Skip to content

Commit

Permalink
ARM: dts: qcom: lenovo-lxf-p5100: Add initial device tree
Browse files Browse the repository at this point in the history 
Lenovo Yoga Tab 3 10 LTE is a tablet using the MSM8909 SoC released in 2016.

Add a device tree for with initial support for:

- GPIO keys
- pm8909-vibrator
- SDHCI (internal and external storage)
- UART
- WCNSS (WiFi/BT)
- Regulators
- Touchscreen
- PWM panel backlight
- Hall
- Power LED
- Framebuffer
- USB (Dont Work)
- Magnetometer

Signed-off-by: Karl Chan <[email protected]>
  • Loading branch information
@exkc
Karl Chan authored and exkc committed Oct 30, 2024
1 parent bad4374 commit ad6632f
Show file tree
Hide file tree
Showing 2 changed files with 377 additions and 0 deletions.
1 change: 1 addition & 0 deletions arch/arm/boot/dts/qcom/Makefile
View file
Original file line number Diff line number Diff line change
Expand Up @@ -34,6 +34,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8905-nokia-argon.dtb \
qcom-msm8909-acer-t01.dtb \
qcom-msm8909-fareastone-smart506.dtb \
qcom-msm8909-lenovo-lxf-p5100.dtb \
qcom-msm8909-nokia-leo.dtb \
qcom-msm8909-nokia-sparkler.dtb \
qcom-msm8916-samsung-e5.dtb \
Expand Down
376 changes: 376 additions & 0 deletions arch/arm/boot/dts/qcom/qcom-msm8909-lenovo-lxf-p5100.dts
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,376 @@
// SPDX-License-Identifier: GPL-2.0-only

/dts-v1/;

#include "qcom-msm8909-pm8909.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
#include <dt-bindings/power/summit,smb347-charger.h>

/ {
model = "Lenovo Yoga Tab 3 10 LTE";
compatible = "lenovo,lxf-p5100", "qcom,msm8909";
chassis-type = "tablet";

aliases {
serial0 = &blsp_uart1;
};

chosen {
stdout-path = "serial0";

framebuffer@83200000 {
compatible = "simple-framebuffer";
reg = <0x83200000 (800 * 1280 * 3)>;

width = <800>;
height = <1280>;
stride = <(1280 * 3)>;
format = "r8g8b8";

power-domains = <&gcc MDSS_GDSC>;

clocks = <&gcc GCC_MDSS_AHB_CLK>,
<&gcc GCC_MDSS_AXI_CLK>,
<&gcc GCC_MDSS_VSYNC_CLK>,
<&gcc GCC_MDSS_MDP_CLK>,
<&gcc GCC_MDSS_BYTE0_CLK>,
<&gcc GCC_MDSS_PCLK0_CLK>,
<&gcc GCC_MDSS_ESC0_CLK>;
};
};

backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pm8909_pwm 0 100000>;

brightness-levels = <0 255>;
num-interpolated-steps = <255>;
default-brightness-level = <255>;
};

bat: battery {
compatible = "simple-battery";
voltage-min-design-microvolt = <3400000>;
voltage-max-design-microvolt = <4350000>;
energy-full-design-microwatt-hours = <7600000>;
charge-full-design-microamp-hours = <2000000>;

ocv-capacity-celsius = <25>;
ocv-capacity-table-0 = <4335000 100>, <4265000 95>,
<4207000 90>, <4152000 85>, <4101000 80>, <4051000 75>,
<3995000 70>, <3958000 65>, <3921000 60>, <3874000 55>,
<3838000 50>, <3815000 45>, <3797000 40>, <3783000 35>,
<3772000 30>, <3763000 25>, <3744000 20>, <3718000 16>,
<3692000 13>, <3689000 11>, <3688000 10>, <3687000 9>,
<3685000 8>, <3683000 7>, <3679000 6>, <3663000 5>,
<3620000 4>, <3555000 3>, <3461000 2>, <3312000 1>,
<3000000 0>;
};

gpio-keys {
compatible = "gpio-keys";

pinctrl-0 = <&gpio_keys_default>;
pinctrl-names = "default";

label = "GPIO Buttons";

volume-up {
label = "Volume Up";
gpios = <&tlmm 90 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};

hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
};
};

reg_ts_vdd: regulator-ts {
compatible = "regulator-fixed";
regulator-name = "reg_ts_vdd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;

gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
enable-active-high;

pinctrl-0 = <&ts_vdd_default>;
pinctrl-names = "default";
};
};

&blsp_i2c1 {
status = "okay";

/* TODO: add Bochs BMA223 accelerometer/ELAN EPL2102 light sensor here */

led-controller@68 {
compatible = "si-en,sn3191";
reg = <0x68>;
#address-cells = <1>;
#size-cells = <0>;
shutdown-gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;

led@1 {
reg = <1>;
function = LED_FUNCTION_POWER;
led-max-microamp = <5000>;
};
};

magnetometer@c {
compatible = "asahi-kasei,ak09911";
reg = <0x0c>;

vdd-supply = <&pm8909_l17>;
vid-supply = <&pm8909_l6>;

reset-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;

pinctrl-names = "default";
pinctrl-0 = <&magnetometer_default>;
};

};

&blsp_i2c5 {
status = "okay";

touchscreen@6c {
compatible = "hideep,hideep-ts";
reg = <0x6c>;

interrupt-parent = <&tlmm>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;

reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;

vdd-supply = <&reg_ts_vdd>;
vid-supply = <&pm8909_l6>;

touchscreen-size-x = <800>;
touchscreen-size-y = <1280>;

pinctrl-0 = <&touchscreen_default>;
pinctrl-names = "default";
};
};

&blsp_uart1 {
status = "okay";
};

/* FIXME: Missing the real fuel gauge's node */
&pm8909_bms {
power-supplies = <&pm8909_charger>;
status = "okay";
};

&pm8909_mpps {
pwm_out: mpp2-state {
pins = "mpp2";
function = "digital";
power-source = <PM8916_MPP_VPH>;
output-low;
qcom,dtest = <1>;
};
};

&pm8909_pwm {
pinctrl-0 = <&pwm_out>;
pinctrl-names = "default";
status = "okay";
};

&pm8909_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};

/* FIXME: Set up smb358 properly for the usb */
&pm8909_usbin {
status = "okay";
};

&pm8909_vib {
status = "okay";
};

&sdhc_1 {
status = "okay";
non-removable;
};

&sdhc_2 {
status = "okay";
};

&smd_rpm_regulators {
s2 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <1850000>;
};

l1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};

l2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};

l4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

l5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

l6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

l7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};

l8 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2900000>;
};

l9 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
};

l10 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1300000>;
};

l11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-system-load = <200000>;
regulator-allow-set-load;
};

l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
};

l13 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3075000>;
};

l14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};

l15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};

l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};

l18 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
};

&usb {
dr_mode = "peripheral";
extcon = <&pm8909_usbin>;
status = "okay";
};

&usb_hs_phy {
extcon = <&pm8909_usbin>;
status = "okay";
};

&wcnss {
status = "okay";
};

&wcnss_iris {
compatible = "qcom,wcn3620";
};

&tlmm {
gpio_keys_default: gpio-keys-default-state {
hall-sensor-pins {
pins = "gpio36";
function = "gpio";
drive-strength = <10>;
bias-pull-up;
};

volume-up-pins {
pins = "gpio90";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};

magnetometer_default: magnetometer-default-state {
reset-pins {
pins = "gpio94";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};

touchscreen_default: touchscreen-default-state {
reset-pins {
pins = "gpio12";
function = "gpio";
drive-strength = <2>;
bias-disable;
};

touchscreen-pins {
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};

ts_vdd_default: ts_vdd_default-state {
vdd-pins {
pins = "gpio92";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
};

0 comments on commit ad6632f

Please sign in to comment.