazon.com (USA) US US"},{"location":"sourcing/#creality-mosfet","title":"Creality MOSFET","text":"Source Ships To Ships From Note Tiny Machines US US"},{"location":"sourcing/#fotek-ssr-40-da","title":"Fotek SSR-40 DA","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#glass-fuse-5mm-x-20mm-fast-blow","title":"Glass Fuse, 5mm x 20mm, Fast Blow","text":"Source Ships To Ships From Note"},{"location":"sourcing/#omron-g3nag3a-solid-state-relay","title":"Omron G3NA/G3A Solid State Relay","text":"Source Ships To Ships From Note KB-3D Worldwide US Digikey Worldwide Worldwide G3NA-210B-UTU-DC5-24"},{"location":"sourcing/#stranded-hookup-wire-16-awg125mm2","title":"Stranded Hookup Wire, 16 awg/1.25mm2","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#other-fasteners","title":"Other Fasteners","text":""},{"location":"sourcing/#6-x-34-wood-screw","title":"#6 x 3/4\" Wood Screw","text":"Note
To substitute #6 x 3/4\" with Metric screws, use M3 x 16mm or M3 x 20mm. Machine screws can also be used, if necessary.
Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US 100 pcs"},{"location":"sourcing/#m25-brass-standoff-femalemale-10mm-6mm","title":"M2.5 Brass Standoff, Female/Male, 10mm + 6mm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#m25-brass-standoff-femalemale-12mm-6mm","title":"M2.5 Brass Standoff, Female/Male, 12mm + 6mm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-5mm-od-x-4mm-l-insert","title":"M3 x 5mm OD x 4mm L Insert","text":"Source Ships To Ships From Note Amazon.com (USA) US US 120pk Fabreeko Worldwide US 100pk KB-3D Worldwide US Sold as eaches."},{"location":"sourcing/#psu","title":"PSU","text":""},{"location":"sourcing/#mean-well-lrs-350-series","title":"Mean Well LRS-350 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-lrs-450-series","title":"Mean Well LRS-450 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-lrs-600-series","title":"Mean Well LRS-600 Series","text":"Source Ships To Ships From Note StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-rs-25-5","title":"Mean Well RS-25-5","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-rsp-500-series","title":"Mean Well RSP-500 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-se-450-series","title":"Mean Well SE-450 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#switch","title":"Switch","text":""},{"location":"sourcing/#spst-rocker-switch-29mm-x-105mm-panel-mount","title":"SPST Rocker Switch, 29mm x 10.5mm Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#spst-toggle-switch-12mm-panel-mount","title":"SPST Toggle Switch, 12mm Panel Mount","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide Amazon.com (USA) US US"},{"location":"tour/","title":"Guided Tour","text":"This is a visual tour of an OmniBox. This page demonstrates:
- The core parts of OmniBox and their variations;
- Trays and panels; and
- How these pieces fit together.
The configuration in the image above will be our example in this guide. We will start with the Core components and move on to the trays and panels that make OmniBox so modular.
"},{"location":"tour/#links","title":"Links","text":"Links on this site to external resources have prefix icons to identify what they do:
- The git icon is used for links to the OmniBox GitHub.
- identifies an example link to a shopping site.
Internal page links in this tour are marked with an arrow sign.
"},{"location":"tour/#core-components","title":"Core Components","text":"Core components form the basis of every case. End-user parts normally do not attach to core components; instead, user parts are attached to trays and panels, which then mount on the Core case.
Note: Heat Set Inserts (HSI)
Most Core components come with the option of using heat set inserts to attach most trays and panels. These STL files have \"HSI\" in the name.
The assembled core components of an OmniBox.
There are two (2) types of Core components: Base and Main Body. A typical OmniBox build has two (2) parts for the base and three (3) for the main body.
The Unified base can be printed instead of the front and rear Base pieces.
Base
- Front Base
- Rear Base
- Unified Base
Main Body
- Crossbar
- Front Main Body
- Rear Main Body
The Base serves as a cover and mount for the power supply. It helps with wire routing and acts as a rigid base for the rest of the Core case.
"},{"location":"tour/#front-base","title":"Front Base","text":"This is the front of two halves. All versions come with front air vents and optional 40mm fan mounts.
The Front can be printed to fit a two types of power switches.
Front Base Files
Front - Rocker SwitchFront - Toggle Switch "},{"location":"tour/#rear-base","title":"Rear Base","text":"The back half mounts a fused IEC power plug and part of the Rear Panel.
This component is available with heat set inserts.
Rear Base Files
"},{"location":"tour/#unified-base","title":"Unified Base","text":"The base can be printed as a single piece instead halves on printers with a bed at least 300mm on one axis.
An extended version is available for the RSP-500 PSU. This file is 10mm taller than the normal base to account for the additional power supply height.
This component is available with heat set inserts.
Unified Base Files
"},{"location":"tour/#main-body","title":"Main Body","text":""},{"location":"tour/#main-body-crossbar","title":"Main Body Crossbar","text":"This is a crossbar that joins and covers the joint between the lids and front display.
This component is available with heat set inserts.
Crossbar Files
"},{"location":"tour/#front-main-body","title":"Front Main Body","text":"The front half of the Main Body mounts the display and front panel.
This component is available with heat set inserts.
Front Main Body Files
"},{"location":"tour/#rear-main-body","title":"Rear Main Body","text":"The rear half of the Main Body is the largest single piece of the case and operates with two levels. The lower level has CPU and lower bay trays. The upper level mounts the MCU.
This component is available with heat set inserts.
Rear Main Body Files
Quad 40mm FansNo Fan MountsThis versions of the rear main body requires either rear panel or lid-mounted fans.
"},{"location":"tour/#trays","title":"Trays","text":"Trays are used for mounting parts internally. There are four (4) types of trays.
Templates are available in both STEP and Fusion 360 formats to add support for new products.
Note
PSU trays are a new feature and do not yet have a template.
The four types of trays in red and blue.
Trays
- PSU Tray
- MCU Tray
- Lower Bay Trays
- CPU Tray
Power supply (PSU) trays slide up from underneath the case.
Large (tall) power supplies require the use of an extended Unified Base or a base extension.
PSU Tray Files
Supported PSUs
"},{"location":"tour/#mcu-tray","title":"MCU Tray","text":"MCU trays mount a microcontroller unit--your 3D printer board. These are
MCU
Supported MCUs
"},{"location":"tour/#lower-bay-trays","title":"Lower Bay Trays","text":"The lower bay is an area to mount parts like buck converters and MOSFETs. There are two dedicated lower bay trays locations and four more that can occupy an unused CPU tray bay.
These trays can be Short or Long. A Long tray covers the mount points of two Short trays and must be mounted from side-to-side in the case.
Lower Bay
Supported Lower Bay Components
"},{"location":"tour/#cpu-tray","title":"CPU Tray","text":"The CPU tray is an optional mount for a Raspberry Pi or other SBC. There are two bays for CPU trays; one is on each side of the case.
An unused bay is replaced by a Side Panel. A short lower bay tray can also be installed in an unused CPU bay.
CPU
Supported SBCs
"},{"location":"tour/#panels","title":"Panels","text":"The six types of panels, visible in grey.General Panels
- Display panel
- Lid
- Bottom panel
Connector Panels
- Front panel
- Rear panel
- Side panel
Panels cover the outside of OmniBox and mount of a range of options. Front, side, and rear panels are typically used for connectors, fans, and ventilation.
There is a blank STEP and Fusion 360 template for each panel category to allow users to create new panels.
The front panel serves as an air vent and location to put a MicroSD card reader extension. USB extensions and RGB LEDs are also common.
Front Panel
Panel Mounts
"},{"location":"tour/#side-panel","title":"Side Panel","text":"A side panel replaces a CPU tray and often mounts connectors or fans. A blank side panel may also be used.
Side Panel
Panel Mounts
"},{"location":"tour/#bottom-panel","title":"Bottom Panel","text":"The bottom panels act as a cover for the underside of the case. A fully enclosed option is available to keep dust out.
Bottom Panel
"},{"location":"tour/#display-panel","title":"Display Panel","text":"This area mounts LCD displays, from the basic 128x64 character display to Raspbery Pi TFTs.
Display
Supported Displays
"},{"location":"tour/#lids","title":"Lid(s)","text":"The lid is both a way into your case and a configurable panel. There are two types of lids: short and long lids. You can either print one (1) long lid or two (2) short lids.
Lid
"},{"location":"tour/#rear-panel","title":"Rear Panel","text":"The rear panel is used for ventilation, passing wiring out of your case, and optionally an additional fan. There are stock configurations available to suit common uses. A template is available for customization.
Rear panels with panel mounted connectors are an active area of work.
Rear Panel
Panel Mounts
"},{"location":"tour/#other-components","title":"Other Components","text":"- Fans
- Base Extensions
- Power Switches
- IEC C14 Power Sockets
Externally mounted fans use fan cages to cover the fan blades. There are a large number of fan sizes supported, each with a matching TPU fan gasket. The gaskets are optional and serve to reduce noise.
40mm fans may also be internally mounted in a number of ways.
Fans
Supported Fans
"},{"location":"tour/#base-extensions","title":"Base Extensions","text":"A base extension shim mounts between the base and the bottom panel and adds 10mm or 13mm of height. This is needed for the RSP-500 and other large PSUs.
This part is not needed if you print the extended Unified Base.
Extension Shim
"},{"location":"tour/#power-switch","title":"Power Switch","text":"OmniBox accepts either a 29mm x 10.5mm snap-in SPST rocker switch or a 12mm toggle switch for power on/off.
Larger power supplies will not fit with a toggle switch. Check the PSU support page for more.
A cover is available for rocker switches to prevent accidental power-off.
Rocker Switch Protector
Rocker SwitchToggle Switch "},{"location":"tour/#iec-c14-power-socket","title":"IEC C14 Power Socket","text":"Power is provided through a standard fused IEC C14 power socket.
"},{"location":"assembly/","title":"Getting Started","text":""},{"location":"assembly/#welcome","title":"Welcome","text":"Welcome to the Assembly Guide for OmniBox. This page covers:
- An overview of what to expect;
- Accounting for differences in configuration from this guide; and
- Best practices during assembly.
TODO
This section has not yet been updated for v0.9.11.
"},{"location":"assembly/base/","title":"Base and PSU","text":"Assembly of the case starts with the Base and PSU Tray.
"},{"location":"assembly/base/#psu-tray","title":"PSU Tray","text":"Overview"},{"location":"assembly/base/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M4 x 6mm machine screws 4 No longer than 8mm. Mean Well LRS-350-24 1 PSU Tray 1 Printed, 2 files. Parts Qty Note M4 x 6mm machine screws 4-8 No longer than 8mm. Compatible power supply 1 PSU Tray 1 Printed, 2 files."},{"location":"assembly/base/#directions","title":"Directions","text":"1. Set the power supply with the terminals are facing downwards and away from you. 2. Place the right PSU tray mount against the right side of the power supply. The printed 'R' should face upwards. 3. Use two (2) M4 screws to attach the tray mount. 4. Set the left tray mount against the opposite side of the power supply. The 'L' should face upwards. 5. Secure using two (2) M4 screws."},{"location":"assembly/base/#reference","title":"Reference","text":""},{"location":"assembly/base/#prepare-the-base","title":"Prepare the Base","text":"Overview"},{"location":"assembly/base/#materials_1","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 8mm machine screws 2 M3 x 16mm machine screws 4 Four per fan. 40mm x 10mm axial fan 1 Optional, up to three. SPST rocker switch 1 IEC C14 socket with fuse holder 1 Fuse, Glass, 5x20mm, Fast Blow 1Base - Front.stl 1 Printed Base - Rear - HSI.stl 1 Printed Parts Qty Note M3 x 8mm machine screws 2 SPST toggle switch 1 IEC C14 socket with fuse holder 1 Fuse, Glass, 5x20mm, Fast Blow 1 Base - Front 1 Printed Base - Rear 1 Printed Note: Unified Base
The unified base replaces both the front and rear bases and requires no additional parts.
"},{"location":"assembly/base/#directions_1","title":"Directions","text":"1. Slide the toggle switch into the open slot on the front base. The flaps on the side compress and snap the switch in place once inserted.Note
The front vents mount up to three fans. In this example we will use one (1).
Repeat the next two (2) steps for any additional fans.
Caution
The fan(s) will press directly against the floor of the main body once it is installed. If the wiring passes upwards through a strain relief notch in the fan case, the wires will be trapped between the fan and case body. Either turn the fan 90 degrees or the remove the wiring from the strain relief notch.
2. Place a 40mm fan against the front vent. Most users will need this as an exhaust.
Note: Airflow Direction
The direction of airflow for most fans is towards base of the motor. Most fans have a sticker on this side of the motor. In this case, the sticker should face towards the vent.
3. Attach the fan with four (4) M3 x 16mm screws.
Important: Screw Lengths
The holes for internally mounted fans are 6mm deep. Screws should never be longer than 16mm for a 40mm x 10mm fan.
If your fan has a counterbore for the screw head, use a 10mm or 12mm screw instead.
Note
The next two steps are necessary if:
- The IEC socket does not have a fuse; or
- The IEC socket has a fuse of the wrong capacity for your configuration.
This guide can help get you started. Consult with a professional if uncertain what capacity fuse you should use.
4. Slide out the fuse holder cover.
5. Insert a fuse into the fuse holder. If necessary, remove the fuse that came with the socket.
6. Replace the cover and slide the power switch socket into the rear of the base.
7. Secure with two (2) M3 x 8mm screws."},{"location":"assembly/base/#reference_1","title":"Reference","text":""},{"location":"assembly/base/#combine-base-and-psu","title":"Combine Base and PSU","text":"Overview"},{"location":"assembly/base/#materials_2","title":"Materials","text":"Parts Qty Note M3 x 12mm machine screws 8"},{"location":"assembly/base/#directions_2","title":"Directions","text":"1. Turn the PSU tray assembly so that the PSU terminals are oriented downards and away from you. 2. Place the base pieces around the PSU tray. The edges should fit together. Note that the power supply terminals are facing downwards. 3. Use eight (8) 12mm M3 screws to attach the base to the PSU tray."},{"location":"assembly/base/#reference_2","title":"Reference","text":""},{"location":"assembly/bottom_lid/","title":"Bottom Panel & Lid","text":"
This is the last section of the build. Here we close up the bottom and top of the case.
"},{"location":"assembly/bottom_lid/#bottom-panel","title":"Bottom Panel","text":"Overview"},{"location":"assembly/bottom_lid/#materials","title":"Materials","text":"Note that builds requiring a base extension will need longer screws.
As IllustratedStock and HSIFull HSIWith Base Extension (All Builds) Parts Qty Note M3 x 8mm machine screws 8 Closed Bottom Panel 1 Printed, two (2) files Parts Qty Note M3 x 8mm machine screws 8 May substitute 10mm or 12mm. Bottom Panel 1 Printed, two (2) files Parts Qty Note M3 x 6mm machine screws 8 Bottom Panel 1 Printed, two (2) files Parts Qty Note M3 x 16mm machine screws 8 Bottom Panel 1 Printed, two (2) files Base Extension 1 Printed, two (2) files"},{"location":"assembly/bottom_lid/#directions","title":"Directions","text":"1. Line up the front bottom panel with the front base. 2. Use four (4) M3 x 8mm screws to attach the panel. 3. Use the same procedure for the rear bottom panel with four (4) more M3 x 8mm screws."},{"location":"assembly/bottom_lid/#reference","title":"Reference","text":""},{"location":"assembly/bottom_lid/#lids","title":"Lid(s)","text":"The example below uses a single, long lid. The procedure for installing two short lids is the same and requires no additional fasteners.
Overview"},{"location":"assembly/bottom_lid/#materials_1","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 8 May substitute longer screws. M3 x 8mm machine screws 2 Long Carry Handle Lid 1 Printed Carry Handle for Lids 1 Printed Parts Qty Note M3 x 8mm machine screws 8 May substitute 10mm or 12mm. Lid 1-2 Printed Parts Qty Note M3 x 6mm machine screws 8 May substitute longer screws. Lid 1-2 Printed
Note
The stock carry handle is illustrated, but there is also a version of the handle for heat set inserts.
"},{"location":"assembly/bottom_lid/#directions_1","title":"Directions","text":"1. Place the handle over the screw holes in the center of the lid. 2. Flip the lid over and fasten the handle in place with two (2) M3 x 8mm screws. 3. Place the assembled lid on top of the case. The lid is reversible. 4. Use eight (8) M3 x 6mm screws to attach the lid."},{"location":"assembly/bottom_lid/#reference_1","title":"Reference","text":""},{"location":"assembly/bottom_lid/#thats-it","title":"That's it!","text":"You completed an OmniBox! Congratulations!
"},{"location":"assembly/core/","title":"Core Assembly","text":"Next we'll add the front and rear halves of the Main Body to the Base.
"},{"location":"assembly/core/#attach-the-main-body","title":"Attach the Main Body","text":"Overview"},{"location":"assembly/core/#materials","title":"Materials","text":"As IllustratedStock and HSIFull HSI Parts Qty Note #6 x 3/4\" sharp point screws 8Main Body - Front - HSI.stl 1 Printed Main Body - Rear - HSI - No Fans.stl 1 Printed Parts Qty Note #6 x 3/4\" sharp point screws 8 Main Body - Front 1 Printed Main Body - Rear 1 Printed Parts Qty Note M3 x 6mm machine screws 8 Main Body - Front - Full HSI.stl 1 Printed Main Body - Rear - Full HSI.stl 1 Printed"},{"location":"assembly/core/#directions","title":"Directions","text":"1. Set the front and rear Main Bodies over the base and the align the edges. 2. Begin inserting #6 screws to the base, tightening about halfway. Before fastening each screw, check that the main body and base are still lined up. 3. Continue fastening screws halfway until all eight (8) are partially inserted. Note: Alignment
If inserting the screws becomes difficult, back out and check:
- That both halves of the main body are still correctly aligned; and
- That the inserted screws are straight and not canted to the side.
4. Check for any alignment problems between the Base and Main Body. When satisfied, finish tightening the screws down completely."},{"location":"assembly/core/#reference","title":"Reference","text":""},{"location":"assembly/core/#join-the-main-body","title":"Join the Main Body","text":"Overview"},{"location":"assembly/core/#materials_1","title":"Materials","text":"Stock and HSIFull HSI Parts Qty Note M3 x 8mm machine screws 6 Can use 10mm screws instead. Parts Qty Note M3 x 6mm machine screws 6"},{"location":"assembly/core/#directions_1","title":"Directions","text":"1. Insert an M3 x 8mm screw in the top hole on one side of the rear Main Body. Fasten it to the mating hole on the front Main Body. 2. Repeat with the top hole on the other side of the Main Body, again fastening from back to front. 3. Use two (2) more M3 screws to fill in the remaining screw holes on one side. 4. Repeat with the final two (2) screw holes on the opposite side."},{"location":"assembly/core/#reference_1","title":"Reference","text":""},{"location":"assembly/core/#attach-the-crossbar","title":"Attach the Crossbar","text":"Overview"},{"location":"assembly/core/#materials_2","title":"Materials","text":"Parts Qty Note M3 x 20mm machine screws 2 Main Body - Crossbar 1 Printed"},{"location":"assembly/core/#directions_2","title":"Directions","text":"1. Hold the crossbar between the screw holes at the top of the front main body. Note that the lip should face forward. 2. Fasten the crossbar in place with two (2) M3 x 20mm screws. Tightness can be adjusted to help square the sides of the case body."},{"location":"assembly/core/#reference_2","title":"Reference","text":""},{"location":"assembly/cpu/","title":"CPU","text":"
This section is optional. If you are not using a SoC CPU like a Raspberry Pi, use a fourth side panel in the next assembly section.
"},{"location":"assembly/cpu/#overview","title":"Overview","text":""},{"location":"assembly/cpu/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 4 M3 x 8mm machine screws 4 May substitute 10mm or 12mm. M3 x 15mm machine screws 4 May substitute 16mm. Raspberry Pi 4B 1 40mm x 10mm Axial Fan 1 Assembled SPI cable 1 Universal Raspberry Pi CPU Tray 1 Printed Parts Qty Note M3 x 8mm machine screws 4 May substitute 10mm or 12mm. M3 x 6mm machine screws N/A Most SoC CPUs use four (4). Compatible SoC CPU 1 CPU Tray 1 PrintedWarning: M3 x 16mm screws
If using M3 x 16mm screws for the 40mm fan, do not overtighten or you may deform the outer panel surface.
Note: SPI cable
The illustrated CPU tray has a cutout for a 2 Row, 6-position Molex Micro Fit 3 connector. This cutout can be wired to connect devices to the SoC CPU, such as an accelerometer.
Assembling and wiring this cable is beyond the scope of this guide, but the cable can be made from DuPont-terminated breadboard wires.
"},{"location":"assembly/cpu/#directions","title":"Directions","text":"1. Orient the 40mm fan and fasten with four (4) M3 x 15mm screws. If substituting with 16mm screws *do not overtighten. 2. Place the Raspberry Pi on the tray. The headers should face away from the fan. 3. Fasten with four (4) M3 x 6mm screws. The holes are for M2.5 screws but will bore out easily for M3 screws. 4. (Not pictured) Connect the SPI cable to the Raspberry Pi GPIO headers. Double-check that the cable pins mate to correct the headers. 5. Snap the Micro Fit 3 connector into the CPU tray panel. 6. Slide the CPU into the case. In this example, we use the front right CPU bay. 7. Secure with four (4) M3 x 8mm screws."},{"location":"assembly/cpu/#reference","title":"Reference","text":""},{"location":"assembly/display/","title":"Display Panel","text":"This section covers assembling a generic 12864 display panel, like the kind commonly found on older Creality Ender-series printers.
Common aftermarket TFT displays have an extra step of mounting the display to a cover. The cover then attaches to the panel. Other than this, the installation process remains the same.
"},{"location":"assembly/display/#overview","title":"Overview","text":""},{"location":"assembly/display/#materials","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 4 M3 x 8mm machine screws 4 May substitute 10mm or 12mm. Generic 12864 LCD 1 Comes with many Creality printers.Display Panel - Generic 12864.stl 1 Printed Display Knob 1 Printed, Optional Parts Qty Note M3 x 10mm machine screws 4 May also use 12mm. Compatible LCD display 1 Display Panel 1 Printed Display Knob 1 Printed, Optional Parts Qty Note M3 x 8mm machine screws 4 Compatible LCD display 1 Display Panel 1 Printed Display Knob 1 Printed, Optional Note
Only the fasteners required to mount the printed panel to the case are listed in the Stock and HSI materials.
"},{"location":"assembly/display/#directions","title":"Directions","text":"1. Remove the display knob. It should come off with light force. 2. Fit the LCD into the display panel. 3. If you have a printed knob, push it back in place of the original. Otherwise, push the original knob back. 4. Attach the LCD to the panel with four (4) M4 x 6mm screws. 5. Set the assembly into the display mount on the front main body. 6. Attach the display with four (4) M4 x 8mm screws."},{"location":"assembly/display/#reference","title":"Reference","text":""},{"location":"assembly/front/","title":"Front Panel","text":""},{"location":"assembly/front/#overview","title":"Overview","text":""},{"location":"assembly/front/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 4 M3 x 10mm machine screws 2 May substitute 12mm.Front Panel - MicroSD, Slats.stl 1 Printed LANMU MicroSD Holder Body.stl 1 Printed LANMU MicroSD Holder Cap.stl 1 Printed ELECTOP MicroSD Reader Extension 1 See note. Note: MicroSD Reader Extension
Each MCU tray entry notes if the part requires a short (6\" LANMU) or long (18\" ELECTOP) reader extension. The illustrated SKR 2 requires a long extension.
The assembly process for both lengths of SD reader extension is the same.
Parts Qty Note M3 x 10mm machine screws 2 May substitute 12mm. Front Panel 1 PrintedNote: LED Backing Panel
If you are using the LED backer, substitute M3 x 12mm for the two (2) M3 x 10mm screws.
"},{"location":"assembly/front/#directions","title":"Directions","text":"1. Carefully pry open the outer plastic shell around the MicroSD card reader extension. Discard the shell. 2. (Not pictured) Place the MicroSD extension PCB in the holder body. The ribbon cable should be flush with the lip on the back of the holder. 3. Place the holder cap on top of the extension and holder body. 4. Use two M3 x 6mm screws to fasten the cap in place. 5. Slot the assembly into the front panel and secure with two (2) M3 x 6mm screws. Vertical orientation does not matter. 6. Push the front panel into place on the case body. Slip the SD card extension cable through first. 7. Attach the panel with two (2) M3 x 10mm screws."},{"location":"assembly/front/#reference","title":"Reference","text":""},{"location":"assembly/hsi_locations/","title":"Insert Locations","text":"This page contains a map of where heat set inserts should be installed for both a regular and Full HSI build.
"},{"location":"assembly/hsi_locations/#front-main-body","title":"Front Main Body","text":""},{"location":"assembly/hsi_locations/#standard","title":"Standard","text":"This part requires eight (8) total inserts.
Four (4) inserts
Four (4) inserts"},{"location":"assembly/hsi_locations/#full-hsi","title":"Full HSI","text":"
Full HSI adds ten (10) additional inserts.
Two (2) inserts
Eight (8) inserts"},{"location":"assembly/hsi_locations/#rear-main-body","title":"Rear Main Body","text":""},{"location":"assembly/hsi_locations/#standard_1","title":"Standard","text":"
This part requires fourteen (14) inserts.
Eight (8) inserts
Six (6) inserts"},{"location":"assembly/hsi_locations/#full-hsi_1","title":"Full HSI","text":"
Full HSI adds sixteen (16) additional inserts.
Sixteen (16) inserts"},{"location":"assembly/hsi_locations/#front-base","title":"Front Base","text":""},{"location":"assembly/hsi_locations/#standard_2","title":"Standard","text":"
This part does not have inserts in a standard HSI build.
"},{"location":"assembly/hsi_locations/#full-hsi_2","title":"Full HSI","text":"Full HSI uses eight (8) for this part.
Eight (8) inserts"},{"location":"assembly/hsi_locations/#rear-base","title":"Rear Base","text":""},{"location":"assembly/hsi_locations/#standard_3","title":"Standard","text":"
The standard HSI build uses two (2) inserts.
Two (2) inserts"},{"location":"assembly/hsi_locations/#full-hsi_3","title":"Full HSI","text":"
Full HSI adds ten (10) additional inserts.
Two (2) inserts
Eight (8) inserts"},{"location":"assembly/hsi_steps/","title":"Insertion Steps","text":"
The front of the Main Body has eight (8) inserts, with four (4) canted at an angle for the display. These canted inserts are unique for the case, so we'll use the front as an example on how to install inserts.
These instructions are for the standard HSI Front Main Body (not the Full HSI version).
Note
The display screen is at a 50 degree angle, not 45. The practice block has six holes at this angle for practice purposes.
It is important that the inserts are flush with the display surface.
"},{"location":"assembly/hsi_steps/#materials","title":"Materials","text":"Parts Qty Note Heat set inserts, M3, 4.5x5.7mm 8Main Body - Front - HSI.stl 1 Printed"},{"location":"assembly/hsi_steps/#directions","title":"Directions","text":"1. Using four (4) inserts, place one in each of the two (2) lid holes and two (2) MCU tray holes. 2. Heat and set the inserts. 3. Turn the front body so that the four display panel mounting holes face you. Place inserts in each hole. 4. Carefully set the inserts, checking that the inserts finish flush with the surrounding plastic."},{"location":"assembly/hsi_steps/#reference","title":"Reference","text":""},{"location":"assembly/hsi_tips/","title":"HSI Introduction & Tips","text":""},{"location":"assembly/hsi_tips/#time","title":"Time","text":"Installation time varies by experience; typically this is between 15 to 45 minutes. The \"Full HSI\" build has significantly more inserts than the regular HSI build and requires additional time.
"},{"location":"assembly/hsi_tips/#additional-materials","title":"Additional Materials","text":"- Soldering iron
- M3 heat set insert tip for soldering irons
- Fine tweezers
If you are using inserts for the first time, print at least one practice block. Experience with inserts saves time and lowers the chances of printed part damage.
These blocks have holes in two orientations: flat and set at a 50 degree angle. The holes are identical in shape to those used in the case. Practice putting inserts in both types of holes until comfortable with the procedure.
"},{"location":"assembly/hsi_tips/#procedure","title":"Procedure","text":""},{"location":"assembly/hsi_tips/#setup","title":"Setup","text":"- Install the M3 insert tip on your soldering iron.
- Pre-heat the iron to a low temperature (200C is fine for both PLA and PETG).
- Allow enough time for your iron to heat up. A 40W iron may need two minutes.
Note
These inserts have a rounded lip on one side. This end \"sits\" in the hole and maintains alignment with the hole during heating and insertion.
Tip
The insert holes have a slight inward slope. Resistance will gradually increase as the insert slides in place. Resistance greatly increases when the insert deviates from the hole.
Caution
Installing an insert leaves both the insert and surrounding plastic hot for several minutes.
Avoid touching areas of the case around an insert until it has cooled.
- Pre-set an insert into the hole using your fingers or needle-nosed pliers. It drop in until it reaches the first set of knurles (or pop in place with some pressure).
- Place the tip of the soldering iron on the insert. Do not apply pressure yet.
- As the insert heats, it will soften the plastic around it. Apply gentle pressure with the iron.
- Let the shape of the hole guide the insert.
- Once the insert is flush or slightly below the surface, remove the iron.
- Check if the insert is off-center by looking for gaps around the edges. The plastic should be evenly melted around the insert.
- If the insert needs adjustment, gently use fine tweezers or an M3 x 20mm screw to straighten it (while still hot). See below if the insert cools.
Sometimes an off-center insert is not discovered until later. The most common symptom is a squealing noise when inserting screws. If this happens, back out the screw and try again; the screw may be threading at an angle. If this does not correct the issue, stop assembly to fix the insert.
Note
These instructions are still being fine-tuned.
- Preheat the soldering iron to a low temperature.
- Set the iron's tip on the insert, but do not press down.
- Allow three (3) to five (5) seconds for the insert to heat.
- Take an M3 x 20mm or longer machine screw and thread one (1) or two (2) turns into the insert.
- Use the screw to straighten the insert before the plastic cools around it.
Lower bay trays can be mounted in one of six (6) locations for short trays and one of three (3) locations for long trays. This flexibility is useful when planning ahead (e.g., a buck converter can be located near the device it powers for shorter wiring).
"},{"location":"assembly/lower_bay/#long-trays","title":"Long Trays","text":"Long trays can be mounted in the front, middle, or back of the lower bay. They can only be mounted with the long side oriented sideways.
"},{"location":"assembly/lower_bay/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 8 Wago 221-413 Lever Nuts 4Lower Bay Tray - Wago Nuts - 8x3P.stl 1 Printed Parts Qty Note M3 x 6mm machine screws 4 Compatible hardware 1 Long Lower Bay Tray 1 Printed Only screws for mounting the tray are specified in the generic materials list.
"},{"location":"assembly/lower_bay/#directions","title":"Directions","text":"1. Snap the Wago connectors in place. We leave half of the tray unoccupied for future expansion. 2. Determine the best location for the tray. Here, it is set in the center to shorten wiring. 3. Secure with four (4) M4 x 6mm screws."},{"location":"assembly/lower_bay/#short-trays","title":"Short Trays","text":"Short trays can be mounted in any one of six (6) locations in the lower bay. Short trays do not always fit next to an occupied CPU bay.
"},{"location":"assembly/lower_bay/#materials_1","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 6 LM2596 Buck Converter 1Lower Bay Tray - Generic LM2596 - Short Single Tray.stl 1 Printed Parts Qty Note M3 x 6mm machine screws 4 Compatible hardware 1 Short Lower Bay Tray 1 Printed Only screws for mounting the tray are specified in the generic materials list.
"},{"location":"assembly/lower_bay/#directions_1","title":"Directions","text":"1. Set the buck converter on the tray's standoffs and secure with four (4) M4 x 6mm screws. It is a good idea to ensure the converter's voltage level is set at this point. 2. Determine the best location for the tray in the lower bay. In this case, the tray will not fit next to the Raspberry Pi, so it is placed in the back. 3. Secure the tray to the case with four (4) M4 x 6mm screws."},{"location":"assembly/lower_bay/#reference","title":"Reference","text":""},{"location":"assembly/mcu/","title":"MCU Tray","text":""},{"location":"assembly/mcu/#mcu-installation","title":"MCU Installation","text":""},{"location":"assembly/mcu/#overview","title":"Overview","text":""},{"location":"assembly/mcu/#materials","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 8 BIGTREETECH SKR 2 1 MCU Tray - BTT SKR 1.3-2 1 Printed Parts Qty Note M3 x 6mm machine screws 4 Some boards may use 5 or more. M3 x 8mm machine screws 4 Compatible MCU 1 MCU Tray 1 Printed Parts Qty Note M3 x 6mm machine screws 8 Some boards may use 5 or more. Compatible MCU 1 MCU Tray 1 Printed"},{"location":"assembly/mcu/#directions","title":"Directions","text":"1. Place your MCU on the tray and align the mounting holes.Important
Larger trays (e.g. BIGTREETECH Octopus series or the Manta M8P) will only fit in the case if the board is oriented one way, as the trays are not symmetrical. Check which direction fits in the case before securing the MCU to the tray.
2. Use four (4) 6mm screws to secure the MCU.
3. Set the MCU tray on the pillars in the case. The board's power connectors should orient to the back of the case or to the side.
4. Fasten the tray with four (4) M3 x 6mm screws."},{"location":"assembly/mcu/#reference","title":"Reference","text":""},{"location":"assembly/psu_wiring/","title":"PSU Wiring","text":"
At this point, it is a good idea to wire the power supply, power switch, and power socket. The large hole in the right PSU tray mount allows wiring to pass through from the power switch. There are zip tie anchors available in the sides to secure the power switch wiring.
"},{"location":"assembly/psu_wiring/#considerations","title":"Considerations","text":""},{"location":"assembly/psu_wiring/#cautions","title":"Cautions","text":"Important
For this example, we will use red wires for the power switch and use them for the live leg from the power socket to switch to PSU (normally labeled 'L' on the PSU).
It is strongly recommended that the switch operate on the live wire instead of the neutral.
Warning
Be careful of polarity and always check your work!
"},{"location":"assembly/psu_wiring/#limitations","title":"Limitations","text":"Warning
- This guide is not meant to be a complete manual for wiring.
- I am not liable for any damage or injury that may result.
- The Overview video in this section is limited to connecting the prepared wiring.
- This section of the guide does not cover all possible scenarios.
- IEC sockets typically ship with short wires with pre-crimped connectors.
- If yours is not pre-wired, you will need two additional wires for the other poles of the IEC socket.
- Preparing and installing these wires is beyond the scope of this guide.
In this section you will need to crimp closed barrel connectors. If you have never performed crimping before, it is strongly recommended that you practice before proceeding.
Cablecraft has an excellent, in-depth guide to crimping common terminal types.
"},{"location":"assembly/psu_wiring/#wiring-the-psu","title":"Wiring the PSU","text":""},{"location":"assembly/psu_wiring/#overview","title":"Overview","text":""},{"location":"assembly/psu_wiring/#materials","title":"Materials","text":"Parts Qty Note 16awg/1.5mm2 red stranded hookup wire 0.7m 14 or 16 gauge (1.5mm2 - 2.5mm2) Fork connectors, 14-16 awg, female insulated 1 Spade connectors, 14-16 awg, insulated 3"},{"location":"assembly/psu_wiring/#preparing-materials","title":"Preparing Materials","text":"Note
When crimping closed barrel connectors, the bare wire should extend no more than 1mm from the end of the crimp.
- Cut one (1) length of hookup wire approximately 30cm (12\") long and strip the ends.
- Crimp a spade terminal on each end and set the wire aside.
- Cut one (1) length of wire approximately 37cm (15\") long and strip the ends.
- Crimp a spade terminal on one end.
- Crimp a fork connector on the other end.
The prepared wires should look roughly like the above."},{"location":"assembly/psu_wiring/#directions","title":"Directions","text":"1. Remove the red wire from the IEC socket's live (L) terminal. Note that this view is from the bottom up; the live (L) wire is the red wire on bottom. 2. Attach one end of the wire with two spade connectors to the socket's live (L) terminal. 3. Run the wire through the PSU tray's wiring hole and attach it to either terminal on the power switch. 4. Attach the spade connector on the remaining wire to the remaining free switch terminal. 5. Run the wire back through the PSU tray's wiring hole and secure the fork terminal to the PSU's live (L) AC terminal. 6. Connect the remaining IEC socket connectors to the PSU: neutral and protective earth/ground (often yellow or green)."},{"location":"assembly/psu_wiring/#reference","title":"Reference","text":""},{"location":"assembly/rear/","title":"Rear Panel and Wiring","text":"
We are close to completion, so the rear panel and MCU wiring are next.
"},{"location":"assembly/rear/#rear-panel","title":"Rear Panel","text":""},{"location":"assembly/rear/#overview","title":"Overview","text":""},{"location":"assembly/rear/#materials","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 8 M3 x 25mm machine screws 4 60mm x 15mm axial fan 1Generic No USB with Fan.stl 1 Printed 6015 Fan Cage.stl 1 Printed 6015 Fan Gasket.stl 1 Printed TPU, optional Parts Qty Note M3 x 8mm machine screws 8 May substitute 10mm or 12mm. Rear Panel 1 Printed Parts Qty Note M3 x 6mm machine screws 8 Rear Panel 1 Printed"},{"location":"assembly/rear/#directions","title":"Directions","text":"1. Put the fan, cage, and gasket together as shown. 1. Push the fan's wiring through the cutout at the bottom. Fasten the fan cage assembly in place with four (4) M3 x 30mm screws. 1. Fit the rear panel against the back of the case. 1. Fasten in place using eight (8) M3 screws."},{"location":"assembly/rear/#reference","title":"Reference","text":""},{"location":"assembly/rear/#mcu-wiring","title":"MCU Wiring","text":"Before we install the display and lid, complete all remaining wiring for the MCU and any other components. The possible combinations of MCUs and printers (and their types of wiring harnesses!) are too large to fit this guide. Below are tips and links to other resources. This section will grow with time.
"},{"location":"assembly/rear/#safety","title":"Safety","text":"- Double-check your work.
- Be prepared to cut power instantly during both power on and testing the printer.
- Consider safing your printer against ground faults!
- Grounding to earth protects in case of a number of issues, e.g., a short in the bed touching the frame.
- This is very important for AC-powered beds.
- Connect your frame to the AC ground (usually a yellow or green wire, not the black neutral wire).
- Do not assume your power supply case is safely earthed\u2014test with a multimeter.
- TH3D has a page with helpful videos on the subject.
- Double-check your work as you go.
- Label connectors with where they attach to the MCU board for easy removal and reconnection later (e.g.,
TBfor the bed thermistor header). - Check connector pins:
- Many connector pins are not designed for frequent removal: wires may pull free from the pin or pin from the connector.
- Pin can become damaged or come loose during removal.
- JST XH connectors are particularly prone to pin issues (usually used for fans, thermistors, and endstops).
- Zip tie anchors:
- The zip tie anchors in the sides of the case are helpful for securing longer wires.
- If you are crimping your own wires, extra length can be used to keep the wiring clean.
Before Continuing
It is a good idea to perform initial power on tests now.
"},{"location":"assembly/side/","title":"Side Panel(s)","text":"Each case has four (4) locations for a side panel. If you have an SoC CPU, one side panel is already occupied by the CPU tray. In this case, you will instead need three (3) side panels.
"},{"location":"assembly/side/#overview","title":"Overview","text":""},{"location":"assembly/side/#materials","title":"Materials","text":"These lists assume three (3) side panels are needed.
As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 6 M3 x 8mm machine screws 12 May substitute 10mm or 12mm. M3 x 15mm machine screws 4 May substitute 16mm. 40mm x 10mm Axial Fan 1 RJ-45 Extension (panel mount) 1 USB Extension (panel mount) 2Side Panel - Internal 40mm Fan - OmniBox Logo.stl 1 Printed Side Panel - RJ-45 & Dual USB.stl 1 Printed Side Panel - Blank.stl 1 Printed Parts Qty Note M3 x 8mm machine screws 12 May substitute 10mm or 12mm. Side Panel 3 Printed"},{"location":"assembly/side/#directions","title":"Directions","text":"1. Use four (4) 15mm screws to attach the 40mm fan to the Internal 40mm Fan side panel. Here the fan is used as an intake. 2. Place the assembled side panel against the case body. Note that the top and bottom screw holes are not symmetrical. This fan will act as a second intake in the front, opposite the one on the Raspberry Pi. 3. Fasten with four (4) M3 screws at least 8mm long. 4. The next side panel is for RJ-45 and USB panel mounted extensions. First determine the correct orientation for the RJ-45 socket. 5. Secure with two 6mm screws. 6. The USB connectors do not have a fixed orientation. The USB connector will insert slightly into the panel mount. Secure the extensions with 6mm screws. 7. Slide the panel in place and fasten with four (4) 8mm screws. 8. Attach the remaining (blank) panel with the remaining four (4) 8mm screws."},{"location":"assembly/side/#reference","title":"Reference","text":""},{"location":"history/","title":"0.9.11 Release","text":"The current beta release is 0.9.11. No release date has been set yet.
"},{"location":"history/#new-features","title":"New Features","text":""},{"location":"history/#major-new-features","title":"Major New Features","text":"- Available with built-in supports;
- Taller side panels, now 58mm;
- Reduced visibility of seams;
- Base available in two heights & a shorter standard base height;
- Many new base variations & combinations;
- All versions of the Base and Main Body are available as Front/Rear or Unified; and
- Built-in mounts for 3-position Wago 221 connectors.
- Smoother external lines;
- Better printability with basic PLA;
- Increased functional room for PSU by inverting IEC socket;
- Raised MCU tray mounting height; and
- Better rocker switch snap-in.
- Issue #118: Move PSU Tray mounts forward
- Issue #55: E5+ Monolithic main body
- Issue #117: IEC socket can be inverted in the base
- Documentation site
- Nothing yet.
- Repository
- Migrating to versioned panel and tray subfolders.
An OmniBox with external 50mm fan and keystone jack extensions.
Front view of a completed OmniBox with power switch cover and rear-mounted 60mm fan.
The new Mean Well bottom panel allows the PSU to exhaust directly out of the case.
Everything but the panels, ready to assemble the Core case.Photo courtesy matrixsenpai.
A freshly-printed PETG Rear Main Body.Photo courtesy matrixsenpai.
"},{"location":"history/v0.9.10/","title":"0.9.10 Release","text":"The current stable release is 0.9.10, released on 2023-07-31.
"},{"location":"history/v0.9.10/#new-features","title":"New Features","text":""},{"location":"history/v0.9.10/#major-new-features","title":"Major New Features","text":"- Added two (2) new CPU bays for a total of four (4).
- Heat set insert support changed to M3 x 5mm (OD) x 4mm (L) (Voron-style).
- Front base support for toggle switches.
- Rear main body with two (2) external fans replaced by a four (4) interal mounts.
- \"Full HSI\" case option with most fasteners mating with an insert.
- Improved: Crossbar version added with HSI support, better zip tie anchors.
- Improved: Long lower bay trays now mount sideways, one additional tray available.
- Improved: New bottom panel template and panel options.
- Added: Additional zip tie anchors, particularly to the front main body.
- Improved: CPU tray guides take up significantly less room.
- New: Support for 12mm and 12.5mm toggle switches.
- New: MCU trays with mounts for dual MCUs.
- New: Slide-out storage for the CPU bay.
- Improved: Rear panel template now provides support for the lid.
- Improved: Display panel template now fits betters and prints with less material.
- Issue #91: Display template is faulty
- Issue #81: Lower bay tray standoffs need a fillet
- Issue #59: Micro Fit 3 pinouts for rear panels are missing
- Issue #94: Add a power switch cover to prevent accidental bumping
- Issue #114: Lower bay standoffs should be tapered
- Issue #111: Videos should not auto-download
- Issue #102: Template should have a version code
- Issue #62: Panel mounted connectors template is out of date
- Documentation site
- Added contribution information.
- Cleaned up wording on introductory pages.
- All fixed BOM parts have example links.
- Added a simple upgrading guide and templates page.
- Simplified HSI assembly section.
- Repository
- Some file names have additional qualifiers where multiple variations now exist, e.g. \"stock\" vs. \"HSI\".
- Fixed a number of stable files that were never copied or updated from
unstable.
An OmniBox with external 50mm fan and keystone jack extensions.
Front view of a completed OmniBox with power switch cover and rear-mounted 60mm fan.
The new Mean Well bottom panel allows the PSU to exhaust directly out of the case.
Everything but the panels, ready to assemble the Core case.Photo courtesy matrixsenpai.
A freshly-printed PETG Rear Main Body.Photo courtesy matrixsenpai.
"},{"location":"history/v0.9.5/","title":"0.9.5 Release","text":"This is a past release of OmniBox, originally released on 2022-06-03.
"},{"location":"history/v0.9.5/#fixes","title":"Fixes","text":"- Issue #1 is fixed and the lids should be reversible now.
- The rear body fan mounts are rotated 45 degrees for an easier print.
- Print time and material should be slightly reduced on the rear body due to minor changes to the tray holder.
- All display mounts now have source files.
- SKR Mini E3 boards have preliminary support (included for the sake of completeness, but untested).
- No issues are currently outstanding as of this release.
This is a past release of OmniBox. It was released on July 22, 2022.
"},{"location":"history/v0.9.7/#fixes","title":"Fixes","text":"- IEC power socket is now built into the rear base (it doesn't have to be disconnected when removing the rear panel).
- Display screen mounting hole locations are fixed.
- TPU gaskets are much improved.
- Lid screw locations are now symmetric.
- Addition of rear main body with no fan holes (for use when using a larger fan on the rear panel or lid).
- Version of front main body with 60mm fan intake instead of vent holes.
- Request Fill SKR E3 Mini and Turbo support
- Request Fill 6 combinations of \"Generic\" rear panels with wire passthru holes instead of panel mounts
- Request Fill New fan cages for 6 fan sizes with more to come.
- New template Fusion file for making panel mounted rear panels
- Molex Micro Fit 3 connector profiles
- USB A, RJ-45, and other new panel mount extension profiles
- Mounts for another variety of buck converter (compact footprint with LED, commonly sold by HiLetgo on Amazon)
- Blank CPU port cover for Marlin and RRF users (i.e., no Raspberry Pi)
- File structure improved; most parts have a folder containing
STL,STEP, and Fusion file (when available). - Fan Cages now have a top-level folder
- Supported features documentation broken out by category and updated
- Guide to rear panels simplified
Version 0.9.8.1 was released on 2022-09-15.
"},{"location":"history/v0.9.8.1/#core","title":"Core","text":"- Print time and material usage is slightly reduced for the front and rear base components.
- Lid for filament spools added.
- An adaptation of my Tighter T.U.S.H. spool holder (a remix of the original T.U.S.H.).
- It mounts on a lid that integrates the spool holder guide.
- The guide makes the spool holder adjustable to spool width (up to about 120mm).
- Lid for dryboxes added.
- Fitted for Rubbermaid 21 cup container used as a 1kg spool drybox.
- These containers are about $10 each at Ace Hardware. They are more expensive on Amazon.
- There are often clones of these on Amazon that are similarly priced (about $8-10 ea).
- May have lids for other containers in the near future as a user contribution.
- Raspberry Pi CPU trays have a version with a 6-pin Micro Fit 3 panel mount cutout.
- Allow using an ADXL345 accelerometer via SPI.
- Cutout is on the tray to give shortest wiring run possible.
These parts still need to be tested for fit and other issues.
Hardware Mount Location(s) Notes Mean Well RSP-500 power supply Main body For the Ender 5 Plus 92mm fans Rear panel, lid 25mm thickness; no compatible mount yet."},{"location":"history/v0.9.8.1/#new-hardware-support","title":"New Hardware Support","text":"This hardware is now fit-tested as working.
Hardware Mount Location(s) Notes Fotek SSR-60 DA solid state relay Lower bay Raspberry Pi TFTs Display mount or half-lid See below.Note: Smaller TFTs (e.g., BigTreeTech's 5\" PiTFT) will fit on the standard half-lid. Use the \"XL\" STL file for the official 7\" and similarly large TFTs.
"},{"location":"history/v0.9.8.1/#documentation-repository","title":"Documentation & Repository","text":"- Documentation site
- Modified color scheme and fonts for readability.
- Added new dark color theme.
- Implemented several Material for Mkdocs features, including icons to help with part identification.
- Improved site navigation.
- Repository
- Reorganized lids folder into \"Full-Length\" and \"Half-Lenth\" subfolders.
- Added more readme.md files for folders.
- The front main body with a 40mm intake fan partially obscures a mounting hole for the base to the main body. This leave seven (7) other mount points and is not a significant issue. The hole can safely be left empty.
Version 0.9.8 was released on 2022-08-18.
"},{"location":"history/v0.9.8/#fixes","title":"Fixes","text":"- Button head screws work for the crossbar.
- Clarified 6mm/8mm screws for power supplies.
- Documentation greatly improved for newcomers.
- Fan cages provide much more airflow, print more quickly, and use less material.
Other:
- New rear panel for the Ender 5 Plus with an 80mm fan.
- New front vents for the base and larger side vents.
- Two new optional 40mm fans concealed in the intakes.
- MCU trays can be removed without removing the rear panel.
- Fan cages have a parametric template.
- New half-length lids.
- New half-length lower bay trays.
- Lower bay trays for buck converters and simple, 4-point mounts are now Fusion 360 templates.
- New trays can be added by modifying the Fusion template and exporting the results.
- The template includes mounts with fans and the new half-length size.
- Broke out product support documentation across three pages. Each product includes images and mounting hardware.
- Divided assembly documentation into three sections and added info for Core variants.
- Improved/better overall folder structure; all panel and tray variations have a separate folder.
- Most git folders now have a
readme.mdto help with navigation and part selection.
- The front main body with a 40mm intake fan partially obscures a mounting hole for the base to the main body. This leave seven (7) other mount points and is not a significant issue. The hole can safely be left empty.
Version 0.9.9 was released on 2022-11-26.
"},{"location":"history/v0.9.9/#new-features","title":"New Features","text":""},{"location":"history/v0.9.9/#major-new-features","title":"Major New Features","text":"- Base: Issue #14: Universal power supply mount
- Attaches to the base instead of main body.
- PSU slides in from underneath.
- Allows replacing the PSU without removing other components.
- Main Body Moved CPU bay from front main body to rear:
- Added a second bay on opposite side.
- Unused second bay is an additional \"side panel\".
- Can be used to mount an extra 40mm fan, panel mounts, or leave covered with a blank plate.
- Main Body Zip tie anchors added:
- Six (6) added to crossbar.
- Four (4) added to front main body (under MCU pillars).
- Fifteen (15) added to rear main body:
- Four (4) under MCU pillars.
- Six (6) above MCU pillars.
- Five (5) by PSU wiring cutout.
- (New) Bottom Panel
- Removable panels for case underside.
- Prevents finger-pokey by curious children and dust intrusion (see Completed Requests below).
- Adds feet to the case.
- Core
- All core parts now have embossed version numbers to help with intermixing version numbers.
- Main Body
- Redesigned intakes and modified exhaust mounts.
- Easier to print.
- Made room at base for running wires through to external fans.
- Base
- Added a third front air vent.
- All three front vents how have 40mm fan mounts.
- CPU Trays
- New template and tray design
- Old trays still work.
- New tray is an easier print with fewer supports needed, can be printed in one of two orientations.
- New releases will only include new trays.
- Added Raspberry Pi tray with a 40mm fan intake.
These parts still need to be tested for fit and any other issues.
Hardware Mount Location(s) Notes Mean Well RSP-500 power supply PSU Tray For the Ender 5 Plus BIGTREETECH Manta M8P MCU Tray BIGTREETECH 5\" TFT Display Panel BIGTREETECH UPS 24V 1.0 Lower Bay Short tray only. BIGTREETECH SKR 3 MCU Tray BIGTREETECH SKR 3 EZ MCU Tray BIGTREETECH Relay 1.2 Lower Bay Long tray only."},{"location":"history/v0.9.9/#fixes","title":"Fixes","text":"- Issue #18: Fan mount blocks screw hole for mounting base
- Fan mount moved left and up as part of intake redesign.
- Issue #35: Hex nut for mounting IEC socket is hard to reach
- Removed hex nuts.
- Screws attach directly in plastic.
- Issue #33: Base zip tie anchors need adjustment
- Removed rearmost zip tie that was troublesome.
- Adjusted position of others.
- Issue #39: Display screen partially blocks two front main body/base screws
- Added cutout for access.
- Issue #37: Documentation site is missing license page
- Issue #51: Basic LM2596 mounting holes are incorrect
- Documentation site
- Added tooltips to links.
- Consolidated external links and added tooltips.
- Replaced assembly and illustration pictures with uniformly-styled generated graphics.
- Documentation site is now versioned.
- Assembly Guide
- Completely rewritten for 0.9.9.
- Basic wiring instructions included.
- Added links to additional guides for some areas.
- Video overviews for each section.
- Repository
- Documentation is no longer in the main repository.
- Renamed \"Fan Cages\" to \"Fans\".
- Further divided lids folders for ease of navigation.
- Lots of miscellaneous cleanup.
This is the initial test release of OmniBox, originally released on 2022-05-19.
Renders and Photos Big Bird V43 render Grover's new grill Grover in action Front Left Right Back (this is an example of one of the stock rear panels) Render v37 Render v42"},{"location":"support/","title":"Support Overview","text":"OmniBox has a large number of available components, many with multiple variants. Some of these have several printed pieces. Simply:
- A component is a common design, such as an MCU tray for a Bigtreetech SKR E3.
- A variant is a modified version of the stock component, such as a version of the above tray that takes heat set inserts.
- For simplicity, components and variants are parts.
Each part has an entry containing a bill of materials and other important information. Some parts have more than one printed piece; the BOM lists all printed pieces necessary and a download link.
The layout of this documentation is standardized, and most sections are organized by the name of the electronic component a part is designed to mount.
Below are explanations of the information you'll find in the Options & Support section.
"},{"location":"support/#fit-testing","title":"Fit Testing","text":"Before a component (such as a tray or panel) is merged into the main branch, it has to be tested. Parts that are waiting for fit testing are marked like so:
Fit Test Pending: Issue #NNN
If you print one of these parts, please report your results! There is usually an open issue on GitHub for that hardware component.
"},{"location":"support/#badges","title":"Badges","text":"Icon badges provide key details about a part at a glance.
"},{"location":"support/#basics","title":"Basics","text":"Size
Short
Long
Indicates the size of a part; this applies to lower bay trays and lids. Two (2) Short parts replace one (1) Long part.
Unified
Unified
Indicates a part is a single piece that replaces front and rear halves. Unified parts require large build plates.
Front and Rear
Front
Rear
Front and Rear parts can be printed in place of a Unified part. Front and Rear parts are not interchangeable, unlike Short parts. Applies to Base, Main Bodies, and Bottom Panels.
Heat Set Insert
Indicates a component or variant requires heat set inserts.
"},{"location":"support/#credits","title":"Credits","text":"Author
Name/Handle
Links to a public profile for the creator of a contributed part.
Origin
Name/Handle
If a part is derived from someone else's work, this links to their public profile.
"},{"location":"support/#versioning","title":"Versioning","text":"Template
template_version
All parts are based upon templates. These are useful in determining compatibility between parts and Core versions. See the Templates page for more.
Version
part_version
The current revision of a part. Part versions are are imprinted on newer components.
"},{"location":"support/#bases-and-psus","title":"Bases and PSUs","text":"Switch
Rocker
Identifies the type of power switch(es) compatible with a given power supply or base.
Depth
36mm
Either 36 or 42mm. For a base, this is the available depth for mounting a power supply. For a PSU, indicates the depth required.
IEC
This is only used for Bases that do not mount an IEC power inlet.
"},{"location":"support/#panel-specific","title":"Panel-specific","text":"Display
CPU
MCU
Indicates whether a display panel mounts a display that connects to a CPU or MCU.
Fan, Vent
Fan badges indicate that a part has a fan mount; vent badges signal that a part has cutouts for airflow.
Panel Mount
USB C, RJ-45
These badges list the types of panel mounts available on a given part.
"},{"location":"support/#component-types","title":"Component Types","text":""},{"location":"support/#trays","title":"Trays","text":"The four types of trays: MCU, CPU, PSU, and lower bay.Trays mount electronics most of your case's electronics.
- MCUs are mounted directly underneath the lid for easy access.
- CPUs sit on trays that can slide out the side of the case.
- Power supplies (PSUs) are inserted from below.
- Lower Bay Trays are used for parts such as buck converters and solid state relays. These occupy the middle of the case.
Panels are generally used for displays, fans, and panel-mounted connector extensions like USB ports and SD card readers. Lids can be put to a wide variety of uses, as well.
Panels cover the outside of the case.
- Display Panels mount LCD and TFT displays.
- Bottom Panels protect the PSU and allow airflow, if needed.
- Front Panels are a user-facing panel for MicroSD, USB ports, or even LED lights.
- Lids serve many purposes, including mounting large fans and/or a handle.
- Rear Panels pass-through wiring to your printer and can mount medium-sized fines.
- Side Panels are convenient air inlets and connector panels.
This page lists all bottom panels for OmniBox.
Bottom panels cover up the power supply and give your case feet.
"},{"location":"support/bottom/#front-half-panels","title":"Front Half Panels","text":"Blank/ClosedHexagonsMean Well Fan Exhaust
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Blank Front.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Hexagons Front.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Mean Well Front.stl 1 Ea"},{"location":"support/bottom/#rear-half-panels","title":"Rear Half Panels","text":"Blank/ClosedHexagons
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Blank Rear.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Hexagons Rear.stl 1 Ea"},{"location":"support/bottom/#unified-panels","title":"Unified Panels","text":"Blank/ClosedHexagonsMean Well Fan Exhaust
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Blank Unified.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Hexagons Unified.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Mean Well Unified.stl 1 Ea"},{"location":"support/core/","title":"Core","text":"This page lists all Core component configurations for OmniBox.
"},{"location":"support/core/#main-body","title":"Main Body","text":""},{"location":"support/core/#frontrear-main-body","title":"Front/Rear Main Body","text":"StockHSIFull HSI
core_v0_9_11
General Notes
Most users will need to print the Main Body as two large pieces, Front and Rear.
Materials
Type Part Qty Printed Main Body - Front - Stock.stl 1 Ea Printed Main Body - Rear - Stock.stl 1 Ea Printed Main Body - Crossbar - Stock.stl 1 Ea DIN 912 M3 x 20mm SHCS 2 Ea DIN 912 M3 x 8mm SHCS 46 Ea DIN 912 M3 x 10mm SHCS 6 Ea
core_v0_9_11
General Notes
Most users will need to print the Main Body as two large pieces, Front and Rear.
Materials
Type Part Qty Printed Main Body - Front - HSI.stl 1 Ea Printed Main Body - Rear - HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 16mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 12 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 52 Ea
core_v0_9_11
General Notes
Most users will need to print the Main Body as two large pieces, Front and Rear.
Variant Notes
\"Full HSI\" includes 24 additional inserts for mounting the lower bay trays.
Materials
Type Part Qty Printed Main Body - Front - Full HSI.stl 1 Ea Printed Main Body - Rear - Full HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 12 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 76 Ea"},{"location":"support/core/#unified-main-body","title":"Unified Main Body","text":"StockHSIFull HSI
core_v0_9_11
General Notes
Printing a unified Main Body requires a bed at least 315mm on one axis.
Materials
Type Part Qty Printed Main Body - Unified - Stock.stl 1 Ea Printed Main Body - Crossbar - Stock.stl 1 Ea DIN 912 M3 x 20mm SHCS 2 Ea DIN 912 M3 x 8mm SHCS 40 Ea DIN 912 M3 x 10mm SHCS 6 Ea
core_v0_9_11
General Notes
Printing a unified Main Body requires a bed at least 315mm on one axis.
Materials
Type Part Qty Printed Main Body - Unified - HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 16mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 46 Ea
core_v0_9_11
General Notes
Printing a unified Main Body requires a bed at least 315mm on one axis.
Materials
Type Part Qty Printed Main Body - Unified - Full HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 70 Ea"},{"location":"support/core/#base","title":"Base","text":""},{"location":"support/core/#basic-base-frontrear","title":"Basic Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 36mm Front - Basic Stock.stl 1 Ea Printed Base - 36mm Rear - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea
core_v0_9_11
36mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 36mm Front - Basic HSI.stl 1 Ea Printed Base - 36mm Rear - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 22 Ea DIN 912 M3 x 12mm SHCS 4 Ea
core_v0_9_11
42mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 42mm Front - Basic Stock.stl 1 Ea Printed Base - 42mm Rear - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea
core_v0_9_11
42mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 42mm Front - Basic HSI.stl 1 Ea Printed Base - 42mm Rear - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 22 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/core/#basic-base-unified","title":"Basic Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 36mm Unified - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 36mm Unified - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 18 Ea
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 42mm Unified - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 42mm Unified - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 18 Ea"},{"location":"support/core/#iec-socket-base-frontrear","title":"IEC Socket Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Front - Basic Stock.stl 1 Ea Printed Base - 36mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Front - Basic HSI.stl 1 Ea Printed Base - 36mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Front - Basic Stock.stl 1 Ea Printed Base - 42mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Front - Basic HSI.stl 1 Ea Printed Base - 42mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#iec-socket-base-unified","title":"IEC Socket Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Unified - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Unified - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Unified - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Unified - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#rocker-switch-base-frontrear","title":"Rocker Switch Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - Stock with Rocker.stl 1 Ea Printed Base - 36mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - HSI with Rocker.stl 1 Ea Printed Base - 36mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - Stock with Rocker.stl 1 Ea Printed Base - 42mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - HSI with Rocker.stl 1 Ea Printed Base - 42mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#rocker-switch-base-unified","title":"Rocker Switch Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC Stock with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC HSI with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC Stock with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC HSI with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#toggle-switch-base-frontrear","title":"Toggle Switch Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - Stock with Toggle.stl 1 Ea Printed Base - 36mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - HSI with Toggle.stl 1 Ea Printed Base - 36mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - Stock with Toggle.stl 1 Ea Printed Base - 42mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - HSI with Toggle.stl 1 Ea Printed Base - 42mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea"},{"location":"support/core/#toggle-switch-base-unified","title":"Toggle Switch Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC Stock with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC HSI with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC Stock with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC HSI with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea"},{"location":"support/cpu/","title":"CPUs","text":"This page lists system-on-a-chip (SoC) CPUs currently compatible with OmniBox. These are commonly known as single board computers (SBC).
CPU trays can be mounted on the left or right side of the case.
If you do not use an SBC, the side of the CPU bay can be used as a Side Panel.
"},{"location":"support/cpu/#raspberry-pi-3b","title":"Raspberry Pi 3B+","text":"cpu_v3
General Notes
(None)
Materials
Type Part Qty Printed CPU Tray V3 - RPi 3B+.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea CPU Raspberry Pi 3B+ 1GB 1 Ea"},{"location":"support/cpu/#raspberry-pi-4b","title":"Raspberry Pi 4B","text":"cpu_v3
General Notes
(None)
Materials
Type Part Qty Printed CPU Tray V3 - RPi 4B.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea"},{"location":"support/cpu/#raspberry-pi-and-compatible","title":"Raspberry Pi and compatible","text":"No FanNo Fan, HSI40mm Fan40mm Fan, HSI50mm Fan50mm Fan, HSI
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray without Fan.stl 1 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray without Fan - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray with 40mm Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray w 40mm Fan - HSI.stl 1 Ea Fan 40mm x 10mm Axial Fan 4 Ea DIN 912 M3 x 12mm SHCS 16 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray with 50mm Fan.stl 1 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray w 50mm Fan - HSI.stl 1 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/display/","title":"Displays","text":"This page lists all displays compatible with OmniBox.
Display panels are the primary method of interacting with your OmniBox.
"},{"location":"support/display/#bigtreetech-35-tft","title":"Bigtreetech 3.5\" TFT","text":"display_v2
MCU
General Notes
This is not the E3 version, which has its own display mount.
Materials
Type Part Qty Printed Display Panel - BTT TFT35.stl 1 Ea Display Bigtreetech 3.5\" TFT 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M3 x 8mm SHCS 4 Ea"},{"location":"support/display/#bigtreetech-35-tft-e3","title":"Bigtreetech 3.5\" TFT E3","text":"display_v3
MCU
General Notes
(None)
Materials
Type Part Qty Printed Display Panel - BTT TFT35-E3.stl 1 Ea Display Bigtreetech 3.5\" TFT E3 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/display/#bigtreetech-hdmi5","title":"Bigtreetech HDMI5","text":"display_v2
SirUli
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display - BTT HDMI5 - Panel - HSI.stl 1 Ea Printed Display - BTT HDMI5 - Holder.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Display Bigtreetech HDMI5 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M3 x 15mm SHCS 4 Ea"},{"location":"support/display/#bigtreetech-pi-tft50","title":"Bigtreetech Pi TFT5.0","text":"StockHSI
display_v2
MaffooClock
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display Panel - BTT PI TFT50.stl 1 Ea Printed Display Mount - BTT PI TFT50.stl 1 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M2.5 x 6mm SHCS 8 Ea
display_v2
MaffooClock
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display Panel - BTT PI TFT50 - HSI.stl 1 Ea Printed Display Mount - BTT PI TFT50.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M2.5 x 6mm SHCS 8 Ea"},{"location":"support/display/#generic-128x64","title":"Generic 128x64","text":"display_v2
MCU
General Notes
- Also known as Creality CR-10 stock display in Marlin.
- Common on many older i3-style and Creality printers.
Materials
Type Part Qty Printed Display Panel - Generic 12864.stl 1 Ea Display Generic 128x64 Display 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/display/#generic-raspberry-pi-tft","title":"Generic Raspberry Pi TFT","text":"display_v2
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display Mount - Raspberry Pi TFT.stl 1 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M2.5 x 6mm SHCS 4 Ea Other Fasteners M2.5 Brass Standoff, Female/Male, 12mm + 6mm 4 Ea"},{"location":"support/display/#mini-12864","title":"Mini 12864","text":"display_v2
MCU
General Notes
Compatible with FYSETC, Bigtreetech, and other brands.
Materials
Type Part Qty Printed Display Mount - Mini 12864 - Panel.stl 1 Ea Printed Display Mount - Mini 12864 - Front Plate.stl 1 Ea Printed Display Mount - Mini 12864 - Spacer.stl 1 Ea Display Mini 12864 Display 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M3 x 20mm SHCS 4 Ea"},{"location":"support/fans/","title":"Fans","text":"This is a list of all fans sizes that OmniBox currently supports via fan cages. OmniBox has optional, concealed mounts for 40mm x 10mm fans. These do not use fan cages or gaskets.
40mm fans are the most commonly used. Rear panels can support fans up to 80mm and lids up to 120mm.
Fan cages and fan gaskets are stored in the /Fans git folder. The /Fans/Template folder contains parametric Fusion 360 files to add support for additional fans.
40x10
Product Link
- Internal Materials: 4x M3 x 16mm (12mm if counterbored)
- External Materials: 4x M3 x 20mm
- Fits: Side Panel, Lids, Rear Panel
40x20
Product Link
- Internal Materials: 4x M3 x 25mm (20mm if counterbored)
- External Materials: 4x M3 x 30mm
- Fits: Side Panel, Lids, Rear Panel
Fit Test Pending: See Issue #122
50x10
Product Link
- Materials: 4x M3 x 15mm
- Fits: Side Panel, Lids, Rear Panel
50x12
Product Link
- Materials: 4x M3 x 16mm
- Fits: Side Panel, Lids, Rear Panel
- Notes:
- This part will not fit 10mm deep fans (5010 fans).
- These fans are uncommon and normally 12V.
Fit Test Pending: See Issue #122
50x15
Product Link
- Materials: 4x M3 x 20mm
- Fits: Side Panel, Lids, Rear Panel
60x15
Product Link
- Materials: 4x M3 x 25mm
- Fits: Lids, Rear Panel
60x20
Product Link
- Materials: 4x M3 x 30mm
- Fits: Lids, Rear Panel
60x25
Product Link
- Materials: 4x M3 x 35mm
- Fits: Lids, Rear Panel
80x20
Product Link
- Materials: 4x M4 x 30mm
- Fits: Lids, Rear Panel
80x25
Product Link
- Materials: 4x M4 x 35mm
- Fits: Lids, Rear Panel
92x25
Product Link
- Materials: 4x M4 x 35mm
- Fits: Lids
120x25
Product Link
- Materials: 4x M4 x 35mm
- Fits: Lids
This page lists all front panels for OmniBox.
Front panels provide ventilation and can mount SD card extensions, USB connectors, or even LED lights.
"},{"location":"support/front/#blank","title":"Blank","text":"fp_v1
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - Blank.stl 1 Ea"},{"location":"support/front/#microsd-extension","title":"MicroSD Extension","text":"HexagonsSlatsSlots
fp_v1
MicroSD
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, Hexagons.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea
fp_v1
MicroSD
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, Slats.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea
fp_v1
MicroSD
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, Slots.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea"},{"location":"support/front/#microsd-and-usb-b-extensions","title":"MicroSD and USB B Extensions","text":"HexagonsSlatsSlots
fp_v1
MicroSD, USB B
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB B, Hexagons.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea
fp_v1
MicroSD, USB B
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB B, Slats.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea
fp_v1
MicroSD, USB B
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB B, Slots.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea"},{"location":"support/front/#microsd-and-usb-c-extensions","title":"MicroSD and USB C Extensions","text":"HexagonsSlatsSlots
fp_v1
MicroSD, USB C
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB C, Hexagons.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea
fp_v1
MicroSD, USB C
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB C, Slats.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea
fp_v1
MicroSD, USB C
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB C, Slots.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea"},{"location":"support/front/#vent-only","title":"Vent Only","text":"HexagonsSlatsSlots
fp_v1
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - Vent Only Hexagons.stl 1 Ea
fp_v1
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - Vent Only Slats.stl 1 Ea
fp_v1
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - Vent Only Slots.stl 1 Ea"},{"location":"support/lid/","title":"Lids","text":"This page lists all lids available for OmniBox.
"},{"location":"support/lid/#120mm-fan-lids","title":"120mm Fan Lids","text":"120mm Fan120mm Fan, Handle120mm Fan, Handle, HSI
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Fan Only.stl 1 Ea Fan 120mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 12025 - Screen.stl 1 Ea Printed Fan Gasket - 12025.stl 1 Ea
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - 120mm Fan and Handle.stl 1 Ea Printed Carry Handle - Stock.stl 1 Ea DIN 912 M3 x 8mm SHCS 2 Ea Fan 120mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 12025 - Screen.stl 1 Ea Printed Fan Gasket - 12025.stl 1 Ea
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - 120mm Fan and Handle.stl 1 Ea Printed Carry Handle - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 6mm SHCS 2 Ea Fan 120mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 12025 - Screen.stl 1 Ea Printed Fan Gasket - 12025.stl 1 Ea"},{"location":"support/lid/#carry-handle-lid","title":"Carry Handle Lid","text":"LongLong, HSIShortShort, HSI
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Carry Lid.stl 1 Ea Printed Carry Handle - Stock.stl 1 Ea DIN 912 M3 x 8mm SHCS 2 Ea
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Carry Lid.stl 1 Ea Printed Carry Handle - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 6mm SHCS 2 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Carry Lid.stl 1 Ea Printed Carry Handle - Stock.stl 1 Ea DIN 912 M3 x 8mm SHCS 2 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Carry Lid.stl 1 Ea Printed Carry Handle - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 6mm SHCS 2 Ea"},{"location":"support/lid/#raspberry-pi-display-lids","title":"Raspberry Pi Display Lids","text":"5in RPi TFT7in RPi TFT
lid_v1
Short
CPU
General Notes
These lids use the mounting pattern from a Raspberry Pi; as such, they are compatible with any display that mounts a Raspberry Pi on the back.
Materials
Type Part Qty Printed Lid - RPi TFT.stl 1 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M2.5 x 6mm SHCS 4 Ea Other Fasteners M2.5 Brass Standoff, Female/Male, 12mm + 6mm 4 Ea
lid_v1
Short
CPU
General Notes
These lids use the mounting pattern from a Raspberry Pi; as such, they are compatible with any display that mounts a Raspberry Pi on the back.
Materials
Type Part Qty Printed Lid - XL RPi TFT.stl 1 Ea Display Raspberry Pi 7\" TFT 1 Ea DIN 912 M2.5 x 6mm SHCS 4 Ea Other Fasteners M2.5 Brass Standoff, Female/Male, 12mm + 6mm 4 Ea"},{"location":"support/lid/#rubbermaid-21-cup-drybox","title":"Rubbermaid 21 cup Drybox","text":"lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Drybox Holder - Rubbermaid 21qt.stl 1 Ea"},{"location":"support/lid/#short-fan-lids","title":"Short Fan Lids","text":"Dual 40mm Fans80mm Fan92mm Fan
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Fan 40mm x 10mm Axial Fan 2 Ea Printed 4010 Fan Cage.stl 2 Ea Printed 4010 Fan Gasket, TPU.stl 2 Ea DIN 912 M3 x 16mm SHCS 8 Ea Printed Half Lid - Dual 40mm Fans.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Lid - 80mm Fan.stl 1 Ea Fan 80mm x 20mm Axial Fan 1 Ea DIN 912 M4 x 30mm SHCS 4 Ea Printed 8020 Fan Cage.stl 1 Ea Printed 8020 Fan Gasket.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Lid - 92mm Fan.stl 1 Ea Fan 92mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 9225 - Screen.stl 1 Ea Printed Fan Gasket - 9225.stl 1 Ea"},{"location":"support/lid/#simpleblank-lids","title":"Simple/Blank Lids","text":"Long BlankShort BlankShort Vent
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Long Blank.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lid - Short Blank.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lid - Short Vent.stl 1 Ea"},{"location":"support/lid/#spool-roller-lid","title":"Spool Roller Lid","text":"lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Spool Roller.stl 1 Ea Printed Spool Roller.stl 4 Ea DIN 912 M3 x 16mm SHCS 4 Ea Bearings 688ZZ Radial Ball Bearing 4 Ea"},{"location":"support/lower_bay/","title":"Lower Bay","text":"Lower Bay Trays may be Short or Long. A Long tray covers the mount points of two Short trays and must be mounted from side-to-side in the case.
Every tray (short or long) attaches to the Core case body with four (4) M3 x 6mm screws. Additional materials are listed with each part.
Up to three (3) Long trays will fit in a case, or six (6) Short trays. A Short tray is pictured."},{"location":"support/lower_bay/#basic-lm2596","title":"Basic LM2596","text":"ShortShort, DualLong, FanLong, DualLong, Dual, Fan
lower_bay_v1
Short
Single
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Buck Converter Basic LM2596 1 Ea Printed Lower Bay Tray - Generic LM2596 - Short Single Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea
lower_bay_v1
Short
Dual
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Short Dual Tray.stl 1 Ea Buck Converter Basic LM2596 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea
lower_bay_v1
Long
Single
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Long Single with Fan.stl 1 Ea Buck Converter Basic LM2596 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea
lower_bay_v1
Long
Dual
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Long Dual Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter Basic LM2596 2 Ea
lower_bay_v1
Long
Dual
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Long Dual with Fan.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter Basic LM2596 2 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/lower_bay/#bigtreetech-relay","title":"Bigtreetech Relay","text":"lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - BIGTREETECH Relay 1.2.stl 1 Ea Other Electrical Bigtreetech Relay 1.2 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/lower_bay/#bigtreetech-u2c-can-adapter","title":"Bigtreetech U2C CAN Adapter","text":"lower_bay_v1
edgy
General Notes
- Socket head screws are too large for the terminals.
- See the Printables page for more details.
Materials
Type Part Qty Printed OmniBox Lower Bay Short Tray for BTT U2C (Printables) 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Other Electrical Bigtreetech U2C CAN Adapter 1 Ea DIN 7380 M3 x 6mm BHCS 4 Ea"},{"location":"support/lower_bay/#bigtreetech-ups-24v","title":"Bigtreetech UPS 24V","text":"Fit Test Pending: See Issue #24
lower_bay_v1
General Notes
(None)
Materials
Type Part Qty Printed Bigtreetech UPS 24V 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Other Electrical Bigtreetech UPS 24V 1 Ea"},{"location":"support/lower_bay/#creality-mosfet","title":"Creality MOSFET","text":"ShortShort, HSILongLong, HSI
lower_bay_v1
Short
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Short.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Electrical Creality MOSFET 1 Ea
lower_bay_v1
Short
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Short HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Other Electrical Creality MOSFET 1 Ea
lower_bay_v1
Long
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Long.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Electrical Creality MOSFET 1 Ea
lower_bay_v1
Long
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Long HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Other Electrical Creality MOSFET 1 Ea"},{"location":"support/lower_bay/#drok-3a-lm2596","title":"DROK 3A LM2596","text":"ShortLong, DualLong, Dual, Fan
lower_bay_v1
Short
single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - DROK 3A LM2596 - Short Single Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter DROK 3A LM2596 with LED 1 Ea
lower_bay_v1
Long
Dual
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - DROK 3A LM2596 - Long Dual Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter DROK 3A LM2596 with LED 1 Ea
lower_bay_v1
Long
Dual
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - DROK 3A LM2596 - Long Single with Fan.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea Buck Converter DROK 3A LM2596 with LED 1 Ea"},{"location":"support/lower_bay/#drok-5a-buck-converter","title":"DROK 5A Buck Converter","text":"LongLong, Wago
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 63mm x 40.5mm.
Materials
Type Part Qty Printed Lower Bay - DROK 5A Buck with LED.stl 1 Ea Buck Converter DROK 5A Buck with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 63mm x 40.5mm.
Materials
Type Part Qty Printed Lower Bay - DROK 5A Buck with LED - Dual Wago.stl 1 Ea Electrical Connector Wago 221-413 3-Position Lever Nut 2 Ea Buck Converter DROK 5A Buck with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/lower_bay/#drok-lm2596-with-led","title":"DROK LM2596 with LED","text":"ShortLong, FanLong, DualLong, Dual, Fan
lower_bay_v1
Short
Single
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Printed Lower Bay Tray - DROK 3A LM2596 - Short Single Tray.stl 1 Ea
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea Printed Lower Bay Tray - DROK LM2596 - Long Single with Fan.stl 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - DROK LM2596 - Long Dual.stl 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - DROK LM2596 - Long Dual with Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/lower_bay/#fotek-ssr-40-da","title":"Fotek SSR-40 DA","text":"ShortLong
lower_bay_v1
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay - SSR-40 DA - Short.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Other Electrical Fotek SSR-40 DA 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay - SSR-40 DA - Long.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Other Electrical Fotek SSR-40 DA 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea"},{"location":"support/lower_bay/#hiletgo-lm2596-with-led","title":"HiLetGo LM2596 with LED","text":"ShortLong, FanLong, DualLong, Dual, Fan
lower_bay_v1
Short
Single
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Printed Lower Bay Tray - HiLetGo LM2596 - Short Single.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter HiLetGo 2A LM2596 with LED 1 Ea
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Printed Lower Bay Tray - HiLetGo LM2596 - Long Single with Fan.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea Buck Converter HiLetGo 2A LM2596 with LED 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Buck Converter HiLetGo 2A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - HiLetGo LM2596 - Long Dual.stl 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Buck Converter HiLetGo 2A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - HiLetGo LM2596 - Long Dual with Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/lower_bay/#lower-bay-40mm-fan","title":"Lower Bay 40mm Fan","text":"lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - 40mm Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/lower_bay/#omron-g3nag3a-ssr","title":"Omron G3NA/G3A SSR","text":"LongShort
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - 48mm SRR - Long Tray.stl 1 Ea Other Electrical Omron G3NA/G3A Solid State Relay 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - 48mm SRR - Short Tray.stl 1 Ea Other Electrical Omron G3NA/G3A Solid State Relay 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/lower_bay/#wago-221-series-lever-nuts","title":"Wago 221 Series Lever Nuts","text":"4x 3 Pos4x 5 Pos, 2x 3 Pos4x 5 Pos8x 3 Pos
lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-413 3-Position Lever Nut 4 Ea Printed Lower Bay Tray - Wago Nuts - 3Px4.stl None Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-413 3-Position Lever Nut 2 Ea Electrical Connector Wago 221-415 5-Position Lever Nut 4 Ea Printed Lower Bay Tray - Wago Nuts - 5Px4, 3Px2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-415 5-Position Lever Nut 4 Ea Printed Lower Bay Tray - Wago Nuts - 5Px4.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-413 3-Position Lever Nut 8 Ea Printed Lower Bay Tray - Wago Nuts - 8x3P.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/","title":"MCUs","text":"This page lists microcontroller boards that are currently compatible with OmniBox.
MCUs are mounted near the lid for accessibility.
Tip
Looking for a board that isn't listed? Open an issue!
"},{"location":"support/mcu/#btt-skr-e3-and-skr-pico","title":"BTT SKR E3 and SKR Pico","text":"mcu_v2
Dual
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - SKR E3 + Pico v2.stl 1 Ea MCU Bigtreetech SKR E3 Series 1 Ea MCU Bigtreetech SKR Pico 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/mcu/#bigtreetech-manta-e3ez","title":"Bigtreetech Manta E3EZ","text":"Fit Test Pending: See Issue #135
StockHSI
mcu_v2
Single
General Notes
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta E3EZ v2 - Stock.stl 1 Ea MCU Bigtreetech Manta E3 EZ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Single
General Notes
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta E3EZ v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea MCU Bigtreetech Manta E3 EZ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-manta-m5p","title":"Bigtreetech Manta M5P","text":"Fit Test Pending: See Issue #136
mcu_v2
Single
General Notes
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta M5P v2.stl 1 Ea MCU Bigtreetech Manta M5P 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-manta-m8p","title":"Bigtreetech Manta M8P","text":"mcu_v2
Single
General Notes
- Compatible with all versions.
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta M8P v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech Manta M8P 1 Ea"},{"location":"support/mcu/#bigtreetech-octopusoctopus-pro","title":"Bigtreetech Octopus/Octopus Pro","text":"mcu_v2
Single
General Notes
- All members of the Octopus series (Octopus, Octopus Pro) are compatible.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Octopus - v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech Octopus Series 1 Ea"},{"location":"support/mcu/#bigtreetech-skr-13142","title":"Bigtreetech SKR 1.3/1.4/2","text":"mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKR v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech SKR v1.3-2.0 1 Ea"},{"location":"support/mcu/#bigtreetech-skr-3","title":"Bigtreetech SKR 3","text":"Fit Test Pending: See Issue #48
mcu_v2
single
General Notes
- SKR 3 EZ and earlier SKR models are incompatible.
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT SKR 3 v2.stl 1 Ea MCU Bigtreetech SKR 3 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-skr-3-ez","title":"Bigtreetech SKR 3 EZ","text":"mcu_v2
single
General Notes
- Incompatible with the SKR 3.
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT SKR 3 EZ - v2.stl 1 Ea MCU Bigtreetech SKR 3 EZ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-skr-e3-series","title":"Bigtreetech SKR E3 Series","text":"SingleDual
mcu_v2
Single
General Notes
- Compatible with all BTT SKR E3 boards.
- Compatible with all Creality 1.x and 4.x boards.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT SKR E3 v2.stl 1 Ea MCU Bigtreetech SKR E3 Series 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Dual
General Notes
- Compatible with all BTT SKR E3 boards.
- Compatible with all Creality 1.x and 4.x boards.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - Double SKR E3 v2.stl 1 Ea MCU Bigtreetech SKR E3 Series 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/mcu/#bigtreetech-skr-pico","title":"Bigtreetech SKR Pico","text":"Single, HSIDual, StockDual, HSI
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKR Pico - v2 HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea MCU Bigtreetech SKR Pico 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Dual
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - Dual BTT SKR Pico v2 - Stock.stl 1 Ea MCU Bigtreetech SKR Pico 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea
mcu_v2
Dual
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - Dual BTT SKR Pico v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 8 Ea MCU Bigtreetech SKR Pico 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/mcu/#bigtreetech-skrat","title":"Bigtreetech SKRat","text":"StockHSI
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKRat v2 Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech SKRat 1 Ea
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKRat v2 HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech SKRat 1 Ea"},{"location":"support/mcu/#creality-2x-series","title":"Creality 2.x Series","text":"StockHSI
mcu_v2
Mr Meh
Single
General Notes
Compatible with all 2.x.x versions.
Materials
Type Part Qty Printed MCU Tray - M3 Creality 2.5.2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Creality 2.x Series 1 Ea
mcu_v2
Mr Meh
Single
General Notes
Compatible with all 2.x.x versions.
Materials
Type Part Qty Printed MCU Tray - M3 - HSI - Creality 2.5.2.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Creality 2.x Series 1 Ea"},{"location":"support/mcu/#duet3d-duet-3-6hc","title":"Duet3D Duet 3 6HC","text":"mcu_v2
Single
General Notes
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - Duet3D Duet 3 6HC v2.stl 1 Ea MCU Duet3D Duet 3 6HC 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#duet3d-duet-3-mini-5","title":"Duet3D Duet 3 Mini 5+","text":"mcu_v2
Single
General Notes
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - Duet3D Duet 3 Mini 5+ v2.stl 1 Ea MCU Duet3D Duet 3 Mini 5+ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#fysetc-spider-series","title":"FYSETC Spider Series","text":"mcu_v2
MaffooClock
Single
General Notes
- Tested with version 2.x, may work with version 1.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - FYSETC Spider v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU FYSETC Spider Series 1 Ea"},{"location":"support/mcu/#makerbase-mks-monster-8","title":"MakerBase MKS Monster 8","text":"Fit Test Pending: See Issue #74
StockHSI
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Monster8 v2 - Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU MKS Monster8 1 Ea
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Monster8 v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU MKS Monster8 1 Ea"},{"location":"support/mcu/#makerbase-mks-skipr","title":"MakerBase MKS Skipr","text":"StockHSI
mcu_v2
Killajoedotcom
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Skipr v2 - Stock.stl 1 Ea MCU MKS Skipr 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Killajoedotcom
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Skipr v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea MCU MKS Skipr 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/panel_mounts/","title":"Panel Mounts","text":""},{"location":"support/panel_mounts/#using-panel-mounts","title":"Using Panel Mounts","text":"Panel mounts allow you to disconnect components without opening up the case. Some examples:
- USB extensions for a webcam.
- MicroSD extensions for an MCU or SBC.
- Rear panel connectors for disconnecting the printer's wiring harness.
Each panel type comes with a template for making your own panels. See Creating New Panels below for more.
"},{"location":"support/panel_mounts/#fans","title":"Fans","text":"See the Fans page for a list of all fan options.
"},{"location":"support/panel_mounts/#microsd-extensions","title":"MicroSD Extensions","text":"These are availabe in short or long versions and are typically used with MCUs, though they can also be used with a CPU, such as a Raspberry Pi.
Most MCUs recommend either a short MicroSD extension (15cm/6\" long) or longer (48cm/18\") should be used.
MicroSD Extension, 15cm
MicroSD Extension, 48cm
"},{"location":"support/panel_mounts/#usb-extensions","title":"USB Extensions","text":"Right angle connectors are often a good choice, particularly for CPUs and large MCUs.
USB 2 Type A Panel Mount
USB 2 Type B Panel Mount
USB 3 Type A Panel Mount
USB C Panel Mount Extension
"},{"location":"support/panel_mounts/#keystone-jacks","title":"Keystone Jacks","text":"Keystone jacks support a variety of multimedia cables: USB, HDMI, and Ethernet, among others. As a result, keystone jacks offer flexibility in choosing which connectors to mount. A blank plate can occupy an unused jack cutout.
These are commonly used on the front, side, or rear panels. Currently, designs with keystone jack cutouts exist for the front and side panels.
Below are several common keystone jacks.
USB 3.0 Keystone Jack
HDMI Keystone Jack
RJ45 Keystone Jack
USB C Keystone Jack
"},{"location":"support/panel_mounts/#other-connectors","title":"Other Connectors","text":"JST SM and Molex's Micro Fit 3.0 connectors can both be panel-mounted. These are useful when creating detachable wiring harnesses.
"},{"location":"support/panel_mounts/#jst-sm","title":"JST SM","text":"Caution: Avoid JST SM as a hotend connector for enclosed printers
These are good, low-current (3A max) connectors for devices such as limit switches, lights, steppers, and fans. However, they are larger than connectors with similar pin spacings.
JST SM Kit
Further reading: JST SM on The Clockmaker Project
"},{"location":"support/panel_mounts/#molex-micro-fit-30","title":"Molex Micro Fit 3.0","text":"These make excellent connectors for printers, particularly for hotends. They are rated to 5 Amperes with standard pins (9.5A with gold pins).
Connectors up to 2 row, 24 positions are available.
Molex MicroFit 3.0 Kit
Further reading: Molex Micro Fit 3.0 on The Clockmaker Project
"},{"location":"support/panel_mounts/#xt-60","title":"XT-60","text":"This connector is most well known for RC electronics and Creality printer beds. They should be used with 12 AWG wire for their rated current, though 13 AWG/2.5mm2 is often used for 220W beds.
XT60E-M Male Panel Mount
XT60E-F Female Panel Mount
Further reading: XT-60 on The Clockmaker Project
"},{"location":"support/panel_mounts/#molex-mini-fit-jr","title":"Molex Mini Fit Jr.","text":"Mini Fit Jr connectors are commonly seen in computers for the ATX and PCIE connectors. They are reliable connectors rated up to 9.5A with 18 AWG (~1 mm2) wires.
Mini Fit Jr 2 Position Connector Sets
Mini Fit Jr 4 Position Connector Sets
Further reading: Mini Fit Jr on The Clockmaker Project
"},{"location":"support/panel_mounts/#creating-new-panels","title":"Creating New Panels","text":"In addition to templates for the panels themselves, template cutouts are available for panel-mounted connectors.
Panel Mounts
The solid bodies in the STEP and Fusion 360 files:
- Have sufficient clearance to insert the connector; and
- Are the correct thickness for the connector (e.g. for panel mount ears to engage).
The Fusion 360 file also contains sketches for cut-and-paste.
"},{"location":"support/panel_mounts/#other-templates","title":"Other Templates","text":"Ginger Saw published on Printables a more extensive set of JST SM panel mounts, up to 10 pins.
JST SM Panel Mounts for 1.5-2mm panels
"},{"location":"support/psu/","title":"PSUs","text":"This page lists power supplies (PSUs) currently supported by OmniBox.
Power supplies are mounted underneath the case body.
Note: Mean Well Clones
There are several brands of clones, usually using the same model number as Mean Well. The most common of these is the Landy LRS-350-24. These clones are generally compatible with the Mean Well trays.
"},{"location":"support/psu/#mean-well-lrs-350-series","title":"Mean Well LRS-350 Series","text":"StockHSI
psu_v2
36mm
Any
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-350 - Left.stl 1 Ea Printed PSU Mount - LRS-350 - Right.stl 1 Ea PSU Mean Well LRS-350 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea
psu_v2
36mm
Any
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-350 - Left HSI.stl 1 Ea Printed PSU Mount - LRS-350 - Right HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea PSU Mean Well LRS-350 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea"},{"location":"support/psu/#mean-well-rsp-500-series","title":"Mean Well RSP-500 Series","text":"StockHSI
psu_v2
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - RSP-500 - Left.stl 1 Ea Printed PSU Mount - RSP-500 - Right.stl 1 Ea PSU Mean Well RSP-500 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea
psu_v2
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - RSP-500 - Left HSI.stl 1 Ea Printed PSU Mount - RSP-500 - Right HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea PSU Mean Well RSP-500 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea"},{"location":"support/rear/","title":"Rear Panels","text":"This page lists all side panels for OmniBox.
Rear panels serve many purposes.
"},{"location":"support/rear/#generic-no-fan","title":"Generic (No Fan)","text":"No USBUSB BUSB C
rear_v2
General Notes
(None)
Materials
Type Part Qty Printed Generic No USB.stl 1 Ea
rear_v2
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic Panel USB B.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea
rear_v2
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic Panel USB C.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea"},{"location":"support/rear/#generic-with-60mm-fan","title":"Generic with 60mm Fan","text":"No USBUSB BUSB C
rear_v2
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock.stl 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v2
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic USB B with Fan.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v2
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic USB C with Fan.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea"},{"location":"support/rear/#generic-with-dual-60mm-fans","title":"Generic with Dual 60mm Fans","text":"No USBNo USB, HSIUSB AUSB A, HSIUSB BUSB B, HSIUSB CUSB C, HSI
rear_v3
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock.stl 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB A
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB A.stl 1 Ea Connector Extension USB 2 Type A Panel Mount 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB A
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB A.stl 1 Ea Connector Extension USB 2 Type A Panel Mount 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB B.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - HSI USB B.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB C.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - HSI USB C.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea"},{"location":"support/side/","title":"Side Panels","text":"This page lists all side panels for OmniBox.
Side panels can mount CPU trays, fans, or connectors.
"},{"location":"support/side/#blank-side-panel","title":"Blank Side Panel","text":"side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel V2 - Blank.stl 1 Ea"},{"location":"support/side/#internal-40mm-fan","title":"Internal 40mm Fan","text":"OmniBox LogoOmniBox Logo, HSI
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 40mm Fan - OmniBox Logo.step 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 40mm Fan - OmniBox Logo - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/side/#internal-50mm-fan","title":"Internal 50mm Fan","text":"Classic GrillClassic Grill, HSI
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 50mm Fan - Grill.stl 1 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 50mm Fan - Grill - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea"},{"location":"support/side/#keystone-jacks","title":"Keystone Jacks","text":"side_v2
Keystone Jacks
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - Keystone - 3 Keys.stl 1 Ea"},{"location":"support/side/#rj-45-and-usb-panel-mounts","title":"RJ-45 and USB Panel Mounts","text":"1x RJ-45, 2x Single USB1x RJ-45, 1x Dual USB
side_v2
RJ-45, 2x USB B
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - RJ45 and 2x Single USB.stl 1 Ea Connector Extension USB 3 Type A Panel Mount 2 Ea Connector Extension RJ45 Panel Mount 1 Ea
side_v2
RJ-45, 2x USB B
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - RJ45 and 1x Dual USB.stl 1 Ea Connector Extension RJ45 Panel Mount 1 Ea Connector Extension USB 3 Dual Panel Mount 1 Ea"},{"location":"upgrade/","title":"Upgrading Overview","text":"A finished OmniBox is an investment that can grow with your needs. The Core case is designed for flexibility and reuse, and every effort is made to avoid incompatibilities between versions.
"},{"location":"upgrade/#core-compatibility","title":"Core Compatibility","text":"Upgrading an OmniBox is typically done by upgrading the Main Body and retaining an old Base.
"},{"location":"upgrade/#v0981-and-earlier","title":"v0.9.8.1 and Earlier","text":"Releases prior to v0.9.9 cannot be partially upgraded and are considered deprecated.
"},{"location":"upgrade/#v099","title":"v0.9.9","text":"The Base is freely compatible with v0.9.10's Main Body. v0.9.11 is compatible aside from cosmetic differences.
"},{"location":"upgrade/#v0910","title":"v0.9.10","text":"v0.9.10 is compatible with v0.9.11 aside from cosmetic differences between Main Body and Base.
"},{"location":"upgrade/#tray-and-panel-compatibility","title":"Tray and Panel Compatibility","text":"See the Templates page for details.
"},{"location":"upgrade/templates/","title":"Templates","text":"As of v0.9.11, all trays and panels have templates. Most parts have STEP files available for modification, as well.
MCU Tray Template
"},{"location":"upgrade/templates/#cpu-tray","title":"CPU Tray","text":"Version Introduced Compatibility Notes cpu_v1 v0.9 v0.9 - v0.9.8.1 Deprecated. cpu_v2 v0.9.9 v0.9 - v0.9.10 cpu_v3 v0.9.11 v0.9.11 - Not compatible with v1 and 2.CPU Tray Template
"},{"location":"upgrade/templates/#psu-tray","title":"PSU Tray","text":"Version Introduced Compatibility Notes psu_v1 v0.9.9 v0.9.9 - v0.9.10 psu_v2 v0.9.11 v0.9.11 -TODO
A v2 template will be included with 0.9.11.
"},{"location":"upgrade/templates/#panels","title":"Panels","text":""},{"location":"upgrade/templates/#bottom-panel","title":"Bottom Panel","text":"Version Introduced Compatibility Notes bottom_v1 v0.9.9 v0.9.9 - v0.9.10 bottom_v2 v0.9.10 v0.9.9 - v0.9.10 Interchangeable with v1. bottom_v3 v0.9.11 v0.9.11 -Bottom Panel Template
"},{"location":"upgrade/templates/#display-panel","title":"Display Panel","text":"Version Introduced Compatibility Notes display_v1 v0.9 v0.9 - v0.9.7 Used M4 screws; deprecated. display_v2 v0.9.8 v0.9.8 - display_v3 v0.9.10 v0.9.8 - Lighter and faster print than v2.Display Panel Template
"},{"location":"upgrade/templates/#front-panel","title":"Front Panel","text":"Version Introduced Compatibility Notes fp_v1 v0.9 v0.9 -Front Panel Template
"},{"location":"upgrade/templates/#lid","title":"Lid","text":"Version Introduced Compatibility Notes lid_v1 v0.9 v0.9 - v0.9.5 Deprecated. lid_v2 v0.9.7 v0.9.7 -Lid Template
"},{"location":"upgrade/templates/#rear-panel","title":"Rear Panel","text":"Version Introduced Compatibility Notes rear_v1 v0.9 v0.9 - v0.9.7 Deprecated; uses M4 screws. rear_v2 v0.9.8 v0.9.8 - rear_v3 v0.9.10 v0.9.8 - Compatible with v2.Rear Panel Template
"},{"location":"upgrade/templates/#side-panel","title":"Side Panel","text":"Version Introduced Compatibility Notes side_v1 v0.9.9 v0.9.9 - v0.9.10 side_v3 v0.9.11 v0.9.11 - Version jumped to match CPU trays.Side Panel Template
"}]} \ No newline at end of file +{"config":{"lang":["en"],"separator":"[\\s\\-]+","pipeline":["stopWordFilter"]},"docs":[{"location":"","title":"OmniBox v0.9.11","text":""},{"location":"#about-omnibox","title":"About OmniBox","text":"OmniBox is a 3D printable, modular electronics case for 3D printers. It supports a wide variety of parts and includes templates to add new ones.
This project is loosely derived from Steve Burcham's Stand Alone Main Control Case V3. It is released under the MIT License and is distributed free of charge.
Tip
To change documentation versions, select a version number from the drop down box at the top of the page.
To switch between Light and Dark reading mode, click the icon next to the search box.
"},{"location":"#quick-links","title":"Quick Links","text":""},{"location":"#getting-started","title":"Getting Started","text":"Visual Guided Tour Bill of Materials Supported Products
"},{"location":"#guides","title":"Guides","text":"Printing Guide Assembly Guide Upgrade Guide
"},{"location":"#community-links","title":"Community Links","text":"Discord Server GitHub Discussions
"},{"location":"#current-status","title":"Current Status","text":"A complete OmniBox made of parts from one release is tested to fit and work together. The developer completes at least two full builds for each release and new releases are also community-tested. The Version History page contains information on the latest release, fixes, new features, and known issues.
"},{"location":"#upgrading","title":"Upgrading","text":"Trays and panels are typically compatible between releases. Recent Core case versions may be partially upgraded rather than entirely reprinted. See the Upgrade Guide for details.
"},{"location":"bom/","title":"Bill of Materials","text":"The Universal Bill of Materials is a base list common to all builds. Additional components (including fasteners) are listed separately below.
- There are no affiliate links used on this site.
- The shopping cart icon indicates an external link to a shopping website.
- These links are not an endorsement and are for reference only.
- The design allows for longer-than-specified screws in many locations. The assembly guide notes where substitutions can be made.
- Wiring is only specified for the IEC power socket, power switch, and power supply. Additional wiring and fusing considerations are configuration-specific.
These parts are common to all case builds. See below for additional requirements based on configuration.
Item Qty UOM Note PLA+ or PETG filament 2 kg Typical use is less than 1.5kg (PLA+). TPU 95A filament 0.05 kg Optional. Quantity is maximum estimated. 16 awg/1.25mm stranded hookup wire 0.5 m Prefer red. Spade connectors, 14-16 awg, Female, Insulated 3 ea Fork connectors, 14-16 awg, #8, Insulated 1 ea Ring connectors can be used as well. IEC C14 socket with fuse 1 ea Glass Fuse, 5x20mm 1 ea See note below. Compatible power switch 1 ea See the Power Switch section. Compatible MCU 1 ea See the Supported Parts list. Compatible display 1 ea See the Supported Parts list. Compatible PSU 1 ea See the Supported Parts list.Note: Glass Fuses
Socket fuses do not replace the fuses on your board or inline fuses.
Users will typically want to fuse with fast or medium blow fuses on the socket. Determining the correct fuse for a given configuration is beyond the scope of this documentation. The Oznium blog has an excellent guide on choosing a fuse size.
Note: Wiring and Connectors
Additional connectors and wiring may be needed, including for grounding your bed/frame to earth.
"},{"location":"bom/#core-configurations","title":"Core Configurations","text":""},{"location":"bom/#fasteners","title":"Fasteners","text":""},{"location":"bom/#cap-screws","title":"Cap Screws","text":"OmniBox is largely compatible with both M3 socket head cap screws (SHCS) and button head cap screws (BHCS). Core assembly has several recessed screw holes that are not compatible with button head screws; otherwise, button head screws can be used freely in place of socket head screws.
All sourcing links are for SHCS.
Note: PSUs
Power supplies mount using M4 screws.
"},{"location":"bom/#hsi-builds","title":"HSI Builds","text":"Cases with heat set inserts (HSI) use shorter fasteners in many locations.
If using HSIs, an M3 soldering iron tip for heat set inserts is recommended.
"},{"location":"bom/#fastener-bom","title":"Fastener BOM","text":"The lists below are the minimum required for an OmniBox build. The Supported Parts section contains breakdowns of all parts required for every component.
Stock (No HSI)HSIFull HSI Fasteners Qty UOM Note M3 x 6mm machine screws 4 ea M3 x 8mm machine screws 52 ea M3 x 10mm machine screws 6 ea May use 12mm instead. M3 x 12mm machine screws 8 ea M3 x 20mm machine screws 2 ea #6 x 3/4\" sharp point wood screws 8 ea See note below. Fasteners Qty UOM Note Heat Set Insert, M3, 5mm O.D. x 4mm L 24 ea See note below. M3 x 6mm machine screws 24 ea M3 x 8mm machine screws 36 ea M3 x 10mm machine screws 2 ea May use 12mm instead. M3 x 12mm machine screws 8 ea M3 x 20mm machine screws 2 ea #6 x 3/4\" sharp point wood screws 8 ea See note below. Fasteners Qty UOM Note Heat Set Insert, M3, 5mm O.D. x 4mm L 76 ea See note below. M3 x 6mm machine screws 48 ea M3 x 8mm machine screws 20 ea M3 x 10mm machine screws 2 ea May use 12mm instead. M3 x 12mm machine screws 8 ea M3 x 20mm machine screws 2 eaNote: Sharp Point Wood Screws
To substitute #6 x 3/4\" with Metric screws, use M3 x 16mm or M3 x 20mm. Equivalent length machine screws can also be used if sharp point screws are unavailable.
The \"Full HSI\" base versions do not require wood screws.
Heat Set Inserts
Starting with v0.9.10, OmniBox exclusively uses \"Voron-style\" (M3 x 5mm O.D. x 4mm Length) heat set inserts. User-contributed parts that require inserts also use these inserts.
"},{"location":"bom/#power-switch","title":"Power Switch","text":"The Front Base comes in a \"rocker\" or \"toggle\" version.
You will need one of the following:
29mm x 10.5mm SPST snap-in rocker switch
Supports any power supply.
12mm or 12.5mm SPST toggle switch
Supported by smaller power supplies (e.g., Mean Well LRS-350).
"},{"location":"bom/#front-base-fans","title":"Front Base Fans","text":"The base can mount up to three concealed 40mm fans in the intakes. The below are needed to mount each fan:
Item Qty UOM Note 40x40x10mm axial fan 1 ea M3 x 16mm machine screws 4 ea Some fans have recesses that instead use 10-12mm screws."},{"location":"bom/#rear-main-body-fans","title":"Rear Main Body Fans","text":"The rear body has two versions: one with dual fans and one without any.
Quad 40mm FansNo Exhaust FansThis version can mount up to four (4) internal 40mm fans. Unoccupied fan mounts act as vents.
The list below is for each 40mm fan.
Item Qty UOM Note 40x40x10mm axial fans 1 ea M3 x 16mm machine screws 4 eaThere are no additional materials required for this version.
Warning
This rear main body should be used with a rear panel or lid that provides an exhaust fan and/or large vents.
"},{"location":"bom/#tray-and-panel-configurations","title":"Tray and Panel Configurations","text":"The Universal Bill of Materials includes the fasteners needed to mount panels and the the required trays. It does not include the hardware needed to attach electronics to those panels and trays.
The Supported Parts Overview has a full list of parts and mounting locations. Some configurations require additional fasteners or fans.
"},{"location":"bom/#psu-trays","title":"PSU Trays","text":"Power supplies are notable for mounting to the tray with M4 x 6mm cap screws. See the list of supported PSUs for quantities.
Note: M4 Screws
Earlier OmniBox revisions required M4 BHCS. Both socket head and button head are now supported.
"},{"location":"bom/#lower-bay-trays","title":"Lower Bay Trays","text":"Each tray (short or long) uses four (4) M3 x 6mm screws to mount the tray. Additional materials are listed on the Lower Bay Components page.
"},{"location":"bom/#panel-mounted-parts","title":"Panel Mounted Parts","text":"Panel mounts are a way of providing external connectors to internal parts, such as the MCU or CPU board USB ports. The Panel Mounts page discusses this in more detail.
"},{"location":"bom/#microsd-reader-extensions","title":"MicroSD Reader Extensions","text":"Each MCU tray on the MCU support page has a field for whether a short or long MicroSD card reader extension is necessary (if using one for the front panel).
- Short: LANMU MicroSD Card Reader Extension
- Long: ELECTOP MicroSD Card Reader Extension
Enclosed 3D printing requires controlling more hardware than comes with a typical 3D printer:
- Lighting
- Webcam
- Thermistor (temperature sensor)
- Temperature-controlled exhaust fan
- Always-on filtration fan
Most electronics will overheat in the 50C (120F) or higher ambient temperatures of a well-insulated enclosure. I printed my first of Steve Burcham's cases to remove my electronics from such heat; OmniBox is derived from his work.
"},{"location":"development/#flexibility-and-accessibility","title":"Flexibility and Accessibility","text":"Devices like fans and lights--and Raspberry Pis!--need a buck converter lower the voltage from a 3D printer's power supply. My cases soon were cramped with bucks. Each one mounted on a tray above the microcontroller unit (MCU); wiring changes to the MCU required that I first remove up to three buck converter trays.
"},{"location":"development/#ample-room","title":"Ample Room","text":"After I discovered BIGTREETECH's Octopus in another project, I wanted a case for it. The Octopus does not fit the cases I had already printed; I also had several ideas to improve upon Steve's case.
With these requirements and goals in mind, I decided to design my own case.
"},{"location":"development/#early-development-gallery","title":"Early Development Gallery","text":"These photos detail some of the evolution of Steve's original case into OmniBox.
Development Photos The initial main body prototype, looking awkward. Size comparison: Left is an example of Steve's V5 case (with custom panels). On the right is one of the first OmniBoxes during assembly. The first and second finished case bodies, waiting for more panels to finish printing. Testing for fit with all of the connectors in place. Closed up for the first time, front view. Closed up for the first time, rear view."},{"location":"license/","title":"License & Contributing","text":""},{"location":"license/#license","title":"License","text":"OmniBox and its documentation are released under the MIT License. OmniBox is free of charge, but donations are welcome to help offset development costs.
MIT License\n\nCopyright (c) 2022-2023 Jon Harper\n\nPermission is hereby granted, free of charge, to any person obtaining a copy\nof this software and associated documentation files (the \"Software\"), to deal\nin the Software without restriction, including without limitation the rights\nto use, copy, modify, merge, publish, distribute, sublicense, and/or sell\ncopies of the Software, and to permit persons to whom the Software is\nfurnished to do so, subject to the following conditions:\n\nThe above copyright notice and this permission notice shall be included in all\ncopies or substantial portions of the Software.\n\nTHE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\nIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\nFITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\nAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\nLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\nOUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\nSOFTWARE.\nNote: This section is in progress.
Users may contribute directly or indirectly to OmniBox. Accepted contributions are accredited in the documentation.
"},{"location":"license/#direct-contribution","title":"Direct Contribution","text":"Direct contributions to OmniBox are completed through git:
- Fork the OmniBox
unstablebranch. - Add your files in the correct subfolder (e.g. an MCU tray belongs under
/Trays/MCU/[Product Name]). - Submit a pull request to merge your files.
If you would prefer to contribute your changes under a different license or otherwise upload them elsewhere, consider Printables.com. Users who do not contribute directly have (so far) chosen to upload to Printables.
- Upload your file to Printables or another site.
- Open an Issue on GitHub with a link to your file(s).
- If the link does not include installation instructions, include them in the issue.
This page has common settings for printing OmniBox and a printed component checklist. See the guided tour for help choosing the correct parts.
"},{"location":"printing/#recommended-materials","title":"Recommended Materials","text":"Modified PLA
OmniBox prints best with modified PLA, usually called PLA+ or PLA Pro.
Unmodified PLA
Sometimes called Basic PLA, unmodified PLA prints easily but is a rigid and weak material. Unmodified PLA prints at lower temperatures and is usually cheaper than modified PLA. Use modified PLA instead.
PETG
Printing in PETG typically takes longer than PLA but otherwise produces good results.
Note
Fan gaskets are an optional noise reducer and require TPU.
"},{"location":"printing/#3d-print-settings","title":"3D Print Settings","text":"These settings are consistent for all parts except the TPU fan gaskets.
Setting Value Notes Layer Height 0.16-0.25mm Coarser settings have not been tested. Adaptive Layer Height Optional Can improve appearance and reduce print time. Perimeters (Walls) See below Correct value depends on material. Infill 20-25% Cubic is a good tradeoff for time and durability. Nozzle Diameter 0.4mm, 0.6mm If you print a case with a different nozzle size, please share your results! Support Overhang Angle >= 60 degrees This reduces print time & support material."},{"location":"printing/#material-specific-settings","title":"Material-Specific Settings","text":"PLA
Print with 1.2mm or thicker walls (3 perimeters with a 0.4mm nozzle). 1.5mm+ results in solid Main Body side walls.
PETG
Use 1.6mm walls/perimeters (1.8mm for 0.6mm nozzles).
"},{"location":"printing/#support-settings","title":"Support Settings","text":"- Supports must be on for the main body.
- The base may be printed without supports.
- Support blockers are recommended for all zip tie anchors and fastener holes.
- For large parts (e.g., the rear main body) use a brim, adhesive, or both.
- Cantilever bed printers (where the bed is supported by a single Z stepper; e.g., Ender 5 Pro) should move heavier prints to the supported side of the bed.
- If printing in a drafty room, consider a partial enclosure to help layer adhesion.
- Long lids will fit on 220x220mm beds if printed without a skirt or brim.
This is a checklist of types parts to print. See the Guided Tour for help selecting the right STL files from the git repository.
"},{"location":"printing/#core-base","title":"Core: Base","text":"Print a Front Base and a Rear Base. A Unified Base may be printed instead if you have a print bed with least 300mm on one axis.
See the Base section of the Tour for more information.
Front & Rear
Base - Front
Base - Rear
Unified and Unified Extended
Base - Unified
"},{"location":"printing/#core-main-body","title":"Core: Main Body","text":"Print one (1) version of each of the Crossbar, Front Main Body, and Rear Main Body. See the Main Body section of the Tour for help choosing versions to print.
Main Body - Crossbar
Main Body - Front
Main Body - Rear
"},{"location":"printing/#trays","title":"Trays","text":"Component Quantity Required Notes PSU Tray 1 Yes MCU Tray 1 Yes CPU Tray 0-1 No Typically only one (1). Takes the place of a side panel. Lower Bay Trays 0-6 No Type and quantity are specific to configuration."},{"location":"printing/#panels","title":"Panels","text":"Component Quantity Required Notes Display Mount 1 Yes Lid 1-2 Yes One (1) long lid or two (2) short lids. Rear Panel 1 Yes Bottom Panel 1 Yes Side Panel 3-4 Yes Four (4) side panels, minus the number of CPU trays installed."},{"location":"printing/#other-components","title":"Other Components","text":"Component Quantity Required Notes Fan Cages Varies Yes Quantity and type depend on configuration. Fan Gaskets Varies No Optional add-on to fan cages. Power Switch Cover 1 No Recommended cover for rocker switches."},{"location":"sourcing/","title":"Sourcing","text":"This page lists sources for (ideally all) parts used with OmniBox.
"},{"location":"sourcing/#bearings","title":"Bearings","text":""},{"location":"sourcing/#688zz-radial-ball-bearing","title":"688ZZ Radial Ball Bearing","text":"Source Ships To Ships From Note Amazon.com (USA) US US 5 pcs"},{"location":"sourcing/#buck-converter","title":"Buck Converter","text":""},{"location":"sourcing/#basic-lm2596","title":"Basic LM2596","text":"Source Ships To Ships From Note Amazon.com (USA) US US 3 pcs"},{"location":"sourcing/#drok-2a-lm2596-with-led","title":"DROK 2A LM2596 with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#drok-3a-lm2596-with-led","title":"DROK 3A LM2596 with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#drok-5a-buck-with-led","title":"DROK 5A Buck with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#hiletgo-2a-lm2596-with-led","title":"HiLetGo 2A LM2596 with LED","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#connector-extension","title":"Connector Extension","text":""},{"location":"sourcing/#hdmi-keystone-jack","title":"HDMI Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US Coupler only, no cable"},{"location":"sourcing/#microsd-extension-15cm","title":"MicroSD Extension, 15cm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#microsd-extension-48cm","title":"MicroSD Extension, 48cm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#rj45-keystone-jack","title":"RJ45 Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US Coupler only, no cable"},{"location":"sourcing/#rj45-panel-mount","title":"RJ45 Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#usb-2-type-a-panel-mount","title":"USB 2 Type A Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#usb-2-type-b-panel-mount","title":"USB 2 Type B Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-3-dual-panel-mount","title":"USB 3 Dual Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-3-type-a-panel-mount","title":"USB 3 Type A Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#usb-30-keystone-jack","title":"USB 3.0 Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-c-keystone-jack","title":"USB C Keystone Jack","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#usb-c-panel-mount-extension","title":"USB C Panel Mount Extension","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#xt60e-f-female-panel-mount","title":"XT60E-F Female Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2pcs"},{"location":"sourcing/#xt60e-m-male-panel-mount","title":"XT60E-M Male Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2 pcs"},{"location":"sourcing/#cpu","title":"CPU","text":""},{"location":"sourcing/#raspberry-pi-3b-1gb","title":"Raspberry Pi 3B+ 1GB","text":"Source Ships To Ships From Note Digikey Worldwide Worldwide"},{"location":"sourcing/#raspberry-pi-4b-2gb","title":"Raspberry Pi 4B+ 2GB","text":"Source Ships To Ships From Note Digikey Worldwide Worldwide"},{"location":"sourcing/#din-7380","title":"DIN 7380","text":""},{"location":"sourcing/#m3-x-6mm-bhcs","title":"M3 x 6mm BHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-8mm-bhcs","title":"M3 x 8mm BHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#din-912","title":"DIN 912","text":""},{"location":"sourcing/#m25-x-6mm-shcs","title":"M2.5 x 6mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-10mm-shcs","title":"M3 x 10mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-12mm-shcs","title":"M3 x 12mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-14mm-shcs","title":"M3 x 14mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-15mm-shcs","title":"M3 x 15mm SHCS","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-16mm-shcs","title":"M3 x 16mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-18mm-shcs","title":"M3 x 18mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-20mm-shcs","title":"M3 x 20mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-22mm-shcs","title":"M3 x 22mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-25mm-shcs","title":"M3 x 25mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-30mm-shcs","title":"M3 x 30mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-35mm-shcs","title":"M3 x 35mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-40mm-shcs","title":"M3 x 40mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-45mm-shcs","title":"M3 x 45mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-4mm-shcs","title":"M3 x 4mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-50mm-shcs","title":"M3 x 50mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-5mm-shcs","title":"M3 x 5mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m3-x-6mm-shcs","title":"M3 x 6mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-8mm-shcs","title":"M3 x 8mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US"},{"location":"sourcing/#m4-x-10mm-shcs","title":"M4 x 10mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-12mm-shcs","title":"M4 x 12mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-14mm-shcs","title":"M4 x 14mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-16mm-shcs","title":"M4 x 16mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-20mm-shcs","title":"M4 x 20mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-25mm-shcs","title":"M4 x 25mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-30mm-shcs","title":"M4 x 30mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-35mm-shcs","title":"M4 x 35mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-6mm-shcs","title":"M4 x 6mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#m4-x-8mm-shcs","title":"M4 x 8mm SHCS","text":"Source Ships To Ships From Note Bolt Depot US US"},{"location":"sourcing/#display","title":"Display","text":""},{"location":"sourcing/#bigtreetech-35-tft","title":"Bigtreetech 3.5\" TFT","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-35-tft-e3","title":"Bigtreetech 3.5\" TFT E3","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-5-pi-tft","title":"Bigtreetech 5\" Pi TFT","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-hdmi5","title":"Bigtreetech HDMI5","text":"Source Ships To Ships From Note Biqu/Bigtreetech Worldwide CN, US, EU, CA AliExpress Worlwide Worldwide"},{"location":"sourcing/#generic-128x64-display","title":"Generic 128x64 Display","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#mini-12864-display","title":"Mini 12864 Display","text":"Source Ships To Ships From Note Amazon.com (USA) US US FYSETC brand AliExpress Worlwide Worldwide Bigtreetech brand"},{"location":"sourcing/#raspberry-pi-7-tft","title":"Raspberry Pi 7\" TFT","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#electrical-connector","title":"Electrical Connector","text":""},{"location":"sourcing/#iec-c14-socket-with-fuse-holder","title":"IEC C14 Socket with Fuse Holder","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#insulated-fork-connector-8-14-16-awg","title":"Insulated Fork Connector, #8, 14-16 awg","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#insulated-spade-connector-female-14-16-awg","title":"Insulated Spade Connector, Female, 14-16 awg","text":"Source Ships To Ships From Note Amazon.com (USA) US US 100 pcs"},{"location":"sourcing/#jst-sm-kit","title":"JST SM Kit","text":"Source Ships To Ships From Note Amazon.com (USA) US US 2-5 Position"},{"location":"sourcing/#jst-xh-connector-kit","title":"JST XH Connector Kit","text":"Source Ships To Ships From Note KB-3D Worldwide US 2-4 Position Amazon.com (USA) US US 2-6 Position"},{"location":"sourcing/#molex-microfit-30-kit","title":"Molex MicroFit 3.0 Kit","text":"Source Ships To Ships From Note KB-3D Worldwide US 2-4 Position"},{"location":"sourcing/#wago-221-412-2-position-lever-nut","title":"Wago 221-412 2-Position Lever Nut","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#wago-221-413-3-position-lever-nut","title":"Wago 221-413 3-Position Lever Nut","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#wago-221-415-5-position-lever-nut","title":"Wago 221-415 5-Position Lever Nut","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#fan","title":"Fan","text":""},{"location":"sourcing/#120mm-x-25mm-axial-fan","title":"120mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#40mm-x-10mm-axial-fan","title":"40mm x 10mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#40mm-x-20mm-axial-fan","title":"40mm x 20mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#50mm-x-10mm-axial-fan","title":"50mm x 10mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#50mm-x-12mm-axial-fan","title":"50mm x 12mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#50mm-x-15mm-axial-fan","title":"50mm x 15mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#60mm-x-15mm-axial-fan","title":"60mm x 15mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#60mm-x-20mm-axial-fan","title":"60mm x 20mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#60mm-x-25mm-axial-fan","title":"60mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#80mm-x-20mm-axial-fan","title":"80mm x 20mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#80mm-x-25mm-axial-fan","title":"80mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#92mm-x-25mm-axial-fan","title":"92mm x 25mm Axial Fan","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#filament","title":"Filament","text":""},{"location":"sourcing/#petg-filament-1kg","title":"PETG Filament, 1kg","text":"Source Ships To Ships From Note Amazon.com (USA) US US Polymaker PolyLite PETG Atomic Filament US US Atomic Light Gray PETG PRO 3DO.eu EU EU (DK) 3DO PETG 2.0 Matte, Grey"},{"location":"sourcing/#plapla-pro-filament-1kg","title":"PLA+/PLA Pro Filament, 1kg","text":"Source Ships To Ships From Note Amazon.com (USA) US US Polymaker PolyLite PLA Pro Atomic Filament US US Atomic Light Gray PLA v2 3DO.eu EU EU (DK) 3DO PLA 2.0 Tough, Grey"},{"location":"sourcing/#mcu","title":"MCU","text":""},{"location":"sourcing/#bigtreetech-manta-e3-ez","title":"Bigtreetech Manta E3 EZ","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-manta-m5p","title":"Bigtreetech Manta M5P","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide Amazon.com (USA) US US"},{"location":"sourcing/#bigtreetech-manta-m8p","title":"Bigtreetech Manta M8P","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide M8P Version 2.0 Amazon.com (USA) US US"},{"location":"sourcing/#bigtreetech-octopus-series","title":"Bigtreetech Octopus Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-3","title":"Bigtreetech SKR 3","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-3-ez","title":"Bigtreetech SKR 3 EZ","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-e3-series","title":"Bigtreetech SKR E3 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide SKR Mini E3 V3.0"},{"location":"sourcing/#bigtreetech-skr-pico","title":"Bigtreetech SKR Pico","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#bigtreetech-skr-v13-20","title":"Bigtreetech SKR v1.3-2.0","text":"Source Ships To Ships From Note Amazon.com (USA) US US SKR 1.4 Turbo AliExpress Worlwide Worldwide SKR 1.4 Turbo"},{"location":"sourcing/#bigtreetech-skrat","title":"Bigtreetech SKRat","text":"Source Ships To Ships From Note Fabreeko Worldwide US Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#creality-2x-series","title":"Creality 2.x Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#creality-4x-series","title":"Creality 4.x Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#duet3d-duet-3-6hc","title":"Duet3D Duet 3 6HC","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#duet3d-duet-3-mini-5","title":"Duet3D Duet 3 Mini 5+","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#fysetc-spider-series","title":"FYSETC Spider Series","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide"},{"location":"sourcing/#mks-monster8","title":"MKS Monster8","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide"},{"location":"sourcing/#mks-skipr","title":"MKS Skipr","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide"},{"location":"sourcing/#other-electrical","title":"Other Electrical","text":""},{"location":"sourcing/#bigtreetech-relay-12","title":"Bigtreetech Relay 1.2","text":"Source Ships To Ships From Note Biqu/Bigtreetech Worldwide CN, US, EU, CA"},{"location":"sourcing/#bigtreetech-u2c-can-adapter","title":"Bigtreetech U2C CAN Adapter","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#bigtreetech-ups-24v","title":"Bigtreetech UPS 24V","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide Amazon.com (USA) US US"},{"location":"sourcing/#creality-mosfet","title":"Creality MOSFET","text":"Source Ships To Ships From Note Tiny Machines US US"},{"location":"sourcing/#fotek-ssr-40-da","title":"Fotek SSR-40 DA","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#glass-fuse-5mm-x-20mm-fast-blow","title":"Glass Fuse, 5mm x 20mm, Fast Blow","text":"Source Ships To Ships From Note"},{"location":"sourcing/#omron-g3nag3a-solid-state-relay","title":"Omron G3NA/G3A Solid State Relay","text":"Source Ships To Ships From Note KB-3D Worldwide US Digikey Worldwide Worldwide G3NA-210B-UTU-DC5-24"},{"location":"sourcing/#stranded-hookup-wire-16-awg125mm2","title":"Stranded Hookup Wire, 16 awg/1.25mm2","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#other-fasteners","title":"Other Fasteners","text":""},{"location":"sourcing/#6-x-34-wood-screw","title":"#6 x 3/4\" Wood Screw","text":"Note
To substitute #6 x 3/4\" with Metric screws, use M3 x 16mm or M3 x 20mm. Machine screws can also be used, if necessary.
Source Ships To Ships From Note Bolt Depot US US Amazon.com (USA) US US 100 pcs"},{"location":"sourcing/#m25-brass-standoff-femalemale-10mm-6mm","title":"M2.5 Brass Standoff, Female/Male, 10mm + 6mm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#m25-brass-standoff-femalemale-12mm-6mm","title":"M2.5 Brass Standoff, Female/Male, 12mm + 6mm","text":"Source Ships To Ships From Note Amazon.com (USA) US US"},{"location":"sourcing/#m3-x-5mm-od-x-4mm-l-insert","title":"M3 x 5mm OD x 4mm L Insert","text":"Source Ships To Ships From Note Amazon.com (USA) US US 120pk Fabreeko Worldwide US 100pk KB-3D Worldwide US Sold as eaches."},{"location":"sourcing/#psu","title":"PSU","text":""},{"location":"sourcing/#mean-well-lrs-350-series","title":"Mean Well LRS-350 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-lrs-450-series","title":"Mean Well LRS-450 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-lrs-600-series","title":"Mean Well LRS-600 Series","text":"Source Ships To Ships From Note StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-rs-25-5","title":"Mean Well RS-25-5","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-rsp-200-series","title":"Mean Well RSP-200 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US RSP-200-24"},{"location":"sourcing/#mean-well-rsp-500-series","title":"Mean Well RSP-500 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#mean-well-se-450-series","title":"Mean Well SE-450 Series","text":"Source Ships To Ships From Note Amazon.com (USA) US US StepperOnline Worldwide Worldwide Digikey Worldwide Worldwide"},{"location":"sourcing/#switch","title":"Switch","text":""},{"location":"sourcing/#spst-rocker-switch-29mm-x-105mm-panel-mount","title":"SPST Rocker Switch, 29mm x 10.5mm Panel Mount","text":"Source Ships To Ships From Note Amazon.com (USA) US US AliExpress Worlwide Worldwide"},{"location":"sourcing/#spst-toggle-switch-12mm-panel-mount","title":"SPST Toggle Switch, 12mm Panel Mount","text":"Source Ships To Ships From Note AliExpress Worlwide Worldwide Amazon.com (USA) US US"},{"location":"tour/","title":"Guided Tour","text":"This is a visual tour of an OmniBox. This page demonstrates:
- The core parts of OmniBox and their variations;
- Trays and panels; and
- How these pieces fit together.
The configuration in the image above will be our example in this guide. We will start with the Core components and move on to the trays and panels that make OmniBox so modular.
"},{"location":"tour/#links","title":"Links","text":"Links on this site to external resources have prefix icons to identify what they do:
- The git icon is used for download links.
- identifies a link to the Sourcing Guide.
Internal page links in this tour are marked with an arrow sign.
"},{"location":"tour/#heat-set-inserts","title":"Heat Set Inserts","text":"Many OmniBox components come with the option of using heat set inserts to attach other parts. These STL files have names ending in HSI. Files ending with Stock in the name do not need inserts. Look for the icon to quickly identify HSI parts on this site. Part icons are covered in more detail in the Support Overview section.
Core components form the basis of every case. Parts like the MCU do not directly attach to the Core case; instead, user parts are attached to trays and panels, which then mount on the Core case.
The assembled core components of an OmniBox.
There are two (2) types of Core components, the Base and the Main Body. Both of these are typically printed in halves that are then assembled. Users with large (>315mm) beds can print Unified versions of both the Base and Main Body.
The Main Body has a third printed part, the crossbar.
Base
- Front Base
- Rear Base
- Unified Base
Main Body
- Crossbar
- Front Main Body
- Rear Main Body
The Base serves as a cover and mount for the power supply. It helps with wire routing and acts as a foundation for the Main Body.
The Base can be printed in a 36mm or 42mm deep version--this number refers to the depth availabe for the PSU. Look for the :material-
"},{"location":"tour/#main-body","title":"Main Body","text":""},{"location":"tour/#main-body-crossbar","title":"Main Body Crossbar","text":"This is a crossbar that joins and covers the joint between the lids and front display.
This component is available with heat set inserts.
Crossbar Files
"},{"location":"tour/#front-main-body","title":"Front Main Body","text":"The front half of the Main Body mounts the display and front panel.
This component is available with heat set inserts.
Front Main Body Files
"},{"location":"tour/#rear-main-body","title":"Rear Main Body","text":"The rear half of the Main Body is the largest single piece of the case and operates with two levels. The lower level has CPU and lower bay trays. The upper level mounts the MCU.
This component is available with heat set inserts.
Rear Main Body Files
Quad 40mm FansNo Fan MountsThis versions of the rear main body requires either rear panel or lid-mounted fans.
"},{"location":"tour/#trays","title":"Trays","text":"Trays are used for mounting parts internally. There are four (4) types of trays.
Templates are available in both STEP and Fusion 360 formats to add support for new products.
Note
PSU trays are a new feature and do not yet have a template.
The four types of trays in red and blue.
Trays
- PSU Tray
- MCU Tray
- Lower Bay Trays
- CPU Tray
Power supply (PSU) trays slide up from underneath the case.
Large (tall) power supplies require the use of an extended Unified Base or a base extension.
PSU Tray Files
Supported PSUs
"},{"location":"tour/#mcu-tray","title":"MCU Tray","text":"MCU trays mount a microcontroller unit--your 3D printer board. These are
MCU
Supported MCUs
"},{"location":"tour/#lower-bay-trays","title":"Lower Bay Trays","text":"The lower bay is an area to mount parts like buck converters and MOSFETs. There are two dedicated lower bay trays locations and four more that can occupy an unused CPU tray bay.
These trays can be Short or Long. A Long tray covers the mount points of two Short trays and must be mounted from side-to-side in the case.
Lower Bay
Supported Lower Bay Components
"},{"location":"tour/#cpu-tray","title":"CPU Tray","text":"The CPU tray is an optional mount for a Raspberry Pi or other SBC. There are two bays for CPU trays; one is on each side of the case.
An unused bay is replaced by a Side Panel. A short lower bay tray can also be installed in an unused CPU bay.
CPU
Supported SBCs
"},{"location":"tour/#panels","title":"Panels","text":"The six types of panels, visible in grey.General Panels
- Display panel
- Lid
- Bottom panel
Connector Panels
- Front panel
- Rear panel
- Side panel
Panels cover the outside of OmniBox and mount of a range of options. Front, side, and rear panels are typically used for connectors, fans, and ventilation.
There is a blank STEP and Fusion 360 template for each panel category to allow users to create new panels.
The front panel serves as an air vent and location to put a MicroSD card reader extension. USB extensions and RGB LEDs are also common.
Front Panel
Panel Mounts
"},{"location":"tour/#side-panel","title":"Side Panel","text":"A side panel replaces a CPU tray and often mounts connectors or fans. A blank side panel may also be used.
Side Panel
Panel Mounts
"},{"location":"tour/#bottom-panel","title":"Bottom Panel","text":"The bottom panels act as a cover for the underside of the case. A fully enclosed option is available to keep dust out.
Bottom Panel
"},{"location":"tour/#display-panel","title":"Display Panel","text":"This area mounts LCD displays, from the basic 128x64 character display to Raspbery Pi TFTs.
Display
Supported Displays
"},{"location":"tour/#lids","title":"Lid(s)","text":"The lid is both a way into your case and a configurable panel. There are two types of lids: short and long lids. You can either print one (1) long lid or two (2) short lids.
Lid
"},{"location":"tour/#rear-panel","title":"Rear Panel","text":"The rear panel is used for ventilation, passing wiring out of your case, and optionally an additional fan. There are stock configurations available to suit common uses. A template is available for customization.
Rear panels with panel mounted connectors are an active area of work.
Rear Panel
Panel Mounts
"},{"location":"tour/#other-components","title":"Other Components","text":"- Fans
- Base Extensions
- Power Switches
- IEC C14 Power Sockets
Externally mounted fans use fan cages to cover the fan blades. There are a large number of fan sizes supported, each with a matching TPU fan gasket. The gaskets are optional and serve to reduce noise.
40mm fans may also be internally mounted in a number of ways.
Fans
Supported Fans
"},{"location":"tour/#base-extensions","title":"Base Extensions","text":"A base extension shim mounts between the base and the bottom panel and adds 10mm or 13mm of height. This is needed for the RSP-500 and other large PSUs.
This part is not needed if you print the extended Unified Base.
Extension Shim
"},{"location":"tour/#power-switch","title":"Power Switch","text":"OmniBox accepts either a 29mm x 10.5mm snap-in SPST rocker switch or a 12mm toggle switch for power on/off.
Larger power supplies will not fit with a toggle switch. Check the PSU support page for more.
A cover is available for rocker switches to prevent accidental power-off.
Rocker Switch Protector
Rocker SwitchToggle Switch "},{"location":"tour/#iec-c14-power-socket","title":"IEC C14 Power Socket","text":"Power is provided through a standard fused IEC C14 power socket.
"},{"location":"assembly/","title":"Getting Started","text":""},{"location":"assembly/#welcome","title":"Welcome","text":"Welcome to the Assembly Guide for OmniBox. This page covers:
- An overview of what to expect;
- Accounting for differences in configuration from this guide; and
- Best practices during assembly.
TODO
This section has not yet been updated for v0.9.11.
"},{"location":"assembly/base/","title":"Base and PSU","text":"Assembly of the case starts with the Base and PSU Tray.
"},{"location":"assembly/base/#psu-tray","title":"PSU Tray","text":"Overview"},{"location":"assembly/base/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M4 x 6mm machine screws 4 No longer than 8mm. Mean Well LRS-350-24 1 PSU Tray 1 Printed, 2 files. Parts Qty Note M4 x 6mm machine screws 4-8 No longer than 8mm. Compatible power supply 1 PSU Tray 1 Printed, 2 files."},{"location":"assembly/base/#directions","title":"Directions","text":"1. Set the power supply with the terminals are facing downwards and away from you. 2. Place the right PSU tray mount against the right side of the power supply. The printed 'R' should face upwards. 3. Use two (2) M4 screws to attach the tray mount. 4. Set the left tray mount against the opposite side of the power supply. The 'L' should face upwards. 5. Secure using two (2) M4 screws."},{"location":"assembly/base/#reference","title":"Reference","text":""},{"location":"assembly/base/#prepare-the-base","title":"Prepare the Base","text":"Overview"},{"location":"assembly/base/#materials_1","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 8mm machine screws 2 M3 x 16mm machine screws 4 Four per fan. 40mm x 10mm axial fan 1 Optional, up to three. SPST rocker switch 1 IEC C14 socket with fuse holder 1 Fuse, Glass, 5x20mm, Fast Blow 1Base - Front.stl 1 Printed Base - Rear - HSI.stl 1 Printed Parts Qty Note M3 x 8mm machine screws 2 SPST toggle switch 1 IEC C14 socket with fuse holder 1 Fuse, Glass, 5x20mm, Fast Blow 1 Base - Front 1 Printed Base - Rear 1 Printed Note: Unified Base
The unified base replaces both the front and rear bases and requires no additional parts.
"},{"location":"assembly/base/#directions_1","title":"Directions","text":"1. Slide the toggle switch into the open slot on the front base. The flaps on the side compress and snap the switch in place once inserted.Note
The front vents mount up to three fans. In this example we will use one (1).
Repeat the next two (2) steps for any additional fans.
Caution
The fan(s) will press directly against the floor of the main body once it is installed. If the wiring passes upwards through a strain relief notch in the fan case, the wires will be trapped between the fan and case body. Either turn the fan 90 degrees or the remove the wiring from the strain relief notch.
2. Place a 40mm fan against the front vent. Most users will need this as an exhaust.
Note: Airflow Direction
The direction of airflow for most fans is towards base of the motor. Most fans have a sticker on this side of the motor. In this case, the sticker should face towards the vent.
3. Attach the fan with four (4) M3 x 16mm screws.
Important: Screw Lengths
The holes for internally mounted fans are 6mm deep. Screws should never be longer than 16mm for a 40mm x 10mm fan.
If your fan has a counterbore for the screw head, use a 10mm or 12mm screw instead.
Note
The next two steps are necessary if:
- The IEC socket does not have a fuse; or
- The IEC socket has a fuse of the wrong capacity for your configuration.
This guide can help get you started. Consult with a professional if uncertain what capacity fuse you should use.
4. Slide out the fuse holder cover.
5. Insert a fuse into the fuse holder. If necessary, remove the fuse that came with the socket.
6. Replace the cover and slide the power switch socket into the rear of the base.
7. Secure with two (2) M3 x 8mm screws."},{"location":"assembly/base/#reference_1","title":"Reference","text":""},{"location":"assembly/base/#combine-base-and-psu","title":"Combine Base and PSU","text":"Overview"},{"location":"assembly/base/#materials_2","title":"Materials","text":"Parts Qty Note M3 x 12mm machine screws 8"},{"location":"assembly/base/#directions_2","title":"Directions","text":"1. Turn the PSU tray assembly so that the PSU terminals are oriented downards and away from you. 2. Place the base pieces around the PSU tray. The edges should fit together. Note that the power supply terminals are facing downwards. 3. Use eight (8) 12mm M3 screws to attach the base to the PSU tray."},{"location":"assembly/base/#reference_2","title":"Reference","text":""},{"location":"assembly/bottom_lid/","title":"Bottom Panel & Lid","text":"
This is the last section of the build. Here we close up the bottom and top of the case.
"},{"location":"assembly/bottom_lid/#bottom-panel","title":"Bottom Panel","text":"Overview"},{"location":"assembly/bottom_lid/#materials","title":"Materials","text":"Note that builds requiring a base extension will need longer screws.
As IllustratedStock and HSIFull HSIWith Base Extension (All Builds) Parts Qty Note M3 x 8mm machine screws 8 Closed Bottom Panel 1 Printed, two (2) files Parts Qty Note M3 x 8mm machine screws 8 May substitute 10mm or 12mm. Bottom Panel 1 Printed, two (2) files Parts Qty Note M3 x 6mm machine screws 8 Bottom Panel 1 Printed, two (2) files Parts Qty Note M3 x 16mm machine screws 8 Bottom Panel 1 Printed, two (2) files Base Extension 1 Printed, two (2) files"},{"location":"assembly/bottom_lid/#directions","title":"Directions","text":"1. Line up the front bottom panel with the front base. 2. Use four (4) M3 x 8mm screws to attach the panel. 3. Use the same procedure for the rear bottom panel with four (4) more M3 x 8mm screws."},{"location":"assembly/bottom_lid/#reference","title":"Reference","text":""},{"location":"assembly/bottom_lid/#lids","title":"Lid(s)","text":"The example below uses a single, long lid. The procedure for installing two short lids is the same and requires no additional fasteners.
Overview"},{"location":"assembly/bottom_lid/#materials_1","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 8 May substitute longer screws. M3 x 8mm machine screws 2 Long Carry Handle Lid 1 Printed Carry Handle for Lids 1 Printed Parts Qty Note M3 x 8mm machine screws 8 May substitute 10mm or 12mm. Lid 1-2 Printed Parts Qty Note M3 x 6mm machine screws 8 May substitute longer screws. Lid 1-2 Printed
Note
The stock carry handle is illustrated, but there is also a version of the handle for heat set inserts.
"},{"location":"assembly/bottom_lid/#directions_1","title":"Directions","text":"1. Place the handle over the screw holes in the center of the lid. 2. Flip the lid over and fasten the handle in place with two (2) M3 x 8mm screws. 3. Place the assembled lid on top of the case. The lid is reversible. 4. Use eight (8) M3 x 6mm screws to attach the lid."},{"location":"assembly/bottom_lid/#reference_1","title":"Reference","text":""},{"location":"assembly/bottom_lid/#thats-it","title":"That's it!","text":"You completed an OmniBox! Congratulations!
"},{"location":"assembly/core/","title":"Core Assembly","text":"Next we'll add the front and rear halves of the Main Body to the Base.
"},{"location":"assembly/core/#attach-the-main-body","title":"Attach the Main Body","text":"Overview"},{"location":"assembly/core/#materials","title":"Materials","text":"As IllustratedStock and HSIFull HSI Parts Qty Note #6 x 3/4\" sharp point screws 8Main Body - Front - HSI.stl 1 Printed Main Body - Rear - HSI - No Fans.stl 1 Printed Parts Qty Note #6 x 3/4\" sharp point screws 8 Main Body - Front 1 Printed Main Body - Rear 1 Printed Parts Qty Note M3 x 6mm machine screws 8 Main Body - Front - Full HSI.stl 1 Printed Main Body - Rear - Full HSI.stl 1 Printed"},{"location":"assembly/core/#directions","title":"Directions","text":"1. Set the front and rear Main Bodies over the base and the align the edges. 2. Begin inserting #6 screws to the base, tightening about halfway. Before fastening each screw, check that the main body and base are still lined up. 3. Continue fastening screws halfway until all eight (8) are partially inserted. Note: Alignment
If inserting the screws becomes difficult, back out and check:
- That both halves of the main body are still correctly aligned; and
- That the inserted screws are straight and not canted to the side.
4. Check for any alignment problems between the Base and Main Body. When satisfied, finish tightening the screws down completely."},{"location":"assembly/core/#reference","title":"Reference","text":""},{"location":"assembly/core/#join-the-main-body","title":"Join the Main Body","text":"Overview"},{"location":"assembly/core/#materials_1","title":"Materials","text":"Stock and HSIFull HSI Parts Qty Note M3 x 8mm machine screws 6 Can use 10mm screws instead. Parts Qty Note M3 x 6mm machine screws 6"},{"location":"assembly/core/#directions_1","title":"Directions","text":"1. Insert an M3 x 8mm screw in the top hole on one side of the rear Main Body. Fasten it to the mating hole on the front Main Body. 2. Repeat with the top hole on the other side of the Main Body, again fastening from back to front. 3. Use two (2) more M3 screws to fill in the remaining screw holes on one side. 4. Repeat with the final two (2) screw holes on the opposite side."},{"location":"assembly/core/#reference_1","title":"Reference","text":""},{"location":"assembly/core/#attach-the-crossbar","title":"Attach the Crossbar","text":"Overview"},{"location":"assembly/core/#materials_2","title":"Materials","text":"Parts Qty Note M3 x 20mm machine screws 2 Main Body - Crossbar 1 Printed"},{"location":"assembly/core/#directions_2","title":"Directions","text":"1. Hold the crossbar between the screw holes at the top of the front main body. Note that the lip should face forward. 2. Fasten the crossbar in place with two (2) M3 x 20mm screws. Tightness can be adjusted to help square the sides of the case body."},{"location":"assembly/core/#reference_2","title":"Reference","text":""},{"location":"assembly/cpu/","title":"CPU","text":"
This section is optional. If you are not using a SoC CPU like a Raspberry Pi, use a fourth side panel in the next assembly section.
"},{"location":"assembly/cpu/#overview","title":"Overview","text":""},{"location":"assembly/cpu/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 4 M3 x 8mm machine screws 4 May substitute 10mm or 12mm. M3 x 15mm machine screws 4 May substitute 16mm. Raspberry Pi 4B 1 40mm x 10mm Axial Fan 1 Assembled SPI cable 1 Universal Raspberry Pi CPU Tray 1 Printed Parts Qty Note M3 x 8mm machine screws 4 May substitute 10mm or 12mm. M3 x 6mm machine screws N/A Most SoC CPUs use four (4). Compatible SoC CPU 1 CPU Tray 1 PrintedWarning: M3 x 16mm screws
If using M3 x 16mm screws for the 40mm fan, do not overtighten or you may deform the outer panel surface.
Note: SPI cable
The illustrated CPU tray has a cutout for a 2 Row, 6-position Molex Micro Fit 3 connector. This cutout can be wired to connect devices to the SoC CPU, such as an accelerometer.
Assembling and wiring this cable is beyond the scope of this guide, but the cable can be made from DuPont-terminated breadboard wires.
"},{"location":"assembly/cpu/#directions","title":"Directions","text":"1. Orient the 40mm fan and fasten with four (4) M3 x 15mm screws. If substituting with 16mm screws *do not overtighten. 2. Place the Raspberry Pi on the tray. The headers should face away from the fan. 3. Fasten with four (4) M3 x 6mm screws. The holes are for M2.5 screws but will bore out easily for M3 screws. 4. (Not pictured) Connect the SPI cable to the Raspberry Pi GPIO headers. Double-check that the cable pins mate to correct the headers. 5. Snap the Micro Fit 3 connector into the CPU tray panel. 6. Slide the CPU into the case. In this example, we use the front right CPU bay. 7. Secure with four (4) M3 x 8mm screws."},{"location":"assembly/cpu/#reference","title":"Reference","text":""},{"location":"assembly/display/","title":"Display Panel","text":"This section covers assembling a generic 12864 display panel, like the kind commonly found on older Creality Ender-series printers.
Common aftermarket TFT displays have an extra step of mounting the display to a cover. The cover then attaches to the panel. Other than this, the installation process remains the same.
"},{"location":"assembly/display/#overview","title":"Overview","text":""},{"location":"assembly/display/#materials","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 4 M3 x 8mm machine screws 4 May substitute 10mm or 12mm. Generic 12864 LCD 1 Comes with many Creality printers.Display Panel - Generic 12864.stl 1 Printed Display Knob 1 Printed, Optional Parts Qty Note M3 x 10mm machine screws 4 May also use 12mm. Compatible LCD display 1 Display Panel 1 Printed Display Knob 1 Printed, Optional Parts Qty Note M3 x 8mm machine screws 4 Compatible LCD display 1 Display Panel 1 Printed Display Knob 1 Printed, Optional Note
Only the fasteners required to mount the printed panel to the case are listed in the Stock and HSI materials.
"},{"location":"assembly/display/#directions","title":"Directions","text":"1. Remove the display knob. It should come off with light force. 2. Fit the LCD into the display panel. 3. If you have a printed knob, push it back in place of the original. Otherwise, push the original knob back. 4. Attach the LCD to the panel with four (4) M4 x 6mm screws. 5. Set the assembly into the display mount on the front main body. 6. Attach the display with four (4) M4 x 8mm screws."},{"location":"assembly/display/#reference","title":"Reference","text":""},{"location":"assembly/front/","title":"Front Panel","text":""},{"location":"assembly/front/#overview","title":"Overview","text":""},{"location":"assembly/front/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 4 M3 x 10mm machine screws 2 May substitute 12mm.Front Panel - MicroSD, Slats.stl 1 Printed LANMU MicroSD Holder Body.stl 1 Printed LANMU MicroSD Holder Cap.stl 1 Printed ELECTOP MicroSD Reader Extension 1 See note. Note: MicroSD Reader Extension
Each MCU tray entry notes if the part requires a short (6\" LANMU) or long (18\" ELECTOP) reader extension. The illustrated SKR 2 requires a long extension.
The assembly process for both lengths of SD reader extension is the same.
Parts Qty Note M3 x 10mm machine screws 2 May substitute 12mm. Front Panel 1 PrintedNote: LED Backing Panel
If you are using the LED backer, substitute M3 x 12mm for the two (2) M3 x 10mm screws.
"},{"location":"assembly/front/#directions","title":"Directions","text":"1. Carefully pry open the outer plastic shell around the MicroSD card reader extension. Discard the shell. 2. (Not pictured) Place the MicroSD extension PCB in the holder body. The ribbon cable should be flush with the lip on the back of the holder. 3. Place the holder cap on top of the extension and holder body. 4. Use two M3 x 6mm screws to fasten the cap in place. 5. Slot the assembly into the front panel and secure with two (2) M3 x 6mm screws. Vertical orientation does not matter. 6. Push the front panel into place on the case body. Slip the SD card extension cable through first. 7. Attach the panel with two (2) M3 x 10mm screws."},{"location":"assembly/front/#reference","title":"Reference","text":""},{"location":"assembly/hsi_locations/","title":"Insert Locations","text":"This page contains a map of where heat set inserts should be installed for both a regular and Full HSI build.
"},{"location":"assembly/hsi_locations/#front-main-body","title":"Front Main Body","text":""},{"location":"assembly/hsi_locations/#standard","title":"Standard","text":"This part requires eight (8) total inserts.
Four (4) inserts
Four (4) inserts"},{"location":"assembly/hsi_locations/#full-hsi","title":"Full HSI","text":"
Full HSI adds ten (10) additional inserts.
Two (2) inserts
Eight (8) inserts"},{"location":"assembly/hsi_locations/#rear-main-body","title":"Rear Main Body","text":""},{"location":"assembly/hsi_locations/#standard_1","title":"Standard","text":"
This part requires fourteen (14) inserts.
Eight (8) inserts
Six (6) inserts"},{"location":"assembly/hsi_locations/#full-hsi_1","title":"Full HSI","text":"
Full HSI adds sixteen (16) additional inserts.
Sixteen (16) inserts"},{"location":"assembly/hsi_locations/#front-base","title":"Front Base","text":""},{"location":"assembly/hsi_locations/#standard_2","title":"Standard","text":"
This part does not have inserts in a standard HSI build.
"},{"location":"assembly/hsi_locations/#full-hsi_2","title":"Full HSI","text":"Full HSI uses eight (8) for this part.
Eight (8) inserts"},{"location":"assembly/hsi_locations/#rear-base","title":"Rear Base","text":""},{"location":"assembly/hsi_locations/#standard_3","title":"Standard","text":"
The standard HSI build uses two (2) inserts.
Two (2) inserts"},{"location":"assembly/hsi_locations/#full-hsi_3","title":"Full HSI","text":"
Full HSI adds ten (10) additional inserts.
Two (2) inserts
Eight (8) inserts"},{"location":"assembly/hsi_steps/","title":"Insertion Steps","text":"
The front of the Main Body has eight (8) inserts, with four (4) canted at an angle for the display. These canted inserts are unique for the case, so we'll use the front as an example on how to install inserts.
These instructions are for the standard HSI Front Main Body (not the Full HSI version).
Note
The display screen is at a 50 degree angle, not 45. The practice block has six holes at this angle for practice purposes.
It is important that the inserts are flush with the display surface.
"},{"location":"assembly/hsi_steps/#materials","title":"Materials","text":"Parts Qty Note Heat set inserts, M3, 4.5x5.7mm 8Main Body - Front - HSI.stl 1 Printed"},{"location":"assembly/hsi_steps/#directions","title":"Directions","text":"1. Using four (4) inserts, place one in each of the two (2) lid holes and two (2) MCU tray holes. 2. Heat and set the inserts. 3. Turn the front body so that the four display panel mounting holes face you. Place inserts in each hole. 4. Carefully set the inserts, checking that the inserts finish flush with the surrounding plastic."},{"location":"assembly/hsi_steps/#reference","title":"Reference","text":""},{"location":"assembly/hsi_tips/","title":"HSI Introduction & Tips","text":""},{"location":"assembly/hsi_tips/#time","title":"Time","text":"Installation time varies by experience; typically this is between 15 to 45 minutes. The \"Full HSI\" build has significantly more inserts than the regular HSI build and requires additional time.
"},{"location":"assembly/hsi_tips/#additional-materials","title":"Additional Materials","text":"- Soldering iron
- M3 heat set insert tip for soldering irons
- Fine tweezers
If you are using inserts for the first time, print at least one practice block. Experience with inserts saves time and lowers the chances of printed part damage.
These blocks have holes in two orientations: flat and set at a 50 degree angle. The holes are identical in shape to those used in the case. Practice putting inserts in both types of holes until comfortable with the procedure.
"},{"location":"assembly/hsi_tips/#procedure","title":"Procedure","text":""},{"location":"assembly/hsi_tips/#setup","title":"Setup","text":"- Install the M3 insert tip on your soldering iron.
- Pre-heat the iron to a low temperature (200C is fine for both PLA and PETG).
- Allow enough time for your iron to heat up. A 40W iron may need two minutes.
Note
These inserts have a rounded lip on one side. This end \"sits\" in the hole and maintains alignment with the hole during heating and insertion.
Tip
The insert holes have a slight inward slope. Resistance will gradually increase as the insert slides in place. Resistance greatly increases when the insert deviates from the hole.
Caution
Installing an insert leaves both the insert and surrounding plastic hot for several minutes.
Avoid touching areas of the case around an insert until it has cooled.
- Pre-set an insert into the hole using your fingers or needle-nosed pliers. It drop in until it reaches the first set of knurles (or pop in place with some pressure).
- Place the tip of the soldering iron on the insert. Do not apply pressure yet.
- As the insert heats, it will soften the plastic around it. Apply gentle pressure with the iron.
- Let the shape of the hole guide the insert.
- Once the insert is flush or slightly below the surface, remove the iron.
- Check if the insert is off-center by looking for gaps around the edges. The plastic should be evenly melted around the insert.
- If the insert needs adjustment, gently use fine tweezers or an M3 x 20mm screw to straighten it (while still hot). See below if the insert cools.
Sometimes an off-center insert is not discovered until later. The most common symptom is a squealing noise when inserting screws. If this happens, back out the screw and try again; the screw may be threading at an angle. If this does not correct the issue, stop assembly to fix the insert.
Note
These instructions are still being fine-tuned.
- Preheat the soldering iron to a low temperature.
- Set the iron's tip on the insert, but do not press down.
- Allow three (3) to five (5) seconds for the insert to heat.
- Take an M3 x 20mm or longer machine screw and thread one (1) or two (2) turns into the insert.
- Use the screw to straighten the insert before the plastic cools around it.
Lower bay trays can be mounted in one of six (6) locations for short trays and one of three (3) locations for long trays. This flexibility is useful when planning ahead (e.g., a buck converter can be located near the device it powers for shorter wiring).
"},{"location":"assembly/lower_bay/#long-trays","title":"Long Trays","text":"Long trays can be mounted in the front, middle, or back of the lower bay. They can only be mounted with the long side oriented sideways.
"},{"location":"assembly/lower_bay/#materials","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 8 Wago 221-413 Lever Nuts 4Lower Bay Tray - Wago Nuts - 8x3P.stl 1 Printed Parts Qty Note M3 x 6mm machine screws 4 Compatible hardware 1 Long Lower Bay Tray 1 Printed Only screws for mounting the tray are specified in the generic materials list.
"},{"location":"assembly/lower_bay/#directions","title":"Directions","text":"1. Snap the Wago connectors in place. We leave half of the tray unoccupied for future expansion. 2. Determine the best location for the tray. Here, it is set in the center to shorten wiring. 3. Secure with four (4) M4 x 6mm screws."},{"location":"assembly/lower_bay/#short-trays","title":"Short Trays","text":"Short trays can be mounted in any one of six (6) locations in the lower bay. Short trays do not always fit next to an occupied CPU bay.
"},{"location":"assembly/lower_bay/#materials_1","title":"Materials","text":"As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 6 LM2596 Buck Converter 1Lower Bay Tray - Generic LM2596 - Short Single Tray.stl 1 Printed Parts Qty Note M3 x 6mm machine screws 4 Compatible hardware 1 Short Lower Bay Tray 1 Printed Only screws for mounting the tray are specified in the generic materials list.
"},{"location":"assembly/lower_bay/#directions_1","title":"Directions","text":"1. Set the buck converter on the tray's standoffs and secure with four (4) M4 x 6mm screws. It is a good idea to ensure the converter's voltage level is set at this point. 2. Determine the best location for the tray in the lower bay. In this case, the tray will not fit next to the Raspberry Pi, so it is placed in the back. 3. Secure the tray to the case with four (4) M4 x 6mm screws."},{"location":"assembly/lower_bay/#reference","title":"Reference","text":""},{"location":"assembly/mcu/","title":"MCU Tray","text":""},{"location":"assembly/mcu/#mcu-installation","title":"MCU Installation","text":""},{"location":"assembly/mcu/#overview","title":"Overview","text":""},{"location":"assembly/mcu/#materials","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 8 BIGTREETECH SKR 2 1 MCU Tray - BTT SKR 1.3-2 1 Printed Parts Qty Note M3 x 6mm machine screws 4 Some boards may use 5 or more. M3 x 8mm machine screws 4 Compatible MCU 1 MCU Tray 1 Printed Parts Qty Note M3 x 6mm machine screws 8 Some boards may use 5 or more. Compatible MCU 1 MCU Tray 1 Printed"},{"location":"assembly/mcu/#directions","title":"Directions","text":"1. Place your MCU on the tray and align the mounting holes.Important
Larger trays (e.g. BIGTREETECH Octopus series or the Manta M8P) will only fit in the case if the board is oriented one way, as the trays are not symmetrical. Check which direction fits in the case before securing the MCU to the tray.
2. Use four (4) 6mm screws to secure the MCU.
3. Set the MCU tray on the pillars in the case. The board's power connectors should orient to the back of the case or to the side.
4. Fasten the tray with four (4) M3 x 6mm screws."},{"location":"assembly/mcu/#reference","title":"Reference","text":""},{"location":"assembly/psu_wiring/","title":"PSU Wiring","text":"
At this point, it is a good idea to wire the power supply, power switch, and power socket. The large hole in the right PSU tray mount allows wiring to pass through from the power switch. There are zip tie anchors available in the sides to secure the power switch wiring.
"},{"location":"assembly/psu_wiring/#considerations","title":"Considerations","text":""},{"location":"assembly/psu_wiring/#cautions","title":"Cautions","text":"Important
For this example, we will use red wires for the power switch and use them for the live leg from the power socket to switch to PSU (normally labeled 'L' on the PSU).
It is strongly recommended that the switch operate on the live wire instead of the neutral.
Warning
Be careful of polarity and always check your work!
"},{"location":"assembly/psu_wiring/#limitations","title":"Limitations","text":"Warning
- This guide is not meant to be a complete manual for wiring.
- I am not liable for any damage or injury that may result.
- The Overview video in this section is limited to connecting the prepared wiring.
- This section of the guide does not cover all possible scenarios.
- IEC sockets typically ship with short wires with pre-crimped connectors.
- If yours is not pre-wired, you will need two additional wires for the other poles of the IEC socket.
- Preparing and installing these wires is beyond the scope of this guide.
In this section you will need to crimp closed barrel connectors. If you have never performed crimping before, it is strongly recommended that you practice before proceeding.
Cablecraft has an excellent, in-depth guide to crimping common terminal types.
"},{"location":"assembly/psu_wiring/#wiring-the-psu","title":"Wiring the PSU","text":""},{"location":"assembly/psu_wiring/#overview","title":"Overview","text":""},{"location":"assembly/psu_wiring/#materials","title":"Materials","text":"Parts Qty Note 16awg/1.5mm2 red stranded hookup wire 0.7m 14 or 16 gauge (1.5mm2 - 2.5mm2) Fork connectors, 14-16 awg, female insulated 1 Spade connectors, 14-16 awg, insulated 3"},{"location":"assembly/psu_wiring/#preparing-materials","title":"Preparing Materials","text":"Note
When crimping closed barrel connectors, the bare wire should extend no more than 1mm from the end of the crimp.
- Cut one (1) length of hookup wire approximately 30cm (12\") long and strip the ends.
- Crimp a spade terminal on each end and set the wire aside.
- Cut one (1) length of wire approximately 37cm (15\") long and strip the ends.
- Crimp a spade terminal on one end.
- Crimp a fork connector on the other end.
The prepared wires should look roughly like the above."},{"location":"assembly/psu_wiring/#directions","title":"Directions","text":"1. Remove the red wire from the IEC socket's live (L) terminal. Note that this view is from the bottom up; the live (L) wire is the red wire on bottom. 2. Attach one end of the wire with two spade connectors to the socket's live (L) terminal. 3. Run the wire through the PSU tray's wiring hole and attach it to either terminal on the power switch. 4. Attach the spade connector on the remaining wire to the remaining free switch terminal. 5. Run the wire back through the PSU tray's wiring hole and secure the fork terminal to the PSU's live (L) AC terminal. 6. Connect the remaining IEC socket connectors to the PSU: neutral and protective earth/ground (often yellow or green)."},{"location":"assembly/psu_wiring/#reference","title":"Reference","text":""},{"location":"assembly/rear/","title":"Rear Panel and Wiring","text":"
We are close to completion, so the rear panel and MCU wiring are next.
"},{"location":"assembly/rear/#rear-panel","title":"Rear Panel","text":""},{"location":"assembly/rear/#overview","title":"Overview","text":""},{"location":"assembly/rear/#materials","title":"Materials","text":"As IllustratedStockHSI Parts Qty Note M3 x 6mm machine screws 8 M3 x 25mm machine screws 4 60mm x 15mm axial fan 1Generic No USB with Fan.stl 1 Printed 6015 Fan Cage.stl 1 Printed 6015 Fan Gasket.stl 1 Printed TPU, optional Parts Qty Note M3 x 8mm machine screws 8 May substitute 10mm or 12mm. Rear Panel 1 Printed Parts Qty Note M3 x 6mm machine screws 8 Rear Panel 1 Printed"},{"location":"assembly/rear/#directions","title":"Directions","text":"1. Put the fan, cage, and gasket together as shown. 1. Push the fan's wiring through the cutout at the bottom. Fasten the fan cage assembly in place with four (4) M3 x 30mm screws. 1. Fit the rear panel against the back of the case. 1. Fasten in place using eight (8) M3 screws."},{"location":"assembly/rear/#reference","title":"Reference","text":""},{"location":"assembly/rear/#mcu-wiring","title":"MCU Wiring","text":"Before we install the display and lid, complete all remaining wiring for the MCU and any other components. The possible combinations of MCUs and printers (and their types of wiring harnesses!) are too large to fit this guide. Below are tips and links to other resources. This section will grow with time.
"},{"location":"assembly/rear/#safety","title":"Safety","text":"- Double-check your work.
- Be prepared to cut power instantly during both power on and testing the printer.
- Consider safing your printer against ground faults!
- Grounding to earth protects in case of a number of issues, e.g., a short in the bed touching the frame.
- This is very important for AC-powered beds.
- Connect your frame to the AC ground (usually a yellow or green wire, not the black neutral wire).
- Do not assume your power supply case is safely earthed\u2014test with a multimeter.
- TH3D has a page with helpful videos on the subject.
- Double-check your work as you go.
- Label connectors with where they attach to the MCU board for easy removal and reconnection later (e.g.,
TBfor the bed thermistor header). - Check connector pins:
- Many connector pins are not designed for frequent removal: wires may pull free from the pin or pin from the connector.
- Pin can become damaged or come loose during removal.
- JST XH connectors are particularly prone to pin issues (usually used for fans, thermistors, and endstops).
- Zip tie anchors:
- The zip tie anchors in the sides of the case are helpful for securing longer wires.
- If you are crimping your own wires, extra length can be used to keep the wiring clean.
Before Continuing
It is a good idea to perform initial power on tests now.
"},{"location":"assembly/side/","title":"Side Panel(s)","text":"Each case has four (4) locations for a side panel. If you have an SoC CPU, one side panel is already occupied by the CPU tray. In this case, you will instead need three (3) side panels.
"},{"location":"assembly/side/#overview","title":"Overview","text":""},{"location":"assembly/side/#materials","title":"Materials","text":"These lists assume three (3) side panels are needed.
As IllustratedGeneric Parts Qty Note M3 x 6mm machine screws 6 M3 x 8mm machine screws 12 May substitute 10mm or 12mm. M3 x 15mm machine screws 4 May substitute 16mm. 40mm x 10mm Axial Fan 1 RJ-45 Extension (panel mount) 1 USB Extension (panel mount) 2Side Panel - Internal 40mm Fan - OmniBox Logo.stl 1 Printed Side Panel - RJ-45 & Dual USB.stl 1 Printed Side Panel - Blank.stl 1 Printed Parts Qty Note M3 x 8mm machine screws 12 May substitute 10mm or 12mm. Side Panel 3 Printed"},{"location":"assembly/side/#directions","title":"Directions","text":"1. Use four (4) 15mm screws to attach the 40mm fan to the Internal 40mm Fan side panel. Here the fan is used as an intake. 2. Place the assembled side panel against the case body. Note that the top and bottom screw holes are not symmetrical. This fan will act as a second intake in the front, opposite the one on the Raspberry Pi. 3. Fasten with four (4) M3 screws at least 8mm long. 4. The next side panel is for RJ-45 and USB panel mounted extensions. First determine the correct orientation for the RJ-45 socket. 5. Secure with two 6mm screws. 6. The USB connectors do not have a fixed orientation. The USB connector will insert slightly into the panel mount. Secure the extensions with 6mm screws. 7. Slide the panel in place and fasten with four (4) 8mm screws. 8. Attach the remaining (blank) panel with the remaining four (4) 8mm screws."},{"location":"assembly/side/#reference","title":"Reference","text":""},{"location":"history/","title":"0.9.11 Release","text":"The current beta release is 0.9.11. No release date has been set yet.
"},{"location":"history/#new-features","title":"New Features","text":""},{"location":"history/#major-new-features","title":"Major New Features","text":"- Available with built-in supports;
- Taller side panels, now 58mm;
- Reduced visibility of seams;
- Base available in two heights & a shorter standard base height;
- Many new base variations & combinations;
- All versions of the Base and Main Body are available as Front/Rear or Unified; and
- Built-in mounts for 3-position Wago 221 connectors.
- Smoother external lines;
- Better printability with basic PLA;
- Increased functional room for PSU by inverting IEC socket;
- Raised MCU tray mounting height; and
- Better rocker switch snap-in.
- Issue #118: Move PSU Tray mounts forward
- Issue #55: E5+ Monolithic main body
- Issue #117: IEC socket can be inverted in the base
- Documentation site
- Better tab styling
- Supported Hardware is now Options & Support
- Options & Support section is generated from a single file, simplifying updates.
- Upgrade guide is simpler and clearer.
- Repository
- Migrating to versioned panel and tray subfolders.
An OmniBox with external 50mm fan and keystone jack extensions.
Front view of a completed OmniBox with power switch cover and rear-mounted 60mm fan.
The new Mean Well bottom panel allows the PSU to exhaust directly out of the case.
Everything but the panels, ready to assemble the Core case.Photo courtesy matrixsenpai.
A freshly-printed PETG Rear Main Body.Photo courtesy matrixsenpai.
"},{"location":"history/v0.9.10/","title":"0.9.10 Release","text":"The current stable release is 0.9.10, released on 2023-07-31.
"},{"location":"history/v0.9.10/#new-features","title":"New Features","text":""},{"location":"history/v0.9.10/#major-new-features","title":"Major New Features","text":"- Added two (2) new CPU bays for a total of four (4).
- Heat set insert support changed to M3 x 5mm (OD) x 4mm (L) (Voron-style).
- Front base support for toggle switches.
- Rear main body with two (2) external fans replaced by a four (4) interal mounts.
- \"Full HSI\" case option with most fasteners mating with an insert.
- Improved: Crossbar version added with HSI support, better zip tie anchors.
- Improved: Long lower bay trays now mount sideways, one additional tray available.
- Improved: New bottom panel template and panel options.
- Added: Additional zip tie anchors, particularly to the front main body.
- Improved: CPU tray guides take up significantly less room.
- New: Support for 12mm and 12.5mm toggle switches.
- New: MCU trays with mounts for dual MCUs.
- New: Slide-out storage for the CPU bay.
- Improved: Rear panel template now provides support for the lid.
- Improved: Display panel template now fits betters and prints with less material.
- Issue #91: Display template is faulty
- Issue #81: Lower bay tray standoffs need a fillet
- Issue #59: Micro Fit 3 pinouts for rear panels are missing
- Issue #94: Add a power switch cover to prevent accidental bumping
- Issue #114: Lower bay standoffs should be tapered
- Issue #111: Videos should not auto-download
- Issue #102: Template should have a version code
- Issue #62: Panel mounted connectors template is out of date
- Documentation site
- Added contribution information.
- Cleaned up wording on introductory pages.
- All fixed BOM parts have example links.
- Added a simple upgrading guide and templates page.
- Simplified HSI assembly section.
- Repository
- Some file names have additional qualifiers where multiple variations now exist, e.g. \"stock\" vs. \"HSI\".
- Fixed a number of stable files that were never copied or updated from
unstable.
An OmniBox with external 50mm fan and keystone jack extensions.
Front view of a completed OmniBox with power switch cover and rear-mounted 60mm fan.
The new Mean Well bottom panel allows the PSU to exhaust directly out of the case.
Everything but the panels, ready to assemble the Core case.Photo courtesy matrixsenpai.
A freshly-printed PETG Rear Main Body.Photo courtesy matrixsenpai.
"},{"location":"history/v0.9.5/","title":"0.9.5 Release","text":"This is a past release of OmniBox, originally released on 2022-06-03.
"},{"location":"history/v0.9.5/#fixes","title":"Fixes","text":"- Issue #1 is fixed and the lids should be reversible now.
- The rear body fan mounts are rotated 45 degrees for an easier print.
- Print time and material should be slightly reduced on the rear body due to minor changes to the tray holder.
- All display mounts now have source files.
- SKR Mini E3 boards have preliminary support (included for the sake of completeness, but untested).
- No issues are currently outstanding as of this release.
This is a past release of OmniBox. It was released on July 22, 2022.
"},{"location":"history/v0.9.7/#fixes","title":"Fixes","text":"- IEC power socket is now built into the rear base (it doesn't have to be disconnected when removing the rear panel).
- Display screen mounting hole locations are fixed.
- TPU gaskets are much improved.
- Lid screw locations are now symmetric.
- Addition of rear main body with no fan holes (for use when using a larger fan on the rear panel or lid).
- Version of front main body with 60mm fan intake instead of vent holes.
- Request Fill SKR E3 Mini and Turbo support
- Request Fill 6 combinations of \"Generic\" rear panels with wire passthru holes instead of panel mounts
- Request Fill New fan cages for 6 fan sizes with more to come.
- New template Fusion file for making panel mounted rear panels
- Molex Micro Fit 3 connector profiles
- USB A, RJ-45, and other new panel mount extension profiles
- Mounts for another variety of buck converter (compact footprint with LED, commonly sold by HiLetgo on Amazon)
- Blank CPU port cover for Marlin and RRF users (i.e., no Raspberry Pi)
- File structure improved; most parts have a folder containing
STL,STEP, and Fusion file (when available). - Fan Cages now have a top-level folder
- Supported features documentation broken out by category and updated
- Guide to rear panels simplified
Version 0.9.8.1 was released on 2022-09-15.
"},{"location":"history/v0.9.8.1/#core","title":"Core","text":"- Print time and material usage is slightly reduced for the front and rear base components.
- Lid for filament spools added.
- An adaptation of my Tighter T.U.S.H. spool holder (a remix of the original T.U.S.H.).
- It mounts on a lid that integrates the spool holder guide.
- The guide makes the spool holder adjustable to spool width (up to about 120mm).
- Lid for dryboxes added.
- Fitted for Rubbermaid 21 cup container used as a 1kg spool drybox.
- These containers are about $10 each at Ace Hardware. They are more expensive on Amazon.
- There are often clones of these on Amazon that are similarly priced (about $8-10 ea).
- May have lids for other containers in the near future as a user contribution.
- Raspberry Pi CPU trays have a version with a 6-pin Micro Fit 3 panel mount cutout.
- Allow using an ADXL345 accelerometer via SPI.
- Cutout is on the tray to give shortest wiring run possible.
These parts still need to be tested for fit and other issues.
Hardware Mount Location(s) Notes Mean Well RSP-500 power supply Main body For the Ender 5 Plus 92mm fans Rear panel, lid 25mm thickness; no compatible mount yet."},{"location":"history/v0.9.8.1/#new-hardware-support","title":"New Hardware Support","text":"This hardware is now fit-tested as working.
Hardware Mount Location(s) Notes Fotek SSR-60 DA solid state relay Lower bay Raspberry Pi TFTs Display mount or half-lid See below.Note: Smaller TFTs (e.g., BigTreeTech's 5\" PiTFT) will fit on the standard half-lid. Use the \"XL\" STL file for the official 7\" and similarly large TFTs.
"},{"location":"history/v0.9.8.1/#documentation-repository","title":"Documentation & Repository","text":"- Documentation site
- Modified color scheme and fonts for readability.
- Added new dark color theme.
- Implemented several Material for Mkdocs features, including icons to help with part identification.
- Improved site navigation.
- Repository
- Reorganized lids folder into \"Full-Length\" and \"Half-Lenth\" subfolders.
- Added more readme.md files for folders.
- The front main body with a 40mm intake fan partially obscures a mounting hole for the base to the main body. This leave seven (7) other mount points and is not a significant issue. The hole can safely be left empty.
Version 0.9.8 was released on 2022-08-18.
"},{"location":"history/v0.9.8/#fixes","title":"Fixes","text":"- Button head screws work for the crossbar.
- Clarified 6mm/8mm screws for power supplies.
- Documentation greatly improved for newcomers.
- Fan cages provide much more airflow, print more quickly, and use less material.
Other:
- New rear panel for the Ender 5 Plus with an 80mm fan.
- New front vents for the base and larger side vents.
- Two new optional 40mm fans concealed in the intakes.
- MCU trays can be removed without removing the rear panel.
- Fan cages have a parametric template.
- New half-length lids.
- New half-length lower bay trays.
- Lower bay trays for buck converters and simple, 4-point mounts are now Fusion 360 templates.
- New trays can be added by modifying the Fusion template and exporting the results.
- The template includes mounts with fans and the new half-length size.
- Broke out product support documentation across three pages. Each product includes images and mounting hardware.
- Divided assembly documentation into three sections and added info for Core variants.
- Improved/better overall folder structure; all panel and tray variations have a separate folder.
- Most git folders now have a
readme.mdto help with navigation and part selection.
- The front main body with a 40mm intake fan partially obscures a mounting hole for the base to the main body. This leave seven (7) other mount points and is not a significant issue. The hole can safely be left empty.
Version 0.9.9 was released on 2022-11-26.
"},{"location":"history/v0.9.9/#new-features","title":"New Features","text":""},{"location":"history/v0.9.9/#major-new-features","title":"Major New Features","text":"- Base: Issue #14: Universal power supply mount
- Attaches to the base instead of main body.
- PSU slides in from underneath.
- Allows replacing the PSU without removing other components.
- Main Body Moved CPU bay from front main body to rear:
- Added a second bay on opposite side.
- Unused second bay is an additional \"side panel\".
- Can be used to mount an extra 40mm fan, panel mounts, or leave covered with a blank plate.
- Main Body Zip tie anchors added:
- Six (6) added to crossbar.
- Four (4) added to front main body (under MCU pillars).
- Fifteen (15) added to rear main body:
- Four (4) under MCU pillars.
- Six (6) above MCU pillars.
- Five (5) by PSU wiring cutout.
- (New) Bottom Panel
- Removable panels for case underside.
- Prevents finger-pokey by curious children and dust intrusion (see Completed Requests below).
- Adds feet to the case.
- Core
- All core parts now have embossed version numbers to help with intermixing version numbers.
- Main Body
- Redesigned intakes and modified exhaust mounts.
- Easier to print.
- Made room at base for running wires through to external fans.
- Base
- Added a third front air vent.
- All three front vents how have 40mm fan mounts.
- CPU Trays
- New template and tray design
- Old trays still work.
- New tray is an easier print with fewer supports needed, can be printed in one of two orientations.
- New releases will only include new trays.
- Added Raspberry Pi tray with a 40mm fan intake.
These parts still need to be tested for fit and any other issues.
Hardware Mount Location(s) Notes Mean Well RSP-500 power supply PSU Tray For the Ender 5 Plus BIGTREETECH Manta M8P MCU Tray BIGTREETECH 5\" TFT Display Panel BIGTREETECH UPS 24V 1.0 Lower Bay Short tray only. BIGTREETECH SKR 3 MCU Tray BIGTREETECH SKR 3 EZ MCU Tray BIGTREETECH Relay 1.2 Lower Bay Long tray only."},{"location":"history/v0.9.9/#fixes","title":"Fixes","text":"- Issue #18: Fan mount blocks screw hole for mounting base
- Fan mount moved left and up as part of intake redesign.
- Issue #35: Hex nut for mounting IEC socket is hard to reach
- Removed hex nuts.
- Screws attach directly in plastic.
- Issue #33: Base zip tie anchors need adjustment
- Removed rearmost zip tie that was troublesome.
- Adjusted position of others.
- Issue #39: Display screen partially blocks two front main body/base screws
- Added cutout for access.
- Issue #37: Documentation site is missing license page
- Issue #51: Basic LM2596 mounting holes are incorrect
- Documentation site
- Added tooltips to links.
- Consolidated external links and added tooltips.
- Replaced assembly and illustration pictures with uniformly-styled generated graphics.
- Documentation site is now versioned.
- Assembly Guide
- Completely rewritten for 0.9.9.
- Basic wiring instructions included.
- Added links to additional guides for some areas.
- Video overviews for each section.
- Repository
- Documentation is no longer in the main repository.
- Renamed \"Fan Cages\" to \"Fans\".
- Further divided lids folders for ease of navigation.
- Lots of miscellaneous cleanup.
This is the initial test release of OmniBox, originally released on 2022-05-19.
Renders and Photos Big Bird V43 render Grover's new grill Grover in action Front Left Right Back (this is an example of one of the stock rear panels) Render v37 Render v42"},{"location":"support/","title":"Support Overview","text":"OmniBox has a large number of available components, many with multiple variants. Some of these have several printed pieces. Simply:
- A component is a common design, such as an MCU tray for a Bigtreetech SKR E3.
- A variant is a modified version of the stock component, such as a version of the above tray that takes heat set inserts.
- For simplicity, components and variants are parts.
Each part has an entry containing a bill of materials and other important information. Some parts have more than one printed piece; the BOM lists all printed pieces necessary and a download link.
The layout of this documentation is standardized, and most sections are organized by the name of the electronic component a part is designed to mount.
Below are explanations of the information you'll find in the Options & Support section.
"},{"location":"support/#fit-testing","title":"Fit Testing","text":"Before a component (such as a tray or panel) is merged into the main branch, it has to be tested. Parts that are waiting for fit testing are marked like so:
Fit Test Pending: Issue #NNN
If you print one of these parts, please report your results! There is usually an open issue on GitHub for that hardware component.
"},{"location":"support/#badges","title":"Badges","text":"Icon badges provide key details about a part at a glance.
"},{"location":"support/#basics","title":"Basics","text":"Size
Short
Long
Indicates the size of a part; this applies to lower bay trays and lids. Two (2) Short parts replace one (1) Long part.
Unified
Unified
Indicates a part is a single piece that replaces front and rear halves. Unified parts require large build plates.
Front and Rear
Front
Rear
Front and Rear parts can be printed in place of a Unified part. Front and Rear parts are not interchangeable, unlike Short parts. Applies to Base, Main Bodies, and Bottom Panels.
Heat Set Insert
Indicates a component or variant requires heat set inserts.
"},{"location":"support/#credits","title":"Credits","text":"Author
Name/Handle
Links to a public profile for the creator of a contributed part.
Origin
Name/Handle
If a part is derived from someone else's work, this links to their public profile.
"},{"location":"support/#versioning","title":"Versioning","text":"Template
template_version
All parts are based upon templates. These are useful in determining compatibility between parts and Core versions. See the Templates page for more.
Version
part_version
The current revision of a part. Part versions are are imprinted on newer components.
"},{"location":"support/#bases-and-psus","title":"Bases and PSUs","text":"Switch
Rocker
Identifies the type of power switch(es) compatible with a given power supply or base.
Depth
36mm
Either 36 or 42mm. For a base, this is the available depth for mounting a power supply. For a PSU, indicates the depth required.
IEC
This is only used for Bases that do not mount an IEC power inlet.
"},{"location":"support/#panel-specific","title":"Panel-specific","text":"Display
CPU
MCU
Indicates whether a display panel mounts a display that connects to a CPU or MCU.
Fan, Vent
Fan badges indicate that a part has a fan mount; vent badges signal that a part has cutouts for airflow.
Panel Mount
USB C, RJ-45
These badges list the types of panel mounts available on a given part.
"},{"location":"support/#component-types","title":"Component Types","text":""},{"location":"support/#trays","title":"Trays","text":"The four types of trays: MCU, CPU, PSU, and lower bay.Trays mount electronics most of your case's electronics.
- MCUs are mounted directly underneath the lid for easy access.
- CPUs sit on trays that can slide out the side of the case.
- Power supplies (PSUs) are inserted from below.
- Lower Bay Trays are used for parts such as buck converters and solid state relays. These occupy the middle of the case.
Panels are generally used for displays, fans, and panel-mounted connector extensions like USB ports and SD card readers. Lids can be put to a wide variety of uses, as well.
Panels cover the outside of the case.
- Display Panels mount LCD and TFT displays.
- Bottom Panels protect the PSU and allow airflow, if needed.
- Front Panels are a user-facing panel for MicroSD, USB ports, or even LED lights.
- Lids serve many purposes, including mounting large fans and/or a handle.
- Rear Panels pass-through wiring to your printer and can mount medium-sized fines.
- Side Panels are convenient air inlets and connector panels.
This page lists all bottom panels for OmniBox.
Bottom panels cover up the power supply and give your case feet.
"},{"location":"support/bottom/#front-half-panels","title":"Front Half Panels","text":"Blank/ClosedHexagonsMean Well Fan Exhaust
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Blank Front.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Hexagons Front.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Mean Well Front.stl 1 Ea"},{"location":"support/bottom/#rear-half-panels","title":"Rear Half Panels","text":"Blank/ClosedHexagons
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Blank Rear.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Hexagons Rear.stl 1 Ea"},{"location":"support/bottom/#unified-panels","title":"Unified Panels","text":"Blank/ClosedHexagonsMean Well Fan Exhaust
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Blank Unified.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Hexagons Unified.stl 1 Ea
bottom_v3
General Notes
(None)
Materials
Type Part Qty Printed Bottom Panel V3 - Mean Well Unified.stl 1 Ea"},{"location":"support/core/","title":"Core","text":"This page lists all Core component configurations for OmniBox.
"},{"location":"support/core/#main-body","title":"Main Body","text":""},{"location":"support/core/#frontrear-main-body","title":"Front/Rear Main Body","text":"StockHSIFull HSI
core_v0_9_11
General Notes
Most users will need to print the Main Body as two large pieces, Front and Rear.
Materials
Type Part Qty Printed Main Body - Front - Stock.stl 1 Ea Printed Main Body - Rear - Stock.stl 1 Ea Printed Main Body - Crossbar - Stock.stl 1 Ea DIN 912 M3 x 20mm SHCS 2 Ea DIN 912 M3 x 8mm SHCS 46 Ea DIN 912 M3 x 10mm SHCS 6 Ea
core_v0_9_11
General Notes
Most users will need to print the Main Body as two large pieces, Front and Rear.
Materials
Type Part Qty Printed Main Body - Front - HSI.stl 1 Ea Printed Main Body - Rear - HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 16mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 12 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 52 Ea
core_v0_9_11
General Notes
Most users will need to print the Main Body as two large pieces, Front and Rear.
Variant Notes
\"Full HSI\" includes 24 additional inserts for mounting the lower bay trays.
Materials
Type Part Qty Printed Main Body - Front - Full HSI.stl 1 Ea Printed Main Body - Rear - Full HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 12 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 76 Ea"},{"location":"support/core/#unified-main-body","title":"Unified Main Body","text":"StockHSIFull HSI
core_v0_9_11
General Notes
Printing a unified Main Body requires a bed at least 315mm on one axis.
Materials
Type Part Qty Printed Main Body - Unified - Stock.stl 1 Ea Printed Main Body - Crossbar - Stock.stl 1 Ea DIN 912 M3 x 20mm SHCS 2 Ea DIN 912 M3 x 8mm SHCS 40 Ea DIN 912 M3 x 10mm SHCS 6 Ea
core_v0_9_11
General Notes
Printing a unified Main Body requires a bed at least 315mm on one axis.
Materials
Type Part Qty Printed Main Body - Unified - HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 16mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 46 Ea
core_v0_9_11
General Notes
Printing a unified Main Body requires a bed at least 315mm on one axis.
Materials
Type Part Qty Printed Main Body - Unified - Full HSI.stl 1 Ea Printed Main Body - Crossbar - HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 40 Ea DIN 912 M3 x 8mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 70 Ea"},{"location":"support/core/#base","title":"Base","text":""},{"location":"support/core/#basic-base-frontrear","title":"Basic Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 36mm Front - Basic Stock.stl 1 Ea Printed Base - 36mm Rear - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea
core_v0_9_11
36mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 36mm Front - Basic HSI.stl 1 Ea Printed Base - 36mm Rear - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 22 Ea DIN 912 M3 x 12mm SHCS 4 Ea
core_v0_9_11
42mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 42mm Front - Basic Stock.stl 1 Ea Printed Base - 42mm Rear - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea
core_v0_9_11
42mm
None
General Notes
These bases come without power switches or IEC power inlets.
Materials
Type Part Qty Printed Base - 42mm Front - Basic HSI.stl 1 Ea Printed Base - 42mm Rear - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 22 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/core/#basic-base-unified","title":"Basic Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 36mm Unified - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 36mm Unified - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 18 Ea
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 42mm Unified - Basic Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea
core_v0_9_11
None
General Notes
- These bases come without power switches or IEC power inlets.
- Printing a unified Base requires a bed at least 300mm on one axis.
Materials
Type Part Qty Printed Base - 42mm Unified - Basic HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 18 Ea"},{"location":"support/core/#iec-socket-base-frontrear","title":"IEC Socket Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Front - Basic Stock.stl 1 Ea Printed Base - 36mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Front - Basic HSI.stl 1 Ea Printed Base - 36mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Front - Basic Stock.stl 1 Ea Printed Base - 42mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Front - Basic HSI.stl 1 Ea Printed Base - 42mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#iec-socket-base-unified","title":"IEC Socket Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Unified - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 36mm Unified - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Unified - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
None
General Notes
These bases have an IEC power inlet but lack power switches.
Materials
Type Part Qty Printed Base - 42mm Unified - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 3 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 30 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#rocker-switch-base-frontrear","title":"Rocker Switch Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - Stock with Rocker.stl 1 Ea Printed Base - 36mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - HSI with Rocker.stl 1 Ea Printed Base - 36mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - Stock with Rocker.stl 1 Ea Printed Base - 42mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - HSI with Rocker.stl 1 Ea Printed Base - 42mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#rocker-switch-base-unified","title":"Rocker Switch Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC Stock with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC HSI with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC Stock with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea
core_v0_9_11
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC HSI with Rocker.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Switch SPST Rocker Switch, 29mm x 10.5mm Panel Mount 1 Ea Printed Power Switch Protector.stl 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea"},{"location":"support/core/#toggle-switch-base-frontrear","title":"Toggle Switch Base (Front/Rear)","text":"36mm Front/Rear36mm Front/Rear, HSI42mm Front/Rear42mm Front/Rear, HSI
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - Stock with Toggle.stl 1 Ea Printed Base - 36mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Front - HSI with Toggle.stl 1 Ea Printed Base - 36mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - Stock with Toggle.stl 1 Ea Printed Base - 42mm Rear - IEC Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Front - HSI with Toggle.stl 1 Ea Printed Base - 42mm Rear - IEC HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 12mm SHCS 4 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea"},{"location":"support/core/#toggle-switch-base-unified","title":"Toggle Switch Base (Unified)","text":"36mm Unified36mm Unified, HSI42mm Unified42mm Unified, HSI
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC Stock with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
36mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 36mm Unified - IEC HSI with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC Stock with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 10 Ea DIN 912 M3 x 8mm SHCS 2 Ea Other Fasteners #6 x 3/4\" Wood Screw 8 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea
core_v0_9_11
42mm
Toggle
General Notes
(None)
Materials
Type Part Qty Printed Base - 42mm Unified - IEC HSI with Toggle.stl 1 Ea DIN 912 M3 x 6mm SHCS 12 Ea DIN 912 M3 x 8mm SHCS 8 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Electrical Connector IEC C14 Socket with Fuse Holder 1 Ea Electrical Connector Insulated Spade Connector, Female, 14-16 awg 5 Ea Electrical Connector Insulated Fork Connector, #8, 14-16 awg 3 Ea Other Electrical Stranded Hookup Wire, 16 awg/1.25mm2 80 cm Other Electrical Glass Fuse, 5mm x 20mm, Fast Blow 1 Ea Switch SPST Toggle Switch, 12mm Panel Mount 1 Ea"},{"location":"support/cpu/","title":"CPUs","text":"This page lists system-on-a-chip (SoC) CPUs currently compatible with OmniBox. These are commonly known as single board computers (SBC).
CPU trays can be mounted on the left or right side of the case.
If you do not use an SBC, the side of the CPU bay can be used as a Side Panel.
"},{"location":"support/cpu/#raspberry-pi-3b","title":"Raspberry Pi 3B+","text":"cpu_v3
General Notes
(None)
Materials
Type Part Qty Printed CPU Tray V3 - RPi 3B+.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea CPU Raspberry Pi 3B+ 1GB 1 Ea"},{"location":"support/cpu/#raspberry-pi-4b","title":"Raspberry Pi 4B","text":"cpu_v3
General Notes
(None)
Materials
Type Part Qty Printed CPU Tray V3 - RPi 4B.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea"},{"location":"support/cpu/#raspberry-pi-and-compatible","title":"Raspberry Pi and compatible","text":"No FanNo Fan, HSI40mm Fan40mm Fan, HSI50mm Fan50mm Fan, HSI
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray without Fan.stl 1 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray without Fan - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray with 40mm Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray w 40mm Fan - HSI.stl 1 Ea Fan 40mm x 10mm Axial Fan 4 Ea DIN 912 M3 x 12mm SHCS 16 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray with 50mm Fan.stl 1 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
Materials
Type Part Qty Printed RPi Universal Tray w 50mm Fan - HSI.stl 1 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea CPU Raspberry Pi 4B+ 2GB 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/display/","title":"Displays","text":"This page lists all displays compatible with OmniBox.
Display panels are the primary method of interacting with your OmniBox.
"},{"location":"support/display/#bigtreetech-35-tft","title":"Bigtreetech 3.5\" TFT","text":"display_v2
MCU
General Notes
This is not the E3 version, which has its own display mount.
Materials
Type Part Qty Printed Display Panel - BTT TFT35.stl 1 Ea Display Bigtreetech 3.5\" TFT 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M3 x 8mm SHCS 4 Ea"},{"location":"support/display/#bigtreetech-35-tft-e3","title":"Bigtreetech 3.5\" TFT E3","text":"display_v3
MCU
General Notes
(None)
Materials
Type Part Qty Printed Display Panel - BTT TFT35-E3.stl 1 Ea Display Bigtreetech 3.5\" TFT E3 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/display/#bigtreetech-hdmi5","title":"Bigtreetech HDMI5","text":"display_v2
SirUli
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display - BTT HDMI5 - Panel - HSI.stl 1 Ea Printed Display - BTT HDMI5 - Holder.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Display Bigtreetech HDMI5 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M3 x 15mm SHCS 4 Ea"},{"location":"support/display/#bigtreetech-pi-tft50","title":"Bigtreetech Pi TFT5.0","text":"StockHSI
display_v2
MaffooClock
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display Panel - BTT PI TFT50.stl 1 Ea Printed Display Mount - BTT PI TFT50.stl 1 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M2.5 x 6mm SHCS 8 Ea
display_v2
MaffooClock
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display Panel - BTT PI TFT50 - HSI.stl 1 Ea Printed Display Mount - BTT PI TFT50.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M2.5 x 6mm SHCS 8 Ea"},{"location":"support/display/#generic-128x64","title":"Generic 128x64","text":"display_v2
MCU
General Notes
- Also known as Creality CR-10 stock display in Marlin.
- Common on many older i3-style and Creality printers.
Materials
Type Part Qty Printed Display Panel - Generic 12864.stl 1 Ea Display Generic 128x64 Display 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/display/#generic-raspberry-pi-tft","title":"Generic Raspberry Pi TFT","text":"display_v2
CPU
General Notes
(None)
Materials
Type Part Qty Printed Display Mount - Raspberry Pi TFT.stl 1 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M2.5 x 6mm SHCS 4 Ea Other Fasteners M2.5 Brass Standoff, Female/Male, 12mm + 6mm 4 Ea"},{"location":"support/display/#mini-12864","title":"Mini 12864","text":"display_v2
MCU
General Notes
Compatible with FYSETC, Bigtreetech, and other brands.
Materials
Type Part Qty Printed Display Mount - Mini 12864 - Panel.stl 1 Ea Printed Display Mount - Mini 12864 - Front Plate.stl 1 Ea Printed Display Mount - Mini 12864 - Spacer.stl 1 Ea Display Mini 12864 Display 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea DIN 912 M3 x 20mm SHCS 4 Ea"},{"location":"support/fans/","title":"Fans","text":"This is a list of all fans sizes that OmniBox currently supports via fan cages. OmniBox has optional, concealed mounts for 40mm x 10mm fans. These do not use fan cages or gaskets.
40mm fans are the most commonly used. Rear panels can support fans up to 80mm and lids up to 120mm.
Fan cages and fan gaskets are stored in the /Fans git folder. The /Fans/Template folder contains parametric Fusion 360 files to add support for additional fans.
40x10
Product Link
- Internal Materials: 4x M3 x 16mm (12mm if counterbored)
- External Materials: 4x M3 x 20mm
- Fits: Side Panel, Lids, Rear Panel
40x20
Product Link
- Internal Materials: 4x M3 x 25mm (20mm if counterbored)
- External Materials: 4x M3 x 30mm
- Fits: Side Panel, Lids, Rear Panel
Fit Test Pending: See Issue #122
50x10
Product Link
- Materials: 4x M3 x 15mm
- Fits: Side Panel, Lids, Rear Panel
50x12
Product Link
- Materials: 4x M3 x 16mm
- Fits: Side Panel, Lids, Rear Panel
- Notes:
- This part will not fit 10mm deep fans (5010 fans).
- These fans are uncommon and normally 12V.
Fit Test Pending: See Issue #122
50x15
Product Link
- Materials: 4x M3 x 20mm
- Fits: Side Panel, Lids, Rear Panel
60x15
Product Link
- Materials: 4x M3 x 25mm
- Fits: Lids, Rear Panel
60x20
Product Link
- Materials: 4x M3 x 30mm
- Fits: Lids, Rear Panel
60x25
Product Link
- Materials: 4x M3 x 35mm
- Fits: Lids, Rear Panel
80x20
Product Link
- Materials: 4x M4 x 30mm
- Fits: Lids, Rear Panel
80x25
Product Link
- Materials: 4x M4 x 35mm
- Fits: Lids, Rear Panel
92x25
Product Link
- Materials: 4x M4 x 35mm
- Fits: Lids
120x25
Product Link
- Materials: 4x M4 x 35mm
- Fits: Lids
This page lists all front panels for OmniBox.
Front panels provide ventilation and can mount SD card extensions, USB connectors, or even LED lights.
Panels normally have one of three vent styles:
- Hexagons (Left)
- Slots (Center)
- Angled Slats (Right)
fp_v1
General Notes
This is an STL of the front panel template. Print in translucent/transparent PETG and pair with LEDs for light effects (e.g. print status LEDs).
Materials
Type Part Qty Printed Front Panel - Blank.stl 1 Ea"},{"location":"support/front/#microsd-extension","title":"MicroSD Extension","text":"HexagonsSlatsSlots
fp_v1
MicroSD
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, Hexagons.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea
fp_v1
MicroSD
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, Slats.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea
fp_v1
MicroSD
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, Slots.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea"},{"location":"support/front/#microsd-and-keystone-jack","title":"MicroSD and Keystone Jack","text":"HexagonsSlatsSlots
fp_v1
MicroSD, Keystone
General Notes
Users will need to provide a keystone jack-compatible cable. This is not included in the materials list.
Materials
Type Part Qty Printed Front Panel - MicroSD, Keystone Jack, Hexagons.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea
fp_v1
MicroSD, Keystone
General Notes
Users will need to provide a keystone jack-compatible cable. This is not included in the materials list.
Materials
Type Part Qty Printed Front Panel - MicroSD, Keystone Jack, Slats.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea
fp_v1
MicroSD, Keystone
General Notes
Users will need to provide a keystone jack-compatible cable. This is not included in the materials list.
Materials
Type Part Qty Printed Front Panel - MicroSD, Keystone Jack, Slots.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea"},{"location":"support/front/#microsd-and-usb-b-extensions","title":"MicroSD and USB B Extensions","text":"HexagonsSlatsSlots
fp_v1
MicroSD, USB B
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB B, Hexagons.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea
fp_v1
MicroSD, USB B
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB B, Slats.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea
fp_v1
MicroSD, USB B
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB B, Slots.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea"},{"location":"support/front/#microsd-and-usb-c-extensions","title":"MicroSD and USB C Extensions","text":"HexagonsSlatsSlots
fp_v1
MicroSD, USB C
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB C, Hexagons.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea
fp_v1
MicroSD, USB C
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB C, Slats.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea
fp_v1
MicroSD, USB C
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - MicroSD, USB C, Slots.stl 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Printed MicroSD Extension Holder Body.stl 1 Ea Printed MicroSD Extension Holder Cap.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea"},{"location":"support/front/#vent-only","title":"Vent Only","text":"HexagonsSlatsSlots
fp_v1
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - Vent Only Hexagons.stl 1 Ea
fp_v1
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - Vent Only Slats.stl 1 Ea
fp_v1
General Notes
(None)
Materials
Type Part Qty Printed Front Panel - Vent Only Slots.stl 1 Ea"},{"location":"support/lid/","title":"Lids","text":"This page lists all lids available for OmniBox.
"},{"location":"support/lid/#120mm-fan-lids","title":"120mm Fan Lids","text":"120mm Fan120mm Fan, Handle120mm Fan, Handle, HSI
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Fan Only.stl 1 Ea Fan 120mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 12025 - Screen.stl 1 Ea Printed Fan Gasket - 12025.stl 1 Ea
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - 120mm Fan and Handle.stl 1 Ea Printed Carry Handle - Stock.stl 1 Ea DIN 912 M3 x 8mm SHCS 2 Ea Fan 120mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 12025 - Screen.stl 1 Ea Printed Fan Gasket - 12025.stl 1 Ea
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - 120mm Fan and Handle.stl 1 Ea Printed Carry Handle - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 6mm SHCS 2 Ea Fan 120mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 12025 - Screen.stl 1 Ea Printed Fan Gasket - 12025.stl 1 Ea"},{"location":"support/lid/#carry-handle-lid","title":"Carry Handle Lid","text":"LongLong, HSIShortShort, HSI
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Carry Lid.stl 1 Ea Printed Carry Handle - Stock.stl 1 Ea DIN 912 M3 x 8mm SHCS 2 Ea
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Carry Lid.stl 1 Ea Printed Carry Handle - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 6mm SHCS 2 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Carry Lid.stl 1 Ea Printed Carry Handle - Stock.stl 1 Ea DIN 912 M3 x 8mm SHCS 2 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Carry Lid.stl 1 Ea Printed Carry Handle - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea DIN 912 M3 x 6mm SHCS 2 Ea"},{"location":"support/lid/#raspberry-pi-display-lids","title":"Raspberry Pi Display Lids","text":"5in RPi TFT7in RPi TFT
lid_v1
Short
CPU
General Notes
These lids use the mounting pattern from a Raspberry Pi; as such, they are compatible with any display that mounts a Raspberry Pi on the back.
Materials
Type Part Qty Printed Lid - RPi TFT.stl 1 Ea Display Bigtreetech 5\" Pi TFT 1 Ea DIN 912 M2.5 x 6mm SHCS 4 Ea Other Fasteners M2.5 Brass Standoff, Female/Male, 12mm + 6mm 4 Ea
lid_v1
Short
CPU
General Notes
These lids use the mounting pattern from a Raspberry Pi; as such, they are compatible with any display that mounts a Raspberry Pi on the back.
Materials
Type Part Qty Printed Lid - XL RPi TFT.stl 1 Ea Display Raspberry Pi 7\" TFT 1 Ea DIN 912 M2.5 x 6mm SHCS 4 Ea Other Fasteners M2.5 Brass Standoff, Female/Male, 12mm + 6mm 4 Ea"},{"location":"support/lid/#rubbermaid-21-cup-drybox","title":"Rubbermaid 21 cup Drybox","text":"lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Drybox Holder - Rubbermaid 21qt.stl 1 Ea"},{"location":"support/lid/#short-fan-lids","title":"Short Fan Lids","text":"Dual 40mm Fans80mm Fan92mm Fan
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Fan 40mm x 10mm Axial Fan 2 Ea Printed 4010 Fan Cage.stl 2 Ea Printed 4010 Fan Gasket, TPU.stl 2 Ea DIN 912 M3 x 16mm SHCS 8 Ea Printed Half Lid - Dual 40mm Fans.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Lid - 80mm Fan.stl 1 Ea Fan 80mm x 20mm Axial Fan 1 Ea DIN 912 M4 x 30mm SHCS 4 Ea Printed 8020 Fan Cage.stl 1 Ea Printed 8020 Fan Gasket.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Half Lid - 92mm Fan.stl 1 Ea Fan 92mm x 25mm Axial Fan 1 Ea DIN 912 M4 x 35mm SHCS 4 Ea Printed Fan Cage - 9225 - Screen.stl 1 Ea Printed Fan Gasket - 9225.stl 1 Ea"},{"location":"support/lid/#simpleblank-lids","title":"Simple/Blank Lids","text":"Long BlankShort BlankShort Vent
lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Long Blank.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lid - Short Blank.stl 1 Ea
lid_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lid - Short Vent.stl 1 Ea"},{"location":"support/lid/#spool-roller-lid","title":"Spool Roller Lid","text":"lid_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lid - Spool Roller.stl 1 Ea Printed Spool Roller.stl 4 Ea DIN 912 M3 x 16mm SHCS 4 Ea Bearings 688ZZ Radial Ball Bearing 4 Ea"},{"location":"support/lower_bay/","title":"Lower Bay","text":"Lower Bay Trays may be Short or Long. A Long tray covers the mount points of two Short trays and must be mounted from side-to-side in the case.
Every tray (short or long) attaches to the Core case body with four (4) M3 x 6mm screws. Additional materials are listed with each part.
Up to three (3) Long trays will fit in a case, or six (6) Short trays. A Short tray is pictured."},{"location":"support/lower_bay/#basic-lm2596","title":"Basic LM2596","text":"ShortShort, DualLong, FanLong, DualLong, Dual, Fan
lower_bay_v1
Short
Single
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Buck Converter Basic LM2596 1 Ea Printed Lower Bay Tray - Generic LM2596 - Short Single Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea
lower_bay_v1
Short
Dual
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Short Dual Tray.stl 1 Ea Buck Converter Basic LM2596 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea
lower_bay_v1
Long
Single
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Long Single with Fan.stl 1 Ea Buck Converter Basic LM2596 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea
lower_bay_v1
Long
Dual
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Long Dual Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter Basic LM2596 2 Ea
lower_bay_v1
Long
Dual
General Notes
This converter requires a heat sink to safely output 3A.
Materials
Type Part Qty Printed Lower Bay Tray - Generic LM2596 - Long Dual with Fan.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter Basic LM2596 2 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/lower_bay/#bigtreetech-relay","title":"Bigtreetech Relay","text":"lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - BIGTREETECH Relay 1.2.stl 1 Ea Other Electrical Bigtreetech Relay 1.2 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/lower_bay/#bigtreetech-u2c-can-adapter","title":"Bigtreetech U2C CAN Adapter","text":"lower_bay_v1
edgy
General Notes
- Socket head screws are too large for the terminals.
- See the Printables page for more details.
Materials
Type Part Qty Printed OmniBox Lower Bay Short Tray for BTT U2C (Printables) 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Other Electrical Bigtreetech U2C CAN Adapter 1 Ea DIN 7380 M3 x 6mm BHCS 4 Ea"},{"location":"support/lower_bay/#bigtreetech-ups-24v","title":"Bigtreetech UPS 24V","text":"Fit Test Pending: See Issue #24
lower_bay_v1
General Notes
(None)
Materials
Type Part Qty Printed Bigtreetech UPS 24V 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Other Electrical Bigtreetech UPS 24V 1 Ea"},{"location":"support/lower_bay/#creality-mosfet","title":"Creality MOSFET","text":"ShortShort, HSILongLong, HSI
lower_bay_v1
Short
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Short.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Electrical Creality MOSFET 1 Ea
lower_bay_v1
Short
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Short HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Other Electrical Creality MOSFET 1 Ea
lower_bay_v1
Long
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Long.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Electrical Creality MOSFET 1 Ea
lower_bay_v1
Long
Single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - Creality MOSFET - Long HSI.stl 1 Ea DIN 912 M3 x 6mm SHCS 6 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 2 Ea Other Electrical Creality MOSFET 1 Ea"},{"location":"support/lower_bay/#drok-3a-lm2596","title":"DROK 3A LM2596","text":"ShortLong, DualLong, Dual, Fan
lower_bay_v1
Short
single
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - DROK 3A LM2596 - Short Single Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter DROK 3A LM2596 with LED 1 Ea
lower_bay_v1
Long
Dual
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - DROK 3A LM2596 - Long Dual Tray.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter DROK 3A LM2596 with LED 1 Ea
lower_bay_v1
Long
Dual
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - DROK 3A LM2596 - Long Single with Fan.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea Buck Converter DROK 3A LM2596 with LED 1 Ea"},{"location":"support/lower_bay/#drok-5a-buck-converter","title":"DROK 5A Buck Converter","text":"LongLong, Wago
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 63mm x 40.5mm.
Materials
Type Part Qty Printed Lower Bay - DROK 5A Buck with LED.stl 1 Ea Buck Converter DROK 5A Buck with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 63mm x 40.5mm.
Materials
Type Part Qty Printed Lower Bay - DROK 5A Buck with LED - Dual Wago.stl 1 Ea Electrical Connector Wago 221-413 3-Position Lever Nut 2 Ea Buck Converter DROK 5A Buck with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/lower_bay/#drok-lm2596-with-led","title":"DROK LM2596 with LED","text":"ShortLong, FanLong, DualLong, Dual, Fan
lower_bay_v1
Short
Single
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Printed Lower Bay Tray - DROK 3A LM2596 - Short Single Tray.stl 1 Ea
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea Printed Lower Bay Tray - DROK LM2596 - Long Single with Fan.stl 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - DROK LM2596 - Long Dual.stl 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 60.5mm x 30.5mm.
Materials
Type Part Qty Buck Converter DROK 3A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - DROK LM2596 - Long Dual with Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/lower_bay/#fotek-ssr-40-da","title":"Fotek SSR-40 DA","text":"ShortLong
lower_bay_v1
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay - SSR-40 DA - Short.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Other Electrical Fotek SSR-40 DA 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay - SSR-40 DA - Long.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea Other Electrical Fotek SSR-40 DA 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea"},{"location":"support/lower_bay/#hiletgo-lm2596-with-led","title":"HiLetGo LM2596 with LED","text":"ShortLong, FanLong, DualLong, Dual, Fan
lower_bay_v1
Short
Single
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Printed Lower Bay Tray - HiLetGo LM2596 - Short Single.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Buck Converter HiLetGo 2A LM2596 with LED 1 Ea
lower_bay_v1
Long
Single
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Printed Lower Bay Tray - HiLetGo LM2596 - Long Single with Fan.stl 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea Buck Converter HiLetGo 2A LM2596 with LED 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Buck Converter HiLetGo 2A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - HiLetGo LM2596 - Long Dual.stl 1 Ea
lower_bay_v1
Long
Dual
General Notes
The hole pattern for this part is 49.5mm x 27.5mm.
Materials
Type Part Qty Buck Converter HiLetGo 2A LM2596 with LED 2 Ea DIN 912 M3 x 6mm SHCS 12 Ea Printed Lower Bay Tray - HiLetGo LM2596 - Long Dual with Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/lower_bay/#lower-bay-40mm-fan","title":"Lower Bay 40mm Fan","text":"lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - 40mm Fan.stl 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/lower_bay/#omron-g3nag3a-ssr","title":"Omron G3NA/G3A SSR","text":"LongShort
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - 48mm SRR - Long Tray.stl 1 Ea Other Electrical Omron G3NA/G3A Solid State Relay 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Printed Lower Bay Tray - 48mm SRR - Short Tray.stl 1 Ea Other Electrical Omron G3NA/G3A Solid State Relay 1 Ea DIN 912 M4 x 6mm SHCS 2 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/lower_bay/#wago-221-series-lever-nuts","title":"Wago 221 Series Lever Nuts","text":"4x 3 Pos4x 5 Pos, 2x 3 Pos4x 5 Pos8x 3 Pos
lower_bay_v1
Short
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-413 3-Position Lever Nut 4 Ea Printed Lower Bay Tray - Wago Nuts - 3Px4.stl None Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-413 3-Position Lever Nut 2 Ea Electrical Connector Wago 221-415 5-Position Lever Nut 4 Ea Printed Lower Bay Tray - Wago Nuts - 5Px4, 3Px2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-415 5-Position Lever Nut 4 Ea Printed Lower Bay Tray - Wago Nuts - 5Px4.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
lower_bay_v1
Long
General Notes
(None)
Materials
Type Part Qty Electrical Connector Wago 221-413 3-Position Lever Nut 8 Ea Printed Lower Bay Tray - Wago Nuts - 8x3P.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/","title":"MCUs","text":"This page lists microcontroller boards that are currently compatible with OmniBox.
MCUs are mounted near the lid for accessibility.
Tip
Looking for a board that isn't listed? Open an issue!
"},{"location":"support/mcu/#btt-skr-e3-and-skr-pico","title":"BTT SKR E3 and SKR Pico","text":"mcu_v2
Dual
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - SKR E3 + Pico v2.stl 1 Ea MCU Bigtreetech SKR E3 Series 1 Ea MCU Bigtreetech SKR Pico 1 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/mcu/#bigtreetech-manta-e3ez","title":"Bigtreetech Manta E3EZ","text":"Fit Test Pending: See Issue #135
StockHSI
mcu_v2
Single
General Notes
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta E3EZ v2 - Stock.stl 1 Ea MCU Bigtreetech Manta E3 EZ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Single
General Notes
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta E3EZ v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea MCU Bigtreetech Manta E3 EZ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-manta-m5p","title":"Bigtreetech Manta M5P","text":"Fit Test Pending: See Issue #136
mcu_v2
Single
General Notes
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta M5P v2.stl 1 Ea MCU Bigtreetech Manta M5P 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-manta-m8p","title":"Bigtreetech Manta M8P","text":"mcu_v2
Single
General Notes
- Compatible with all versions.
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Manta M8P v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech Manta M8P 1 Ea"},{"location":"support/mcu/#bigtreetech-octopusoctopus-pro","title":"Bigtreetech Octopus/Octopus Pro","text":"mcu_v2
Single
General Notes
- All members of the Octopus series (Octopus, Octopus Pro) are compatible.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT Octopus - v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech Octopus Series 1 Ea"},{"location":"support/mcu/#bigtreetech-skr-13142","title":"Bigtreetech SKR 1.3/1.4/2","text":"mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKR v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech SKR v1.3-2.0 1 Ea"},{"location":"support/mcu/#bigtreetech-skr-3","title":"Bigtreetech SKR 3","text":"Fit Test Pending: See Issue #48
mcu_v2
single
General Notes
- SKR 3 EZ and earlier SKR models are incompatible.
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT SKR 3 v2.stl 1 Ea MCU Bigtreetech SKR 3 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-skr-3-ez","title":"Bigtreetech SKR 3 EZ","text":"mcu_v2
single
General Notes
- Incompatible with the SKR 3.
- Prefer a long MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT SKR 3 EZ - v2.stl 1 Ea MCU Bigtreetech SKR 3 EZ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#bigtreetech-skr-e3-series","title":"Bigtreetech SKR E3 Series","text":"SingleDual
mcu_v2
Single
General Notes
- Compatible with all BTT SKR E3 boards.
- Compatible with all Creality 1.x and 4.x boards.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - BTT SKR E3 v2.stl 1 Ea MCU Bigtreetech SKR E3 Series 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Dual
General Notes
- Compatible with all BTT SKR E3 boards.
- Compatible with all Creality 1.x and 4.x boards.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - Double SKR E3 v2.stl 1 Ea MCU Bigtreetech SKR E3 Series 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/mcu/#bigtreetech-skr-pico","title":"Bigtreetech SKR Pico","text":"Single, HSIDual, StockDual, HSI
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKR Pico - v2 HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea MCU Bigtreetech SKR Pico 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Dual
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - Dual BTT SKR Pico v2 - Stock.stl 1 Ea MCU Bigtreetech SKR Pico 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea
mcu_v2
Dual
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - Dual BTT SKR Pico v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 8 Ea MCU Bigtreetech SKR Pico 2 Ea DIN 912 M3 x 6mm SHCS 8 Ea"},{"location":"support/mcu/#bigtreetech-skrat","title":"Bigtreetech SKRat","text":"StockHSI
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKRat v2 Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech SKRat 1 Ea
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - BTT SKRat v2 HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Bigtreetech SKRat 1 Ea"},{"location":"support/mcu/#creality-2x-series","title":"Creality 2.x Series","text":"StockHSI
mcu_v2
Mr Meh
Single
General Notes
Compatible with all 2.x.x versions.
Materials
Type Part Qty Printed MCU Tray - M3 Creality 2.5.2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Creality 2.x Series 1 Ea
mcu_v2
Mr Meh
Single
General Notes
Compatible with all 2.x.x versions.
Materials
Type Part Qty Printed MCU Tray - M3 - HSI - Creality 2.5.2.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU Creality 2.x Series 1 Ea"},{"location":"support/mcu/#duet3d-duet-3-6hc","title":"Duet3D Duet 3 6HC","text":"mcu_v2
Single
General Notes
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - Duet3D Duet 3 6HC v2.stl 1 Ea MCU Duet3D Duet 3 6HC 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#duet3d-duet-3-mini-5","title":"Duet3D Duet 3 Mini 5+","text":"mcu_v2
Single
General Notes
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - Duet3D Duet 3 Mini 5+ v2.stl 1 Ea MCU Duet3D Duet 3 Mini 5+ 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/mcu/#fysetc-spider-series","title":"FYSETC Spider Series","text":"mcu_v2
MaffooClock
Single
General Notes
- Tested with version 2.x, may work with version 1.
- Prefer a short MicroSD extension.
Materials
Type Part Qty Printed MCU Tray - FYSETC Spider v2.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU FYSETC Spider Series 1 Ea"},{"location":"support/mcu/#makerbase-mks-monster-8","title":"MakerBase MKS Monster 8","text":"Fit Test Pending: See Issue #74
StockHSI
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Monster8 v2 - Stock.stl 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU MKS Monster8 1 Ea
mcu_v2
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Monster8 v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea DIN 912 M3 x 6mm SHCS 4 Ea MCU MKS Monster8 1 Ea"},{"location":"support/mcu/#makerbase-mks-skipr","title":"MakerBase MKS Skipr","text":"StockHSI
mcu_v2
Killajoedotcom
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Skipr v2 - Stock.stl 1 Ea MCU MKS Skipr 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea
mcu_v2
Killajoedotcom
Single
General Notes
(None)
Materials
Type Part Qty Printed MCU Tray - MKS Skipr v2 - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea MCU MKS Skipr 1 Ea DIN 912 M3 x 6mm SHCS 4 Ea"},{"location":"support/panel_mounts/","title":"Panel Mounts","text":""},{"location":"support/panel_mounts/#using-panel-mounts","title":"Using Panel Mounts","text":"Panel mounts allow you to disconnect components without opening up the case. Some examples:
- USB extensions for a webcam.
- MicroSD extensions for an MCU or SBC.
- Rear panel connectors for disconnecting the printer's wiring harness.
Each panel type comes with a template for making your own panels. See Creating New Panels below for more.
"},{"location":"support/panel_mounts/#fans","title":"Fans","text":"See the Fans page for a list of all fan options.
"},{"location":"support/panel_mounts/#microsd-extensions","title":"MicroSD Extensions","text":"These are availabe in short or long versions and are typically used with MCUs, though they can also be used with a CPU, such as a Raspberry Pi.
Most MCUs recommend either a short MicroSD extension (15cm/6\" long) or longer (48cm/18\") should be used.
MicroSD Extension, 15cm
MicroSD Extension, 48cm
"},{"location":"support/panel_mounts/#usb-extensions","title":"USB Extensions","text":"Right angle connectors are often a good choice, particularly for CPUs and large MCUs.
USB 2 Type A Panel Mount
USB 2 Type B Panel Mount
USB 3 Type A Panel Mount
USB C Panel Mount Extension
"},{"location":"support/panel_mounts/#keystone-jacks","title":"Keystone Jacks","text":"Keystone jacks support a variety of multimedia cables: USB, HDMI, and Ethernet, among others. As a result, keystone jacks offer flexibility in choosing which connectors to mount. A blank plate can occupy an unused jack cutout.
These are commonly used on the front, side, or rear panels. Currently, designs with keystone jack cutouts exist for the front and side panels.
Below are several common keystone jacks.
USB 3.0 Keystone Jack
HDMI Keystone Jack
RJ45 Keystone Jack
USB C Keystone Jack
"},{"location":"support/panel_mounts/#other-connectors","title":"Other Connectors","text":"JST SM and Molex's Micro Fit 3.0 connectors can both be panel-mounted. These are useful when creating detachable wiring harnesses.
"},{"location":"support/panel_mounts/#jst-sm","title":"JST SM","text":"Caution: Avoid JST SM as a hotend connector for enclosed printers
These are good, low-current (3A max) connectors for devices such as limit switches, lights, steppers, and fans. However, they are larger than connectors with similar pin spacings.
JST SM Kit
Further reading: JST SM on The Clockmaker Project
"},{"location":"support/panel_mounts/#molex-micro-fit-30","title":"Molex Micro Fit 3.0","text":"These make excellent connectors for printers, particularly for hotends. They are rated to 5 Amperes with standard pins (9.5A with gold pins).
Connectors up to 2 row, 24 positions are available.
Molex MicroFit 3.0 Kit
Further reading: Molex Micro Fit 3.0 on The Clockmaker Project
"},{"location":"support/panel_mounts/#xt-60","title":"XT-60","text":"This connector is most well known for RC electronics and Creality printer beds. They should be used with 12 AWG wire for their rated current, though 13 AWG/2.5mm2 is often used for 220W beds.
XT60E-M Male Panel Mount
XT60E-F Female Panel Mount
Further reading: XT-60 on The Clockmaker Project
"},{"location":"support/panel_mounts/#molex-mini-fit-jr","title":"Molex Mini Fit Jr.","text":"Mini Fit Jr connectors are commonly seen in computers for the ATX and PCIE connectors. They are reliable connectors rated up to 9.5A with 18 AWG (~1 mm2) wires.
Mini Fit Jr 2 Position Connector Sets
Mini Fit Jr 4 Position Connector Sets
Further reading: Mini Fit Jr on The Clockmaker Project
"},{"location":"support/panel_mounts/#creating-new-panels","title":"Creating New Panels","text":"In addition to templates for the panels themselves, template cutouts are available for panel-mounted connectors.
Panel Mounts
The solid bodies in the STEP and Fusion 360 files:
- Have sufficient clearance to insert the connector; and
- Are the correct thickness for the connector (e.g. for panel mount ears to engage).
The Fusion 360 file also contains sketches for cut-and-paste.
"},{"location":"support/panel_mounts/#other-templates","title":"Other Templates","text":"Ginger Saw published on Printables a more extensive set of JST SM panel mounts, up to 10 pins.
JST SM Panel Mounts for 1.5-2mm panels
"},{"location":"support/psu/","title":"PSUs","text":"This page lists power supplies (PSUs) currently supported by OmniBox.
Power supplies are mounted underneath the case body.
Note: Mean Well Clones
There are several brands of clones, usually using the same model number as Mean Well. The most common of these is the Landy LRS-350-24. These clones are generally compatible with the Mean Well trays.
"},{"location":"support/psu/#mean-well-lrs-350-series","title":"Mean Well LRS-350 Series","text":"StockHSI
psu_v2
36mm
Any
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-350 - Left.stl 1 Ea Printed PSU Mount - LRS-350 - Right.stl 1 Ea PSU Mean Well LRS-350 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea
psu_v2
36mm
Any
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-350 - Left HSI.stl 1 Ea Printed PSU Mount - LRS-350 - Right HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea PSU Mean Well LRS-350 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea"},{"location":"support/psu/#mean-well-lrs-450-series","title":"Mean Well LRS-450 Series","text":"StockHSI
psu_v2
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-450 - Left.stl 1 Ea Printed PSU Mount - LRS-450 - Right.stl 1 Ea PSU Mean Well LRS-450 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea
psu_v2
36mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-450 - Left HSI.stl 1 Ea Printed PSU Mount - LRS-450 - Right HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea PSU Mean Well LRS-450 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea"},{"location":"support/psu/#mean-well-lrs-600-series","title":"Mean Well LRS-600 Series","text":"StockHSI
psu_v2
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-600 - Left.stl 1 Ea Printed PSU Mount - LRS-600 - Right.stl 1 Ea PSU Mean Well LRS-600 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea
psu_v2
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - LRS-600 - Left HSI.stl 1 Ea Printed PSU Mount - LRS-600 - Right HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea PSU Mean Well LRS-600 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea"},{"location":"support/psu/#mean-well-rsp-200-series","title":"Mean Well RSP-200 Series","text":"Fit Test Pending: See Issue #137
StockHSI
psu_v2
36mm
Any
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - RSP-200 - Left.stl 1 Ea Printed PSU Mount - RSP-200 - Right.stl 1 Ea PSU Mean Well RSP-200 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea
psu_v2
36mm
Any
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - RSP-200 - Left HSI.stl 1 Ea Printed PSU Mount - RSP-200 - Right HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea PSU Mean Well RSP-200 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea"},{"location":"support/psu/#mean-well-rsp-500-series","title":"Mean Well RSP-500 Series","text":"StockHSI
psu_v2
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - RSP-500 - Left.stl 1 Ea Printed PSU Mount - RSP-500 - Right.stl 1 Ea PSU Mean Well RSP-500 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea
psu_v2
42mm
Rocker
General Notes
(None)
Materials
Type Part Qty Printed PSU Mount - RSP-500 - Left HSI.stl 1 Ea Printed PSU Mount - RSP-500 - Right HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea PSU Mean Well RSP-500 Series 1 Ea DIN 912 M4 x 6mm SHCS 4 Ea"},{"location":"support/rear/","title":"Rear Panels","text":"This page lists all side panels for OmniBox.
Rear panels serve many purposes.
"},{"location":"support/rear/#generic-no-fan","title":"Generic (No Fan)","text":"No USBUSB BUSB C
rear_v2
General Notes
(None)
Materials
Type Part Qty Printed Generic No USB.stl 1 Ea
rear_v2
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic Panel USB B.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea
rear_v2
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic Panel USB C.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea"},{"location":"support/rear/#generic-with-60mm-fan","title":"Generic with 60mm Fan","text":"No USBUSB BUSB C
rear_v2
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock.stl 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v2
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic USB B with Fan.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea DIN 912 M3 x 6mm SHCS 2 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v2
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Generic USB C with Fan.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea"},{"location":"support/rear/#generic-with-dual-60mm-fans","title":"Generic with Dual 60mm Fans","text":"No USBNo USB, HSIUSB AUSB A, HSIUSB BUSB B, HSIUSB CUSB C, HSI
rear_v3
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock.stl 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB A
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB A.stl 1 Ea Connector Extension USB 2 Type A Panel Mount 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB A
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB A.stl 1 Ea Connector Extension USB 2 Type A Panel Mount 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB B.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB B
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - HSI USB B.stl 1 Ea Connector Extension USB 2 Type B Panel Mount 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - Stock USB C.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea
rear_v3
USB C
General Notes
(None)
Materials
Type Part Qty Printed Rear Panel - Dual 60mm - HSI USB C.stl 1 Ea Connector Extension USB C Panel Mount Extension 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 60mm x 15mm Axial Fan 1 Ea DIN 912 M3 x 20mm SHCS 4 Ea Printed 6015 Fan Cage.stl 1 Ea Printed 6015 Fan Gasket.stl 1 Ea"},{"location":"support/side/","title":"Side Panels","text":"This page lists all side panels for OmniBox.
Side panels can mount CPU trays, fans, or connectors.
"},{"location":"support/side/#blank-side-panel","title":"Blank Side Panel","text":"side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel V2 - Blank.stl 1 Ea"},{"location":"support/side/#internal-40mm-fan","title":"Internal 40mm Fan","text":"OmniBox LogoOmniBox Logo, HSI
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 40mm Fan - OmniBox Logo.step 1 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 40mm Fan - OmniBox Logo - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 40mm x 10mm Axial Fan 1 Ea DIN 912 M3 x 12mm SHCS 4 Ea"},{"location":"support/side/#internal-50mm-fan","title":"Internal 50mm Fan","text":"Classic GrillClassic Grill, HSI
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 50mm Fan - Grill.stl 1 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea
side_v2
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - 50mm Fan - Grill - HSI.stl 1 Ea Other Fasteners M3 x 5mm OD x 4mm L Insert 4 Ea Fan 50mm x 12mm Axial Fan 1 Ea DIN 912 M3 x 16mm SHCS 4 Ea"},{"location":"support/side/#keystone-jacks","title":"Keystone Jacks","text":"side_v2
Keystone Jacks
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - Keystone - 3 Keys.stl 1 Ea"},{"location":"support/side/#rj-45-and-usb-panel-mounts","title":"RJ-45 and USB Panel Mounts","text":"1x RJ-45, 2x Single USB1x RJ-45, 1x Dual USB
side_v2
RJ-45, 2x USB B
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - RJ45 and 2x Single USB.stl 1 Ea Connector Extension USB 3 Type A Panel Mount 2 Ea Connector Extension RJ45 Panel Mount 1 Ea
side_v2
RJ-45, 2x USB B
General Notes
(None)
Materials
Type Part Qty Printed Side Panel - RJ45 and 1x Dual USB.stl 1 Ea Connector Extension RJ45 Panel Mount 1 Ea Connector Extension USB 3 Dual Panel Mount 1 Ea"},{"location":"upgrade/","title":"Upgrading Overview","text":"A finished OmniBox is an investment that can grow with your needs. The Core case is designed for flexibility and reuse, and every effort is made to avoid incompatibilities between versions.
"},{"location":"upgrade/#core-compatibility","title":"Core Compatibility","text":"Upgrading an OmniBox is typically done by upgrading the Main Body and retaining an old Base.
"},{"location":"upgrade/#v0981-and-earlier","title":"v0.9.8.1 and Earlier","text":"Releases prior to v0.9.9 cannot be partially upgraded and are considered deprecated.
"},{"location":"upgrade/#v099","title":"v0.9.9","text":"The Base is freely compatible with v0.9.10's Main Body. v0.9.11 is compatible aside from cosmetic differences.
"},{"location":"upgrade/#v0910","title":"v0.9.10","text":"v0.9.10 is compatible with v0.9.11 aside from cosmetic differences between Main Body and Base.
"},{"location":"upgrade/#tray-and-panel-compatibility","title":"Tray and Panel Compatibility","text":"See the Templates page for details.
"},{"location":"upgrade/templates/","title":"Templates","text":"As of v0.9.11, all trays and panels have templates. Most parts have STEP files available for modification, as well.
MCU Tray Template
"},{"location":"upgrade/templates/#cpu-tray","title":"CPU Tray","text":"Version Introduced Compatibility Notes cpu_v1 v0.9 v0.9 - v0.9.8.1 Deprecated. cpu_v2 v0.9.9 v0.9 - v0.9.10 cpu_v3 v0.9.11 v0.9.11 - Not compatible with v1 and 2.CPU Tray Template
"},{"location":"upgrade/templates/#psu-tray","title":"PSU Tray","text":"Version Introduced Compatibility Notes psu_v1 v0.9.9 v0.9.9 - v0.9.10 psu_v2 v0.9.11 v0.9.11 -TODO
A v2 template will be included with 0.9.11.
"},{"location":"upgrade/templates/#panels","title":"Panels","text":""},{"location":"upgrade/templates/#bottom-panel","title":"Bottom Panel","text":"Version Introduced Compatibility Notes bottom_v1 v0.9.9 v0.9.9 - v0.9.10 bottom_v2 v0.9.10 v0.9.9 - v0.9.10 Interchangeable with v1. bottom_v3 v0.9.11 v0.9.11 -Bottom Panel Template
"},{"location":"upgrade/templates/#display-panel","title":"Display Panel","text":"Version Introduced Compatibility Notes display_v1 v0.9 v0.9 - v0.9.7 Used M4 screws; deprecated. display_v2 v0.9.8 v0.9.8 - display_v3 v0.9.10 v0.9.8 - Lighter and faster print than v2.Display Panel Template
"},{"location":"upgrade/templates/#front-panel","title":"Front Panel","text":"Version Introduced Compatibility Notes fp_v1 v0.9 v0.9 -Front Panel Template
"},{"location":"upgrade/templates/#lid","title":"Lid","text":"Version Introduced Compatibility Notes lid_v1 v0.9 v0.9 - v0.9.5 Deprecated. lid_v2 v0.9.7 v0.9.7 -Lid Template
"},{"location":"upgrade/templates/#rear-panel","title":"Rear Panel","text":"Version Introduced Compatibility Notes rear_v1 v0.9 v0.9 - v0.9.7 Deprecated; uses M4 screws. rear_v2 v0.9.8 v0.9.8 - rear_v3 v0.9.10 v0.9.8 - Compatible with v2.Rear Panel Template
"},{"location":"upgrade/templates/#side-panel","title":"Side Panel","text":"Version Introduced Compatibility Notes side_v1 v0.9.9 v0.9.9 - v0.9.10 side_v3 v0.9.11 v0.9.11 - Version jumped to match CPU trays.Side Panel Template
"}]} \ No newline at end of file diff --git a/0.9.11/sitemap.xml b/0.9.11/sitemap.xml index d3590515..ec51f4df 100755 --- a/0.9.11/sitemap.xml +++ b/0.9.11/sitemap.xml @@ -2,232 +2,232 @@PETG Filament, 1kg
PLA+/PLA Pro F
Amazon.com (USA)
US
US
-Polymaker PolyLite PLA Pro
+
+
+Atomic Filament
+US
+US
+Atomic Light Gray PLA v2
+
+
+3DO.eu
+EU
+EU (DK)
+3DO PLA 2.0 Tough, Grey
@@ -7046,6 +7088,29 @@ Mean Well RS-25-5
Mean Well RSP-200 Series
+| Source | +Ships To | +Ships From | +Note | +
|---|---|---|---|
| Amazon.com (USA) | +US | +US | +RSP-200-24 | +
Mean Well RSP-500 Series
Bigtreetech 3.5" TFT E3
General Notes
(None)
Materials
| DIN 912 | M3 x 6mm SHCS | -2 Ea | +4 Ea | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1542,7 +1577,10 @@
| DIN 912 | M3 x 6mm SHCS | -2 Ea | +4 Ea | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1582,7 +1620,10 @@
| DIN 912 | M3 x 6mm SHCS | -2 Ea | +4 Ea | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1620,15 +1661,147 @@
| Type | +Part | +Qty | +
|---|---|---|
| Printed | +Front Panel - MicroSD, Keystone Jack, Hexagons.stl | +1 Ea | +
| DIN 912 | +M3 x 6mm SHCS | +4 Ea | +
| Printed | +MicroSD Extension Holder Body.stl | +1 Ea | +
| Printed | +MicroSD Extension Holder Cap.stl | +1 Ea | +
fp_v1
MicroSD, Keystone
General Notes
+Users will need to provide a keystone jack-compatible cable. This is not +included in the materials list.
+| Type | +Part | +Qty | +
|---|---|---|
| Printed | +Front Panel - MicroSD, Keystone Jack, Slats.stl | +1 Ea | +
| DIN 912 | +M3 x 6mm SHCS | +4 Ea | +
| Printed | +MicroSD Extension Holder Body.stl | +1 Ea | +
| Printed | +MicroSD Extension Holder Cap.stl | +1 Ea | +
fp_v1
MicroSD, Keystone
General Notes
+Users will need to provide a keystone jack-compatible cable. This is not +included in the materials list.
+| Type | +Part | +Qty | +
|---|---|---|
| Printed | +Front Panel - MicroSD, Keystone Jack, Slots.stl | +1 Ea | +
| DIN 912 | +M3 x 6mm SHCS | +4 Ea | +
| Printed | +MicroSD Extension Holder Body.stl | +1 Ea | +
| Printed | +MicroSD Extension Holder Cap.stl | +1 Ea | +
+
MicroSD and USB B Extensions
+fp_v1
MicroSD, USB B
General Notes
(None)
-
+| DIN 912 | M3 x 6mm SHCS | -4 Ea | +2 Ea | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1673,7 +1846,10 @@
| DIN 912 | M3 x 6mm SHCS | -4 Ea | +2 Ea | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1718,7 +1894,10 @@
| DIN 912 | M3 x 6mm SHCS | -4 Ea | +2 Ea | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1762,14 +1941,17 @@
| DIN 912 | M3 x 6mm SHCS | -4 Ea | +2 Ea | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1814,7 +1996,10 @@
| DIN 912 | M3 x 6mm SHCS | -4 Ea | +2 Ea | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1859,7 +2044,10 @@
| DIN 912 | M3 x 6mm SHCS | -4 Ea | +2 Ea | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Printed | @@ -1903,14 +2091,17 @@
| Type | +Part | +Qty | +
|---|---|---|
| Printed | +PSU Mount - LRS-450 - Left.stl | +1 Ea | +
| Printed | +PSU Mount - LRS-450 - Right.stl | +1 Ea | +
| PSU | +Mean Well LRS-450 Series | +1 Ea | +
| DIN 912 | +M4 x 6mm SHCS | +4 Ea | +
psu_v2
36mm
Rocker
General Notes
+(None)
+
+| Type | +Part | +Qty | +
|---|---|---|
| Printed | +PSU Mount - LRS-450 - Left HSI.stl | +1 Ea | +
| Printed | +PSU Mount - LRS-450 - Right HSI.stl | +1 Ea | +
| Other Fasteners | +M3 x 5mm OD x 4mm L Insert | +4 Ea | +
| PSU | +Mean Well LRS-450 Series | +1 Ea | +
| DIN 912 | +M4 x 6mm SHCS | +4 Ea | +
+
Mean Well LRS-600 Series
+psu_v2
42mm
Rocker
General Notes
+(None)
+
+| Type | +Part | +Qty | +
|---|---|---|
| Printed | +PSU Mount - LRS-600 - Left.stl | +1 Ea | +
| Printed | +PSU Mount - LRS-600 - Right.stl | +1 Ea | +
| PSU | +Mean Well LRS-600 Series | +1 Ea | +
| DIN 912 | +M4 x 6mm SHCS | +4 Ea | +
psu_v2
42mm
Rocker
General Notes
+(None)
+
+| Type | +Part | +Qty | +
|---|---|---|
| Printed | +PSU Mount - LRS-600 - Left HSI.stl | +1 Ea | +
| Printed | +PSU Mount - LRS-600 - Right HSI.stl | +1 Ea | +
| Other Fasteners | +M3 x 5mm OD x 4mm L Insert | +4 Ea | +
| PSU | +Mean Well LRS-600 Series | +1 Ea | +
| DIN 912 | +M4 x 6mm SHCS | +4 Ea | +
+
Mean Well RSP-200 Series
+Fit Test Pending: See Issue #137
+psu_v2
36mm
Any
General Notes
+(None)
+
+| Type | +Part | +Qty | +
|---|---|---|
| Printed | +PSU Mount - RSP-200 - Left.stl | +1 Ea | +
| Printed | +PSU Mount - RSP-200 - Right.stl | +1 Ea | +
| PSU | +Mean Well RSP-200 Series | +1 Ea | +
| DIN 912 | +M4 x 6mm SHCS | +4 Ea | +
psu_v2
36mm
Any
General Notes
+(None)
+
+| Type | +Part | +Qty | +
|---|---|---|
| Printed | +PSU Mount - RSP-200 - Left HSI.stl | +1 Ea | +
| Printed | +PSU Mount - RSP-200 - Right HSI.stl | +1 Ea | +
| Other Fasteners | +M3 x 5mm OD x 4mm L Insert | +4 Ea | +
| PSU | +Mean Well RSP-200 Series | +1 Ea | +
| DIN 912 | +M4 x 6mm SHCS | +4 Ea | +
+
Mean Well RSP-500 Series
+psu_v2
42mm
Rocker
General Notes
(None)
-
+
