[BUG] BSOD stubs.cpp:5 6.1.3+7898 MK4 when booting printer from relay toggle

[Tworck]

Printer model

MK4

Firmware version

6.1.3+7898 MK4 [S][A]

Upgrades and modifications

None

Printing from...

Prusa Connect

Describe the bug

Describe the bug
Blue Screen of Death (BSoD) occurred shortly after sending a print job via PrusaSlicer-2.8.0-beta1 through Prusa Connect. The Prusa Connect tab in the slicer didn't seem to fully load. Checking the printer showed the below error. It happens when I boot the printer via a remote power relay. the power relay is simply turned on/off via the wifi. Turning the relay on provides power to the printer. When the printer does not draw power for 15 minutes the relay assumes that no print is currently active and turns off the relay, thus turning off the printer.

BSOD text (using OCR, image also attached):

BSOD

stubs.cpp:5
aborted
task:defaultTask
SP:10005e90 LR:0802b91d PC:0802b91c
CPUID:04442803 ICSR_:00020200 VTOR_:fa050300
SCR__:00000210 SHCSR:00010000 DFSR_:e000ed34
AFSR_:00000030 ADR__:00100030
bot:10005e3c top:100051ac stack:
0802b91d fffffffc 20003d50 000000000 000000008
000000000 080300e3 ffffffffc 20003d50 000000000
000000008 000000000 080300e3 000000000 10005e5c
00041000 000000000 000000001 0802d701 000000000
000000001 000000000 00100402 000000001 0802fce3
6.1.3+7898 MK4 [S] [A]

How to reproduce

No response

Expected behavior

No response

Files

will provide crash dump via reports email

[Tworck]

PR31333079426