The code in this repository, is provided and maintained on a community basis, and is not covered by any IBM commercial support agreement or warranty.
For issues and fixes please just raise an issue against this repository.
When your application needs messaging, you don't want to spend countless hours learning the basics, you want to jump straight in and play, see how things work.
We have taken parts that make up the current set of our IBM MQ samples and built applications that you can use to do just that.
You'll find put/get, pub/sub, request/response samples that you can run in the same language or you can try mixing things up and do a put in Java, get with Go etc.
There is a README for each language that helps you with the initial setup.
You need an MQ server with a queue or topic to run these samples against. To find out more about what MQ is and how it works, start from LearnMQ.
To get your MQ server set up, check out Ready, Set, Connect.
You can use your own MQ server, you'll just have to adjust the MQ objects accordingly so they match on both the server and the client side.
- HOST - Host name or IP address of your queue manager
- PORT - Listener port for your queue manager
- CHANNEL - MQ channel name
- QMGR - Queue manager name
- APP_USER - User name that application uses to connect to MQ
- APP_PASSWORD - Password that the application uses to connect to MQ
- QUEUE_NAME - Queue name for
put/get,request/response - TOPIC_NAME - Topic for
publish/subscribe - MODEL_QUEUE_NAME - Model Queue used as template to base dynamic queues on for
request/response - DYNAMIC_QUEUE_PREFIX - Prefix for dynamically created reply queue - you don't need to create this
- CIPHER_SPEC - If present in the
env,json, TLS Cipher specification to use - KEY_REPOSITORY - Path to the
keystore.kbdand.sthfiles. If running on Apple Silicon then this will the path to the queue manager's exported.pem. If present in theenv.json, TLS is enabled - this is on the app side.
If instead you choose to provide a client channel definition table (CCDT) file,
then the Host, PORT, Channel and Cipher are provided by the
CCDT and you can leave them out of the env.json. All the samples check if the
environment variable MQCCDTURL is set and that the file it is pointing at exists.
If it does then the logic sets the connection definition or connection factory to
for CCDT processing. For example
export MQCCDTURL=file:///Users/xyz/Documents/dev/mqsamples/mq-dev-patterns/ccdt.json
We give you a sample ccdt.json from which you can base your own.
If you use our MQ server for developers in Docker, Linux or Windows, with the default config, you'll have the following MQ objects on the MQ server;
Host - localhost
Port - 1414 - Non TLS
Channel - DEV.APP.SVRCONN
Queue manager - QM1
App user - app (member of mqclient group)
App password - passw0rd (you can set your own when running the Docker container, MQ_APP_PASSWORD)
Queue - DEV.QUEUE.1
Topic - dev/
Cipher suite - TLS_RSA_WITH_AES_128_CBC_SHA256
The default configuration for MQ objects that you get with our Docker container does not include a model queue.
We use a model queue in the request/response pattern as a template for the request application to create a temporary reply queue.
You can use the MQ Web Console to create the model queue. Access the MQ Web Console for your MQ running as a container at https://localhost:9443/ibmmq/console/. You can log in with the default admin details or your own, if you made changes.
All the samples make use of the same environment variables to define MQ connection settings - these match the default developer config objects on the MQ server.
We've tried to make this easier by providing one env.json file in the main samples directory;
{
"MQ_ENDPOINTS": [{
"HOST":"localhost",
"PORT":"1414",
"CHANNEL":"DEV.APP.SVRCONN",
"QMGR":"QM1",
"APP_USER":"app",
"APP_PASSWORD":"passw0rd",
"QUEUE_NAME":"DEV.QUEUE.1",
"MODEL_QUEUE_NAME":"DEV.APP.MODEL.QUEUE",
"TOPIC_NAME":"dev/",
"CIPHER_SUITE":"TLS_RSA_WITH_AES_128_CBC_SHA256",
"KEY_REPOSITORY": "./keys/clientkey"
}]
}If you are running these samples on IBM Z Xplore then you can use the
env-zbindings.json file. Simply rename the env-zbindings.json to
env.json
You can use the env.json file to 'switch on' or 'switch off' parts of the code.
Having the endpoints defined as an array allows us to define multiple endpoints for the sample applications to use.
For example, removing the CIPHER_SUITE and KEY_REPOSITORY lines (don't forget to remove the comma from the last line in the json) will mean the sample will connect without using TLS.
If you have two docker containers, one with TLS and one without, changing the port number in the env.json allows you to switch between them.
The IBM MQ Client Toolkit on Apple Silicon (ARM64) makes use of OpenSSL libraries
for TLS. For the MQI based samples in this repository, this means that
KEY_REPOSITORY in the env.json file or environment
variable KEY_REPOSITORY be set to the path for the queue manager's exported .pem file. eg. If you have exported the qmgrcert.pem file to the root directory of this repository, then set KEY_REPOSITORY to ../qmgrcert.pem .
Let's say you're already running MQ in a Docker container without TLS having set it up by following the Ready, Set, Connect tutorial.
Now you want to run the second Docker container to try the samples with TLS switched on.
You can have the same MQ objects set up in both, and switch between them by using the host port forwarding to make the non TLS queue manager available on port 1414 and the TLS one on port 1415.
Do this in a directory you'll easily remember as you'll have to copy the server certificates over into a temporary folder each time you need to run MQ with TLS in a Docker container.
You'll also have to point to the client keystore location from the env.json file so that if you want to run samples with TLS, the sample knows where to look.
-
Create a new directory. Navigate inside this and generate a self-signed server key and certificate
openssl req -newkey rsa:2048 -nodes -keyout key.key -x509 -days 365 -out key.crtAn RSA private key will be generated and you'll need to complete information that will go inside the self signed certificate.
IMPORTANT: this directory should initially be empty.
-
Verify that the certificate has been created successfully
openssl x509 -text -noout -in key.crtWhen done, you'll see the certificate data output.
-
Create a client keystore.
-
For JMS and XMS based clients, create a .jks client keystore and create and verify a keystore password:
keytool -keystore clientkey.jks -storetype jks -importcert -file key.crt -alias server-certificate -
For MQI based Clients (Node, Python, Go)
Create a key database, a stash file. You will need to have installed the MQI client, so that you can run the runmqakm tool:
runmqakm -keydb -create -db clientkey.kdb -pw tru5tpassw0rd -type pkcs12 -expire 1000 -stashImport the server's public key certificate into the client key database
runmqakm -cert -add -label QM1.cert -db clientkey.kdb -pw tru5tpassw0rd -trust enable -file key.crt
- Move the client keystore
- Move the client keystore somewhere you will remember. Ensure the only files in the current directory are the
key.keyandkey.crtfiles, as IBM MQ will use the contents of this directory to configure security inside the container.
-
Run the new docker container
Give it a name, for example
mqtlsso you can differentiate it from your other MQ container when youdocker ps, and point it at the location where you copied the server certificate.docker run --name mqtls --env LICENSE=accept --env MQ_QMGR_NAME=QM1 --volume ___PATH TO SERVER_KEY/CERTIFICATE DIRECTORY___:/etc/mqm/pki/keys/mykey --publish 1415:1414 --publish 9444:9443 --detach --env MQ_APP_PASSWORD=passw0rd icr.io/ibm-messaging/mq:latestRemember to use a secure password for
MQ_APP_PASSWORD.
You should be able to open the MQ Web console for this TLS container on https://localhost:9444/ibmmq/console.
If you choose to stop the container, check the ID or name of the TLS container that was running previously with:
docker ps -a
then run
docker start <container id or name>
to start the container again.
The MQI samples; Node.js, Python, Go, require the MQI Client Toolkit to have been
installed and the paths
MQ_INSTALLATION_PATH and
DYLD_LIBRARY_PATH (MacOS) or LD_LIBRARY_PATH (Windows or Linux) set.
If you have installed the MQI client manually, ensure that
MQ_INSTALLATION_PATH is set to the root directory of your MQI Client installation and
DYLD_LIBRARY_PATH or LD_LIBRARY_PATH is set to $MQ_INSTALLATION_PATH\lib64.
Do not install any application requirements until
MQ_INSTALLATION_PATH and
DYLD_LIBRARY_PATH or LD_LIBRARY_PATH are set and exported (see language README docs for more info).