| title | description | addedAt | pageClass |
|---|---|---|---|
AduroSmart 15090054 control via MQTT |
Integrate your AduroSmart 15090054 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway. |
2019-11-09 18:37:38 UTC |
device-page |
| Model | 15090054 |
| Vendor | AduroSmart |
| Description | Remote scene controller |
| Exposes | battery, action, linkquality |
| Picture |  |
To reset the device: Press 1+3 until the green led turns on To link it with Z2M: Keep 2+3 pressed. The negotiation will take a while, don't stop after the first log entry or the device will stay as "unknown".
Remaining battery in %, can take up to 24 hours before reported..
Value can be found in the published state on the battery property.
It's not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 100.
The unit of this value is %.
Triggered action (e.g. a button click).
Value can be found in the published state on the action property.
It's not possible to read (/get) or write (/set) this value.
The possible values are: toggle, recall_253, recall_254, recall_255.
Link quality (signal strength).
Value can be found in the published state on the linkquality property.
It's not possible to read (/get) or write (/set) this value.
The minimal value is 0 and the maximum value is 255.
The unit of this value is lqi.