Skip to content

Latest commit

 

History

History
624 lines (422 loc) · 12.1 KB

Tonino-Serial.md

File metadata and controls

624 lines (422 loc) · 12.1 KB
Raw

Tonino Serial Protocol

The Tonino firmware implements a simple protocol that can be used to adjust basic settings of the Tonino roast color meter.

Serial Port Settings

  • baudrate: 115200 (Classic Tonino), 57600 (Tiny Tonino)
  • bytesize: 8
  • parity: none
  • stopbits: 1

Command Language

The following EBNF production rules define the general syntax of the command language:

sep = " " ;
newline = "\n" ;
number = int | float ;
values = number | values, sep, number ;
cmdline = cmd, [ sep, values ], newline ;
result = cmd, [ ":", values ], newline ;

Each cmdline that is successfully processed is answered by a result with the same cmd and a potentially empty list of numbers.

Commands supported by all Toninos

Commands cmd =   Purpose
TONINO return version information
SCAN scan and return T-value
I_SCAN scan and return internal value
II_SCAN scan and return raw values
D_SCAN scan unilluminated and return raw values
SETCAL store calibration values
SETSCALING set scaling values
GETSCALING get scaling values
SETBRIGHTNESS set brightness
GETBRIGHTNESS get brightness
RESETDEF reset to defaults

Additional commands supported only by the Classic Tonino

Commands cmd =   Purpose
GETCAL retrieve calibration values
SETSAMPLING set sampling
GETSAMPLING get sampling
SETCMODE set color measure mode
GETCMODE get color measure mode
SETLTDELAY set delay between can-up and scan
GETLTDELAY get delay between can-up and scan
SETCALINIT set check calibration at start
GETCALINIT get check calibration at start

Additional commands supported only by the Tiny Tonino

Commands cmd =   Purpose
SETTARGET set target and range
GETTARGET return target and range
SETSCALE set scale name
GETSCALE get scale name
SETNAME set user name
GETNAME get user name
SETDFLIP set display flip (removed in v2.2.0 and later)
GETDFLIP get display flip (removed in v2.2.0 and later)

Additional commands supported only by the Tiny Tonino firmware v2.2.0 or later

Commands cmd =   Purpose
SETDSCALE set default scale
SETDSCALE get default scale

Detailed Command Syntax

  • TONINO
    Get firmware version (major minor build)

    • Arguments: none

    • Results:

      value type
      major int
      minor int
      build int

    • Example:

      request reply
      TONINO\n TONINO:1 0 1\n

  • SCAN
    Scan and return T-value

    • Arguments: none

    • Results:

      value type
      T-value int

    • Example:

      request reply
      SCAN\n SCAN:58\n

  • I_SCAN
    Scan and return internal value

    • Arguments: none

    • Results:

      value type
      Internal value float

    • Example:

      request reply
      I_SCAN\n I_SCAN:3.434770\n

  • II_SCAN
    Scan and return raw values

    • Arguments: none

    • Results:

      value type
      white float
      red float
      green float
      blue float
      T-value int

    • Example:

      request reply
      II_SCAN\n II_SCAN:30330 0 0 8980 58\n

  • D_SCAN
    Scan unilluminated and return raw values

    • Arguments: none

    • Results:

      value type
      white float
      red float
      green float
      blue float

    • Example:

      request reply
      D_SCAN\n D_SCAN:30330 0 0 8980\n

  • SETBRIGHTNESS
    Set brightness

    • Arguments:

      param type
      b int [0,..,15]]

    • Results:: none

    • Example:

      request reply
      SETBRIGHTNESS 10\n SETBRIGHTNESS\n

  • GETBRIGHTNESS
    Get brightness

    • Arguments: none

    • Results:

      value type
      b int

    • Example:

      request reply
      GETBRIGHTNESS\n GETBRIGHTNESS:10\n

  • RESETDEF
    Reset to defaults

    • Arguments: none

    • Results: none

    • Example:

      request reply
      RESETDEF\n RESETDEF\n

  • SETCAL
    Set calibration values

    • Arguments:

      param type
      slope float
      intercept float

    • Results:: none

    • Example:

      request reply
      SETCAL 1.024999 -0.032341\n SETCAL\n

  • GETCAL
    Get calibration values

    • Arguments: none

    • Results::

      value type
      slope float
      intercept float

    • Example:

      request reply
      GETCAL\n GETCAL:1.024999 -0.032341\n

  • SETSCALING
    Set set scaling values

    • Arguments: ax^3 + bx^2 + cx + d

      param type
      a float
      b float
      c float
      d float

    • Results:: none

    • Example:

      request reply
      SETSCALING 0.0 0.0 91.248359 -254.914581\n SETSCALING\n

  • GETSCALING
    Get scaling values

    • Arguments:: none

    • Results: ax^3 + bx^2 + cx + d

      value type
      a float
      b float
      c float
      d float

    • Example:

      request reply
      GETSCALING\n GETSCALING:0.000000 0.000000 91.248359 -254.914581\n

  • SETSAMPLING
    Set sampling

    • Arguments: sampling duration = 1sec / d

      param type
      d int [1,..,255]

    • Results: none

    • Example:

      request reply
      SETSAMPLING 5\n SETSAMPLING\n

  • GETSAMPLING
    Get sampling

    • Arguments: none

    • Results: sampling duration = 1sec / d

      value type
      d int

    • Example:

      request reply
      GETSAMPLING\n GETSAMPLING:5\n

  • SETCMODE
    Set color measure mode

    • Arguments:
      1 : white
      2 : red
      4 : green
      8 : blue

      e.g. 1+8=9 activates white and blue

      param type
      c int

    • Results:: none

    • Example:

      request reply
      SETCMODE 9\n SETCMODE\n

  • GETCMODE
    Get color measure mode

    • Arguments: none

    • Results:
      1 : white
      2 : red
      4 : green
      8 : blue

      e.g. 1+8=9 returns white and blue

      value type
      c int

    • Example:

      request reply
      GETCMODE\n GETCMODE:9\n

  • SETLTDELAY
    Set delay between can-up and scan

    • Arguments: delay = d * 1/10sec

      param type
      d int [0,..,255]

    • Results:: none

    • Example:

      request reply
      SETCMODE 10\n SETCMODE\n

  • GETLTDELAY
    Get delay between can-up and scan

    • Arguments: none

    • Results: delay = d * 1/10sec

      value type
      d int

    • Example:

      request reply
      GETCMODE\n GETCMODE:10\n

  • SETCALINIT
    Set check calibration at start

    • Arguments:

      param type
      on int (0 for false or 1 for true)

    • Results: none

    • Example:

      request reply
      SETCALINIT 1\n SETCALINIT\n

  • GETCALINIT
    Get check calibration at start

    • Arguments: none

    • Results:

      value type
      on int (0 for false or 1 for true)

    • Example:

      request reply
      GETCALINIT\n GETCALINIT:1\n

  • SETTARGET
    Set set scaling values

    • Arguments:

      param type
      target int
      range int

    • Results:: none

    • Example:

      request reply
      SETTARGET 100 5\n SETTARGET\n

  • GETTARGET
    Get scaling values

    • Arguments:: none

    • Results:

      value type
      target int
      range int

    • Example:

      request reply
      GETTARGET\n GETTARGET:100 5\n

  • SETSCALE
    Set scale name

    • Arguments:

      param type
      name str

    • Results: none

    • Example:

      request reply
      SETSCALE Agtron\n SETSCALE\n

  • GETSCALE
    Get scale name

    • Arguments: none

    • Results:

      value type
      name str

    • Example:

      request reply
      GETSCALE\n GETSCALE:Agtron\n

  • SETNAME
    Set user name

    • Arguments:

      param type
      name str

    • Results: none

    • Example:

      request reply
      SETNAME Steve\n SETNAME\n

  • GETNAME
    Get user name

    • Arguments: none

    • Results:

      value type
      name str

    • Example:

      request reply
      GETNAME\n GETNAME:Steve\n

  • SETDFLIP
    Set display flip mode

    • Arguments:

      param type
      on int (0 for false or 1 for true)

    • Results: none

    • Example:

      request reply
      SETDFLIP 1\n SETDFLIP\n

  • GETDFLIP
    Get display flip mode

    • Arguments: none

    • Results:

      value type
      on int (0 for false or 1 for true)

    • Example:

      request reply
      GETDFLIP\n GETDFLIP:1\n

  • SETDSCALE
    Set default scale

    • Arguments:

      param type
      scale int (0 for Tonino or 1 for Agtron)

    • Results: none

    • Example:

      request reply
      SETDSCALE 1\n SETDSCALE\n

  • GETDSCALE
    Get default sale

    • Arguments: none

    • Results:

      value type
      scale int (0 for Tonino or 1 for Agtron)

    • Example:

      request reply
      GETDSCALE\n GETDSCALE:1\n