Token refresh is not working for me #130
Replies: 8 comments 4 replies
-
|
Additional info. I turned on debug logging on the orangePI. It tries to refresh the token, but this is what happens:
|
Beta Was this translation helpful? Give feedback.
-
|
I had the same problem and could solve it by going back to older versions of some of the python packages used by teslapy. Have a look at this issue: Fabian |
Beta Was this translation helpful? Give feedback.
-
|
Hi Fabian,That sounds really promising. I will test this asap.Cheers,HansOp 6 jun. 2023 om 16:20 heeft fbphysik ***@***.***> het volgende geschreven:
I had the same problem and could solve it by going back to older versions of some of the python packages used by teslapy. Have a look at this issue:
#128
Fabian
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Works like a charm. Thanks a million!!!!!!
… On 6 Jun 2023, at 16:20, fbphysik ***@***.***> wrote:
I had the same problem and could solve it by going back to older versions of some of the python packages used by teslapy. Have a look at this issue:
#128 <#128>
Fabian
—
Reply to this email directly, view it on GitHub <#130 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABKBYTW7LVBBRTU2WCYSDBTXJ44CDANCNFSM6AAAAAAYQHJAUE>.
You are receiving this because you authored the thread.
|
Beta Was this translation helpful? Give feedback.
-
|
Had the same problem and reverting the packages worked for me too. Are we locked at those version of the packages or will an updated version of teslapi support the newest packages? |
Beta Was this translation helpful? Give feedback.
-
|
Do we know which of those packages is the culprit? |
Beta Was this translation helpful? Give feedback.
-
|
I did not investigate that. Op 23 jun. 2023 om 12:59 heeft Tim Dorssers ***@***.***> het volgende geschreven:
Do we know which of those packages is the culprit?
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
I just checked: The other downgrades ('certifi', 'charset-normalizer', 'websocket-client') I mentioned in #128 don't seem to be necessary. |
Beta Was this translation helpful? Give feedback.
-
|
I can't reproduce this. I tried using an expired token, to trigger auto refresh but I don't get a 403. Is it really needed to have a script running for over 8 hours to trigger this? I am looking for a minimal script to reproduce this |
Beta Was this translation helpful? Give feedback.
-
|
No, there is no long running script necessary to reproduce the error. My steps are:
import teslapy
tesla = teslapy.Tesla('[email protected]')
if not tesla.authorized:
print('Use browser to login. Page Not Found will be shown at success.')
print('Open this URL: ' + tesla.authorization_url())
tesla.fetch_token(authorization_response=input('Enter URL after authentication: '))
vehicles = tesla.vehicle_list()
print(vehicles[0])
tesla.close()Python version is 3.9.2, running on a Debian Bullseye system. Let me know if you need any more information or if I can check things for you or send you some debug logs etc. |
Beta Was this translation helpful? Give feedback.
-
|
I ran the above script on Ubuntu 22.04 and could not trigger the error. Packages in my virtual env: certifi==2023.5.7 charset-normalizer==3.1.0 idna==3.4 oauthlib==3.2.2 requests==2.31.0 requests-oauthlib==1.3.1 TeslaPy==2.8.0 urllib3==2.0.3 websocket-client==1.6.1 |
Beta Was this translation helpful? Give feedback.
-
|
I have tested with Python 3.8.10 on Windows and 3.10.6 on Ubuntu with the new urllib3, both work fine. Ubuntu 21.04 comes with Python 3.9.5 which also runs fine. I believe its the combination urllib3 2.0.x and Python 3.9.2 (and some older versions as well), but I can't find out what's going wrong here. The HTTP request is identical compared to a working situation, but still the servers respond with 403. I think Debian 11 users should use |
Beta Was this translation helpful? Give feedback.
-
I have obtained a token (cache.json) via command
python3 cli.py -e <my mail address>I copied the cache.json to the orange zero headless computer where it functions for a while (can interact with my Tesla).
After a while (hours) I get this exception:
Exception during setting of the current: Traceback (most recent call last): File "/home/pi/venv/lib/python3.9/site-packages/requests_oauthlib/oauth2_session.py", line 483, in request url, headers, data = self._client.add_token( File "/home/pi/venv/lib/python3.9/site-packages/oauthlib/oauth2/rfc6749/clients/base.py", line 217, in add_token raise TokenExpiredError() oauthlib.oauth2.rfc6749.errors.TokenExpiredError: (token_expired) During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/pi/net_balancer-main/src/service/tesla_energy_consumer.py", line 129, in start_consuming self.__set_charge_current(new_charging_current) File "/home/pi/net_balancer-main/src/service/tesla_energy_consumer.py", line 278, in __set_charge_current self.vehicle.command("CHARGING_AMPS",charging_amps=amps) File "/home/pi/net_balancer-main/src/teslapy/__init__.py", line 711, in command response = self.api(name, **kwargs).get('response') File "/home/pi/net_balancer-main/src/teslapy/__init__.py", line 488, in api return self.tesla.api(name, {'vehicle_id': self['id_s']}, **kwargs) File "/home/pi/net_balancer-main/src/teslapy/__init__.py", line 369, in api return self.request(endpoint['TYPE'], uri, serialize, File "/home/pi/net_balancer-main/src/teslapy/__init__.py", line 150, in request response = super(Tesla, self).request(method, url, **kwargs) File "/home/pi/venv/lib/python3.9/site-packages/requests_oauthlib/oauth2_session.py", line 502, in request token = self.refresh_token( File "/home/pi/net_balancer-main/src/teslapy/__init__.py", line 249, in refresh_token super(Tesla, self).refresh_token(token_url, **kwargs) File "/home/pi/venv/lib/python3.9/site-packages/requests_oauthlib/oauth2_session.py", line 452, in refresh_token self.token = self._client.parse_request_body_response(r.text, scope=self.scope) File "/home/pi/venv/lib/python3.9/site-packages/oauthlib/oauth2/rfc6749/clients/base.py", line 427, in parse_request_body_response self.token = parse_token_response(body, scope=scope) File "/home/pi/venv/lib/python3.9/site-packages/oauthlib/oauth2/rfc6749/parameters.py", line 441, in parse_token_response validate_token_parameters(params) File "/home/pi/venv/lib/python3.9/site-packages/oauthlib/oauth2/rfc6749/parameters.py", line 451, in validate_token_parameters raise MissingTokenError(description="Missing access token parameter.") oauthlib.oauth2.rfc6749.errors.MissingTokenError: (missing_token) Missing access token parameter.It looks as if the auto refresh is not happening.
I have no clue what I am doing wrong here. Does anybody have a suggestion?
Beta Was this translation helpful? Give feedback.
All reactions