Common Alternate Layouts

Dvorak

This is the default Dvorak layout for the Model 01:

To switch from QWERTY to DVORAK you will need to do two things.

First, replace this keymap:

  [QWERTY] = KEYMAP_STACKED
  (___,          Key_1, Key_2, Key_3, Key_4, Key_5, Key_LEDEffectNext,
   Key_Backtick, Key_Q, Key_W, Key_E, Key_R, Key_T, Key_Tab,
   Key_PageUp,   Key_A, Key_S, Key_D, Key_F, Key_G,
   Key_PageDown, Key_Z, Key_X, Key_C, Key_V, Key_B, Key_Escape,
   Key_LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
   ShiftToLayer(FUNCTION),

   M(MACRO_ANY),  Key_6, Key_7, Key_8,     Key_9,         Key_0,         Key_KeypadNumLock,
   Key_Enter,     Key_Y, Key_U, Key_I,     Key_O,         Key_P,         Key_Equals,
                  Key_H, Key_J, Key_K,     Key_L,         Key_Semicolon, Key_Quote,
   Key_RightAlt,  Key_N, Key_M, Key_Comma, Key_Period,    Key_Slash,     Key_Minus,
   Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
   ShiftToLayer(FUNCTION)),

With this one:

  [DVORAK] = KEYMAP_STACKED
  (
    ___,          Key_1,         Key_2,     Key_3,      Key_4, Key_5, Key_LEDEffectNext,
    Key_Backtick, Key_Quote,     Key_Comma, Key_Period, Key_P, Key_Y, TD(TD_BRACES),
    Key_PageUp,   Key_A,         Key_O,     Key_E,      Key_U, Key_I,
    Key_PageDown, Key_Semicolon, Key_Q,     Key_J,      Key_K, Key_X, Key_Escap,
       LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
          ShiftToLayer(FUNCTION),

    M(MACRO_ANY), Key_6, Key_7, Key_8, Key_9, Key_0, Key_KeypadNumLock,
    Key_Enter,    Key_F, Key_G, Key_C, Key_R, Key_L, Key_Slash,
                  Key_D, Key_H, Key_T, Key_N, Key_S, Key_Minus,
    Key_RightAlt, Key_B, Key_M, Key_W, Key_V, Key_Z, Key_Equals,
      Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
            ShiftToLayer(FUNCTION)

Next, replace this enum:

enum { QWERTY, FUNCTION, NUMPAD };

with this one:

enum { DVORAK, FUNCTION, NUMPAD };

Then flash the firmware to your Model 01 following these instructions, and you'll be all set!

Colemak

This is the default Colemak layout for the Model 01:

To switch from QWERTY to COLEMAK you will need to do two things.

First, replace this keymap:

  [QWERTY] = KEYMAP_STACKED
  (___,          Key_1, Key_2, Key_3, Key_4, Key_5, Key_LEDEffectNext,
   Key_Backtick, Key_Q, Key_W, Key_E, Key_R, Key_T, Key_Tab,
   Key_PageUp,   Key_A, Key_S, Key_D, Key_F, Key_G,
   Key_PageDown, Key_Z, Key_X, Key_C, Key_V, Key_B, Key_Escape,
   Key_LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
   ShiftToLayer(FUNCTION),

   M(MACRO_ANY),  Key_6, Key_7, Key_8,     Key_9,         Key_0,         Key_KeypadNumLock,
   Key_Enter,     Key_Y, Key_U, Key_I,     Key_O,         Key_P,         Key_Equals,
                  Key_H, Key_J, Key_K,     Key_L,         Key_Semicolon, Key_Quote,
   Key_RightAlt,  Key_N, Key_M, Key_Comma, Key_Period,    Key_Slash,     Key_Minus,
   Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
   ShiftToLayer(FUNCTION)),

With this one:

  [COLEMAK] = KEYMAP_STACKED
  (___,          Key_1, Key_2, Key_3, Key_4, Key_5, Key_LEDEffectNext,
   Key_Backtick, Key_Q, Key_W, Key_F, Key_P, Key_G, Key_Tab,
   Key_PageUp,   Key_A, Key_R, Key_S, Key_T, Key_D,
   Key_PageDown, Key_Z, Key_X, Key_C, Key_V, Key_B, Key_Escape,
   Key_LeftControl, Key_Backspace, Key_LeftGui, Key_LeftShift,
   ShiftToLayer(FUNCTION),

   M(MACRO_ANY),  Key_6, Key_7, Key_8,     Key_9,         Key_0,         Key_KeypadNumLock,
   Key_Enter,     Key_J, Key_L, Key_U,     Key_Y,         Key_Semicolon, Key_Equals,
                  Key_H, Key_N, Key_E,     Key_I,         Key_O,         Key_Quote,
   Key_RightAlt,  Key_K, Key_M, Key_Comma, Key_Period,    Key_Slash,     Key_Minus,
   Key_RightShift, Key_LeftAlt, Key_Spacebar, Key_RightControl,
   ShiftToLayer(FUNCTION)),

Next, replace this enum:

enum { QWERTY, FUNCTION, NUMPAD };

with this one:

enum { COLEMAK, FUNCTION, NUMPAD };

Then flash the firmware to your Model 01 following these instructions, and you'll be all set!