Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

HTTPS boot much slower than HTTP #614

Open
KyleSebion opened this issue Oct 6, 2024 · 0 comments
Open

HTTPS boot much slower than HTTP #614

KyleSebion opened this issue Oct 6, 2024 · 0 comments
Assignees
@peterharperuk

Comments

@KyleSebion
Copy link

Describe the bug

I have a 95M boot.img served over https and http by nginx over a single short network cable. A pi 5 using HTTPS boot takes about 50 s to retrieve boot.img. The pi using HTTP boot takes about 7 s to retrieve boot.img. The pi is using bootloader-2712/stable/pieeprom-2024-09-23.bin. The pi is using a fully up-to-date (as of 2024-10-06) 2024-07-04-raspios-bookworm-arm64.img.

The pi taking about 7.5x longer with HTTPS seems like a bug.

HTTP tcpdump video
HTTPS tcpdump video

Steps to reproduce the behaviour

Time HTTP boot vs. HTTPS boot.

Device (s)

Raspberry Pi 5

Bootloader configuration.

[all]
BOOT_UART=1
POWER_OFF_ON_HALT=0
BOOT_ORDER=0xf127
HTTP_HOST=10.10.11.1
HTTP_CACERT_HASH=21eb943bdeff0e1674521c3240dbcacffcd00d5d8f5f14e21fed1ab59dbf4959

System

System Information
------------------

Raspberry Pi 5 Model B Rev 1.0
PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
NAME="Debian GNU/Linux"
VERSION_ID="12"
VERSION="12 (bookworm)"

Raspberry Pi reference 2024-07-04
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 48efb5fc5485fafdc9de8ad481eb5c09e1182656, stage2

Linux ks-pi 6.6.51+rpt-rpi-2712 #1 SMP PREEMPT Debian 1:6.6.51-1+rpt2 (2024-10-01) aarch64 GNU/Linux
Revision        : d04170
Serial          : bb489a0b356db66a
Model           : Raspberry Pi 5 Model B Rev 1.0
Throttled flag  : throttled=0x0
Camera          : vc_gencmd_read_response returned -1 error=1 error_msg="Command not registered"

Videocore information
---------------------

2024/09/23 14:02:56
Copyright (c) 2012 Broadcom
version 26826259 (release) (embedded)

vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"

Filesystem information
----------------------
Filesystem           1K-blocks    Used Available Use% Mounted on
udev                   3949904       0   3949904   0% /dev
tmpfs                   824560    5392    819168   1% /run
/dev/mapper/ivg-root   4578224 3111360   1219800  72% /
tmpfs                  4122784       0   4122784   0% /dev/shm
tmpfs                     5120      48      5072   1% /run/lock
/dev/sda                 96876   68350     28526  71% /boot/firmware
tmpfs                   824544       0    824544   0% /run/user/1000

Filename                                Type            Size            Used             Priority
/var/swap                               file            204784          0                -2

Package version information
---------------------------
raspberrypi-ui-mods:
  Installed: (none)
raspberrypi-sys-mods:
  Installed: 20240911
openbox:
  Installed: (none)
lxpanel:
  Installed: (none)
pcmanfm:
  Installed: (none)
rpd-plym-splash:
  Installed: (none)

Networking Information
----------------------

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 172278  bytes 245416920 (234.0 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 76605  bytes 26355174 (25.1 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 106

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet x.x.x.x  netmask x.x.x.x
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 10  bytes 1564 (1.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 10  bytes 1564 (1.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wg0: flags=209<UP,POINTOPOINT,RUNNING,NOARP>  mtu 1420
        inet x.x.x.x  netmask x.x.x.x  destination x.x.x.x
        unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  txqueuelen 1000  (UNSPEC)
        RX packets 172073  bytes 240563696 (229.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 76445  bytes 23131812 (22.0 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet x.x.x.x  netmask x.x.x.x  broadcast x.x.x.x
        inet6 y.y.y.y.y.y.y.y  prefixlen 64  scopeid 0x0<global>
        inet6 y::y.y.y.y  prefixlen 64  scopeid 0x20<link>
        ether m.m.m.m  txqueuelen 1000  (Ethernet)
        RX packets 513  bytes 76321 (74.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 357  bytes 52835 (51.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


USB Information
---------------

/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M

Display Information
-------------------

Running (F)KMS, console

/sys/class/drm/card1-HDMI-A-1

/sys/class/drm/card1-HDMI-A-2

/sys/class/drm/card1-Writeback-1

/sys/class/drm/card1-Writeback-2


Connector 0 (32) HDMI-A-1 (disconnected)
  Encoder 0 (31) TMDS
Connector 1 (42) HDMI-A-2 (disconnected)
  Encoder 1 (41) TMDS


HDMI0:             HDMI_HOTPLUG = 0x00000000
HDMI1:             HDMI_HOTPLUG = 0x00000000

/sys/kernel/debug/dri/1/state:
plane[47]: plane-0
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=0
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[65]: plane-1
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=0
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[80]: plane-2
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=0
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[92]: plane-3
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=0
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[104]: plane-4
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=1
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[115]: plane-5
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=2
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[126]: plane-6
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=3
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[137]: plane-7
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=4
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[148]: plane-8
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=5
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[159]: plane-9
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=6
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[170]: plane-10
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=7
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[181]: plane-11
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=8
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[192]: plane-12
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=9
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[203]: plane-13
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=a
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[214]: plane-14
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=b
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[225]: plane-15
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=c
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[236]: plane-16
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=d
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[247]: plane-17
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=e
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[258]: plane-18
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=f
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[269]: plane-19
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=10
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[280]: plane-20
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=11
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[291]: plane-21
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=11
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[302]: plane-22
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=11
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
plane[313]: plane-23
        crtc=(null)
        fb=0
        crtc-pos=0x0+0+0
        src-pos=0.000000x0.000000+0.000000+0.000000
        rotation=1
        normalized-zpos=11
        color-encoding=ITU-R BT.709 YCbCr
        color-range=YCbCr limited range
crtc[58]: mop
        enable=0
        active=0
        self_refresh_active=0
        planes_changed=0
        mode_changed=0
        active_changed=0
        connectors_changed=0
        color_mgmt_changed=0
        plane_mask=0
        connector_mask=0
        encoder_mask=0
        mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[76]: moplet
        enable=0
        active=0
        self_refresh_active=0
        planes_changed=0
        mode_changed=0
        active_changed=0
        connectors_changed=0
        color_mgmt_changed=0
        plane_mask=0
        connector_mask=0
        encoder_mask=0
        mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[91]: crtc-2
        enable=0
        active=0
        self_refresh_active=0
        planes_changed=0
        mode_changed=0
        active_changed=0
        connectors_changed=0
        color_mgmt_changed=0
        plane_mask=0
        connector_mask=0
        encoder_mask=0
        mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[103]: crtc-3
        enable=0
        active=0
        self_refresh_active=0
        planes_changed=0
        mode_changed=0
        active_changed=0
        connectors_changed=0
        color_mgmt_changed=0
        plane_mask=0
        connector_mask=0
        encoder_mask=0
        mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
connector[32]: HDMI-A-1
        crtc=(null)
        self_refresh_aware=0
        max_requested_bpc=8
        colorspace=Default
connector[42]: HDMI-A-2
        crtc=(null)
        self_refresh_aware=0
        max_requested_bpc=8
        colorspace=Default
connector[64]: Writeback-1
        crtc=(null)
        self_refresh_aware=0
        max_requested_bpc=0
        colorspace=Default
connector[79]: Writeback-2
        crtc=(null)
        self_refresh_aware=0
        max_requested_bpc=0
        colorspace=Default



Audio Information
-------------------

**** List of PLAYBACK Hardware Devices ****
card 0: vc4hdmi0 [vc4-hdmi-0], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: vc4hdmi1 [vc4-hdmi-1], device 0: MAI PCM i2s-hifi-0 [MAI PCM i2s-hifi-0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

null
    Discard all samples (playback) or generate zero samples (capture)
default
    Default Audio Device
sysdefault
    Default Audio Device
hw:CARD=vc4hdmi0,DEV=0
    vc4-hdmi-0, MAI PCM i2s-hifi-0
    Direct hardware device without any conversions
plughw:CARD=vc4hdmi0,DEV=0
    vc4-hdmi-0, MAI PCM i2s-hifi-0
    Hardware device with all software conversions
default:CARD=vc4hdmi0
    vc4-hdmi-0, MAI PCM i2s-hifi-0
    Default Audio Device
sysdefault:CARD=vc4hdmi0
    vc4-hdmi-0, MAI PCM i2s-hifi-0
    Default Audio Device
hdmi:CARD=vc4hdmi0,DEV=0
    vc4-hdmi-0, MAI PCM i2s-hifi-0
    HDMI Audio Output
dmix:CARD=vc4hdmi0,DEV=0
    vc4-hdmi-0, MAI PCM i2s-hifi-0
    Direct sample mixing device
hw:CARD=vc4hdmi1,DEV=0
    vc4-hdmi-1, MAI PCM i2s-hifi-0
    Direct hardware device without any conversions
plughw:CARD=vc4hdmi1,DEV=0
    vc4-hdmi-1, MAI PCM i2s-hifi-0
    Hardware device with all software conversions
default:CARD=vc4hdmi1
    vc4-hdmi-1, MAI PCM i2s-hifi-0
    Default Audio Device
sysdefault:CARD=vc4hdmi1
    vc4-hdmi-1, MAI PCM i2s-hifi-0
    Default Audio Device
hdmi:CARD=vc4hdmi1,DEV=0
    vc4-hdmi-1, MAI PCM i2s-hifi-0
    HDMI Audio Output
dmix:CARD=vc4hdmi1,DEV=0
    vc4-hdmi-1, MAI PCM i2s-hifi-0
    Direct sample mixing device

Failed to connect to bus: No medium found

pactl not installed

config.txt
----------

arm_64bit=1
arm_boost=1
arm_freq=2400
arm_freq_min=1500
arm_peri_high=1
audio_pwm_mode=2
auto_initramfs=1
avs_temp=64208
camera_auto_detect=1
core_freq=910
core_freq_min=500
disable_commandline_tags=2
disable_fw_kms_setup=1
disable_l2cache=1
disable_overscan=1
display_auto_detect=1
display_default_lcd=-1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=4
enable_gic=1
enable_uart=-1
force_eeprom_read=1
force_pwm_open=1
framebuffer_depth=16
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq_min=500
hdmi_enable_4kp60=1
hevc_freq=910
hevc_freq_min=500
ignore_lcd=-1
init_uart_clock=0x2dc6c00
isp_freq=910
isp_freq_min=500
mask_gpu_interrupt1=16418
max_framebuffers=2
over_voltage_avs=0x31a24
pause_burst_frames=1
pciex4_reset=1
pmic_turbo_threshold=600
program_serial_random=1
total_mem=8192
usb_max_current_enable=1
v3d_freq=960
v3d_freq_min=500
vpred=9633
vpred_max=9633
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt
-----------
reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe  smsc95xx.macaddr=D8:3A:DD:F6:24:B0 vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=tty1 fsck.repair=yes plymouth.ignore-serial-consoles logo.nologo panic=5 ip=10.10.11.2::10.10.11.1:255.255.255.0::eth0:off root=LABEL=rootfs rw cfg80211.ieee80211_regdom=US

pin configuration
-----------------

 0: ip    pu | hi // ID_SDA/GPIO0 = input
 1: ip    pu | hi // ID_SCL/GPIO1 = input
 2: no    pu | -- // GPIO2 = none
 3: no    pu | -- // GPIO3 = none
 4: no    pu | -- // GPIO4 = none
 5: no    pu | -- // GPIO5 = none
 6: no    pu | -- // GPIO6 = none
 7: no    pu | -- // GPIO7 = none
 8: no    pu | -- // GPIO8 = none
 9: no    pd | -- // GPIO9 = none
10: no    pd | -- // GPIO10 = none
11: no    pd | -- // GPIO11 = none
12: no    pd | -- // GPIO12 = none
13: no    pd | -- // GPIO13 = none
14: no    pd | -- // GPIO14 = none
15: no    pd | -- // GPIO15 = none
16: no    pd | -- // GPIO16 = none
17: no    pd | -- // GPIO17 = none
18: no    pd | -- // GPIO18 = none
19: no    pd | -- // GPIO19 = none
20: no    pd | -- // GPIO20 = none
21: no    pd | -- // GPIO21 = none
22: no    pd | -- // GPIO22 = none
23: no    pd | -- // GPIO23 = none
24: no    pd | -- // GPIO24 = none
25: no    pd | -- // GPIO25 = none
26: no    pd | -- // GPIO26 = none
27: no    pd | -- // GPIO27 = none
28: ip    pd | lo // PCIE_RP1_WAKE/GPIO28 = input
29: no    pu | hi // FAN_TACH/GPIO29 = none
30: no    pu | -- // HOST_SDA/GPIO30 = none
31: no    pu | -- // HOST_SCL/GPIO31 = none
32: op dh pd | hi // ETH_RST_N/GPIO32 = output
33: no    pd | lo // GPIO33 = none
34: op dl pd | lo // CD0_IO0_MICCLK/GPIO34 = output
35: no    pd | lo // CD0_IO0_MICDAT0/GPIO35 = none
36: no    pd | lo // RP1_PCIE_CLKREQ_N/GPIO36 = none
37: no    pd | lo // GPIO37 = none
38: ip    pd | hi // CD0_SDA/GPIO38 = input
39: ip    pd | hi // CD0_SCL/GPIO39 = input
40: ip    pd | hi // CD1_SDA/GPIO40 = input
41: ip    pd | hi // CD1_SCL/GPIO41 = input
42: a2    pd | hi // USB_VBUS_EN/GPIO42 = VBUS_EN1
43: a2    pu | hi // USB_OC_N/GPIO43 = VBUS_OC1
44: op dh pd | hi // RP1_STAT_LED/GPIO44 = output
45: ip    pd | lo // FAN_PWM/GPIO45 = input
46: op dl pd | lo // CD1_IO0_MICCLK/GPIO46 = output
47: no    pd | lo // 2712_WAKE/GPIO47 = none
48: no    pd | lo // CD1_IO1_MICDAT1/GPIO48 = none
49: op dh pd | hi // EN_MAX_USB_CUR/GPIO49 = output
50: no    pd | -- // GPIO50 = none
51: no    pd | -- // GPIO51 = none
52: no    pu | -- // GPIO52 = none
53: no    pu | hi // GPIO53 = none
100: ip    pd | lo // GPIO0 = input
101: op dh pu | hi // 2712_BOOT_CS_N/GPIO1 = output
102: a6    pn | hi // 2712_BOOT_MISO/GPIO2 = VC_SPI0_MISO
103: a5    pn | hi // 2712_BOOT_MOSI/GPIO3 = VC_SPI0_MOSI
104: a6    pn | lo // 2712_BOOT_SCLK/GPIO4 = VC_SPI0_SCLK
105: ip    pd | lo // GPIO5 = input
106: ip    pd | lo // GPIO6 = input
107: ip    pd | lo // GPIO7 = input
108: ip    pd | lo // GPIO8 = input
109: ip    pd | lo // GPIO9 = input
110: ip    pd | lo // GPIO10 = input
111: ip    pd | lo // GPIO11 = input
112: ip    pd | lo // GPIO12 = input
113: ip    pd | lo // GPIO13 = input
114: a1    pd | lo // PCIE_SDA/GPIO14 = SPI_S_MOSI_OR_BSC_S_SDA
115: a1    pd | lo // PCIE_SCL/GPIO15 = SPI_S_SCK_OR_BSC_S_SCL
116: ip    pd | lo // GPIO16 = input
117: ip    pd | lo // GPIO17 = input
118: ip    pd | lo // GPIO18 = input
119: ip    pd | lo // GPIO19 = input
120: ip    pu | hi // PWR_GPIO/GPIO20 = input
121: ip    pd | lo // 2712_G21_FS/GPIO21 = input
122: ip    pd | lo // GPIO22 = input
123: ip    pd | lo // GPIO23 = input
124: a3    pn | lo // BT_RTS/GPIO24 = UART_RTS_0
125: a4    pu | lo // BT_CTS/GPIO25 = UART_CTS_0
126: a4    pn | hi // BT_TXD/GPIO26 = UART_TXD_0
127: a4    pu | hi // BT_RXD/GPIO27 = UART_RXD_0
128: op dh pd | hi // WL_ON/GPIO28 = output
129: op dh pd | hi // BT_ON/GPIO29 = output
130: a4    pn | lo // WIFI_SDIO_CLK/GPIO30 = SD2_CLK
131: a4    pu | hi // WIFI_SDIO_CMD/GPIO31 = SD2_CMD
132: a4    pd | hi // WIFI_SDIO_D0/GPIO32 = SD2_DAT0
133: a3    pu | hi // WIFI_SDIO_D1/GPIO33 = SD2_DAT1
134: a4    pn | hi // WIFI_SDIO_D2/GPIO34 = SD2_DAT2
135: a3    pn | hi // WIFI_SDIO_D3/GPIO35 = SD2_DAT3
200: ip    pd | hi // RP1_SDA/AON_GPIO0 = input
201: ip    pd | hi // RP1_SCL/AON_GPIO1 = input
202: op dh pd | hi // RP1_RUN/AON_GPIO2 = output
203: op dl pd | lo // SD_IOVDD_SEL/AON_GPIO3 = output
204: op dl pd | lo // SD_PWR_ON/AON_GPIO4 = output
205: a6    pu | hi // SD_CDET_N/AON_GPIO5 = SD_CARD_PRES_G
206: ip    pd | hi // SD_FLG_N/AON_GPIO6 = input
207: ip    pd | lo // AON_GPIO7 = input
208: ip    pd | lo // 2712_WAKE/AON_GPIO8 = input
209: op dh pd | hi // 2712_STAT_LED/AON_GPIO9 = output
210: ip    pd | lo // AON_GPIO10 = input
211: ip    pd | lo // AON_GPIO11 = input
212: ip    pd | lo // PMIC_INT/AON_GPIO12 = input
213: a3    pu | hi // UART_TX_FS/AON_GPIO13 = VC_TXD0
214: a3    pu | hi // UART_RX_FS/AON_GPIO14 = VC_RXD0
215: ip    pd | lo // AON_GPIO15 = input
216: ip    pu | hi // AON_GPIO16 = input
232: a1    -- | hi // HDMI0_SCL/AON_SGPIO0 = HDMI_TX0_BSC_SCL
233: a1    -- | hi // HDMI0_SDA/AON_SGPIO1 = HDMI_TX0_BSC_SDA
234: a1    -- | hi // HDMI1_SCL/AON_SGPIO2 = HDMI_TX1_BSC_SCL
235: a1    -- | hi // HDMI1_SDA/AON_SGPIO3 = HDMI_TX1_BSC_SDA
236: a2    -- | hi // PMIC_SCL/AON_SGPIO4 = BSC_M2_SCL
237: a2    -- | hi // PMIC_SDA/AON_SGPIO5 = BSC_M2_SDA

vcdbg log messages
------------------

082685.122: Initial voltage 800000 temp 64208
082882.540: avs_2712: AVS pred 9633 963300 temp 64208
082882.551: vpred 963 mV +0
083506.483: FB framebuffer_swap 1
083506.502: Select resolution HDMI0/2 hotplug 0 max_mode 2
083506.517: Select resolution HDMI1/2 hotplug 0 max_mode 2
083689.200: dtb_file 'bcm2712-rpi-5-b.dtb'
083756.598: dtparam: audio=on
083761.039: Unknown dtparam 'audio' - ignored
083806.770: Loaded overlay 'vc4-kms-v3d-pi5'
086668.349: BSC_A no ACK
086668.528: BSC_A no ACK
086668.713: BSC_A no ACK
086688.896: BSC_B no ACK
086689.081: BSC_B no ACK
086689.264: BSC_B no ACK
086709.291: Starting OS 86709 ms
086711.929: 00000040: -> 00000480
086711.944: 00000030: -> 00100080
086711.961: 00000034: -> 00100080
086711.975: 00000038: -> 00100080
086711.991: 0000003c: -> 00100080
086814.016: sdram: sdram refresh 2081->4162 (2)


dmesg log
---------

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[    0.000000] Linux version 6.6.51+rpt-rpi-2712 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.51-1+rpt2 (2024-10-01)
[    0.000000] KASLR enabled
[    0.000000] random: crng init done
[    0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[    0.000000] efi: UEFI not found.
[    0.000000] Reserved memory: created CMA memory pool at 0x0000000002000000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool[    0.000000] OF: reserved mem: 0x0000000002000000..0x0000000015ffffff (327680 KiB) map reusable linux,cma
[    0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[    0.000000] OF: reserved mem: 0x000000003fd117e8..0x000000003fd118ef (0 KiB) nomap non-reusable nvram@1
[    0.000000] OF: reserved mem: 0x000000003fd165c0..0x000000003fd166b1 (0 KiB) nomap non-reusable nvram@0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000007ffff]
[    0.000000]   node   0: [mem 0x0000000000080000-0x000000003fbfffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000001ffffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 14 pages/cpu s183976 r8192 d37208 u229376
[    0.000000] pcpu-alloc: s183976 r8192 d37208 u229376 alloc=14*16384
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: detected: Virtualization Host Extensions
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] CPU features: detected: Spectre-v4
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: SSBS not fully self-synchronizing
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe  smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000  console=tty1 fsck.repair=yes plymouth.ignore-serial-consoles logo.nologo panic=5 ip=10.10.11.y::y.y.y.y.10.11.1:255.255.255.y::y.y.y.yth0:off root=LABEL=rootfs rw cfg80211.ieee80211_regdom=US
[    0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 521984
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[    0.000000] Memory: 7899824K/8384512K available (13440K kernel code, 2224K rwdata, 4304K rodata, 5056K init, 1213K bss, 157008K reserved, 327680K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 43243 entries in 43 pages
[    0.000000] ftrace: allocated 43 pages with 4 groups
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Rude variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns[    0.000160] Console: colour dummy device 80x25
[    0.000165] printk: console [tty1] enabled
[    0.000341] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000349] pid_max: default: 32768 minimum: 301
[    0.000372] LSM: initializing lsm=capability,integrity
[    0.000434] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[    0.000462] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)[    0.000800] cgroup: Disabling memory control group subsystem
[    0.001225] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001257] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001283] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.001353] rcu: Hierarchical SRCU implementation.
[    0.001357] rcu:     Max phase no-delay instances is 1000.
[    0.002005] EFI services will not be available.
[    0.002087] smp: Bringing up secondary CPUs ...
[    0.002255] Detected PIPT I-cache on CPU1
[    0.002297] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[    0.002485] Detected PIPT I-cache on CPU2
[    0.002517] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[    0.002689] Detected PIPT I-cache on CPU3
[    0.002719] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[    0.002744] smp: Brought up 1 node, 4 CPUs
[    0.002763] SMP: Total of 4 processors activated.
[    0.002768] CPU features: detected: 32-bit EL0 Support
[    0.002772] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.002777] CPU features: detected: Common not Private translations
[    0.002780] CPU features: detected: CRC32 instructions
[    0.002784] CPU features: detected: RCpc load-acquire (LDAPR)
[    0.002788] CPU features: detected: LSE atomic instructions
[    0.002792] CPU features: detected: Privileged Access Never
[    0.002795] CPU features: detected: RAS Extension Support
[    0.002800] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    0.002835] CPU: All CPU(s) started at EL2
[    0.002839] alternatives: applying system-wide alternatives
[    0.004499] devtmpfs: initialized
[    0.007482] Enabled cp15_barrier support
[    0.007493] Enabled setend support
[    0.007548] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.007557] futex hash table entries: 1024 (order: 2, 65536 bytes, linear)
[    0.008437] pinctrl core: initialized pinctrl subsystem
[    0.008582] DMI not present or invalid.
[    0.008760] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.009377] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.009425] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.009477] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations[    0.009498] audit: initializing netlink subsys (disabled)
[    0.009553] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[    0.009669] thermal_sys: Registered thermal governor 'step_wise'
[    0.009681] cpuidle: using governor menu
[    0.009742] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.009772] ASID allocator initialised with 32768 entries
[    0.010108] Serial: AMBA PL011 UART driver
[    0.011109] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[    0.011462] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 15, base_baud = 0) is a PL011 rev2
[    0.020163] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-09-23T13:02:56, variant start_cd
[    0.024166] raspberrypi-firmware soc:firmware: Firmware hash is 2682625900000000000000000000000000000000
[    0.030598] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[    0.030604] Modules: 0 pages in range for non-PLT usage
[    0.030606] Modules: 129408 pages in range for PLT usage
[    0.034902] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[    0.035271] iommu: Default domain type: Translated
[    0.035275] iommu: DMA domain TLB invalidation policy: strict mode
[    0.035370] SCSI subsystem initialized
[    0.035413] usbcore: registered new interface driver usbfs
[    0.035424] usbcore: registered new interface driver hub
[    0.035435] usbcore: registered new device driver usb
[    0.035519] pps_core: LinuxPPS API ver. 1 registered
[    0.035523] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.035530] PTP clock support registered
[    0.035808] vgaarb: loaded
[    0.035900] clocksource: Switched to clocksource arch_sys_counter
[    0.036012] VFS: Disk quotas dquot_6.6.0
[    0.036025] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[    0.036056] FS-Cache: Loaded
[    0.038546] CacheFiles: Loaded
[    0.040005] NET: Registered PF_INET protocol family
[    0.040150] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, linear)
[    0.042521] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, linear)
[    0.042569] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, linear)
[    0.042576] TCP established hash table entries: 65536 (order: 5, 524288 bytes, linear)
[    0.042847] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, linear)
[    0.044434] TCP: Hash tables configured (established 65536 bind 65536)
[    0.044577] MPTCP token hash table entries: 8192 (order: 3, 196608 bytes, linear)
[    0.044689] UDP hash table entries: 4096 (order: 3, 131072 bytes, linear)
[    0.044792] UDP-Lite hash table entries: 4096 (order: 3, 131072 bytes, linear)
[    0.044946] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.045086] RPC: Registered named UNIX socket transport module.
[    0.045091] RPC: Registered udp transport module.
[    0.045094] RPC: Registered tcp transport module.
[    0.045097] RPC: Registered tcp-with-tls transport module.
[    0.045100] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.045107] PCI: CLS 0 bytes, default 64
[    0.045196] Trying to unpack rootfs image as initramfs...
[    0.051980] kvm [1]: IPA Size Limit: 40 bits
[    0.051999] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[    0.052022] kvm [1]: vgic interrupt IRQ9
[    0.052039] kvm [1]: VHE mode initialized successfully
[    0.324702] Initialise system trusted keyrings
[    0.324808] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.324831] zbud: loaded
[    0.325027] NFS: Registering the id_resolver key type
[    0.325037] Key type id_resolver registered
[    0.325040] Key type id_legacy registered
[    0.325048] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.325052] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.325109] F2FS not supported on PAGE_SIZE(16384) != 4096
[    0.325163] Key type asymmetric registered
[    0.325167] Asymmetric key parser 'x509' registered
[    0.325183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.325231] io scheduler mq-deadline registered
[    0.325236] io scheduler kyber registered
[    0.325248] io scheduler bfq registered
[    0.328139] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7c502000, parent irq: 26)
[    0.328209] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d503000, parent irq: 27)
[    0.328264] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508380, parent irq: 28)
[    0.328310] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d508400, parent irq: 29)
[    0.328362] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7d510600, parent irq: 30)
[    0.328409] irq_brcmstb_l2: registered L2 intc (/soc/intc@7d517b00, parent irq: 31)
[    0.362925] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.363365] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
[    0.363427] serial serial0: tty port ttyS0 registered
[    0.363763] iproc-rng200 107d208000.rng: hwrng registered
[    0.363825] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[    0.364069] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[    0.366043] brd: module loaded
[    0.367511] loop: module loaded
[    0.367642] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    0.367775] Loading iSCSI transport class v2.0-870.
[    0.368745] usbcore: registered new device driver r8152-cfgselector
[    0.368757] usbcore: registered new interface driver r8152
[    0.368766] usbcore: registered new interface driver lan78xx
[    0.368774] usbcore: registered new interface driver smsc95xx
[    0.368835] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.368860] dwc_otg: FIQ enabled
[    0.368861] dwc_otg: NAK holdoff enabled
[    0.368862] dwc_otg: FIQ split-transaction FSM enabled
[    0.368865] Module dwc_common_port init
[    0.369007] usbcore: registered new interface driver uas
[    0.369021] usbcore: registered new interface driver usb-storage
[    0.369133] mousedev: PS/2 mouse device common for all mice
[    0.377494] rpi-rtc soc:rpi_rtc: registered as rtc0
[    0.379010] rpi-rtc soc:rpi_rtc: setting system clock to 2024-10-06T20:07:32 UTC (1728245252)
[    0.379361] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[    0.379367] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.381776] sdhci: Secure Digital Host Controller Interface driver
[    0.381782] sdhci: Copyright(c) Pierre Ossman
[    0.381827] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.382033] ledtrig-cpu: registered to indicate activity on CPUs
[    0.382084] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    0.382101] hid: raw HID events driver (C) Jiri Kosina
[    0.382130] usbcore: registered new interface driver usbhid
[    0.382133] usbhid: USB HID core driver
[    0.382473] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 counters available
[    0.382846] NET: Registered PF_PACKET protocol family
[    0.382876] Key type dns_resolver registered
[    0.388496] registered taskstats version 1
[    0.388573] Loading compiled-in X.509 certificates
[    0.391050] Key type .fscrypt registered
[    0.391055] Key type fscrypt-provisioning registered
[    0.391778] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@120000 ranges:
[    0.391789] brcm-pcie 1000120000.pcie:   No bus range found for /axi/pcie@120000, using [bus 00-ff]
[    0.391803] brcm-pcie 1000120000.pcie:      MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[    0.391812] brcm-pcie 1000120000.pcie:      MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[    0.391823] brcm-pcie 1000120000.pcie:   IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[    0.391831] brcm-pcie 1000120000.pcie:   IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[    0.393199] brcm-pcie 1000120000.pcie: Forcing gen 2
[    0.393420] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0000:00
[    0.393425] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.393432] pci_bus 0000:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[    0.393438] pci_bus 0000:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[    0.393455] pci 0000:00:00.0: [14e4:2712] type 01 class 0x060400
[    0.393483] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.394425] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring[    0.499911] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[    0.499948] pci 0000:01:00.0: [1de4:0001] type 00 class 0x020000
[    0.499966] pci 0000:01:00.0: reg 0x10: [mem 0xffffc000-0xffffffff]
[    0.499976] pci 0000:01:00.0: reg 0x14: [mem 0xffc00000-0xffffffff]
[    0.499985] pci 0000:01:00.0: reg 0x18: [mem 0xffff0000-0xffffffff]
[    0.500060] pci 0000:01:00.0: supports D1
[    0.500064] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.511915] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    0.511931] pci 0000:00:00.0: BAR 8: assigned [mem 0x1f00000000-0x1f005fffff]
[    0.511937] pci 0000:01:00.0: BAR 1: assigned [mem 0x1f00000000-0x1f003fffff]
[    0.511945] pci 0000:01:00.0: BAR 2: assigned [mem 0x1f00400000-0x1f0040ffff]
[    0.511952] pci 0000:01:00.0: BAR 0: assigned [mem 0x1f00410000-0x1f00413fff]
[    0.511959] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.511964] pci 0000:00:00.0:   bridge window [mem 0x1f00000000-0x1f005fffff]
[    0.511971] pci 0000:00:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
[    0.511983] pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
[    0.512086] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    0.512128] pcieport 0000:00:00.0: PME: Signaling with IRQ 38
[    0.512233] pcieport 0000:00:00.0: AER: enabled with IRQ 38
[    0.512330] rp1 0000:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[    0.512337] rp1 0000:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[    0.512350] rp1 0000:01:00.0: enabling device (0000 -> 0002)
[    0.513261] rp1 0000:01:00.0: chip_id 0x20001927
[    0.518318] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 100
[    1.946570] Freeing initrd memory: 13024K
[    1.951418] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (m.m.m.m)
[    1.952031] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[    1.952323] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    1.952333] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[    1.952781] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[    1.952799] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000
[    1.952870] xhci-hcd xhci-hcd.0: xHCI Host Controller
[    1.952875] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[    1.952881] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[    1.952937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    1.952944] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.952949] usb usb1: Product: xHCI Host Controller
[    1.952953] usb usb1: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[    1.952957] usb usb1: SerialNumber: xhci-hcd.0
[    1.953104] hub 1-0:1.0: USB hub found
[    1.953119] hub 1-0:1.0: 2 ports detected
[    1.953260] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    1.953266] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.953271] usb usb2: Product: xHCI Host Controller
[    1.953275] usb usb2: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[    1.953280] usb usb2: SerialNumber: xhci-hcd.0
[    1.953367] hub 2-0:1.0: USB hub found
[    1.953385] hub 2-0:1.0: 1 port detected
[    1.953689] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    1.953696] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[    1.954139] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000008000000810
[    1.954156] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000
[    1.954227] xhci-hcd xhci-hcd.1: xHCI Host Controller
[    1.954232] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[    1.954239] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[    1.954283] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[    1.954289] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.954294] usb usb3: Product: xHCI Host Controller
[    1.954298] usb usb3: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[    1.954302] usb usb3: SerialNumber: xhci-hcd.1
[    1.954407] hub 3-0:1.0: USB hub found
[    1.954421] hub 3-0:1.0: 2 ports detected
[    1.954544] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
[    1.954550] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.954555] usb usb4: Product: xHCI Host Controller
[    1.954559] usb usb4: Manufacturer: Linux 6.6.51+rpt-rpi-2712 xhci-hcd
[    1.954563] usb usb4: SerialNumber: xhci-hcd.1
[    1.954652] hub 4-0:1.0: USB hub found
[    1.954665] hub 4-0:1.0: 1 port detected
[    1.955291] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774[    1.955610] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu[    1.955617] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu[    1.955625] platform 1000800000.codec: Adding to iommu group 0
[    1.955638] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[    1.955644] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[    1.955652] platform 1000880000.pisp_be: Adding to iommu group 0
[    1.955676] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[    1.955681] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu[    1.955688] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[    1.956050] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774[    1.956342] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[    1.956349] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[    1.956356] platform axi:gpu: Adding to iommu group 1
[    1.956379] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[    1.956386] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[    1.956705] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774[    1.957007] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[    1.957417] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[    1.957536] mmc0: CQHCI version 5.10
[    1.957759] mmc1: CQHCI version 5.10
[    1.958391] of_cfs_init
[    1.958425] of_cfs_init: OK
[    1.991954] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit[    2.146478] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit[    2.152621] macb 1f00100000.ethernet eth0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[    2.152631] macb 1f00100000.ethernet eth0: configuring for phy/rgmii-id link mode
[    2.155306] pps pps0: new PPS source ptp0
[    2.155340] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[    2.176439] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[    6.245017] macb 1f00100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control tx
[    6.275900] IP-Config: Complete:
[    6.275904]      device=eth0, hwaddr=m.m.m.m, ipaddr=10.10.11.2, mask=255.255.255.0, gw=10.10.11.1
[    6.275911]      host=10.10.11.2, domain=, nis-domain=(none)
[    6.275915]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    6.276014] clk: Disabling unused clocks
[    6.288810] Freeing unused kernel memory: 5056K
[    6.288864] Run /init as init process
[    6.288867]   with arguments:
[    6.288868]     /init
[    6.288869]   with environment:
[    6.288870]     HOME=/
[    6.288872]     TERM=linux
[    6.408493] input: pwr_button as /devices/platform/pwr_button/input/input0
[    6.423577] brcmstb-i2c 107d508200.i2c:  @97500hz registered in interrupt mode
[    6.423843] brcmstb-i2c 107d508280.i2c:  @97500hz registered in interrupt mode
[    6.501886] NET: Registered PF_INET6 protocol family
[    6.502314] Segment Routing with IPv6
[    6.502328] In-situ OAM (IOAM) with IPv6
[    6.505055] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    6.505066] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[    6.584678] iscsi: registered transport (tcp)
[   12.596981] scsi host0: iSCSI Initiator over TCP/IP
[   12.609322] scsi 0:0:0:0: Direct-Access     LIO-ORG  boot             4.0  PQ: 0 ANSI: 6
[   12.621551] sd 0:0:0:0: [sda] 194560 512-byte logical blocks: (99.6 MB/95.0 MiB)
[   12.621846] sd 0:0:0:0: [sda] Write Protect is off
[   12.621853] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 08
[   12.622027] scsi 0:0:0:1: Direct-Access     LIO-ORG  root             4.0  PQ: 0 ANSI: 6
[   12.622334] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   12.622939] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[   12.622945] sd 0:0:0:0: [sda] Optimal transfer size 8388608 bytes
[   12.625698]  sda:
[   12.625732] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.630745] sd 0:0:0:1: [sdb] 10485760 512-byte logical blocks: (5.37 GB/5.00 GiB)
[   12.630987] sd 0:0:0:1: [sdb] Write Protect is off
[   12.630995] sd 0:0:0:1: [sdb] Mode Sense: 43 00 00 08
[   12.631484] sd 0:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   12.632206] sd 0:0:0:1: [sdb] Preferred minimum I/O size 512 bytes
[   12.632219] sd 0:0:0:1: [sdb] Optimal transfer size 8388608 bytes
[   12.635436] sd 0:0:0:1: [sdb] Attached SCSI disk
[   12.722848] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[   22.000761] EXT4-fs (dm-2): mounted filesystem 56f80fa2-e005-4cca-86e6-19da1069914d r/w with ordered data mode. Quota mode: none.
[   22.306818] systemd[1]: systemd 252.30-1~deb12u2 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[   22.306842] systemd[1]: Detected architecture arm64.
[   22.310552] systemd[1]: Hostname set to <ks-pi>.
[   22.570059] systemd[1]: Queued start job for default target multi-user.target.
[   22.588524] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[   22.588925] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[   22.589221] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[   22.589409] systemd[1]: Created slice user.slice - User and Session Slice.
[   22.589508] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[   22.589597] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[   22.589812] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[   22.589877] systemd[1]: Expecting device dev-disk-by\x2dlabel-bootfs.device - /dev/disk/by-label/bootfs...
[   22.589926] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[   22.589981] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[   22.590053] systemd[1]: Reached target paths.target - Path Units.
[   22.590113] systemd[1]: Reached target slices.target - Slice Units.
[   22.590165] systemd[1]: Reached target swap.target - Swaps.
[   22.590218] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[   22.590330] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[   22.590487] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[   22.590616] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[   22.590709] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   22.590992] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[   22.591164] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   22.591323] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   22.591506] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   22.591633] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   22.591816] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[   22.592632] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   22.593679] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   22.594716] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...[   22.594914] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
[   22.597298] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[   22.600928] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[   22.603830] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   22.605638] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   22.607003] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
[   22.609458] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...[   22.611587] systemd[1]: Starting [email protected] - Load Kernel Module drm...
[   22.614810] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   22.618852] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
[   22.621204] systemd[1]: Starting [email protected] - Load Kernel Module loop...
[   22.621746] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   22.625383] systemd[1]: Starting systemd-journald.service - Journal Service...
[   22.647824] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   22.650913] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   22.654084] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   22.658265] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   22.659000] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   22.660729] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   22.661250] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   22.661852] systemd[1]: [email protected]: Deactivated successfully.
[   22.662039] systemd[1]: Finished [email protected] - Load Kernel Module configfs.
[   22.662446] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   22.662581] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[   22.662946] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   22.663094] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   22.663446] systemd[1]: [email protected]: Deactivated successfully.
[   22.663759] systemd[1]: Finished [email protected] - Load Kernel Module loop.
[   22.670860] fuse: init (API version 7.39)
[   22.672898] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   22.675591] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[   22.676219] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[   22.683738] systemd[1]: [email protected]: Deactivated successfully.
[   22.684520] systemd[1]: Finished [email protected] - Load Kernel Module fuse.
[   22.685318] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[   22.687079] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   22.692551] EXT4-fs (dm-2): re-mounted 56f80fa2-e005-4cca-86e6-19da1069914d r/w. Quota mode: none.
[   22.711966] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[   22.712821] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[   22.713024] systemd[1]: Started systemd-journald.service - Journal Service.
[   22.732072] systemd-journald[703]: Received client request to flush runtime journal.
[   23.178918] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   23.180556] sd 0:0:0:1: Attached scsi generic sg1 type 0
[   23.357893] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[   23.360471] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[   23.362544] mc: Linux media interface: v0.10
[   23.362618] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[   23.372975] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[   23.387012] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[   23.397145] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[   23.397236] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[   23.397312] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[   23.397436] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[   23.397510] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[   23.431956]  sda:
[   23.458783] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   23.464030] videodev: Linux video capture interface: v2.00
[   23.469427] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   23.469875] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   23.470197] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   23.470513] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   23.514942] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[   23.541836] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[   23.542694] [drm] Initialized v3d 1.0.0 20180419 for 1002000000.v3d on minor 0
[   23.543731] rpivid 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[   23.551728] rpivid 1000800000.codec: Device registered as /dev/video19
[   23.566961] brcmfmac: F1 signature read @0x18000000=0x15264345
[   23.569415] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[   23.594732] usbcore: registered new interface driver brcmfmac
[   23.621142] pispbe 1000880000.pisp_be: Runtime PM usage count underflow!
[   23.622770] Bluetooth: Core ver 2.22
[   23.622797] NET: Registered PF_BLUETOOTH protocol family
[   23.622800] Bluetooth: HCI device and connection manager initialized
[   23.622970] Bluetooth: HCI socket layer initialized
[   23.622974] Bluetooth: L2CAP socket layer initialized
[   23.622981] Bluetooth: SCO socket layer initialized
[   23.741450] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[   23.741996] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[   23.760420] Bluetooth: HCI UART driver ver 2.3
[   23.760429] Bluetooth: HCI UART protocol H4 registered
[   23.760471] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   23.760682] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[   23.760759] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[   23.760796] Bluetooth: HCI UART protocol Broadcom registered
[   24.031694] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[   24.034849] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[   24.036242] Registered IR keymap rc-cec
[   24.036362] rc rc0: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0
[   24.036472] input: vc4-hdmi-0 as /devices/platform/soc/107c701400.hdmi/rc/rc0/input1
[   24.037780] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc/107c701400.hdmi/sound/card0/input2
[   24.037993] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[   24.046196] Registered IR keymap rc-cec
[   24.046270] rc rc1: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1
[   24.046330] input: vc4-hdmi-1 as /devices/platform/soc/107c706400.hdmi/rc/rc1/input3
[   24.057362] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc/107c706400.hdmi/sound/card1/input4
[   24.057530] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[   24.057680] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[   24.057762] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[   24.057841] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[   24.057914] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[   24.061824] [drm] Initialized vc4 0.0.0 20140616 for axi:gpu on minor 1
[   24.064074] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[   24.066318] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[   24.068488] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[   24.121086] Bluetooth: hci0: BCM: chip id 107
[   24.121469] Bluetooth: hci0: BCM: features 0x2f
[   24.126239] Bluetooth: hci0: BCM4345C0
[   24.126248] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[   24.147613] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch[   24.232194] Adding 204784k swap on /var/swap.  Priority:-2 extents:2 across:245744k
[   24.272510] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.272517] Bluetooth: BNEP filters: protocol multicast
[   24.272524] Bluetooth: BNEP socket layer initialized
[   24.790640] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   24.888540] Bluetooth: hci0: BCM: features 0x2f
[   24.889919] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[   24.889926] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[   24.890271] Bluetooth: hci0: BCM: Using default device address (m.m.m.m)
[   24.912146] Bluetooth: MGMT ver 1.22
[   24.916951] NET: Registered PF_ALG protocol family
[   50.400839] systemd[1328]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set

EEPROM
------

BOOTLOADER: up to date
   CURRENT: Mon Sep 23 01:02:56 PM UTC 2024 (1727096576)
    LATEST: Mon Sep 23 01:02:56 PM UTC 2024 (1727096576)
   RELEASE: default (/lib/firmware/raspberrypi/bootloader-2712/default)
            Use raspi-config to change the release.

Bootloader logs

No response

USB boot

No response

NVMe boot

No response

Network (TFTP boot)

No response
@peterharperuk peterharperuk self-assigned this Oct 23, 2024
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@peterharperuk peterharperuk

Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@KyleSebion @peterharperuk