diff --git a/.mvn/wrapper/maven-wrapper.jar b/.mvn/wrapper/maven-wrapper.jar index c1dd12f..cb28b0e 100644 Binary files a/.mvn/wrapper/maven-wrapper.jar and b/.mvn/wrapper/maven-wrapper.jar differ diff --git a/.mvn/wrapper/maven-wrapper.properties b/.mvn/wrapper/maven-wrapper.properties index b74bf7f..6f40a26 100644 --- a/.mvn/wrapper/maven-wrapper.properties +++ b/.mvn/wrapper/maven-wrapper.properties @@ -1,2 +1,18 @@ +# Licensed to the Apache Software Foundation (ASF) under one +# or more contributor license agreements. See the NOTICE file +# distributed with this work for additional information +# regarding copyright ownership. The ASF licenses this file +# to you under the Apache License, Version 2.0 (the +# "License"); you may not use this file except in compliance +# with the License. You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, +# software distributed under the License is distributed on an +# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY +# KIND, either express or implied. See the License for the +# specific language governing permissions and limitations +# under the License. distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.8.6/apache-maven-3.8.6-bin.zip -wrapperUrl=https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.1.0/maven-wrapper-3.1.0.jar +wrapperUrl=https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar diff --git a/.sdkmanrc b/.sdkmanrc index 7512a8b..13d99ef 100644 --- a/.sdkmanrc +++ b/.sdkmanrc @@ -1,3 +1,3 @@ java=17.0.8-tem -gradle=8.5 +gradle=8.8 maven=3.8.6 \ No newline at end of file diff --git a/README.md b/README.md index 82c9fbf..d94e5d4 100644 --- a/README.md +++ b/README.md @@ -44,3 +44,14 @@ $ ./mvnw verify //for Maven ``` The tests should pass. + +> [!NOTE] +> The project is configured to automate the code formatting with spotless plugin +> using prettier-plugin-java, which internally requires Node.js runtime. +> If you don't have Node.js installed and want to disable the code formatting, +> you can pass additional parameter to the build command as shown below: + +```shell +./gradlew build -x spotlessCheck //for Gradle +./mvnw verify -Dspotless.check.skip=true //for Maven +``` diff --git a/build.gradle b/build.gradle index af12cc6..16c552b 100644 --- a/build.gradle +++ b/build.gradle @@ -1,8 +1,8 @@ plugins { id 'java' - id 'org.springframework.boot' version '3.2.0' - id 'io.spring.dependency-management' version '1.1.4' - id 'com.diffplug.spotless' version "6.23.0" + id 'org.springframework.boot' version '3.3.0' + id 'io.spring.dependency-management' version '1.1.5' + id 'com.diffplug.spotless' version "6.25.0" } group = 'com.testcontainers' @@ -20,7 +20,7 @@ repositories { } ext { - set('testcontainersVersion', "1.19.3") + set('testcontainersVersion', "1.19.8") } dependencies { diff --git a/gradle/wrapper/gradle-wrapper.properties b/gradle/wrapper/gradle-wrapper.properties index 1af9e09..a441313 100644 --- a/gradle/wrapper/gradle-wrapper.properties +++ b/gradle/wrapper/gradle-wrapper.properties @@ -1,6 +1,6 @@ distributionBase=GRADLE_USER_HOME distributionPath=wrapper/dists -distributionUrl=https\://services.gradle.org/distributions/gradle-8.5-bin.zip +distributionUrl=https\://services.gradle.org/distributions/gradle-8.8-bin.zip networkTimeout=10000 validateDistributionUrl=true zipStoreBase=GRADLE_USER_HOME diff --git a/mvnw b/mvnw index 8a8fb22..8d937f4 100755 --- a/mvnw +++ b/mvnw @@ -8,7 +8,7 @@ # "License"); you may not use this file except in compliance # with the License. You may obtain a copy of the License at # -# https://www.apache.org/licenses/LICENSE-2.0 +# http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, # software distributed under the License is distributed on an @@ -19,7 +19,7 @@ # ---------------------------------------------------------------------------- # ---------------------------------------------------------------------------- -# Maven Start Up Batch script +# Apache Maven Wrapper startup batch script, version 3.2.0 # # Required ENV vars: # ------------------ @@ -27,7 +27,6 @@ # # Optional ENV vars # ----------------- -# M2_HOME - location of maven2's installed home dir # MAVEN_OPTS - parameters passed to the Java VM when running Maven # e.g. to debug Maven itself, use # set MAVEN_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000 @@ -54,7 +53,7 @@ fi cygwin=false; darwin=false; mingw=false -case "`uname`" in +case "$(uname)" in CYGWIN*) cygwin=true ;; MINGW*) mingw=true;; Darwin*) darwin=true @@ -62,9 +61,9 @@ case "`uname`" in # See https://developer.apple.com/library/mac/qa/qa1170/_index.html if [ -z "$JAVA_HOME" ]; then if [ -x "/usr/libexec/java_home" ]; then - export JAVA_HOME="`/usr/libexec/java_home`" + JAVA_HOME="$(/usr/libexec/java_home)"; export JAVA_HOME else - export JAVA_HOME="/Library/Java/Home" + JAVA_HOME="/Library/Java/Home"; export JAVA_HOME fi fi ;; @@ -72,68 +71,38 @@ esac if [ -z "$JAVA_HOME" ] ; then if [ -r /etc/gentoo-release ] ; then - JAVA_HOME=`java-config --jre-home` + JAVA_HOME=$(java-config --jre-home) fi fi -if [ -z "$M2_HOME" ] ; then - ## resolve links - $0 may be a link to maven's home - PRG="$0" - - # need this for relative symlinks - while [ -h "$PRG" ] ; do - ls=`ls -ld "$PRG"` - link=`expr "$ls" : '.*-> \(.*\)$'` - if expr "$link" : '/.*' > /dev/null; then - PRG="$link" - else - PRG="`dirname "$PRG"`/$link" - fi - done - - saveddir=`pwd` - - M2_HOME=`dirname "$PRG"`/.. - - # make it fully qualified - M2_HOME=`cd "$M2_HOME" && pwd` - - cd "$saveddir" - # echo Using m2 at $M2_HOME -fi - # For Cygwin, ensure paths are in UNIX format before anything is touched if $cygwin ; then - [ -n "$M2_HOME" ] && - M2_HOME=`cygpath --unix "$M2_HOME"` [ -n "$JAVA_HOME" ] && - JAVA_HOME=`cygpath --unix "$JAVA_HOME"` + JAVA_HOME=$(cygpath --unix "$JAVA_HOME") [ -n "$CLASSPATH" ] && - CLASSPATH=`cygpath --path --unix "$CLASSPATH"` + CLASSPATH=$(cygpath --path --unix "$CLASSPATH") fi # For Mingw, ensure paths are in UNIX format before anything is touched if $mingw ; then - [ -n "$M2_HOME" ] && - M2_HOME="`(cd "$M2_HOME"; pwd)`" - [ -n "$JAVA_HOME" ] && - JAVA_HOME="`(cd "$JAVA_HOME"; pwd)`" + [ -n "$JAVA_HOME" ] && [ -d "$JAVA_HOME" ] && + JAVA_HOME="$(cd "$JAVA_HOME" || (echo "cannot cd into $JAVA_HOME."; exit 1); pwd)" fi if [ -z "$JAVA_HOME" ]; then - javaExecutable="`which javac`" - if [ -n "$javaExecutable" ] && ! [ "`expr \"$javaExecutable\" : '\([^ ]*\)'`" = "no" ]; then + javaExecutable="$(which javac)" + if [ -n "$javaExecutable" ] && ! [ "$(expr "\"$javaExecutable\"" : '\([^ ]*\)')" = "no" ]; then # readlink(1) is not available as standard on Solaris 10. - readLink=`which readlink` - if [ ! `expr "$readLink" : '\([^ ]*\)'` = "no" ]; then + readLink=$(which readlink) + if [ ! "$(expr "$readLink" : '\([^ ]*\)')" = "no" ]; then if $darwin ; then - javaHome="`dirname \"$javaExecutable\"`" - javaExecutable="`cd \"$javaHome\" && pwd -P`/javac" + javaHome="$(dirname "\"$javaExecutable\"")" + javaExecutable="$(cd "\"$javaHome\"" && pwd -P)/javac" else - javaExecutable="`readlink -f \"$javaExecutable\"`" + javaExecutable="$(readlink -f "\"$javaExecutable\"")" fi - javaHome="`dirname \"$javaExecutable\"`" - javaHome=`expr "$javaHome" : '\(.*\)/bin'` + javaHome="$(dirname "\"$javaExecutable\"")" + javaHome=$(expr "$javaHome" : '\(.*\)/bin') JAVA_HOME="$javaHome" export JAVA_HOME fi @@ -149,7 +118,7 @@ if [ -z "$JAVACMD" ] ; then JAVACMD="$JAVA_HOME/bin/java" fi else - JAVACMD="`\\unset -f command; \\command -v java`" + JAVACMD="$(\unset -f command 2>/dev/null; \command -v java)" fi fi @@ -163,12 +132,9 @@ if [ -z "$JAVA_HOME" ] ; then echo "Warning: JAVA_HOME environment variable is not set." fi -CLASSWORLDS_LAUNCHER=org.codehaus.plexus.classworlds.launcher.Launcher - # traverses directory structure from process work directory to filesystem root # first directory with .mvn subdirectory is considered project base directory find_maven_basedir() { - if [ -z "$1" ] then echo "Path not specified to find_maven_basedir" @@ -184,96 +150,99 @@ find_maven_basedir() { fi # workaround for JBEAP-8937 (on Solaris 10/Sparc) if [ -d "${wdir}" ]; then - wdir=`cd "$wdir/.."; pwd` + wdir=$(cd "$wdir/.." || exit 1; pwd) fi # end of workaround done - echo "${basedir}" + printf '%s' "$(cd "$basedir" || exit 1; pwd)" } # concatenates all lines of a file concat_lines() { if [ -f "$1" ]; then - echo "$(tr -s '\n' ' ' < "$1")" + # Remove \r in case we run on Windows within Git Bash + # and check out the repository with auto CRLF management + # enabled. Otherwise, we may read lines that are delimited with + # \r\n and produce $'-Xarg\r' rather than -Xarg due to word + # splitting rules. + tr -s '\r\n' ' ' < "$1" + fi +} + +log() { + if [ "$MVNW_VERBOSE" = true ]; then + printf '%s\n' "$1" fi } -BASE_DIR=`find_maven_basedir "$(pwd)"` +BASE_DIR=$(find_maven_basedir "$(dirname "$0")") if [ -z "$BASE_DIR" ]; then exit 1; fi +MAVEN_PROJECTBASEDIR=${MAVEN_BASEDIR:-"$BASE_DIR"}; export MAVEN_PROJECTBASEDIR +log "$MAVEN_PROJECTBASEDIR" + ########################################################################################## # Extension to allow automatically downloading the maven-wrapper.jar from Maven-central # This allows using the maven wrapper in projects that prohibit checking in binary data. ########################################################################################## -if [ -r "$BASE_DIR/.mvn/wrapper/maven-wrapper.jar" ]; then - if [ "$MVNW_VERBOSE" = true ]; then - echo "Found .mvn/wrapper/maven-wrapper.jar" - fi +wrapperJarPath="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar" +if [ -r "$wrapperJarPath" ]; then + log "Found $wrapperJarPath" else - if [ "$MVNW_VERBOSE" = true ]; then - echo "Couldn't find .mvn/wrapper/maven-wrapper.jar, downloading it ..." - fi + log "Couldn't find $wrapperJarPath, downloading it ..." + if [ -n "$MVNW_REPOURL" ]; then - jarUrl="$MVNW_REPOURL/org/apache/maven/wrapper/maven-wrapper/3.1.0/maven-wrapper-3.1.0.jar" + wrapperUrl="$MVNW_REPOURL/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar" else - jarUrl="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.1.0/maven-wrapper-3.1.0.jar" + wrapperUrl="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar" fi - while IFS="=" read key value; do - case "$key" in (wrapperUrl) jarUrl="$value"; break ;; + while IFS="=" read -r key value; do + # Remove '\r' from value to allow usage on windows as IFS does not consider '\r' as a separator ( considers space, tab, new line ('\n'), and custom '=' ) + safeValue=$(echo "$value" | tr -d '\r') + case "$key" in (wrapperUrl) wrapperUrl="$safeValue"; break ;; esac - done < "$BASE_DIR/.mvn/wrapper/maven-wrapper.properties" - if [ "$MVNW_VERBOSE" = true ]; then - echo "Downloading from: $jarUrl" - fi - wrapperJarPath="$BASE_DIR/.mvn/wrapper/maven-wrapper.jar" + done < "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties" + log "Downloading from: $wrapperUrl" + if $cygwin; then - wrapperJarPath=`cygpath --path --windows "$wrapperJarPath"` + wrapperJarPath=$(cygpath --path --windows "$wrapperJarPath") fi if command -v wget > /dev/null; then - if [ "$MVNW_VERBOSE" = true ]; then - echo "Found wget ... using wget" - fi + log "Found wget ... using wget" + [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--quiet" if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then - wget "$jarUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath" + wget $QUIET "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath" else - wget --http-user=$MVNW_USERNAME --http-password=$MVNW_PASSWORD "$jarUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath" + wget $QUIET --http-user="$MVNW_USERNAME" --http-password="$MVNW_PASSWORD" "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath" fi elif command -v curl > /dev/null; then - if [ "$MVNW_VERBOSE" = true ]; then - echo "Found curl ... using curl" - fi + log "Found curl ... using curl" + [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--silent" if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then - curl -o "$wrapperJarPath" "$jarUrl" -f + curl $QUIET -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath" else - curl --user $MVNW_USERNAME:$MVNW_PASSWORD -o "$wrapperJarPath" "$jarUrl" -f + curl $QUIET --user "$MVNW_USERNAME:$MVNW_PASSWORD" -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath" fi - else - if [ "$MVNW_VERBOSE" = true ]; then - echo "Falling back to using Java to download" - fi - javaClass="$BASE_DIR/.mvn/wrapper/MavenWrapperDownloader.java" + log "Falling back to using Java to download" + javaSource="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.java" + javaClass="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.class" # For Cygwin, switch paths to Windows format before running javac if $cygwin; then - javaClass=`cygpath --path --windows "$javaClass"` + javaSource=$(cygpath --path --windows "$javaSource") + javaClass=$(cygpath --path --windows "$javaClass") fi - if [ -e "$javaClass" ]; then - if [ ! -e "$BASE_DIR/.mvn/wrapper/MavenWrapperDownloader.class" ]; then - if [ "$MVNW_VERBOSE" = true ]; then - echo " - Compiling MavenWrapperDownloader.java ..." - fi - # Compiling the Java class - ("$JAVA_HOME/bin/javac" "$javaClass") + if [ -e "$javaSource" ]; then + if [ ! -e "$javaClass" ]; then + log " - Compiling MavenWrapperDownloader.java ..." + ("$JAVA_HOME/bin/javac" "$javaSource") fi - if [ -e "$BASE_DIR/.mvn/wrapper/MavenWrapperDownloader.class" ]; then - # Running the downloader - if [ "$MVNW_VERBOSE" = true ]; then - echo " - Running MavenWrapperDownloader.java ..." - fi - ("$JAVA_HOME/bin/java" -cp .mvn/wrapper MavenWrapperDownloader "$MAVEN_PROJECTBASEDIR") + if [ -e "$javaClass" ]; then + log " - Running MavenWrapperDownloader.java ..." + ("$JAVA_HOME/bin/java" -cp .mvn/wrapper MavenWrapperDownloader "$wrapperUrl" "$wrapperJarPath") || rm -f "$wrapperJarPath" fi fi fi @@ -282,35 +251,58 @@ fi # End of extension ########################################################################################## -export MAVEN_PROJECTBASEDIR=${MAVEN_BASEDIR:-"$BASE_DIR"} -if [ "$MVNW_VERBOSE" = true ]; then - echo $MAVEN_PROJECTBASEDIR +# If specified, validate the SHA-256 sum of the Maven wrapper jar file +wrapperSha256Sum="" +while IFS="=" read -r key value; do + case "$key" in (wrapperSha256Sum) wrapperSha256Sum=$value; break ;; + esac +done < "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties" +if [ -n "$wrapperSha256Sum" ]; then + wrapperSha256Result=false + if command -v sha256sum > /dev/null; then + if echo "$wrapperSha256Sum $wrapperJarPath" | sha256sum -c > /dev/null 2>&1; then + wrapperSha256Result=true + fi + elif command -v shasum > /dev/null; then + if echo "$wrapperSha256Sum $wrapperJarPath" | shasum -a 256 -c > /dev/null 2>&1; then + wrapperSha256Result=true + fi + else + echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available." + echo "Please install either command, or disable validation by removing 'wrapperSha256Sum' from your maven-wrapper.properties." + exit 1 + fi + if [ $wrapperSha256Result = false ]; then + echo "Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised." >&2 + echo "Investigate or delete $wrapperJarPath to attempt a clean download." >&2 + echo "If you updated your Maven version, you need to update the specified wrapperSha256Sum property." >&2 + exit 1 + fi fi + MAVEN_OPTS="$(concat_lines "$MAVEN_PROJECTBASEDIR/.mvn/jvm.config") $MAVEN_OPTS" # For Cygwin, switch paths to Windows format before running java if $cygwin; then - [ -n "$M2_HOME" ] && - M2_HOME=`cygpath --path --windows "$M2_HOME"` [ -n "$JAVA_HOME" ] && - JAVA_HOME=`cygpath --path --windows "$JAVA_HOME"` + JAVA_HOME=$(cygpath --path --windows "$JAVA_HOME") [ -n "$CLASSPATH" ] && - CLASSPATH=`cygpath --path --windows "$CLASSPATH"` + CLASSPATH=$(cygpath --path --windows "$CLASSPATH") [ -n "$MAVEN_PROJECTBASEDIR" ] && - MAVEN_PROJECTBASEDIR=`cygpath --path --windows "$MAVEN_PROJECTBASEDIR"` + MAVEN_PROJECTBASEDIR=$(cygpath --path --windows "$MAVEN_PROJECTBASEDIR") fi # Provide a "standardized" way to retrieve the CLI args that will # work with both Windows and non-Windows executions. -MAVEN_CMD_LINE_ARGS="$MAVEN_CONFIG $@" +MAVEN_CMD_LINE_ARGS="$MAVEN_CONFIG $*" export MAVEN_CMD_LINE_ARGS WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain +# shellcheck disable=SC2086 # safe args exec "$JAVACMD" \ $MAVEN_OPTS \ $MAVEN_DEBUG_OPTS \ -classpath "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar" \ - "-Dmaven.home=${M2_HOME}" \ "-Dmaven.multiModuleProjectDirectory=${MAVEN_PROJECTBASEDIR}" \ ${WRAPPER_LAUNCHER} $MAVEN_CONFIG "$@" diff --git a/mvnw.cmd b/mvnw.cmd index 1d8ab01..c4586b5 100644 --- a/mvnw.cmd +++ b/mvnw.cmd @@ -7,7 +7,7 @@ @REM "License"); you may not use this file except in compliance @REM with the License. You may obtain a copy of the License at @REM -@REM https://www.apache.org/licenses/LICENSE-2.0 +@REM http://www.apache.org/licenses/LICENSE-2.0 @REM @REM Unless required by applicable law or agreed to in writing, @REM software distributed under the License is distributed on an @@ -18,13 +18,12 @@ @REM ---------------------------------------------------------------------------- @REM ---------------------------------------------------------------------------- -@REM Maven Start Up Batch script +@REM Apache Maven Wrapper startup batch script, version 3.2.0 @REM @REM Required ENV vars: @REM JAVA_HOME - location of a JDK home dir @REM @REM Optional ENV vars -@REM M2_HOME - location of maven2's installed home dir @REM MAVEN_BATCH_ECHO - set to 'on' to enable the echoing of the batch commands @REM MAVEN_BATCH_PAUSE - set to 'on' to wait for a keystroke before ending @REM MAVEN_OPTS - parameters passed to the Java VM when running Maven @@ -120,10 +119,10 @@ SET MAVEN_JAVA_EXE="%JAVA_HOME%\bin\java.exe" set WRAPPER_JAR="%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.jar" set WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain -set DOWNLOAD_URL="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.1.0/maven-wrapper-3.1.0.jar" +set WRAPPER_URL="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar" FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO ( - IF "%%A"=="wrapperUrl" SET DOWNLOAD_URL=%%B + IF "%%A"=="wrapperUrl" SET WRAPPER_URL=%%B ) @REM Extension to allow automatically downloading the maven-wrapper.jar from Maven-central @@ -134,11 +133,11 @@ if exist %WRAPPER_JAR% ( ) ) else ( if not "%MVNW_REPOURL%" == "" ( - SET DOWNLOAD_URL="%MVNW_REPOURL%/org/apache/maven/wrapper/maven-wrapper/3.1.0/maven-wrapper-3.1.0.jar" + SET WRAPPER_URL="%MVNW_REPOURL%/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar" ) if "%MVNW_VERBOSE%" == "true" ( echo Couldn't find %WRAPPER_JAR%, downloading it ... - echo Downloading from: %DOWNLOAD_URL% + echo Downloading from: %WRAPPER_URL% ) powershell -Command "&{"^ @@ -146,7 +145,7 @@ if exist %WRAPPER_JAR% ( "if (-not ([string]::IsNullOrEmpty('%MVNW_USERNAME%') -and [string]::IsNullOrEmpty('%MVNW_PASSWORD%'))) {"^ "$webclient.Credentials = new-object System.Net.NetworkCredential('%MVNW_USERNAME%', '%MVNW_PASSWORD%');"^ "}"^ - "[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; $webclient.DownloadFile('%DOWNLOAD_URL%', '%WRAPPER_JAR%')"^ + "[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; $webclient.DownloadFile('%WRAPPER_URL%', '%WRAPPER_JAR%')"^ "}" if "%MVNW_VERBOSE%" == "true" ( echo Finished downloading %WRAPPER_JAR% @@ -154,6 +153,24 @@ if exist %WRAPPER_JAR% ( ) @REM End of extension +@REM If specified, validate the SHA-256 sum of the Maven wrapper jar file +SET WRAPPER_SHA_256_SUM="" +FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO ( + IF "%%A"=="wrapperSha256Sum" SET WRAPPER_SHA_256_SUM=%%B +) +IF NOT %WRAPPER_SHA_256_SUM%=="" ( + powershell -Command "&{"^ + "$hash = (Get-FileHash \"%WRAPPER_JAR%\" -Algorithm SHA256).Hash.ToLower();"^ + "If('%WRAPPER_SHA_256_SUM%' -ne $hash){"^ + " Write-Output 'Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised.';"^ + " Write-Output 'Investigate or delete %WRAPPER_JAR% to attempt a clean download.';"^ + " Write-Output 'If you updated your Maven version, you need to update the specified wrapperSha256Sum property.';"^ + " exit 1;"^ + "}"^ + "}" + if ERRORLEVEL 1 goto error +) + @REM Provide a "standardized" way to retrieve the CLI args that will @REM work with both Windows and non-Windows executions. set MAVEN_CMD_LINE_ARGS=%* diff --git a/pom.xml b/pom.xml index 3ec0091..748755a 100644 --- a/pom.xml +++ b/pom.xml @@ -7,7 +7,7 @@ org.springframework.boot spring-boot-starter-parent - 3.2.0 + 3.3.0 com.testcontainers @@ -17,7 +17,7 @@ Testing REST API integrations using MockServer 17 - 1.19.3 + 1.19.8 @@ -76,7 +76,7 @@ com.diffplug.spotless spotless-maven-plugin - 2.41.0 + 2.43.0