Error building OpenDTU in vscode

[joachim-beck]

Hello,
i try to build OpenDTU with vscode and followed the instructions given this project.
If I try to build OpenDTU i get the message below.
I am very thankful for any advice.
Thank you for your support.
Joachim

Processing generic (board: esp32dev; framework: arduino; platform: espressif32@>=5.2.0)
--------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via -v, --verbose option
"C:\Users\jjbec.platformio\penv\Scripts\python.exe" -m pip install dulwich --global-option="--pure"
WARNING: Implying --no-binary=:all: due to the presence of --build-option / --global-option / --install-option. Consider using --config-settings for more flexibility.
DEPRECATION: --no-binary currently disables reading from the cache of locally built wheels. In the future --no-binary will not influence the wheel cache. pip 23.1 will enforce this behaviour change. A possible replacement is to use the --no-cache-dir option. You can use the flag --use-feature=no-binary-enable-wheel-cache to test the upcoming behaviour. Discussion can be found at pypa/pip#11453
Collecting dulwich
Using cached dulwich-0.20.50.tar.gz (430 kB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Requirement already satisfied: urllib3>=1.25 in c:\users\jjbec.platformio\penv\lib\site-packages (from dulwich) (1.26.12)
Installing collected packages: dulwich
DEPRECATION: dulwich is being installed using the legacy 'setup.py install' method, because the '--no-binary' option was enabled for it and this currently disables local wheel building for projects that don't have a 'pyproject.toml' file. pip 23.1 will enforce this behaviour change. A possible replacement is to enable the '--use-pep517' option. Discussion can be found at pypa/pip#11451
Running setup.py install for dulwich: started
Running setup.py install for dulwich: finished with status 'error'
error: subprocess-exited-with-error

× Running setup.py install for dulwich did not run successfully.
│ exit code: 1
╰─> [6 lines of output]
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
or: setup.py --help [cmd1 cmd2 ...]
or: setup.py --help-commands
or: setup.py cmd --help

  error: option --pure not recognized
  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure

× Encountered error while trying to install package.
╰─> dulwich

note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
*** Error 1
ModuleNotFoundError: No module named 'dulwich':
File "C:\Users\jjbec.platformio\penv\lib\site-packages\platformio\builder\main.py", line 186:
env.SConscript(item, exports="env")
File "C:\Users\jjbec.platformio\packages\tool-scons\scons-local-4.4.0\SCons\Script\SConscript.py", line 597:
return _SConscript(self.fs, *files, **subst_kw)
File "C:\Users\jjbec.platformio\packages\tool-scons\scons-local-4.4.0\SCons\Script\SConscript.py", line 285:
exec(compile(scriptdata, scriptname, 'exec'), call_stack[-1].globals)
File "C:\Users\jjbec\OneDrive\Dokumente\Solar\OpenDTU\auto_firmware_version.py", line 16:
from dulwich import porcelain
============================================================== [FAILED] Took 2.93 seconds ==============================================================
Environment Status Duration

---

generic FAILED 00:00:02.930
======================================================== 1 failed, 0 succeeded in 00:00:02.930 ========================================================

• Der Terminalprozess "C:\Users\jjbec.platformio\penv\Scripts\platformio.exe 'run'" wurde mit folgendem Exitcode beendet: 1.
• Das Terminal wird von Aufgaben wiederverwendet, drücken Sie zum Schließen eine beliebige Taste.

[tbnobody]

Der Fehler wurde mit 6a3fbc7 bzw. fefe0cd behoben...

[joachim-beck]

Vielen Dank!