diff --git a/README.md b/README.md
index 7c97b8e..85f35c4 100644
--- a/README.md
+++ b/README.md
@@ -7,6 +7,6 @@ WebSocket based version of [motor-on-roller-blind](https://github.com/nidayand/m
  2. Upon powering on the first time WIFI credentials and a hostname is needed to be configured. Connect your computer to a new WIFI hotspot named **BlindsConnectAP**. Password = **nidayand**
  3. Connect to your normal WIFI with your client and go to the IP address of the device - or if you have an mDNS supported device (e.g. iOS, OSX or have Bonjour installed) you can go to http://{hostname}.local. If you don't know the IP-address of the device check your router for the leases (or check the serial console in the Arduino IDE)
  4. As the webpage is loaded it will connect through a websocket directly to the device to progress updates and to control the device. If any other client connects the updates will be in sync.
- 5. Go to the Configuration page to calibrate the motor with the start and end positions of the roller blind. Follow the instructions on the page
+ 5. Go to the Settings page to calibrate the motor with the start and end positions of the roller blind. Follow the instructions on the page
 
 ![enter image description here](https://user-images.githubusercontent.com/2181965/31178217-a5351678-a918-11e7-9611-3e8256c873a4.png) ![enter image description here](https://user-images.githubusercontent.com/2181965/31178216-a4f7194a-a918-11e7-85dd-8e189cfc031c.png)