Skip to content

Latest commit

 

History

History
170 lines (133 loc) · 8.23 KB

067771.md

File metadata and controls

170 lines (133 loc) · 8.23 KB
Raw
title description addedAt pageClass
Legrand 067771 control via MQTT
Integrate your Legrand 067771 via Zigbee2MQTT with whatever smart home infrastructure you are using without the vendor's bridge or gateway.
2020-01-14 19:34:25 UTC
device-page

Legrand 067771
Model 067771
Vendor Legrand
Description Wired switch without neutral
Exposes light (state, brightness), ballast_minimum_level, ballast_maximum_level, device_mode, led_in_dark, led_if_on, power_on_behavior, linkquality
Picture Legrand 067771

Notes

Model numbers

Model number depends on the country and the colour of the devices, for instance:

  • French models are branded as Céliane with Netatmo, and models for this device depends on the colour, with the following numbers: "0 677 21", "0 677 71" and "0 648 91".

  • Spanish models are branded as Legrand Valena Next, and models for this device depends on the colour, with the following numbers: "7 418 10", "7 418 40" and "7 418 70".

Other brand names depending on the country:

  • Availability for Céliane™ with Netatmo → France and Overseas territories, Greece, Poland, Hungary, Tunisia, Morocco, Ivory Coast, Czech Republic, Russia, Mauritius
  • Availability for Dooxie™ with Netatmo → France and Overseas territories
  • Availability for Mosaic™ with Netatmo → France and Overseas territories, Ivory Coast
  • Availability for Living Now™ with Netatmo → Italy, Belgium, Greece, Portugal, Lebanon, Israel, Chile, Peru, Mexico
  • Availability for Valena Allure™ with Netatmo → Greece, Germany, Austria, Poland, Slovakia, Bulgaria, Czech Republic, Hungary, Russia
  • Availability for Valena Life™ with Netatmo → Greece, Germany, Austria, Portugal, Poland, Slovakia, Bulgaria, Czech Republic, Hungary, Lituania, Russia
  • Availability for Valena Next™ with Netatmo → Spain, Belgium
  • Availability for Arteor™ with Netatmo → Australia, New Zealand, India, Malaysia, Lebanon, Mauritius, South Africa
  • Availability for Plexo™ with Netatmo → France and Overseas territories, Spain, Belgium
  • Availability for Modul'Up™ with Netatmo → France and Overseas territories

LED configuration

  • permanent_led: enable or disable the permanent blue LED. Values: ON / OFF (default)
  • led_when_on: enables the LED when the light is on. Values: ON / OFF (default)

Example of MQTT message payload to disable permanent LED and enable LED when the lights are on. This should be sent to zigbee2mqtt/FRIENDLY_NAME/set:

{
    "permanent_led": "OFF",
    "led_when_on": "ON"
}

Dimmer

  • dimmer_enabled: enable or disable the dimming functions. Values: ON / OFF (default)

Example of MQTT message payload to enable dimming. This should be sent to zigbee2mqtt/FRIENDLY_NAME/set:

{
    "dimmer_enabled": "ON"
}

Identify

Helps to identify the switch using the LED.

  • identify['effect']: only works for blink3 & fixed in effect. Values:

    • blink3
    • fixed
    • blinkgreen
    • blinkblue

  • identify['color']: only works for blink3 & fixed in effect. Values:

    • default
    • red
    • green
    • blue
    • lightblue
    • yellow
    • pink
    • white

Example of MQTT message payload to Identify the switch. This should be sent to zigbee2mqtt/FRIENDLY_NAME/set:

{
  "identify": {
    "effect": "blink3",
    "color": "white"
  }
}

OTA updates

This device supports OTA updates, for more information see OTA updates.

Options

How to use device type specific configuration

  • transition: Controls the transition time (in seconds) of on/off, brightness, color temperature (if applicable) and color (if applicable) changes. Defaults to 0 (no transition). The value must be a number with a minimum value of 0

  • state_action: State actions will also be published as 'action' when true (default false). The value must be true or false

Exposes

Light

This light supports the following features: state, brightness.

  • state: To control the state publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the state send a message to zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.
  • brightness: To control the brightness publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"brightness": VALUE} where VALUE is a number between 0 and 254. To read the brightness send a message to zigbee2mqtt/FRIENDLY_NAME/get with payload {"brightness": ""}.

Ballast_minimum_level (numeric)

Specifies the minimum brightness value. Value can be found in the published state on the ballast_minimum_level property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"ballast_minimum_level": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"ballast_minimum_level": NEW_VALUE}. The minimal value is 1 and the maximum value is 254.

Ballast_maximum_level (numeric)

Specifies the maximum brightness value. Value can be found in the published state on the ballast_maximum_level property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"ballast_maximum_level": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"ballast_maximum_level": NEW_VALUE}. The minimal value is 1 and the maximum value is 254.

Device_mode (binary)

Allow the device to change brightness. Value can be found in the published state on the device_mode property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"device_mode": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"device_mode": NEW_VALUE}. If value equals dimmer_on device_mode is ON, if dimmer_off OFF.

Led_in_dark (binary)

Enables the LED when the light is turned off, allowing to see the switch in the dark. Value can be found in the published state on the led_in_dark property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"led_in_dark": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"led_in_dark": NEW_VALUE}. If value equals ON led_in_dark is ON, if OFF OFF.

Led_if_on (binary)

Enables the LED when the light is turned on. Value can be found in the published state on the led_if_on property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"led_if_on": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"led_if_on": NEW_VALUE}. If value equals ON led_if_on is ON, if OFF OFF.

Power_on_behavior (enum)

Controls the behavior when the device is powered on after power loss. Value can be found in the published state on the power_on_behavior property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"power_on_behavior": ""}. To write (/set) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"power_on_behavior": NEW_VALUE}. The possible values are: off, previous, on.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.