g2dialect Consensus Mcodes

See also Consensus Gcode

##Consensus Mcode Usage This table lists rough consensus usage from the above sources.

Gcode | Command | Usage / Notes
--------|-------------|-----------------------------
M0 | Program Stop | Stop motion
M1 | Optional Program Stop |
M2 | Program End |
M3 | Spindle On, Clockwise |
M4 | Spindle On, Counterclockwise | 
M5 | Spindle Stop |
M6 | Tool Change | 
M7 | Mist Coolant On | 
M8 | Flood Coolant On | 
M9 | Mist And Flood Coolant Off | 
M30 | Program End | 
M48 | Enable Feed & Spindle Overrides | cnc
M49 | Disable Feed & Spindle Overrides | cnc
M50 | Feed Override Control | cnc
M51 | Spindle Override Control | cnc
M60 | Stop | cnc
M62 | Digital Output - Turn on sync w/motion | cnc
M63 | Digital Output - Turn off sync w/motion | cnc
M64 | Digital Output - Turn on immediately | cnc
M65 | Digital Output - Turn off immediately | cnc
M66 | Wait on Input | cnc
M67 | Analog Output Control | cnc
M68 | Analog Output Control | cnc