diff --git a/readme.md b/readme.md
index 5881babb..1811bcbc 100755
--- a/readme.md
+++ b/readme.md
@@ -77,87 +77,3 @@ The bitaxetool requires a config.cvs preloaded file and the appropiate firmware.
 ```
 bitaxetool --config ./config.cvs --firmware ./esp-miner-factory-v2.0.3.bin
 ```
-
-
-
-
-# ESP-Miner Build Instructions
-
-## Prerequisites
-
-Ensure that you have Python 3.4 or later installed along with pip. If pip is not installed, you can follow the instructions (https://pip.pypa.io/en/stable/installation/).
-
-## Install BitAxeTool
-
-Install the `bitaxetool` from pip:
-
-```bash
-pip install --upgrade bitaxetool
-```
-
-## Hardware Requirements
-
-This firmware is designed to run on a BitAxe v2+. If your BitAxe doesn't have USB connectivity, establish a serial connection using either a JTAG ESP-Prog device or a USB-to-UART bridge.
-
-## Preconfiguration
-
-Starting from v2.0.0, the ESP-Miner firmware requires basic manufacturing data flashed in the NVS partition. Follow these steps:
-
-1. Download the `esp-miner-factory-v2.0.3.bin` file from the [release tab](https://github.com/skot/ESP-Miner/releases).
-
-2. Copy `config.cvs.example` to `config.cvs` and modify the following parameters in the file:
-
-   - `asicfrequency`
-   - `asicvoltage`
-   - `asicmodel`
-   - `devicemodel`
-   - `boardversion`
-
-Ensure that your `config.cvs` file has all the necessary values for proper flashing. Here are the recommended values for different BitAxe models:
-
-- For BitAxe 1368 (supra):
-
-  ```csv
-  key,type,encoding,value
-  main,namespace,,
-  asicfrequency,data,u16,490
-  asicvoltage,data,u16,1200
-  asicmodel,data,string,BM1368
-  devicemodel,data,string,supra
-  boardversion,data,string,400
-  ```
-
-- For BitAxe 1366 (ultra):
-
-  ```csv
-  key,type,encoding,value
-  main,namespace,,
-  asicfrequency,data,u16,485
-  asicvoltage,data,u16,1200
-  asicmodel,data,string,BM1366
-  devicemodel,data,string,ultra
-  boardversion,data,string,0.11
-  ```
-
-- For BitAxe 1397 (MAX):
-
-  ```csv
-  key,type,encoding,value
-  main,namespace,,
-  asicfrequency,data,u16,475
-  asicvoltage,data,u16,1400
-  asicmodel,data,string,BM1397
-  devicemodel,data,string,max
-  boardversion,data,string,2.2
-  ```
-
-## Flashing
-
-The `bitaxetool` includes all necessary libraries for flashing the binary file to the BitAxe Hardware. Ensure that the `config.cvs` preloaded file and the appropriate `firmware.bin` file are in the execution directory.
-
-Flash with the `bitaxetool`:
-
-```bash
-bitaxetool --config ./config.cvs --firmware ./esp-miner-factory-v2.0.3.bin
-```
-