Tutorial : Simple input (push button)
If you do not know how to create a new project have a look to the tutorial How to create a new project ?.
In this tutorial we will see how to use a push button to set an LED on/off with the Arduino Designer.
In this example we use the Arduino Uno platform and hardware components from the DFRobot Ardublock kit.
The hardware is defined as below :
The DFRduino Uno R3 platform is used, the blue LED module is connected to the digital pin 13 and the push button is connected to the digital pin 0 of the Arduino board.
In the sketch, we use the blue LED as a Level module and we connect the push button sensor as an entry to the blue LED.
Finally, click on the Upload button from the toolbar to upload the code to the Arduino board.
The source of this example are available in : https://github.com/mbats/arduino/tree/master/examples/fr.obeo.dsl.arduino.examples.simpleinput