Im using a dock able probe, cant get it to work with that config

[SvenixS]

Im using Klack Ender probe which is dockable and when the print starts on the probing sequence it fails to deploy the probe and i cant find a way to add a wrapper for it

[Dissfall]

Hi! I've found a possible solution. It's seems ugly but works for me.

Let me know if it works or does not works for you.

TL;DR

Add following configuration into your printer.cfg:

[gcode_macro list_macros]
description: Lists registered macros (and optionally show variable state).
  Usage: LISTVARS SEARCH=<search_string> VARS=<0|1> SILENT=<0|1>
variable_macros: {}
gcode:
  # Load the config state once and save it.
  {% if not macros %}
    {% set renames = {} %}
    {% for k in printer.configfile.config %}
      {% if k.lower().startswith("gcode_macro") and
            printer.configfile.config[k].rename_existing and not k.lower().endswith("bed_mesh_calibrate") %}
          {% set name = k.split(None, 1)[1] | lower %}
          {% set dummy = renames.__setitem__(name,
                          [printer.configfile.config[k].rename_existing|lower] +
                            renames[name]|default([])) %}
      {% endif %}
    {% endfor %}
    {% for k in printer %}
      {% if k.lower().startswith("gcode_macro") %}
        {% set name = k.split(None, 1)[1] | lower %}
        {% set dummy = macros.__setitem__(name, renames[name]|default([])) %}
      {% endif %}
    {% endfor %}
  {% endif %}

  {% if params.SILENT|default(0)|int == 0 %}
    _LIST_MACROS_DISPLAY {rawparams}
  {% endif %}

[gcode_macro BED_MESH_CALIBRATE]
rename_existing: BED_MESH_CALIBRATE_1
gcode:
  PROBE_OUT
  BED_MESH_CALIBRATE_1
  PROBE_IN

Explanation

Klipper-macros by default uses macro called BED_MESH_CALIBRATE_FAST that uses build-in macro BED_MESH_CALIBRATE.

If we have a look at the definition of the BED_MESH_CALIBRATE_FAST we can see that it uses utility macro list_macros that lists all macros and it's names if they was renamed. This way BED_MESH_CALIBRATE_FAST uses only original definition of BED_MESH_CALIBRATE. You can even see comment about this:

klipper-macros/bed_mesh_fast.cfg

Lines 15 to 18 in 01c0d8a

	# Find the real bed_mesh_calibrate command.
	{% set calibrate_cmd =
	(printer["gcode_macro list_macros"].macros.bed_mesh_calibrate|
	default(["bed_mesh_calibrate"],True))[-1] %}

Thus if we will try to redefine BED_MESH_CALIBRATE and add our PROBE_OUT and PROBE_IN , BED_MESH_CALIBRATE will use original definition anyways.

[gcode_macro BED_MESH_CALIBRATE]
rename_existing: BED_MESH_CALIBRATE_1
gcode:
  PROBE_OUT
  BED_MESH_CALIBRATE_1
  PROBE_IN

So the only way I've found to change this behavior is to redefine list_macros and make it ignore that BED_MESH_CALIBRATE was renamed.

To be able to do that we should change the conditional statement here:

klipper-macros/globals.cfg

Lines 425 to 426 in 01c0d8a

	{% if k.lower().startswith("gcode_macro") and
	printer.configfile.config[k].rename_existing %}

And make it look like that:

            printer.configfile.config[k].rename_existing and not k.lower().endswith("bed_mesh_calibrate") %}
          {% set name = k.split(None, 1)[1] | lower %}

Full declaration of the macro you can see in the beginning.