Please add support for Z690

[ArjenMarc]

Hello, On my ProArt Z690 Creator Wifi Aureal is not working My guess is it is because the product id is changed IOregistryexploer gives this info about the Aura Led controller
idVendor=0x0b05
idProduct=0x19af

My request to add support for this new controller in Aureal so that I can be used on Asus Alderlake Z690 motherboards. With my thanks in advance. Best regards ArjenM

[usr-sse2]

Just adding this device ID is not sufficient.

[usr-sse2]

UPD: it turned out that it actually worked. My LEDs are connected not directly to the motherboard, but through a controller, which was switched to manual mode using a button. When I long pressed it to switch it back to input from the motherboard, I became able to control the LEDs from Aureal.