Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Test various power supplies #40

Open
meeDamian opened this issue Feb 24, 2019 · 8 comments
Open

Test various power supplies #40

meeDamian opened this issue Feb 24, 2019 · 8 comments

Comments

@meeDamian
Copy link
Member

Buy different ones, and try to abuse them. See which ones handle apocalypse the best.

@AnotherDroog
Copy link
Member

AnotherDroog commented Feb 24, 2019

  • Official Raspberry PSU (5.1V 3A) is good

  • One bought at Computer Plaza for 79 baht is not good enough, undervoltage with 3 USB sticks attached. 1.5A, 5V

  • Bought one at 7-Eleven, 200 baht, 2A, 5V, works okay

@meeDamian
Copy link
Member Author

I was primarily referring to what @noaho mentioned during our meeting in Cube7: Test how these power supplies would handle abuse in a form of power spikes etc.

@noaho
Copy link

noaho commented Feb 24, 2019

Perhaps we can research electrical testing certifications and only use chargers approved by certain schemes? Setting up an electronics testing lab is bit out of scope for us..

@meeDamian
Copy link
Member Author

Right, that's much faster, cheaper and better 😅.

@AnotherDroog
Copy link
Member

Not sure about certifications we can rely on, especially with all the knock-offs and garbage around.

We can do our own tests:

  • test voltage is >4.8V (undervoltage cutoff)
  • check there is 2A of current available

@noaho
Copy link

noaho commented Feb 24, 2019

My point was that a lot of these chargers are cheaply made, and might go open circuit (eg 220V all the way to the USB port) if they fail/get exposed to a surge, etc and blow up everything connected.

But my real point was that we can't rely on connected USB drives for funds backup - it wasn't about hardware reliability. Even good chargers can die.

@noaho
Copy link

noaho commented Feb 25, 2019

Maybe another thing we can do, is expose to the user when the power throttling is being hit on the pi, either by email notification or dashboard notification.

You could also argue that the Pi does a really good job of throttling, and it shouldn’t be that much slower if they use a lower amperage PSU..

@AnotherDroog
Copy link
Member

Yes great idea, undervoltage detection will need #78 to work

@AnotherDroog AnotherDroog transferred this issue from lncm/pi-factory Apr 27, 2019
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants