homebridge-wink

Homebridge platform plugin for the Wink hub

This repository contains the Wink plugin for homebridge that was previously bundled in the main homebridge repository.

Installation

1. Install homebridge using: npm install -g homebridge
2. Install this plugin using: npm install -g homebridge-wink
3. Update your configuration file. See sample config.json snippet below.

Configuration

Configuration sample:

"platforms": [
   	{
   		"platform": "Wink",
   		"name": "Wink",
   		"client_id": "YOUR_WINK_API_CLIENT_ID",
   		"client_secret": "YOUR_WINK_API_CLIENT_SECRET",
   		"username": "[email protected]",
   		"password": "WINK_PASSWORD",
   		"hide_groups": ["garage_doors", "thermostats"],
   		"hide_ids": []
   		
   	}
   ],

Fields:

• "platform": Must always be "Wink" (required)
• "name": Can be anything (required)
• "client_id": Wink API client id, must be obtained from [email protected] (required)
• "client_secret": Wink API client id, must be obtained from [email protected] (required)
• "username": Wink login username, same as app (required)
• "password": Wink login password, same as app (required)
• "hide_groups": List of Wink groups that will be hidden from Homebridge. Accepted values are:
  • air_contidioners
  • binary_switches
  • garage_doors
  • light_bulbs
  • locks
  • outlets
  • sensor_pods
  • smoke_detectors
  • thermostats
• "hide_ids": List of Wink IDs that will be hidden from Homebrige. These ID can easily be seen in the initialization portion of homebridge.
• "temperature_unit" : Identifies the display unit for thermostats. F or C. Defaults to F
• "unregister_disconnected" : Blocks devices that are currently disconnected from the Wink hub. true/false. Defaults to true.

Device Support

Supported Devices:

• Air Conditioners - Identifies the direct-connected Wink Aros.
  • Change between cool, auto and off.
  • Set temperature.
  • Direct fan control is not yet available.
• Binary Switches - Z-Wave non-dimming switches, Wink Outlink, Wink Relay.
  • On/Off Functions.
  • For the Outlink, uses the power usage to determine if on or off.
  • Does not report actual power usage due to limitation in HomeKit Interface.
• Garage Doors
  • Open/Close Wink-connected garage doors.
  • Report battery status to HomeKit.
  • Does not identify blocked doors due to limitation in Wink Interface.
• Light Bulbs - Light Bulbs and dimmable switches.
  • On/Off and Dimming.
  • Bulbs with support allow Hue and Saturation.
• Locks
  • Lock/Unlock and report current status.
  • Report Battery Status.
  • Does not support tampering due to limitation in developer's locks and possibly Wink API.
• Outlets - The controllable outlets on the Quirky Power Strip.
  • On/Off
  • Does not group the outlets by power strip due to limitation in HomeKit Interface.
• Sensor Pods - Spotter, Tripper and other PIR and Door Sensors.
  • PIR reports as Motion Detector
  • Tripper and other Door Sensors report as Doors. Tamper Detection is not available in HomeKit for these.
  • Spotter reports Temperature and Humidity to HomeKit.
  • Spotter Reports Battery Level.
  • Spotter does not report brightness, vibration or loudness to HomeKit. Apple expects values and these are simply reported as yes/no concerning if it changed.
• Smoke Detectors - I believe only Kiddie detectors are supported
  • Reports Battery Level.
  • Reports CO and Smoke Alarms as available by the detector
• Thermostats
  • Should be full functionality.

Not Yet Supported Devices In Consideration

• Cameras

Not Supported Due to HomeKit Limitations

• Eggtrays - No compatible device in HomeKit
• Piggy Banks - No compatible device in HomeKit
• Hubs - Redundant the way homebridge platform plugins are designed
• Remotes - Only displays what it is linked to and doesn't allow as remote
• Buttons - The TAPT and Wink Relay buttons. I expect these are too time-delayed to be useful.
• "Unknown Devices" - Wink doesn't even know what these are.

If you disagree with any of my "limitations in HomeKit", feel free to create and issue for a feature request that reveals what I'm missing.