Support for the ClimateGuard RadSens Geiger-Muller tube

src/configuration.h

@@ -148,6 +148,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define NAU7802_ADDR 0x2A
 #define MAX30102_ADDR 0x57
 #define MLX90614_ADDR_DEF 0x5A
+#define CGRADSENS_ADDR 0x66
 
 // -----------------------------------------------------------------------------
 // ACCELEROMETER

src/detect/ScanI2C.h

@@ -63,7 +63,8 @@ class ScanI2C
         ICM20948,
         MAX30102,
         TPS65233,
-        MPR121KB
+        MPR121KB,
+        CGRADSENS
     } DeviceType;
 
     // typedef uint8_t DeviceAddress;

src/detect/ScanI2CTwoWire.cpp

@@ -479,6 +479,16 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
                 }
                 break;
 
+            case CGRADSENS_ADDR:
+                // Register 0x00 of the RadSens sensor contains is product identifier 0x7D
+                registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
+                if (registerValue == 0x7D) {
+                    type = CGRADSENS;
+                    LOG_INFO("ClimateGuard RadSens Geiger-Muller Sensor found");
+                    break;
+                }
+                break;
+
             default:
                 LOG_INFO("Device found at address 0x%x was not able to be enumerated", addr.address);
             }

src/main.cpp

@@ -614,6 +614,7 @@ void setup()
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::DFROBOT_LARK, meshtastic_TelemetrySensorType_DFROBOT_LARK)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::ICM20948, meshtastic_TelemetrySensorType_ICM20948)
     SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MAX30102, meshtastic_TelemetrySensorType_MAX30102)
+    SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::CGRADSENS, meshtastic_TelemetrySensorType_RADSENS)
 
     i2cScanner.reset();
 #endif

src/modules/Telemetry/EnvironmentTelemetry.cpp

@@ -25,6 +25,7 @@
 #include "Sensor/BMP085Sensor.h"
 #include "Sensor/BMP280Sensor.h"
 #include "Sensor/BMP3XXSensor.h"
+#include "Sensor/CGRadSensSensor.h"
 #include "Sensor/DFRobotLarkSensor.h"
 #include "Sensor/LPS22HBSensor.h"
 #include "Sensor/MCP9808Sensor.h"
@@ -60,6 +61,7 @@ BMP3XXSensor bmp3xxSensor;
 #ifdef T1000X_SENSOR_EN
 T1000xSensor t1000xSensor;
 #endif
+CGRadSensSensor cgRadSens;
 
 #define FAILED_STATE_SENSOR_READ_MULTIPLIER 10
 #define DISPLAY_RECEIVEID_MEASUREMENTS_ON_SCREEN true
@@ -147,6 +149,8 @@ int32_t EnvironmentTelemetryModule::runOnce()
                 result = nau7802Sensor.runOnce();
             if (max17048Sensor.hasSensor())
                 result = max17048Sensor.runOnce();
+            if (cgRadSens.hasSensor())
+                result = cgRadSens.runOnce();
 #endif
         }
         return result;
@@ -210,16 +214,19 @@ void EnvironmentTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiSt
     // Display "Env. From: ..." on its own
     display->drawString(x, y, "Env. From: " + String(lastSender) + "(" + String(agoSecs) + "s)");
 
-    String last_temp = String(lastMeasurement.variant.environment_metrics.temperature, 0) + "°C";
-    if (moduleConfig.telemetry.environment_display_fahrenheit) {
-        last_temp =
-            String(UnitConversions::CelsiusToFahrenheit(lastMeasurement.variant.environment_metrics.temperature), 0) + "°F";
-    }
+    if (lastMeasurement.variant.environment_metrics.has_temperature ||
+        lastMeasurement.variant.environment_metrics.has_relative_humidity) {
+        String last_temp = String(lastMeasurement.variant.environment_metrics.temperature, 0) + "°C";
+        if (moduleConfig.telemetry.environment_display_fahrenheit) {
+            last_temp =
+                String(UnitConversions::CelsiusToFahrenheit(lastMeasurement.variant.environment_metrics.temperature), 0) + "°F";
+        }
 
-    // Continue with the remaining details
-    display->drawString(x, y += _fontHeight(FONT_SMALL),
-                        "Temp/Hum: " + last_temp + " / " +
-                            String(lastMeasurement.variant.environment_metrics.relative_humidity, 0) + "%");
+        // Continue with the remaining details
+        display->drawString(x, y += _fontHeight(FONT_SMALL),
+                            "Temp/Hum: " + last_temp + " / " +
+                                String(lastMeasurement.variant.environment_metrics.relative_humidity, 0) + "%");
+    }
 
     if (lastMeasurement.variant.environment_metrics.barometric_pressure != 0) {
         display->drawString(x, y += _fontHeight(FONT_SMALL),
@@ -243,6 +250,10 @@ void EnvironmentTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiSt
     if (lastMeasurement.variant.environment_metrics.weight != 0)
         display->drawString(x, y += _fontHeight(FONT_SMALL),
                             "Weight: " + String(lastMeasurement.variant.environment_metrics.weight, 0) + "kg");
+
+    if (lastMeasurement.variant.environment_metrics.radiation != 0)
+        display->drawString(x, y += _fontHeight(FONT_SMALL),
+                            "Rad: " + String(lastMeasurement.variant.environment_metrics.radiation, 2) + "µR/h");
 }
 
 bool EnvironmentTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
@@ -263,6 +274,8 @@ bool EnvironmentTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPac
                  t->variant.environment_metrics.wind_speed, t->variant.environment_metrics.wind_direction,
                  t->variant.environment_metrics.weight);
 
+        LOG_INFO("(Received from %s): radiation=%fµR/h", sender, t->variant.environment_metrics.radiation);
+
 #endif
         // release previous packet before occupying a new spot
         if (lastMeasurementPacket != nullptr)
@@ -390,6 +403,10 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
         valid = valid && max17048Sensor.getMetrics(m);
         hasSensor = true;
     }
+    if (cgRadSens.hasSensor()) {
+        valid = valid && cgRadSens.getMetrics(m);
+        hasSensor = true;
+    }
 
 #endif
     return valid && hasSensor;
@@ -443,6 +460,8 @@ bool EnvironmentTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
         LOG_INFO("Send: wind speed=%fm/s, direction=%d degrees, weight=%fkg", m.variant.environment_metrics.wind_speed,
                  m.variant.environment_metrics.wind_direction, m.variant.environment_metrics.weight);
 
+        LOG_INFO("Send: radiation=%fµR/h", m.variant.environment_metrics.radiation);
+
         sensor_read_error_count = 0;
 
         meshtastic_MeshPacket *p = allocDataProtobuf(m);
@@ -585,6 +604,11 @@ AdminMessageHandleResult EnvironmentTelemetryModule::handleAdminMessageForModule
         if (result != AdminMessageHandleResult::NOT_HANDLED)
             return result;
     }
+    if (cgRadSens.hasSensor()) {
+        result = cgRadSens.handleAdminMessage(mp, request, response);
+        if (result != AdminMessageHandleResult::NOT_HANDLED)
+            return result;
+    }
     return result;
 }
 

src/modules/Telemetry/Sensor/CGRadSensSensor.cpp

@@ -0,0 +1,75 @@
+/*
+ *  Support for the ClimateGuard RadSens Dosimeter
+ *  A fun and educational sensor for Meshtastic; not for safety critical applications.
+ */
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CGRadSensSensor.h"
+#include "TelemetrySensor.h"
+#include <Wire.h>
+#include <typeinfo>
+
+CGRadSensSensor::CGRadSensSensor() : TelemetrySensor(meshtastic_TelemetrySensorType_RADSENS, "RadSens") {}
+
+int32_t CGRadSensSensor::runOnce()
+{
+    // Initialize the sensor following the same pattern as RCWL9620Sensor
+    LOG_INFO("Init sensor: %s", sensorName);
+    if (!hasSensor()) {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+
+    status = true;
+    begin(nodeTelemetrySensorsMap[sensorType].second, nodeTelemetrySensorsMap[sensorType].first);
+
+    return initI2CSensor();
+}
+
+void CGRadSensSensor::setup() {}
+
+void CGRadSensSensor::begin(TwoWire *wire, uint8_t addr)
+{
+    // Store the Wire and address to the sensor following the same pattern as RCWL9620Sensor
+    _wire = wire;
+    _addr = addr;
+    _wire->begin();
+}
+
+float CGRadSensSensor::getStaticRadiation()
+{
+    // Read a register, following the same pattern as the RCWL9620Sensor
+    uint32_t data;
+    _wire->beginTransmission(_addr); // Transfer data to addr.
+    _wire->write(0x06);              // Radiation intensity (static period T = 500 sec)
+    if (_wire->endTransmission() == 0) {
+        if (_wire->requestFrom(_addr, (uint8_t)3)) {
+            ; // Request 3 bytes
+            data = _wire->read();
+            data <<= 8;
+            data |= _wire->read();
+            data <<= 8;
+            data |= _wire->read();
+
+            // As per the data sheet for the RadSens
+            // Register 0x06 contains the reading in 0.1 * μR / h
+            float microRadPerHr = float(data) / 10.0;
+            return microRadPerHr;
+        }
+    }
+    return -1.0;
+}
+
+bool CGRadSensSensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    // Store the meansurement in the the appropriate fields of the protobuf
+    measurement->variant.environment_metrics.has_radiation = true;
+
+    LOG_DEBUG("CGRADSENS getMetrics");
+    measurement->variant.environment_metrics.radiation = getStaticRadiation();
+
+    return true;
+}
+#endif

src/modules/Telemetry/Sensor/CGRadSensSensor.h

@@ -0,0 +1,30 @@
+/*
+ *  Support for the ClimateGuard RadSens Dosimeter
+ *  A fun and educational sensor for Meshtastic; not for safety critical applications.
+ */
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "TelemetrySensor.h"
+#include <Wire.h>
+
+class CGRadSensSensor : public TelemetrySensor
+{
+  private:
+    uint8_t _addr = 0x66;
+    TwoWire *_wire = &Wire;
+
+  protected:
+    virtual void setup() override;
+    void begin(TwoWire *wire = &Wire, uint8_t addr = 0x66);
+    float getStaticRadiation();
+
+  public:
+    CGRadSensSensor();
+    virtual int32_t runOnce() override;
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+};
+
+#endif

src/serialization/MeshPacketSerializer.cpp

@@ -78,6 +78,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                     msgPayload["wind_direction"] = new JSONValue((uint)decoded->variant.environment_metrics.wind_direction);
                     msgPayload["wind_gust"] = new JSONValue(decoded->variant.environment_metrics.wind_gust);
                     msgPayload["wind_lull"] = new JSONValue(decoded->variant.environment_metrics.wind_lull);
+                    msgPayload["radiation"] = new JSONValue(decoded->variant.environment_metrics.radiation);
                 } else if (decoded->which_variant == meshtastic_Telemetry_air_quality_metrics_tag) {
                     msgPayload["pm10"] = new JSONValue((unsigned int)decoded->variant.air_quality_metrics.pm10_standard);
                     msgPayload["pm25"] = new JSONValue((unsigned int)decoded->variant.air_quality_metrics.pm25_standard);

src/serialization/MeshPacketSerializer_nRF52.cpp

@@ -77,6 +77,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                     jsonObj["payload"]["wind_direction"] = (uint)decoded->variant.environment_metrics.wind_direction;
                     jsonObj["payload"]["wind_gust"] = decoded->variant.environment_metrics.wind_gust;
                     jsonObj["payload"]["wind_lull"] = decoded->variant.environment_metrics.wind_lull;
+                    jsonObj["payload"]["radiation"] = decoded->variant.environment_metrics.radiation;
                 } else if (decoded->which_variant == meshtastic_Telemetry_air_quality_metrics_tag) {
                     jsonObj["payload"]["pm10"] = (unsigned int)decoded->variant.air_quality_metrics.pm10_standard;
                     jsonObj["payload"]["pm25"] = (unsigned int)decoded->variant.air_quality_metrics.pm25_standard;