manual-update.md

Manual Update

Klipper

Update from Repository

cd ~/klipper
git pull

Restart Klipper (sudo service klipper restart) and check the klippy.log, if Klipper starts correctly and then continue the guide.

Update Klipper dependences

This is only necessary, if you see missing modules in the Klipper log.

./klippy-env/bin/pip install -r ./klipper/scripts/klippy-requirements.txt

Klipper config changes

If you have issues after update your Klipper instance, you can check config changes here.

Moonraker

cd ~/moonraker
git pull

Restart Moonraker (sudo service moonraker restart) and open the URL http://<printer-ip>:7125/printer/info in your browser.

If you see a content like this

{"result": {"hostname": "voron250", "error_detected": false, "version": "v0.8.0-643-g528f9f25", "is_ready": true, "message": "Printer is ready", "cpu": "4 core ARMv7 Processor rev 4 (v7l)"}}

Update Moonraker dependences

This is only necessary, if you see missing modules in the Moonraker log.

~/moonraker/scripts/install-moonraker.sh -r

Moonraker config changes

If you have issues after update your Moonraker instance, you can check config changes here.

Mainsail

cd ~/mainsail
rm -R ./*
wget -q -O mainsail.zip https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip && unzip mainsail.zip && rm mainsail.zip

Now it should be possible to open the interface: http://<printer-ip>/.