diff --git a/proposals/0148-stake-program-move-instructions.md b/proposals/0148-stake-program-move-instructions.md
new file mode 100644
index 00000000..73b07a6b
--- /dev/null
+++ b/proposals/0148-stake-program-move-instructions.md
@@ -0,0 +1,193 @@
+---
+simd: '0148'
+title: MoveStake and MoveLamports Instructions
+authors:
+  - Hanako Mumei
+category: Standard
+type: Core
+status: Draft
+created: 2024-04-30
+feature: (fill in with feature tracking issues once accepted)
+---
+
+## Summary
+
+We propose introducing two new instructions to the stake program for moving
+value between stake accounts with identical `Authorized` and `Lockup`:
+
+* `MoveStake`: Move a given `amount` of active stake from one active account to
+another active account, or from an active account to an inactive one, turning it
+into an active account. If the entire source account delegation is moved, the
+source account becomes inactive. In all cases, rent-exempt balance is unaffected
+and minimum delegations are respected for accounts that end in an active state.
+* `MoveLamports`: Move a given `amount` of excess lamports from one active or
+inactive account to another active or inactive account, where "excess lamports"
+refers to lamports that are neither delegated stake nor required for
+rent-exemption.
+
+For simplicity of implementation, we choose not to support accounts that are
+activating, deactivating, or partially active. A future SIMD may choose to
+extend this functionality should it be desirable.
+
+## Motivation
+
+Recently, a feature was activated which mandates that `Split` destinations be
+prefunded with the rent-exempt reserve, because before that, `Split` could be
+used to deactivate stake immediately, bypassing the cooldown period.
+
+However, this has introduced issues for protocols that manage stake on behalf
+of users without taking `Withdrawer` authority. Particularly, for one that
+splits user stake across many validators and periodically redelegates between
+them, every time they want to split part of a user stake to deactivate, the
+protocol must fund the rent-exemption themselves. And then when that split
+account is merged, those lamports cannot be reclaimed by the protocol, instead
+accumulating (undelegated) in the destination merge accounts.
+
+The purpose of the `MoveStake` instruction is to enable a flow whereby moving
+stake from a user's stake accounts U1 -> U2 from validator V1 to validator V2
+may proceed:
+
+* `MoveStake` the `amount` of stake from the user stake account U1 to an
+inactive account T holding sufficient lamports for rent exemption. T instantly
+becomes a second active stake account delegated to V1 with `amount` stake.
+* `Deactivate` T and wait an epoch.
+* `DelegateStake` T to V2 and wait an epoch. T becomes an active stake account
+delegated to V2 with `amount` stake.
+* `MoveStake` the `amount` stake from T to U2. T returns to its initial inactive
+state. Stake has moved from U1 to U2 with no outside lamports required and no
+new undelegated lamports becoming trapped in delegated stake accounts.
+
+The motivation for `MoveLamports` is to enable housekeeping tasks such as
+reclaiming lamports from `Merge` destinations.
+
+## Alternatives Considered
+
+* There is a longstanding proposal we call Multistake, which would allow a
+stake account to have two delegation amounts to the same validator, the idea
+being that one serves as an onramp (and possibly offramp) for active stake on
+the account. This could support other flows to accomplish the same objective,
+such as allowing `DelegateStake` to accept an active stake account to begin
+activating an account's excess (non-rent non-stake) lamports, or allowing a
+`Split` source to `Deactivate` enough stake to cover rent-exemption for the new
+account. However, Multistake is a much larger design/engineering project, and
+we have to solve the existing proble sooner than Multistake would be ready.
+* We discussed various proposals for allowing `Merge` to leave behind the
+source account or `Split` to split into any mergeable destination. However this
+confuses the presently clear distinction between these two operations and
+entails additional implementation risk as they are already rather complex. A
+new instruction that does one specific thing seems highly preferable.
+* The original version of this SIMD proposed a `Move` that did not take an
+`amount`, but this would require changes to `Split` to enable the first leg of
+the proposed flow.
+* Back out the changes introduced by requiring rent-exempt `Split` destinations.
+This is undesirable because that restriction was added for very good reason: an
+effectively unbounded amount of stake could be instantly deactivated through
+repeated splitting.
+
+## New Terminology
+
+`MoveStake` and `MoveLamports`, two new stake program instructions.
+
+## Detailed Design
+
+For clarity of terminology inside this specification:
+
+* An "active" stake is in a `Stake` state with nonzero delegation, 100% of which
+is effective stake. There is no activating or deactivating stake.
+* An "inactive" stake is in an `Initialized` or `Stake` state. There is no
+effective, activating, or deactivating stake.
+
+### `MoveStake`
+
+`MoveStake` requires 3 accounts:
+
+0. Source stake account: Writable, owned by the stake program
+1. Destination stake account: Writable, owned by the stake program
+2. Stake account authority: Read-only signer
+
+`MoveStake` instruction data is 12 bytes, containing:
+
+* `0x10 0x00 0x00 0x00`, a fixed-value four-byte little-endian unsigned integer
+acting as the instruction discriminator
+* `amount`, an unaligned eight-byte little-endian unsigned integer indicating
+the quantity of lamports to move
+
+`MoveStake` aborts the transaction when:
+
+* `amount` is 0
+* Source or destination are not writable
+* Source or destination are not owned by the stake program
+* Source and destination have the same address
+* Source and destination do not have identical `Authorized`
+* If `Lockup` is in force, source and destination do not have identical `Lockup`
+* The stake account authority is not the `Staker` on both accounts
+* The stake account authority is not a signer
+* Source data length is not equal to the current version of `StakeState`
+* Destination data length is not equal to the current version of `StakeState`
+* Source is not active
+* Destination is neither active nor inactive
+* If destination is active, source and destination are not delegated to the same
+vote account
+* Moving `amount` stake would leave source with a nonzero amount of stake less
+than the minimum delegation
+* Moving `amount` stake would fail to bring destination up to minimum delegation
+
+If all of these conditions hold, then:
+
+* Delegation and lamports on source are debited `amount`
+* Delegation and lamports on destination are credited `amount`
+* If `amount` constitutes the full delegation on the source, source is reset to
+an `Initialized` state
+* If destination is inactive, destination becomes active with the same `Stake`
+as source, aside from delegation amount
+* `credits_observed` must be updated on the destination according to the same
+rules as `Merge`
+
+### `MoveLamports`
+
+`MoveLamports` requires 3 accounts:
+
+0. Source stake account: Writable, owned by the stake program
+1. Destination stake account: Writable, owned by the stake program
+2. Stake account authority: Read-only signer
+
+`MoveLamports` instruction data is 12 bytes, containing:
+
+* `0x11 0x00 0x00 0x00`, a fixed-value four-byte little-endian unsigned integer
+acting as the instruction discriminator
+* `amount`, an unaligned eight-byte little-endian unsigned integer indicating
+the quantity of lamports to move
+
+`MoveLamports` aborts the transaction when:
+
+* `amount` is 0
+* Source or destination are not writable
+* Source or destination are not owned by the stake program
+* Source and destination have the same address
+* Source and destination do not have identical `Authorized`
+* If `Lockup` is in force, source and destination do not have identical `Lockup`
+* The stake account authority is not the `Staker` on both accounts
+* The stake account authority is not a signer
+* Source is neither active nor inactive
+* Destination is not a valid merge destination (active, inactive, or activating
+with zero effective stake)
+* `amount` exceeds source `lamports - effective_stake - rent_exempt_reserve`
+
+If all of these conditions hold, then:
+
+* Lamports on source are debited `amount`
+* Lamports on destination are credited `amount`
+
+## Impact
+
+The primary utility of the proposed instructions is to support protocol
+developers in moving value between stake accounts with the same authorities
+without controlling the `Withdrawer`. There is no loss of existing
+functionality.
+
+## Security Considerations
+
+Care must be taken to ensure stakes are active, as moving delegations
+between accounts in any kind of intermediate state is fraught. Otherwise this
+change should be fairly low impact, as it does not require changing any existing
+logic, in particular avoiding making `Split` or `Merge` more permissive.