Skip to content

Latest commit

 

History

History
120 lines (86 loc) · 3.18 KB

README.org

File metadata and controls

120 lines (86 loc) · 3.18 KB
Raw

Odyssey 2 Bootloader Programmer

This is a fully C89 POSIX compliant terminal programmer for the Odyssey 2 Bootloader. It runs fine also on Microsoft Windows using mingw64 as toolchain to build the binary. It is compatible with N7DDC protocol but adds a few more commands.

Changes from N7DDC

  • future proof: since it is written in C89 it works everywhere and forever
  • change settings without MIC: you can change the parameters like, 1W power amplifier, audio amplifier and slot without connecting the MIC to the port and press keys. In this way it is fully remote usable.
  • get the radio status with versions and parameters
  • enter into the bootloader from remote
  • for other options see the next section

TO DO

  • local web interface?

Help screen

Just to avoid repeat the work, these are the features available from remote.

Odyssey 2 Bootloader Programmer - Version: 0.1.0

Usage:
./programmer ACTIONS [OPTIONS]

Actions: all require -d
	-t			test if the IP address is alive
	-a			get the bootloader status
	-n			set the new IP address; require -e
	-p			program a new firmware
				require -f and -o optionally; use slot 1 as default
	-x			erase the slot without programming (require -o)
	-b			stop the radio at the bootloader
	-r			reset the device
	-z			boot the radio firmware
	-s			set which slot to boot (require -o)
	-y [0/1]		disable or enable the auto power-on functionality
	-g [0/1]		disable or enable the 1W power amplifier
	-c [0/1]		disable or enable the audio amplifier

Options:
	-d [IP]			set the device IP
	-e [NEW IP]		set the new IP for the device
	-f [RBF]		firmware file with extension .rbf
	-o [SLOT]		which slot to use; from 0 to 3

Notes:
  [IP] must be in form 192.168.1.100 without subnet or CIDR
  [SLOT] is a number from 0 to 3. 0 is the bootloader, so pay attention ;-)

Build

*NIX

Requirements

  • any C compiler that support C89 and it is POSIX compliant GNU gcc or clang for example.
  • make GNU make or BSD make for example.

Build

Quite easy, run the following command ;-)

make

Then you can run the programmer with ./programmer and read the help.

Windows

You can build the windows version in any *NIX or Windows that it is supported by the requirements.

Requirements

  • MinGW-w64 or MinGW
  • make (GNU make or BSD make)

Build

Quite easy, run the following command ;-)

make win

Then you can run the programmer with programmer.exe and read the help.

License

Copyright (C) 2020 Davide Gerhard IV3CVE

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <https://www.gnu.org/licenses/>.