config.ini.example

[general]
; GENERAL SETTINGS

; The bot automatically evens out the exchange wallets. This sets the minimum
; required BTC amount for a transfer. The bot may decide to adjust the minimum
; to a higher value if the transfer fees are really high.
min-btc-xfer = 0.025

; The bot has a safety factor for being more conservative by default about
; transfering BTC versus other assets.  The bot tries to not lose more than
; 1% of an altcoin during transfer, but we are more conservative by a factor
; of btc-xfer-safety-factor.  For example if you adjust this value to 2,
; the bot tries to not lose more than 0.5% of our BTC during transfer, and
; help accumulate profits faster.
btc-xfer-safety-factor = 1.5

; It could happen that the bot leaves orders at the exchange (if an order was
; only partially filled). Enable this setting to cancel those orders in regular
; intervals to free up the coins bound to these orders.
cancel-stray-orders = true

; Some coins are blocked and aren't traded
; because they cannot be automatically withdrawn by the bot.
; NOTE That if you use HitBTC and see 'Deposits not allowed on this coin'
; please add it here, or else it'll trade then not be able to deposit... HitBTC doesn't allow us to grab which aren't depositable until we go to generate a deposit address then it responds with an subpar error
blockedCoins = BTS,BCN,NEO,BURST,SWIFT,STEEM,ARDR,SBD,NAUT

; Enable the admin UI (enables making modifications to the config of the bot)
; NOTE: It is not recommended to enable this unless if the bot's UI is served using
; a password protected HTTPS server.
admin-ui = false

[db]
; DATABASE SETTINGS

; Your MySQL database user
user = arbitrage

; Your MySQL database password
pass = YOUR_PASSWORD

; Your MySQL database host
host = localhost

; Your MySQL database name
name = arbitrage

[modules]
; MODULE ENABLING / DISABLING

; The coin autobuy module will automatically buy the most profitable altcoins, if you assign it 'autobuy_funds' in the database
coin-autobuy = true

; The autobalance module will automatically balance the wallets across exchanges depending on the current needs and pending deposits.
auto-balance = true

; The coin liquidation module will automatically sell coins that aren't profitable any more
coin-liquidation = false

; The take profit module will transfer trading profits to an external wallet
take-profit = false

; The trade module will do the arbitrage-trading stuff. Just in case you want to disable it for some reason...
trade = true

; Alert about stuck transfers between exchanges that haven't finished in the last 24 hours.
stuck-detection = true

; Alert about duplicate withdrawals detected on an exchange in the last 24 hours.
duplicate-detection = true

; Detect coins that have balances at the exchange but the bot won't automatically liquidate
unused-coins-detection = true

[autobuy]
; AUTOBUY MODULE CONFIGURATION
; Settings for the autobuy module

; To allow the buying of a broader range of altcoins, this setting allows you to
; set limit how many altcoins are bought at once (in BTC). If you have a larger
; amount of BTC you want to spend for increasing your altcoin portfolio, you may
; want to increase this value.
max-buy = 0.005

[takeprofit]
; TAKE PROFIT MODULE CONFIGURATION
; Settings for the take profit module

; The profit-limit is the limit at which BTC balances are considered 'profit'.
; If you initially fund your exchange accounts with 1.0 BTC, you should set this
; value to 1.0 BTC.
profit-limit = 1.0

; All funds above 'profit-limit' are sent to this address
profit-address = 1XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

; Minimum BTC amount of cash being restocked into autobuy funds when withdrawing profits.
min-restock-cash = 0.1

; Percentage of the withdrawn profits that are being restocked into autobuy funds when
; withdrawing profits.
restock-cash-percentage = 0.33

[trade]
; TRADE MODULE CONFIGURATION
; Settings for the trade module

; The maximum trade size (in BTC). Every trade is a risk and this setting allows
; to limit your risk.
; This setting is also used by the bot to determine the optimal altcoin amount.
; By setting this too high you will effectively disable the 'liquidation'-module.
; It is recommended to never set this value above 0.05
max-trade-size = 0.01

; The minimum profit that is is required to enter a trade. As the profit is
; calculated in a simulation, it is not guaranteed that every trade will this
; much profit.
min-profit = 0.00000050

; There is a time-gap between downloading the orderbook and placing the order.
; In the meanwhile the orderbook entry could have disappeared (cancelled, filled, ...)
; to 'force' the order to match against the next orderbook entry, these factors
; are applied before posting the order.
; This increases the chance to get the order filled, but could result in a loss.
; Note that if you set the buy factor too high and/or the sell factor too low,
; the bot may never end up entering a trade, with messages like "NOT ENTERING TRADE:
; REDUCED SELL RATE xxx IS BELOW INCREASED BUY RATE yyy", in which case you need
; to adjust these accordingly.  These numbers are factors that are multiplied into
; the buy/sell prices that the bot places orders at, so the log messages should
; give you an idea of how the prices the bot is working with change as you adjust
; these variables.
;
; Set both values to 1 to disable
buy-factor = 1.005
sell-factor = 0.995

[mail]
; MAIL CONFIGURATION
; Configure your email settings here:

; The address to which you want your notification mails.
address =


; EXCHANGE CONFIGURATION
; Configure your exchange settings here
[bitfinex]

key = 

secret = 

[kraken]

key = 

secret = ; put secret in " " quotes 

; note that livecoin fee discovery == 0 for withdraw and 0 for deposit, the below max. withdrawal fee defaults to allowing all.

[livecoin]

key = 

secret = 

;[HitBTC] disabled by default

;Remember to enable all permissions!

; API key for hitbtc
;key = 

; API secret for hitbtc
;secret =


[bittrex]

;Remember to enable READ INFO, TRADE LIMIT, TRADE MARKET and WITHDRAW permissions for Bittrex!

; API key for Bittrex
key =

; API secret for Bittrex
secret =

[bleutrade]

; Bleutrade API keys can be generated on https://bleutrade.com/member/api_keys.

; API key for Bleutrade
key =

; API secret for Bleutrade
secret =

[poloniex]

; Remember to enable withdrawals for POLONIEX!

; API key for Poloniex
key =

; API secret for Poloniex
secret =

; PLEASE CHANGE THESE ONLY IF YOU ARE SURE WHAT YOU ARE DOING :)

[expert]

; Delay between queries [s]
query-delay = 5

; Max age of database records to include them in profitability calculations
opportunity-count-age = 240

; Max transfer fee (in BTC) that is desirable for coins that we want to hold in our trading portfolio.
max-tx-fee-allowed = 0.00001

; Max number of confirmation allowed for tradeable assets.  Increasing this number allows holding
; assets that have longer transfer times, which means once a trade happens and we issue a
; transfer, we won't be in the ownership of our coins in a long time and therefore will miss out
; on any arbitrage opportunities in the interim.
max-min-confirmations-allowed = 50

; Protect against underselling during transactions.  This works by first issuing the sell trades
; and then quickly attempting to check the result of the sell trade to see whether the entire order
; was fullfilled and if not adjust down the buy order amount accordingly before placing it.  The
; downside of this is that it introduces an extra lag between the placement of the sell and buy
; orders, which might cause the desired orders to disappear from the buy orderbook by the time that
; the bot manages to place the buy order, but the bot manages to place a more accurate buy order
; as a result.
undersell-protection = false

; How many pairs to check per exchange pair
max-pairs-per-run = 15

; Max log age [h]
max-log-age = 60

; Delay before checking trade results
order-check-delay = 60

; Smoothing altcoin exchange rates to calculate desired coin balances
rate-ema-period = 5

; Intervals for internal management tasks [h]
interval-management = 1
interval-take-profit = 12
interval-stuck-detection = 12
interval-duplicate-detection = 12
interval-unused-coin-detection = 4
interval-db-cleanup = 24

; Allow the UI over HTTP when the bot is exposed to insecure Internet connected machines
allow-insecure-ui = false

; Allow the UI without authentication when the bot is exposed to the insecure Internet
allow-unauthenticated-ui = false