Ender 3 v2 Linear Rail Modifications

[RichardTHF]

Hi there,

You said to let you know if anyone came across an issue with this, so I thought I would let you know.

I have modified my Ender 3 V2 with the Linear Rail upgrade and the "upgraded" mounting plate is actually 5mm so thicker than stock 2mm plate.

Not an issue, I just modified the STL to make it fit!

Thank you so much for making this, saved me a lot of time having to make one from scratch :)

[strayr]

You should probably look at the ender 3 switchwire conversion, that's the intended next step here. https://github.com/SW-Conversion/mod-regisistry I recommend looking at DaRK_dOg's version 2.

…

On Sat, 7 Jan 2023, 15:28 Richard Davies, ***@***.***> wrote: Hi there, You said to let you know if anyone came across an issue with this, so I thought I would let you know. I have modified my Ender 3 V2 with the Linear Rail upgrade and the "upgraded" mounting plate is actually 5mm so thicker than stock 2mm plate. Not an issue, I just modified the STL to make it fit! Thank you so much for making this, saved me a lot of time having to make one from scratch :) — Reply to this email directly, view it on GitHub <#4>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AKIYU2HZIK2463S7KWH7T53WRGDRVANCNFSM6AAAAAATUAFIBA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>