Provides both a simple shell interface, some useful CLI commands and a bootloader for the BPH. Simplifies dealing with pinouts with a json config file. Simplifies installation with a pip package.
To install bph_pal use the python3 pip package.
pip3 install bph_pal
To use the CLI calls check the help.
python3 -m bph_pal -h
For using the interactive shell, for example when testing.
bph_shell
For bootloading PHiLIP the port should be specified on the Raspberry Pi if another board is plugged in.
bootload_philip -p /dev/ttyAMA0 -e -w -v -pv <PHiLIP_VERSION>
The -h can also be used to see optional parameters.