Skip to content

Latest commit

 

History

History
220 lines (151 loc) · 10.5 KB

README.md

File metadata and controls

220 lines (151 loc) · 10.5 KB
Raw

The SWITCH scalable Jitsi Installation

22.3.2020

SWITCH is the Swiss National Research and Education Network (NREN) and provides various IT services to Swiss higher education institutions. This ansible playbook is used to set up a cluster of individual Jitsi Frontend servers (one for each insitiution) that share a pool of videobridges. This is a brand new service that was started during the Covid19 crisis in March 2020. A service description can be found at https://switch.ch/meet

This repository is provided AS IS under a MIT license without any implicit or explicit guarantees that it will work for you.

The setup is geared towards our needs and will most likely not work out of the box for you.

Things to look out for:

  • We provision VMs on our internal IaaS cloud SWITChengines (https://switch.ch/engines) using the build*servers playbooks. You will need to adapt that to your environment
  • We use an internal ansible role (users) that provisions our admin users onto our VMs. You will need to roll your own. For now, remove the users role entry in provision.yml
  • We use Ubuntu 18.04 as a base operating system. No other configurations have been or will be tested
  • We use Shibboleth Authentication. If you are not part of the universities, chances are you will not need to know how that works. Remove the shib role entry in provision.yml
  • We use https://site24x7.com for monitoring. The playbook sets up automatic server monitoring. Again, remove the site24x7 role from provision.yml

Create your own directories for group_vars, hosts_vars and inventory Or use the ansible-galaxy approach, then use

$ cd ansible
$ ansible-galaxy install -fr roles/requirements.yml

Adding a new service VM (this is very SWITCH specific)

The follwowing steps guides you through a building process of a new Jitsi Meet instance.

  • Initially, change jitsi-ORGANISATION in build_jitsi_server.yml.

  • Source the corresponding project, use openrc.sample as a guidance.

    $ ansible-playbook build_jitsi_server.yml -D

Important: Variables such as inventory, host_vars and group_vars go into jitsi-deploy-vars repo! (ansible-galaxy)

  • This will display the IPv4 and IPv6 of the instance. Add the host into inventory/production

  • Copy host_vars/template.meet.example.com folder, to ORGANISATION.meet.switch.ch and change the values such as:

    • SSL certificate (vars.yml and vault.yml)

    • callstat.io credentials

      Note: The callstats credentials can be requested on our organisation page at callstats.io.

    • Think about shibboleth. Shall it be enabled?! If yes, set jitsi_shib: yes in vars.yml.

  • Ask for DNS entry ORGANISATION.meet.switch.ch with IPv4 & IPv6 info

  • Special Parameters:

  • When all values are filled out (except of the shib-cert and shib-key), you can run:

    $ ansible-playbook -i inventory/production main.yml -e ansible_user=ubuntu --limit new_host.meet.example.com
    • Remove -e ansible_user=ubuntu when you reinstall the host! Users will be installed during initial run.

  • You can limit the playbook runs to specific tasks with the following tags

    • conf - only deploy configuration changes (and restart services where necessary)

    • webconf - only deploy the web config of jitsi-meet (no service disruption)

    • nginx - only install/configure Nginx

    • jitsi - only install/configure Jitsi

    • shib - only install/configure Shibboleth

    • Example:

      $ ansible-playbook -i inventory/production main.yml --limit new.host.meet.ch --tags conf

  • If shiboleth is enabled --> request an RR:

    • login to the server and get the fingerprint of the AAI Shib certificate and /etc/shibboleth/sp-cert.pem

      $ openssl x509 -in /etc/shibboleth/sp-cert.pem -fingerprint -sha1 -noout

    • copy the sp-cert.pem and sp-key.pem to your local machine in host_vars/ORGANISATION.meet.switch.ch/vars.yml | vault.yml

    • create the RR request at https://rr.aai.switch.ch

      • Name: hostname
      • Entity ID: hostname
      • Home Org: SWITCH
      • Description: "VideoConf service for UNI provided by SWITCH"
      • For support contacts:
      • Attributes:
        • Required: mail, firstname, givename, uniqueid
      • Audience:
        • Limit to the requesting organisation
        • exclude the EduID
      • Paste the Fingerprint into the comment field at the end

    • wait for the approval.

  • Done. You should have a new host for the specific organisation.

  • Note: Videobridges have to be configured with the new hosts. VBs have to authenticate to the MUC on the new server. Until then, no meetings are possible.) This can be done with:

    $ ansible-playbook -i inventory/production main.yml --limit videobridge -D

  • Note: Configuration will only apply when VBs are restarted. Mind the active meetings on the VB instances!!!

Add a new videobridge server

switch-net

The new Transform's switch-net gives us unNATed, unfiltered IP addresses (IPv4 and IPv6) in the SWITCH network ranges.

The switch-net were add to the videobridges.meet.switch.ch project in ZH and LS as decribed in Self-Service Port Allocation

Create and provision videobridge server

  • Source credentials of the videobridges.meet.switch.ch project!

  • Add new entry in inventory/production in the section videobridge. (LS or ZH)

  • Run the following command to build:

    • Important: Comment out existing VBs in order to speed up the build process! From both videobridge_zh and videobridge_ls!

      $ ansible-playbook -i inventory/production build_videobridge_servers.yml -D

  • Write the IPs with ansible_host to the host inventory/production

  • Assure that you filled in the callstats.io credentials in group_vars/videobrdiges/vars.yml (Should already be present!)

  • Execute the following playbook:

    $ ansible-playbook -i inventory/production main.yml -e ansible_user=ubuntu --limit jitsi-videobridge-XXXX.videobridges.meet.switch.ch

Create and provision coturn server

  • Source credentials of the videobridges.meet.switch.ch project!

  • Add new entry in inventory/production in the section coturn. (LS or ZH)

  • Run the following command to build:

    • Important: Comment out existing coturns in order to speed up the build process! From both coturn_zh and coturn_ls!

      $ ansible-playbook -i inventory/production build_coturn_servers.yml -D

  • Write the IPs with ansible_host to the host inventory/production

  • Execute the following playbook:

    $ ansible-playbook -i inventory/production main.yml -e ansible_user=ubuntu --limit jitsi-coturn-XXXX.meet.switch.ch

Testing STUN/TURN

NB: Be sure to test this while NOT on the VPN.

To test if STUN/TURN is working, open a conference in three tabs of the browser and disable outgoing UDP packets to port 10000. On Mac OSX:

# set rule to block outgoing traffic udp 10000
$ (sudo pfctl -sr 2>/dev/null; echo "block drop out quick on en0 proto udp from any to any port = 10000 no state") | sudo pfctl -f -
# enable the PacketFilter (pf) firewall
# sudo pfctl -e

If STUN/TURN works, the images of the two "remote" participants (i.e. the other browser tabs) should continue to show video. In addition the note (stun) is added in the Show More information of the network data.

If it doesn't work, the remote participants will show no video (and have no audio obviously).

To display information about pf

# verbose listing of rules
$ sudo pfctl -v -s rules

To reset the firewall

# Disable pf
$ sudo pfctl -d
# Reload the default rules
$ sudo pfctl -f /etc/pf.conf

Add jibri service

  • There is a build script which deploys new jibri servers. (build_jibri_server.yml)

  • Add a new server to inventory/production

    • Important: Please comment out the existing servers! From both jibri_zh and jibri_ls!

  • Source the project's .openrc file and run:

    $ ansible-playbook -i inventory/production build_jibri_server.yml -D

  • Note: Script loops over the jibri group and creates new hosts in the given project.

  • Add the respective IPs into inventory/production

Purge Services

While installing and trying to get things working, you might want to purge all traces of nginx or jitsi from your servers. Use the purge.yml playbook like so:

$ ansible-playbook -i inventory/production purge.yml --limit ORGANISATION.meet.example.com

Specify one (or more of the following tags) with --tags ...

  • nginx - remove nginx from server
  • jitsi - remove all traces of jitsi / prosody etc from the server
  • jicofolog - truncate the jicofo logs

Reinstallation of a service

It might happen that things get broken, so you can redeploy the Jitsi Meet instance easily.

  • Run:

    //Purge instance
$ ansible-playbook -i inventory/production purge.yml --limit ORGANISATION.meet.example.com

// Reinstall services
$ ansible-playbook -i inventory/production main.yml --limit ORGANISATION.meet.example.com -D

Attribution

The Jitsi Ansible role is heavily influenced by https://github.com/freedomofpress/ansible-role-jitsi-meet

License

MIT Licence

Copyright 2020 SWITCH, https://switch.ch

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.