This is an example of cli use with wifi running on serial terminal in frdm-mcxn947, this example has many test options for wifi. There are the options:
-help
-wlan-version
-wlan-mac
-wlan-scan
-wlan-scan-opt ssid <ssid> bssid ...
-wlan-add <profile_name> ssid <ssid> bssid...
-wlan-remove <profile_name>
-wlan-list
-wlan-connect <profile_name>
-wlan-start-network <profile_name>
-wlan-stop-network
-wlan-disconnect
-wlan-stat
-wlan-info
-wlan-address
-wlan-get-uap-channel
-wlan-get-uap-sta-list
-ping [-s <packet_size>] [-c <packet_count>] [-W <timeout in sec>]<ip_address>
-iperf [-s|-c <host>|-a|-h] [options]
-dhcp-stat
-
Open MCUXpresso IDE, in the Quick Start Panel, choose Import from Application Code Hub
-
Enter the demo name in the search bar.
-
Click Copy GitHub link, MCUXpresso IDE will automatically retrieve project attributes, then click Next>.
-
Select main branch and then click Next>, Select the MCUXpresso project, click Finish button to complete import.
- Connect a USB type C cable between the PC host and the CMSIS DAP USB port on the board
- Open a serial terminal with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
- Set jumpers of AW-AM510 module.
- Connect the Wi-Fi module.
- Download the program to the target board.
- Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.
-
Add CLI init API in applications main function.
-
Add WLAN CLI init API once WLAN Connection Manager gets initialized correctly.
-
When the demo starts, a welcome message would appear on the terminal, press enter for command prompt: Press tab or type help to list out all available CLI commands.
wifi cli demo Initialize WLAN Driver MAC Address: C0:E4:34:5A:98:E9 host init done [net] Initialized TCP/IP networking stack mass storage device attached:pid=0x5567vid=0x781 address=1 app_cb: WLAN: received event 10 app_cb: WLAN initialized WLAN CLIs are initialized CLIs Available:
help wlan-version wlan-mac wlan-scan wlan-scan-opt ssid bssid ... wlan-add <profile_name> ssid bssid... wlan-remove <profile_name> wlan-list wlan-connect <profile_name> wlan-start-network <profile_name> wlan-stop-network wlan-disconnect wlan-stat wlan-info wlan-address wlan-get-uap-channel wlan-get-uap-sta-list ping [-s <packet_size>] [-c <packet_count>] [-W ] <ip_address> iperf [-s|-c |-a|-h] [options] dhcp-stat
#help wlan-version wlan-mac wlan-scan wlan-scan-opt wlan-add wlan-remove wlan-list
#help
help wlan-version wlan-mac wlan-scan wlan-scan-opt ssid <ssid> bssid ... wlan-add <profile_name> ssid <ssid> bssid... wlan-remove <profile_name> wlan-list wlan-connect <profile_name> wlan-start-network <profile_name> wlan-stop-network wlan-disconnect wlan-stat wlan-info wlan-address wlan-get-uap-channel wlan-get-uap-sta-list ping [-s <packet_size>] [-c <packet_count>] [-W <timeout in sec>] <ip_address> iperf [-s|-c <host>|-a|-h] [options] dhcp-stat#wlan - version WLAN Driver Version : v1.3.r21.p1 WLAN Firmware Version : w8977o-V2, RF87XX, FP91, 16.91.10.p89, WPA2_CVE_FIX 1, PVE_FIX 1
#wlan - mac MAC address C0:E4:34:5A:99:45
#wlan - scan Scan scheduled...
94:10:3E:02:60:F0 "nxp_mrvl" Infra channel: 1 rssi: -25 dBm security: OPEN WMM: YES 94:10:3E:02:60:F1 "nxp_mrvl_5ghz" Infra channel: 36 rssi: -39 dBm security: OPEN WMM: YES 90:72:40:21:B3:1A "apple_g" Infra channel: 11 rssi: -51 dBm security: WPA2 WMM: YES#wlan - scan - opt Usage: wlan-scan-opt ssid bssid channel probes Error: invalid number of arguments
#wlan - scan - opt ssid apple_g Scan for ssid "apple_g" scheduled...
90:72:40:21:B3:1A "apple_g" Infra channel: 11 rssi: -52 dBm security: WPA2 WMM: YES 90:72:40:21:B3:1B "apple_g" Infra channel: 149 rssi: -60 dBm security: WPA2 WMM: YES#wlan - add
Usage: For Station interface For DHCP IP Address assignment: wlan-add <profile_name> ssid <ssid> [wpa2 <secret>] wlan-add <profile_name> ssid <ssid> [owe_only] wlan-add <profile_name> ssid <ssid> [wpa3 sae] <secret> For static IP address assignment: wlan-add <profile_name> ssid <ssid> ip:<ip_addr>,<gateway_ip>,<netmask> [bssid <bssid>] [channel <channel number>] [wpa2 <secret>] For Micro-AP interface wlan-add <profile_name> ssid <ssid> ip:<ip_addr>,<gateway_ip>,<netmask> role uap [bssid <bssid>] [channel <channelnumber>] [wpa2 <secret>] Error: invalid number of arguments#wlan - add abc ssid nxp_mrvl Added "abc"
#wlan - connect abc Connecting to network... Use 'wlan-stat' for current connection status.
#Connected to following BSS : SSID = [nxp_mrvl], IP = [192.168.10.152]
#wlan - stat
Station connected (Active) uAP stopped#wlan - info
Station connected to: "abc" SSID: nxp_mrvl BSSID: 94:10:3E:02:60:F0 channel: 1 role: Infra security: none IPv4 Address address: DHCP IP: 192.168.10.152 gateway: 192.168.10.1 netmask: 255.255.255.0 dns1: 192.168.10.1 dns2: 0.0.0.0 uAP not started#wlan - add abd ssid NXP_Soft_AP ip : 192.168.10.1, 192.168.10.1, 255.255.255.0 role uap wpa2 12345678 Added "abd"
#wlan - start - network abd
Soft AP "NXP_Soft_AP" Started successfully DHCP Server started successfully#wlan - info
Station connected to: "abc" SSID: nxp_mrvl BSSID: 94:10:3E:02:60:F0 channel: 1 role: Infra security: none IPv4 Address address: DHCP IP: 192.168.10.152 gateway: 192.168.10.1 netmask: 255.255.255.0 dns1: 192.168.10.1 dns2: 0.0.0.0 uAP started as: "abd" SSID: NXP_Soft_AP BSSID: C0:E4:34:5A:99:45 channel: 1 role: uAP security: WPA2 IPv4 Address address: STATIC IP: 192.168.10.1 gateway: 192.168.10.1 netmask: 255.255.255.0 dns1: 192.168.10.1 dns2: 0.0.0.0#wlan - disconnect
#Dis - connected from : nxp_mrvl
[wlcm] Warn: got event: deauthentication#wlan - info
Station not connected uAP started as: "abd" SSID: NXP_Soft_AP BSSID: C0:E4:34:5A:99:45 channel: (Auto) role: uAP security: WPA2 IPv4 Address address: STATIC IP: 192.168.10.1 gateway: 192.168.10.1 netmask: 255.255.255.0 dns1: 192.168.10.1 dns2: 0.0.0.0#wlan - list
2 networks: "abc" SSID: nxp_mrvl BSSID: 00:00:00:00:00:00 channel: (Auto) role: Infra security: none "abd" SSID: NXP_Soft_AP BSSID: 00:00:00:00:00:00 channel: (Auto) role: uAP security: WPA2 IPv4 Address address: STATIC IP: 192.168.10.1 gateway: 192.168.10.1 netmask: 255.255.255.0 dns1: 192.168.10.1 dns2: 0.0.0.0#wlan - remove abc
Removed "abc"#wlan - list
1 network: "abd" SSID: NXP_Soft_AP BSSID: 00:00:00:00:00:00 channel: (Auto) role: uAP security: WPA2 IPv4 Address address: STATIC IP: 192.168.10.1 gateway: 192.168.10.1 netmask: 255.255.255.0 dns1: 192.168.10.1 dns2: 0.0.0.0#wlan - address
not connected#wlan - get
#wlan - get - uap - channel
uAP channel: 0#dhcp - stat DHCP Server Lease Duration : 86400 seconds No IP-MAC mapping stored
No FAQs have been identified for this project.
No URL
Questions regarding the content/correctness of this example can be entered as Issues within this GitHub repository.
Warning: For more general technical questions regarding NXP Microcontrollers and the difference in expected funcionality, enter your questions on the NXP Community Forum
| Version | Description / Update | Date |
|---|---|---|
| 1.0 | Initial release on Application Code Hub | March 26th 2024 |