NXP Application Code Hub
Change the repository type filter
All
Repositories list
131 repositories
- This example demo describes how to configure low-power motion or magnetic wake-up sensor for tamper/theft detection and transmit ALERT to connected end user via BLE wireless UART using FRDM-MCXW71.Such use-case can find many applications where user would like to completely shut off power supply or put the device in power down mode etc.
- The Portable Anomaly Detect demo shows an on-device trainable anomaly detection platform that is based on the FRDM-MCXN947 board. The demo shows how to train the SVM model on-device with FXLS8974CF accelerometer data and inference SVM model on-device too.During the whole life cycle of a device, learning may need to be done multiple times.
- This demo shows how to implement a wireless door chime with the RW612-FRDM board. The chime is controlled over Wi-Fi with the MQTT application protocol. Chime sound data is streamed on the I2S pins of the RW612-FRDM Arduino header. An external codec and also an amplifier are required to play the sound on an external speaker.
ap-frdm-mcx-buspal
PublicThis software pack provides the buspal application ported to different MCX device families. Buspal is an embedded software tool that is available as a companion to blhost. The tool acts as a bus translator with an established connection with blhost over UART and with the target device over I2C, SPI or CANap-dvs-pvt-sensor-rt600
PublicThis repository holds the Dynamic Voltage Scaling Using PVT Sensor Pack on RT600 and depends on the MCUXpresso SDK overall delivery. This application software pack helps NXP customers quickly reduce power and increase battery life. GitHub topics: low-power, power-conversion- This is a demo application which provides a command line interface for these 6 applications of NAFE13388 for Analog to Digital Conversion.<br>Current Sensing using SCSR Conversion Voltage Sensing using SCSR Conversion Voltage Sensing using MCMR Conversion RTD 2/4 Wires using SCCR Conversion Weight Scale
- This demo serves as guide on enabling FXLS897xxx accelerometer over I2C and light sensor over ADC readings. The ADC conversions are trigger by a hardware timer trigger. The I2C transfers make use of CMSIS-Drives. Interact application through the IoT Toolbox using a Smartphone.
- EasyEVSE is a simulated electric vehicle charging station, J1772 compliant, connected to the Microsoft Azure IoT Central over Ethernet or Wi-Fi communication. The provided application is available in 2 flavors. One is the basic enablement, available on github, while the full enablement can be found at nxp.com.
dm-wifi-cli-frdm-mcxn947
Public- his demo application provides various Motor Control interfaces like fault detection (over, under voltage and active current limits etc ) , Fault detection control and Motor can be either control by PWM or SPI. Using PWM speed can be controlled by changing the duty cycles.