Super Famicom - Wavy line interference using FXPAK Pro

[PJSOConnell]

Hi all,

I am using an official FXPAK Pro from everdrive.me using 1.11.0.
I am using a Super Famicom with a SuperCIC installed, fully recapped, using this power supply and this RGB cable with an OSSC.

When using official cartridges from all regions I have no issues. However, when using the FXPAK Pro, I get a large amount of wavy lines onscreen, almost resembling interference.

IMG_3364.mov

I have tried this with SuperCIC enabled and disabled, I have replaced the voltage regulator, and I see no difference. I have disabled in-game-hooks.

I have seen others mention similar issues where people said downgrading to 1.10.2 rectified this issue but I cannot downgrade at all, I just get a black screen.

Any help would be great.

[mrehkopf]

I just ordered the power supply and cable to check if I can provoke a similar issue. What model is your Super Famicom?

[PJSOConnell]

@mrehkopf hey there! My model is the Super Famicom SNS-CPU-APU-01.

[Ramsis-SNES]

Do you have another 9-10V, 1.3A power supply to try and rule out the one you're currently using as a potential source of trouble?

[PJSOConnell]

Yes I tested it with a different matching PSU and also Component cables instead of SCART, same result unfortunately. On 13 Aug 2024, at 5:40 p.m., Ramsis ***@***.***> wrote: Do you have another 9-10V, 1.3A power supply to try and rule out the one you're currently using as a potential source of trouble? —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>