gtp_example.cfg

# Config for C++ (non-python) gtp bot

# RUNNING ON AN ONLINE SERVER OR IN A REAL TOURNAMENT OR MATCH:
# If you plan to do so, you may want to read through the "Rules" section
# below carefully for proper handling of komi and handicap games and end-of-game cleanup
# and various other details.

# NOTES ABOUT PERFORMANCE AND MEMORY USAGE:
# You will likely want to tune one or more the following:
#
# numSearchThreads:
# The number of CPU threads to use. If your GPU is powerful, it can actually be much higher than
# the number of cores on your processor because you will need many threads to feed large enough
# batches to make good use of the GPU.
#
# The "./katago benchmark" command can help you tune this parameter, as well as to test out the effect
# of changes to any of the other parameters below!
#
# nnCacheSizePowerOfTwo:
# This controls the NN Cache size, which is the primary RAM/memory use.
# Increase this if you don't mind the memory use and want better performance for searches with
# tens of thousands of visits or more. Decrease this if you want to limit memory usage.
#
# If you're someone who is happy to do a bit of math - each neural net entry takes very
# approximately 1.5KB, except when using whole-board ownership/territory visualizations, each
# entry will take very approximately 3KB. The number of entries is (2 ** nnCacheSizePowerOfTwo),
# for example 2 ** 18 = 262144.
#
# OTHER NOTES:
# If you have more than one GPU, take a look at "OpenCL GPU settings" or "CUDA GPU settings" below.
#
# If using OpenCL, you will want to verify that KataGo is picking up the correct device!
# (e.g. some systems may have both an Intel CPU OpenCL and GPU OpenCL, if KataGo appears to pick
# the wrong one, you correct this by specifying "openclGpuToUse" below).
#
# You may also want to adjust "maxVisits", "ponderingEnabled", "resignThreshold", and possibly
# other parameters depending on your intended usage.
#
# ----------------------------------------------------------------------------------------

# For the `katago gtp` command, ALL of THE BELOW VALUES MAY BE SET OR OVERRIDDEN if desired via
# the command line arguments:
# -override-config KEY=VALUE,KEY=VALUE,...

# Logs and files--------------------------------------------------------------------------

# Where to output log?
logDir = gtp_logs    # Each run of KataGo will log to a separate file in this dir
# logFile = gtp.log  # Use this instead of logDir to just specify a single file directly

# Logging options
logAllGTPCommunication = true
logSearchInfo = true
logToStderr = false

# KataGo will display some info to stderr on GTP startup
# Uncomment this to suppress that and remain silent
# startupPrintMessageToStderr = false

# Chat some stuff to stderr, for use in things like malkovich chat to OGS.
# ogsChatToStderr = true

# Optionally override where KataGo will attempt to save things like openCLTuner files and other cached data.
# homeDataDir = DIRECTORY

# Analysis------------------------------------------------------------------------------------

# Configure the maximum length of analysis printed out by lz-analyze and other places.
# Controls the number of moves after the first move in a variation.
# analysisPVLen = 15

# Report winrates for chat and analysis as (BLACK|WHITE|SIDETOMOVE).
# Default is SIDETOMOVE, which is what tools that use LZ probably also expect
# reportAnalysisWinratesAs = SIDETOMOVE

# Uncomment and and set to a positive value to make KataGo explore the top move(s) less deeply and accurately,
# but explore and give evaluations to a greater variety of moves, for analysis (does NOT affect play).
# A value like 0.03 or 0.06 will give various mildly but still noticeably wider searches.
# An extreme value like 1 will distribute many playouts across every move on the board, even very bad moves.
# analysisWideRootNoise = 0.0


# Default rules------------------------------------------------------------------------------------
# See https://lightvector.github.io/KataGo/rules.html for a description of the rules.
# These rules are defaults and can be changed mid-run by several custom GTP commands.
# See https://github.com/lightvector/KataGo/blob/master/docs/GTP_Extensions.md for those commands.

# Some other legal values are: "chinese", "japanese", "korean", "aga", "chinese-ogs", "new-zealand".
# KataGo does not claim to exactly match any particular human ruleset, but KataGo will try to behave
# as closely as possible given the rules it has implemented.
rules = tromp-taylor

# Use the below instead to specify an arbitrary combination of individual rules.

# koRule = SIMPLE       # Simple ko rules (triple ko = no result)
# koRule = POSITIONAL   # Positional superko
# koRule = SITUATIONAL  # Situational superko

# scoringRule = AREA       # Area scoring
# scoringRule = TERRITORY  # Territory scoring (uses a sort of special computer-friendly territory ruleset)

# taxRule = NONE  # All surrounded empty points are scored
# taxRule = SEKI  # Eyes in seki do NOT count as points
# taxRule = ALL   # All groups are taxed up to 2 points for the two eyes needed to live

# multiStoneSuicideLegal = true  #Is multiple-stone suicide legal? (Single-stone suicide is always illegal).

# hasButton = false # Set to true when area scoring to award 0.5 points to the first pass.

# whiteHandicapBonus = 0    # In handicap games, give white no compensation for black's handicap stones (Tromp-taylor, NZ, JP)
# whiteHandicapBonus = N-1  # In handicap games, give white N-1 points for black's handicap stones (AGA)
# whiteHandicapBonus = N    # In handicap games, give white N points for black's handicap stones (Chinese)

# Uncomment and change to adjust what board size KataGo uses upon startup by default if GTP doesn't specify.
# defaultBoardSize = 19

# Bot behavior---------------------------------------------------------------------------------------

# Resignation -------------

# Resignation occurs if for at least resignConsecTurns in a row,
# the winLossUtility (which is on a [-1,1] scale) is below resignThreshold.
allowResignation = true
resignThreshold = -0.90
resignConsecTurns = 3
# Uncomment to make katago not resign close games, behind by fewer than this many points
# resignMinScoreDifference = 10

# Handicap -------------

# Assume that if black makes many moves in a row right at the start of the game, then the game is a handicap game.
# This is necessary on some servers and for some GUIs and also when initializing from many SGF files, which may
# set up a handicap game using repeated GTP "play" commands for black rather than GTP "place_free_handicap" commands.
# However, it may also lead to incorrect understanding of komi if whiteHandicapBonus is used and a server does NOT
# have such a practice.
# Defaults to true! Uncomment and set to false to disable this behavior.
# assumeMultipleStartingBlackMovesAreHandicap = true

# Makes katago dynamically adjust in handicap or altered-komi games to assume based on those game settings that it
# must be stronger or weaker than the opponent and to play accordingly. Greatly improves handicap
# strength by biasing winrates and scores to favor appropriate safe/aggressive play.
# Does NOT affect analysis (lz-analyze, kata-analyze, used by programs like Lizzie) so analysis remains unbiased.
# Uncomment and set this to 0 to disable this and make KataGo play the same always.
# dynamicPlayoutDoublingAdvantageCapPerOppLead = 0.045

# Instead of a dynamic level, you can uncomment this and set this to a value from -3.0 to 3.0 to set KataGo's aggression to a FIXED level.
# DOES affect analysis tools (lz-analyze, kata-analyze, used by programs like Lizzie).
# Negative makes KataGo behave as if it is much weaker than the opponent, preferring to play defensively.
# Positive makes KataGo behave as if it is much stronger than the opponent, prefering to play aggressively or even overplay slightly.
# If this and "dynamicPlayoutDoublingAdvantageCapPerOppLead" are BOTH set then dynamic will be used for all games and this fixed
# value will be used for analysis tools.
# playoutDoublingAdvantage = 0.0

# Uncommenting one of these will enforce that the FIXED playoutDoublingAdvantage will only apply when KataGo plays the specified color
# and will be negated when playing the opposite color.
# playoutDoublingAdvantagePla = BLACK
# playoutDoublingAdvantagePla = WHITE

# Passing and cleanup -------------

# Make the bot never assume that its pass will end the game, even if passing would end and "win" under Tromp-Taylor rules.
# Usually this is a good idea when using it for analysis or playing on servers where scoring may be implemented non-tromp-taylorly.
# Defaults to true! Uncomment and set to false to disable this.
# conservativePass = true

# When using territory scoring, self-play games continue beyond two passes with special cleanup
# rules that may be confusing for human players. This option prevents the special cleanup phases from being
# reachable when using the bot for GTP play.
# Defaults to true! Uncomment and set to false if you want KataGo to be able to enter special cleanup.
# For example, if you are testing it against itself, or against another bot that has precisely implemented the rules
# documented at https://lightvector.github.io/KataGo/rules.html
# preventCleanupPhase = true

# Misc Behavior --------------------

# Uncomment and set to true to make KataGo avoid a particular joseki that some KataGo nets misevaluate,
# and also to improve opening diversity versus some particular other bots that like to play it all the time.
# avoidMYTDaggerHack = false

# Search limits-----------------------------------------------------------------------------------

# For all of "maxVisits", "maxPlayouts", "maxTime", search will still try to follow GTP time controls and may make a move
# faster than the specified max if GTP tells it that it is playing under a clock as well in the current game.

# If provided, limit maximum number of root visits per search to this much. (With tree reuse, visits do count earlier search)
maxVisits = 500
# If provided, limit maximum number of new playouts per search to this much. (With tree reuse, playouts do not count earlier search)
# maxPlayouts = 300
# If provided, cap search time at this many seconds.
# maxTime = 10

# Ponder on the opponent's turn?
ponderingEnabled = false
maxTimePondering = 60  # Maximum time to ponder, in seconds. Comment out to make unlimited.
# Note: you can set "maxVisitsPondering" or "maxPlayoutsPondering" too.

# Number of seconds to buffer for lag for GTP time controls - will move a bit faster assuming there is this much lag per move.
lagBuffer = 1.0

# Number of threads to use in search
numSearchThreads = 6

# Play a little faster if the opponent is passing, for friendliness
searchFactorAfterOnePass = 0.50
searchFactorAfterTwoPass = 0.25
# Play a little faster if super-winning, for friendliness
searchFactorWhenWinning = 0.40
searchFactorWhenWinningThreshold = 0.95

# GPU Settings-------------------------------------------------------------------------------

# Maximum number of positions to send to a single GPU at once.
# The default value here is roughly equal to numSearchThreads, but you can specify it manually
# if you are running out of memory, or if you are using multiple GPUs that expect to split
# up the work.
# nnMaxBatchSize = <integer>

# Cache up to (2 ** this) many neural net evaluations in case of transpositions in the tree.
# Uncomment and edit to change if you want to adjust a major component of KataGo's RAM usage.
# nnCacheSizePowerOfTwo = 20

# Size of mutex pool for nnCache is (2 ** this).
# nnMutexPoolSizePowerOfTwo = 16

# Randomize board orientation when running neural net evals? Uncomment and set to false to disable.
# nnRandomize = true
# If provided, force usage of a specific seed for nnRandomize instead of randomizing.
# nnRandSeed = abcdefg

# TO USE MULTIPLE GPUS:
# Set this to the number of GPUs you have and/or would like to use.
# **AND** if it is more than 1, uncomment the appropriate CUDA or OpenCL section below.
# numNNServerThreadsPerModel = 1

# CUDA GPU settings--------------------------------------
# These only apply when using the CUDA version of KataGo.

# IF USING ONE GPU: optionally uncomment and change this if the GPU you want to use turns out to be not device 0
# cudaDeviceToUse = 0

# IF USING TWO GPUS: Uncomment these two lines (AND set numNNServerThreadsPerModel above):
# cudaDeviceToUseThread0 = 0  # change this if the first GPU you want to use turns out to be not device 0
# cudaDeviceToUseThread1 = 1  # change this if the second GPU you want to use turns out to be not device 1

# IF USING THREE GPUS: Uncomment these three lines (AND set numNNServerThreadsPerModel above):
# cudaDeviceToUseThread0 = 0  # change this if the first GPU you want to use turns out to be not device 0
# cudaDeviceToUseThread1 = 1  # change this if the second GPU you want to use turns out to be not device 1
# cudaDeviceToUseThread2 = 2  # change this if the third GPU you want to use turns out to be not device 2

# You can probably guess the pattern if you have four, five, etc. GPUs.

# KataGo will automatically use FP16 or not based on the compute capability of your NVIDIA GPU. If you
# want to try to force a particular behavior though you can uncomment these lines and change them
# to "true" or "false". E.g. it's using FP16 but on your card that's giving an error, or it's not using
# FP16 but you think it should.
# cudaUseFP16 = auto
# cudaUseNHWC = auto


# OpenCL GPU settings--------------------------------------
# These only apply when using the OpenCL version of KataGo.

# Uncomment to tune OpenCL for every board size separately, rather than only the largest possible size
# openclReTunePerBoardSize = true

# IF USING ONE GPU: optionally uncomment and change this if the best device to use is guessed incorrectly.
# The default behavior tries to guess the 'best' GPU or device on your system to use, usually it will be a good guess.
# openclDeviceToUse = 0

# IF USING TWO GPUS: Uncomment these two lines and replace X and Y with the device ids of the devices you want to use.
# It might NOT be 0 and 1, some computers will have many OpenCL devices. You can see what the devices are when
# KataGo starts up - it should print or log all the devices it finds.
# (AND also set numNNServerThreadsPerModel above)
# openclDeviceToUseThread0 = X
# openclDeviceToUseThread1 = Y

# IF USING THREE GPUS: Uncomment these three lines and replace X and Y and Z with the device ids of the devices you want to use.
# It might NOT be 0 and 1 and 2, some computers will have many OpenCL devices. You can see what the devices are when
# KataGo starts up - it should print or log all the devices it finds.
# (AND also set numNNServerThreadsPerModel above)
# openclDeviceToUseThread0 = X
# openclDeviceToUseThread1 = Y
# openclDeviceToUseThread2 = Z

# You can probably guess the pattern if you have four, five, etc. GPUs.


# Root move selection and biases------------------------------------------------------------------------------
# Uncomment and edit any of the below values to change them from their default.

# If provided, force usage of a specific seed for various things in the search instead of randomizing
# searchRandSeed = hijklmn

# Temperature for the early game, randomize between chosen moves with this temperature
# chosenMoveTemperatureEarly = 0.5
# Decay temperature for the early game by 0.5 every this many moves, scaled with board size.
# chosenMoveTemperatureHalflife = 19
# At the end of search after the early game, randomize between chosen moves with this temperature
# chosenMoveTemperature = 0.10
# Subtract this many visits from each move prior to applying chosenMoveTemperature
# (unless all moves have too few visits) to downweight unlikely moves
# chosenMoveSubtract = 0
# The same as chosenMoveSubtract but only prunes moves that fall below the threshold, does not affect moves above
# chosenMovePrune = 1

# Number of symmetries to sample (WITH replacement) and average at the root
# rootNumSymmetriesToSample = 1

# Using LCB for move selection?
# useLcbForSelection = true
# How many stdevs a move needs to be better than another for LCB selection
# lcbStdevs = 5.0
# Only use LCB override when a move has this proportion of visits as the top move
# minVisitPropForLCB = 0.15

# Internal params------------------------------------------------------------------------------
# Uncomment and edit any of the below values to change them from their default.

# Scales the utility of winning/losing
# winLossUtilityFactor = 1.0
# Scales the utility for trying to maximize score
# staticScoreUtilityFactor = 0.10
# dynamicScoreUtilityFactor = 0.30
# Adjust dynamic score center this proportion of the way towards zero, capped at a reasonable amount.
# dynamicScoreCenterZeroWeight = 0.20
# dynamicScoreCenterScale = 0.75
# The utility of getting a "no result" due to triple ko or other long cycle in non-superko rulesets (-1 to 1)
# noResultUtilityForWhite = 0.0
# The number of wins that a draw counts as, for white. (0 to 1)
# drawEquivalentWinsForWhite = 0.5

# Exploration constant for mcts
# cpuctExploration = 0.9
# cpuctExplorationLog = 0.4
# FPU reduction constant for mcts
# fpuReductionMax = 0.2
# rootFpuReductionMax = 0.1
# Use parent average value for fpu base point instead of point value net estimate
# fpuUseParentAverage = true
# Amount to apply a downweighting of children with very bad values relative to good ones
# valueWeightExponent = 0.5
# Slight incentive for the bot to behave human-like with regard to passing at the end, filling the dame,
# not wasting time playing in its own territory, etc, and not play moves that are equivalent in terms of
# points but a bit more unfriendly to humans.
# rootEndingBonusPoints = 0.5
# Make the bot prune useless moves that are just prolonging the game to avoid losing yet
# rootPruneUselessMoves = true

# How big to make the mutex pool for search synchronization
# mutexPoolSize = 16384
# How many virtual losses to add when a thread descends through a node
# numVirtualLossesPerThread = 1