Wifi AP not starting up

[electric-m]

Hey there,

I cannot get the AP to show up.
The commands W+Return or A do not work at all.

I can however trigger the config button to enter Command mode and then trigger it twice. But still, the AP wont show up then.

Backtrace: 0x4013574A:0x3FFB1350 0x4008347D:0x3FFB1380 0x401C8C8B:0x3FFC0790 0x40136131:0x3FFC07B0 0x4008B1E7:0x3FFC07D0

  #0  0x4013574A:0x3FFB1350 in task_wdt_isr at /Users/michael/.platformio/packages/framework-espidf/components/esp_system/task_wdt.c:183 (discriminator 3)
  #1  0x4008347D:0x3FFB1380 in _xt_lowint1 at /Users/michael/.platformio/packages/framework-espidf/components/freertos/port/xtensa/xtensa_vectors.S:1114
  #2  0x401C8C8B:0x3FFC0790 in cpu_ll_waiti at /Users/michael/.platformio/packages/framework-espidf/components/hal/esp32/include/hal/cpu_ll.h:183
      (inlined by) esp_pm_impl_waiti at /Users/michael/.platformio/packages/framework-espidf/components/esp_pm/pm_impl.c:847
  #3  0x40136131:0x3FFC07B0 in esp_vApplicationIdleHook at /Users/michael/.platformio/packages/framework-espidf/components/esp_system/freertos_hooks.c:63
  #4  0x4008B1E7:0x3FFC07D0 in prvIdleTask at /Users/michael/.platformio/packages/framework-espidf/components/freertos/tasks.c:3987

E (433250) task_wdt: Print CPU 1 backtrace

[electric-m]

If i trigger the config button twice when in command mode, it wont blink 3 times in a row with a pause, but 5 times in a row with a pause.

[electric-m]

Solved, Needed to hold the button way longer

[electric-m]

On estep further. I can delete the Wifi Credentilas now, by clicking through the Command mode.
When they get reset, still no AP shows up, and when I am prompted to enter W+Return, nothing happens.

I (420929) wifi:wifi driver task: 3ffcca74, prio:23, stack:6656, core=0
I (420943) wifi:wifi firmware version: 1ba8b6a
I (420943) wifi:wifi certification version: v7.0
I (420944) wifi:config NVS flash: enabled
I (420945) wifi:config nano formating: disabled
I (420949) wifi:Init data frame dynamic rx buffer num: 32
I (420954) wifi:Init management frame dynamic rx buffer num: 32
I (420960) wifi:Init management short buffer num: 32
I (420964) wifi:Init dynamic tx buffer num: 32
I (420969) wifi:Init static rx buffer size: 1600
I (420973) wifi:Init static rx buffer num: 4
I (420977) wifi:Init dynamic rx buffer num: 32
I (420982) wifi_init: rx ba win: 6
I (420985) wifi_init: tcpip mbox: 32
I (420989) wifi_init: udp mbox: 6
I (420993) wifi_init: tcp mbox: 6
I (420997) wifi_init: tcp tx win: 5744
I (421002) wifi_init: tcp rx win: 5744
I (421006) wifi_init: tcp mss: 1440
I (421010) wifi_init: WiFi IRAM OP enabled
I (421015) wifi_init: WiFi RX IRAM OP enabled
I (421020) wifi_init: LWIP IRAM OP enabled
I (421028) phy_init: phy_version 4771,450c73b,Aug 16 2023,11:03:10
W (421032) phy_init: failed to load RF calibration data (0xffffffff), falling back to full calibration
I (421123) wifi:mode : sta (fc:b4:67:93:9a:30)
I (421124) wifi:enable tsf
I (421125) wifi:Set ps type: 1


*** WiFi Credentials ERASED!  Restarting...

I (422148) wifi:flush txq
I (422148) wifi:stop sw txq
I (422149) wifi:lmac stop hw txq
ets Jul 29 2019 12:21:46

rst:0xc (SW_CPU_RESET),boot:0x1b (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:5596
ho 0 tail 12 room 4
load:0x40078000,len:15852
load:0x40080400,len:3624
entry 0x4008064c
I (561) cpu_start: Multicore app
I (561) cpu_start: Pro cpu up.
I (561) cpu_start: Starting app cpu, entry point is 0x4008212c
I (549) cpu_start: App cpu up.
I (579) cpu_start: Pro cpu start user code
I (579) cpu_start: cpu freq: 240000000
I (579) cpu_start: Application information:
I (584) cpu_start: Project name:     HomeKey-ESP32
I (589) cpu_start: App version:      1
I (594) cpu_start: Compile time:     Mar  1 2024 19:14:54
I (600) cpu_start: ELF file SHA256:  69f5507649e3627e...
I (606) cpu_start: ESP-IDF:          4.4.6
I (610) cpu_start: Min chip rev:     v0.0
I (615) cpu_start: Max chip rev:     v3.99 
I (620) cpu_start: Chip rev:         v3.1
I (625) heap_init: Initializing. RAM available for dynamic allocation:
I (632) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (638) heap_init: At 3FFBD650 len 000229B0 (138 KiB): DRAM
I (644) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (650) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (657) heap_init: At 40098A4C len 000075B4 (29 KiB): IRAM
I (665) spi_flash: detected chip: generic
I (668) spi_flash: flash io: dio
I (678) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.
I (I (744) gpio: GPIO[3]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0 
I (744) gpio: GPIO[2]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (752) SETUP: setup > HOMEKEY ISSUERS: 0

************************************************************
Welcome to HomeSpan!
Apple HomeKit for the Espressif ESP-32 WROOM and Arduino IDE
************************************************************

** Please ensure serial monitor is set to transmit <newlines>

Message Logs:     Level 0
Status LED:       Pin 2  (Auto Off=15 sec)
Device Control:   Pin 3
Sketch Version:   n/a
HomeSpan Version: 1.8.0
Arduino-ESP Ver.: 2.0.14
ESP-IDF Version:  4.4.6
ESP32 Chip:       ESP32-D0WD-V3 Rev 3 dual-core 4MB Flash
ESP32 Board:      esp32
PWM Resources:    16 channels, 8 timers, max 20-bit duty resolution
Sodium Version:   1.0.12-idf  Lib 9.4
MbedTLS Version:  mbed TLS 2.28.4
Sketch Compiled:  Mar  1 2024 19:16:13
Partition:        app0I (2820) system_api: Base MAC address is not set
I (2820) system_api: read default base MAC address from EFUSE

MAC Address:      FC:B4:67:93:9A:30

Device Name:      Homekey Schloss

I (2834) gpio: GPIO[5]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2838) gpio: GPIO[18]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2847) gpio: GPIO[19]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
I (2856) gpio: GPIO[23]| InputEn: 1| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0 
E (2879) NFC_SETUP: Didn't find PN53x board
Configuring LockManagement
I (2880) LockMechanism: LockMechanism > Configuring LockMechanism
I (2885) NFCAccess: NFCAccess > Configuring NFCAccess

*** HomeSpan Info ***

➤ Accessory:  AID=1
   ➟ Service AccessoryInformation:  IID=1, UUID="3E"
      ⇨ Characteristic Identify(0):  IID=2, UUID="14", Perms=PW
      ⇨ Characteristic Manufacturer("Kodeative"):  IID=3, UUID="20", Perms=PR
      ⇨ Characteristic Model("HomeKey-ESP32"):  IID=4, UUID="21", Perms=PR
      ⇨ Characteristic Name("Homekey Schloss"):  IID=5, UUID="23", Perms=PR
      ⇨ Characteristic SerialNumber("HK-360"):  IID=6, UUID="30", Perms=PR
      ⇨ Characteristic FirmwareRevision("0.1"):  IID=7, UUID="52", Perms=PR+EV
      ⇨ Characteristic HardwareFinish("AQQAAAAA"):  IID=8, UUID="26C", Perms=PR
   ➟ Service LockManagement:  IID=9, UUID="44"
      ⇨ Characteristic LockControlPoint(""):  IID=10, UUID="19", Perms=PW
      ⇨ Characteristic Version("01.01.00"):  IID=11, UUID="37", Perms=PR
   ➟ Service LockMechanism:  IID=12, UUID="45"
      ⇨ Characteristic LockCurrentState(1):  IID=13, UUID="1D", Perms=PR+EV, Range=[0,3] (nvs)
      ⇨ Characteristic LockTargetState(1):  IID=14, UUID="1E", Perms=PR+PW+EV, Range=[0,1] (nvs)
   ➟ Service NFCAccess:  IID=15, UUID="266"
      ⇨ Characteristic ConfigurationState(0):  IID=16, UUID="263", Perms=PR+EV, Range=[0,1]
      ⇨ Characteristic NFCAccessControlPoint(""):  IID=17, UUID="264", Perms=PR+PW+WR
      ⇨ Characteristic NFCAccessSupportedConfiguration("AQEQAgEQ"):  IID=18, UUID="265", Perms=PR
   ➟ Service HAPProtocolInformation:  IID=19, UUID="A2"
      ⇨ Characteristic Version("01.01.00"):  IID=20, UUID="37", Perms=PR

Configured as Bridge: NO

Database Validation:  Warnings=0, Errors=0

Service                             UUID         AID  IID  Update  Loop  Button  Linked Services
------------------------------  --------  ----------  ---  ------  ----  ------  ---------------
AccessoryInformation                  3E           1    1      NO    NO      NO  -
LockManagement                        44           1    9      NO    NO      NO  -
LockMechanism                         45           1   12     YES   YES      NO  -
NFCAccess                            266           1   15     YES    NO      NO  -
HAPProtocolInformation                A2           1   19      NO    NO      NO  -

*** End Info ***


Generating SRP verification data for new Setup Code: 123-45-678 ... New Code Saved!
Setup Payload for Optional QR Code: X-HM://006364JKZ    

Accessory ID:      B3:40:09:EF:E0:69                               LTPK: FBFF286D0DF39D336EDC9CEE31ECDD83E4362CD2853B77A1DD80357935349D55
No Paired Controllers

Accessory configuration number: 1

*** WIFI CREDENTIALS DATA NOT FOUND.  YOU MAY CONFIGURE BY TYPING 'W <RETURN>'.

Homekey Schloss is READY!