Issue with the latest firmware version

[gd35]

I just upgraded the firmware with the latest version. I did not do it for a while. However, since the upgrade, the reporting of data is not done on a regular basis (with OpenHAB):

Left side: with the old version of the firmware
Right side: with the new one

The live data show this:

It seems that the Data Age is quite high. The hardware configuration is the same. I did not change anything except the firmware upgrade

Do you have any idea about the issue ?

[tbnobody]

Do you know from which version you where coming from? without this its quite hard to determine the changes. But the most changes in the last days/weeks where interface related. They had nothing to do with the fetching of the inverter itself.

[gd35]

I did not remember exactly... it was a version published in September when I started to build the device. But I did a little progress on that issue since my first post. I have had to do the configuration again after the upgrade. I just changed the DTU setting (Maximum for the PA Level, it was High before). Then, the data age is decreasing. So I suspect it is a reception problem. It is time to buy a new nrf24L01+ module with an antenna ! I like very much the new firmware version. Thanks for your help

[tbnobody]

The config re-do issue has to do with this: #285

Regarding another RF module. It seems that modules from ebyte are much more reliable
e.g. something like this: https://www.amazon.de/Ebyte-E01-ML01DP5-Transmitter-Empf%C3%A4nger-nRF24L01P/dp/B07P8TTHZH/

They are also pin compatible (you maybe need a 2,4ghz antenna)

[gd35]

Amazing, this module was already in my amazon basket shop before replying to your message. I recently bought an ebyte CC1101 module to receive data from my water meter for the same reason. And yes, they ebyte modules are much much better!. Thanks.

[gd35]

Just received the new module with its antenna. It works like a charm.
Thanks.