Skip to content

Latest commit

 

History

History
426 lines (338 loc) · 30.7 KB

INSTALL.md

File metadata and controls

426 lines (338 loc) · 30.7 KB
Raw

TiledArray Installation Guide

Synopsis

$ git clone https://github.com/ValeevGroup/TiledArray.git tiledarray
$ cd tiledarray
$ cmake -B build \
    -D CMAKE_INSTALL_PREFIX=/path/to/tiledarray/install \
    -D CMAKE_TOOLCHAIN_FILE=cmake/vg/toolchains/<toolchain-file-for-your-platform>.cmake \
    .
$ cmake --build build
(recommended, but optional): $ cmake --build build --target check
$ cmake --build build --target install

Introduction

There are 2 ways to build TiledArray:

  • by searching for pre-compiled dependencies first; some dependencies, if they are not found, TiledArray will build from source, and
  • by building all critical dependencies from source.

Both methods are supported. However, for most users we strongly recommend to build as many dependencies from source as possible. Only package maintainers have necessary expertise to properly build TiledArray from separately built components. Hence by default TiledArray will not look for precompiled versions of critical dependencies (MADNESS, BTAS, etc.).

Prerequisites

  • C++ compiler with support for the C++17 standard, or a more recent standard. This includes the following compilers:

    See the current Travis CI matrix for the most up-to-date list of compilers that are known to work.

  • CMake, version 3.15 or higher; if CUDA support is needed, CMake 3.18 or higher is required.

  • Git 1.8 or later (required to obtain TiledArray and MADNESS source code from GitHub)

  • Eigen, version 3.3 or higher; if CUDA is enabled then 3.3.7 is required (will be downloaded automatically, if missing)

  • Boost libraries, version 1.59 or higher (will be downloaded automatically, if missing). The following principal Boost components are used:

    • Boost.Iterator: header-only
    • Boost.Container: header-only
    • Boost.Test: header-only or (optionally) as a compiled library, only used for unit testing
    • Boost.Range: header-only, only used for unit testing

  • BTAS, tag e540f265e1d16cc35b1b6726470160ed0046c530 . If usable BTAS installation is not found, TiledArray will download and compile BTAS from source. This is the recommended way to compile BTAS for all users.

  • MADNESS, tag f9aa38e4f46c5ea6ca6bbceb945beae5230f9ad0 . Only the MADworld runtime and BLAS/LAPACK C API component of MADNESS is used by TiledArray. If usable MADNESS installation is not found, TiledArray will download and compile MADNESS from source. This is the recommended way to compile MADNESS for all users. A detailed list of MADNESS prerequisites can be found at MADNESS' INSTALL file; it also also contains detailed MADNESS compilation instructions.

Compiling MADNESS requires the following prerequisites:

  • An implementation of Message Passing Interface version 2 or 3, with support for MPI_THREAD_MULTIPLE.
  • (optional) Intel Thread Building Blocks (TBB), available in a commercial or an open-source form

Compiling BTAS requires the following prerequisites:

  • blaspp -- C++ API for BLAS
  • lapackpp -- C++ API for LAPACK
  • BLAS and LAPACK libraries

Optional prerequisites:

  • CUDA compiler and runtime -- for execution on CUDA-enabled accelerators. CUDA 11 or later is required. Support for CUDA also requires the following additional prerequisites, both of which will be built and installed automatically if missing:
    • cuTT -- CUDA transpose library; note that our fork of the original cuTT repo is required to provide thread-safety (tag 0e8685bf82910bc7435835f846e88f1b39f47f09).
    • Umpire -- portable memory manager for heterogeneous platforms (tag f9640e0fa4245691cdd434e4f719ac5f7d455f82).
  • Doxygen -- for building documentation (version 1.8.12 or later).
  • ScaLAPACK -- a distributed-memory linear algebra package. If detected, the following C++ components will also be sought and downloaded, if missing:
    • blacspp -- a modern C++ (C++17) wrapper for BLACS (tag 88076f1706be083ead882f6ce0bfc6884a72fc03)
    • scalapackpp -- a modern C++ (C++17) wrapper for ScaLAPACK (tag 28433942197aee141cd9e96ed1d00f6ec7b902cb)
  • Python3 interpreter -- to test (optionally-built) Python bindings
  • Range-V3 -- a Ranges library that served as the basis for Ranges component of C++20; only used for some unit testing of the functionality anticipated to be supported by future C++ standards.

Most of the dependencies (except for MADNESS and BTAS) can be installed with a package manager, such as Homebrew on OS X or apt-get on Debian Linux distributions; this is the preferred method. Since on some systems configuring and building MADNESS can be difficult even for experts, we recommend letting the TiledArray download and build MADNESS for you.

Obtain TiledArray source code

Check out the source code as follows:

$ git clone https://github.com/ValeevGroup/tiledarray.git

It is necessary to compile TiledArray outside of the source code tree. Most users can simply create a build directory inside the source tree:

$ cd tiledarray; mkdir build; cd build

Instructions below assume that you are located in the build directory. We will assume that the environment variable TILEDARRAY_SOURCE_DIR specifies the location of the TiledArray source tree.

Configure TiledArray

TiledArray is configured and built with CMake. When configuring with CMake, you specify a set of CMake variables on the command line, where each variable argument is prepended with the '-D' option. Typically, you will need to specify the install path for TiledArray, build type, and MPI Compiler wrappers.

For basic builds you may not need to provide any arguments to CMake, however most users will want to nudge CMake towards configuring TiledArray as desired by specifying the C++ compiler to use, the MPI compiler wrapper to use, etc. The Valeev Research Group provides a number of toolchain files that can be used to specify a generic or a specific platform, e.g. to compile MPQC on MacOS use this script:

$ cmake -D CMAKE_INSTALL_PREFIX=/path/to/install/tiledarray \
        -D CMAKE_BUILD_TYPE=Release \
        -D CMAKE_TOOLCHAIN_FILE=cmake/vg/toolchains/macos-clang-mpi-accelerate.cmake \
        $TILEDARRAY_SOURCE_DIR

Note that the macos-clang-mpi-accelerate toolchain file is part of the the Valeev Group CMake kit which is downloaded and placed within the build tree by CMake at configure time.

Following are several common examples of configuring TiledArray where instead of a toolchain file we specify CMake variables "manually" (on the command line).

  • Basic configuration. This will search for dependencies on your system. If the required dependencies are not found on your system, they will be downloaded and installed during the build process (this includes Eigen, Boost, and MADNESS, but not MPI or TBB). The CMAKE_PREFIX_PATH cache variables is a semicolon separated list of search paths.
$ cmake -D CMAKE_INSTALL_PREFIX=/path/to/install/tiledarray \
        -D CMAKE_BUILD_TYPE=Release \
        -D CMAKE_PREFIX_PATH=/path/to/dependency;/path/to/another/dependency \
        $TILEDARRAY_SOURCE_DIR
  • Basic configuration with unit tests.
$ cmake -D CMAKE_INSTALL_PREFIX=/path/to/install/tiledarray \
        -D CMAKE_BUILD_TYPE=Debug \
        -D BOOST_ROOT=/path/to/boost \
        -D CMAKE_PREFIX_PATH=/path/to/dependency;/path/to/another/dependency \
        $TILEDARRAY_SOURCE_DIR
  • Specify dependencies, w/o MADNESS installed on the system
$ cmake -D CMAKE_INSTALL_PREFIX=/path/to/install/tiledarray \
        -D CMAKE_BUILD_TYPE=Release \
        -D EIGEN3_INCLUDE_DIR=/path/to/eigen/include/eigen3 \
        -D LAPACK_LIBRARIES="-L/path/to/lapack/lib -llapack -L/path/to/blas/lib -lblas" \
        -D TBB_ROOT_DIR=/path/to/tbb \
        -D CMAKE_C_COMPILER=gcc \
        -D CMAKE_CXX_COMPILER=g++ \
        -D MPI_C_COMPILER=mpicc \
        -D MPI_CXX_COMPILER=mpicxx \
        $TILEDARRAY_SOURCE_DIR
  • Specify dependencies, w/ MADNESS installed on the system
$ cmake -D CMAKE_INSTALL_PREFIX=/path/to/install/tiledarray \
        -D CMAKE_BUILD_TYPE=Release \
        -D EIGEN3_INCLUDE_DIR=/path/to/eigen/include/eigen3 \
        -D LAPACK_LIBRARIES="-L/path/to/lapack/lib -llapack -L/path/to/blas/lib -lblas" \
        -D MADNESS_ROOT_DIR=/path/to/madness \
        -D CMAKE_C_COMPILER=gcc \
        -D CMAKE_CXX_COMPILER=g++ \
        -D MPI_C_COMPILER=mpicc \
        -D MPI_CXX_COMPILER=mpicxx \
        $TILEDARRAY_SOURCE_DIR

Additional CMake variables are given below.

Common CMake variables

  • CMAKE_C_COMPILER -- The C compiler
  • CMAKE_CXX_COMPILER -- The C++ compiler
  • CMAKE_C_FLAGS -- The C compile flags (includes CPPFLAGS and CFLAGS)
  • CMAKE_CXX_FLAGS -- The C++ compile flags (includes CPPFLAGS and CXXFLAGS)
  • CMAKE_EXE_LINKER_FLAGS -- The linker flags
  • CMAKE_BUILD_TYPE -- Optimization/debug build type options include Debug (optimization off, debugging symbols and assersions on), Release (optimization on, debugging symbols and assertions off), RelWithDebInfo (optimization on, debugging symbols and assertions on) and MinSizeRel (same as Release but optimized for executable size). The default is empty build type. It is recommended that you set the build type explicitly.
  • BUILD_SHARED_LIBS -- Enable shared libraries. This option is only available if the platform supports shared libraries; if that's true and TA_ASSUMES_ASLR_DISABLED is ON (see below) the default is ON, otherwise the default is OFF.
  • CMAKE_CXX_STANDARD -- Specify the C++ ISO Standard to use. Valid values are 17 (default), and 20.

Most of these are best specified in a toolchain file. TiledArray is recommended to use the toolchains distributed via the Valeev Group CMake kit. TiledArray by default downloads (via the FetchContent CMake module) the VG CMake toolkit which makes the toolchains available without having to download the toolchain files manually. E.g., to use toolchain x from the VG CMake kit repository provide -DCMAKE_TOOLCHAIN_FILE=cmake/vg/toolchains/x.cmake to CMake when configuring TiledArray.

It is typically not necessary to specify optimization or debug flags as the default values provided by CMake are usually correct.

TiledArray, MADNESS runtime, and the Address Space Layout Randomization (ASLR)

ASLR is a standard technique for increasing platform security implemented by the OS kernel and/or the dynamic linker by randomizing both where the shared libraries are loaded as well as (when enabled) the absolute position of the executable in memory (such executables are known as position-independent executables). Until recently TiledArray and other MADNESS-based applications could not be used on platforms with ASLR if ran with more than 1 MPI rank; if properly configured and built TA can now be safely used on ASLR platforms. Use the following variables to control the ASLR-related aspects of TiledArray and the underlying MADNESS runtime.

  • TA_ASSUMES_ASLR_DISABLED -- TiledArray and MADNESS runtime will assume that the Address Space Layout Randomization (ASLR) is off. By default TA_ASSUMES_ASLR_DISABLED is set to OFF (i.e. ASLR is assumed to be enabled); this will cause all TiledArray libraries by default to be static (BUILD_SHARED_LIBS=OFF) and compiled as position-independent code (CMAKE_POSITION_INDEPENDENT_CODE=ON). This will also enable a runtime check in MADworld for ASLR.
  • CMAKE_POSITION_INDEPENDENT_CODE -- This standard CMake variable controls whether targets are compiled by default as position-independent code or not. If BUILD_SHARED_LIBS=OFF need to set this to ON if want to use the TiledArray libraries to build shared libraries or position-independent executables.

To make things more concrete, consider the following 2 scenarios:

  • Platform with ASLR disabled -- set TA_ASSUMES_ASLR_DISABLED=ON to set the defaults correctly and enable the ASLR check. BUILD_SHARED_LIBS can be set to ON (to produce shared TA/MADworld libraries, e.g., to minimize the executable size) or to OFF to produce static libraries. If the TA+MADworld static libraries will be linked into shared libraries set CMAKE_POSITION_INDEPENDENT_CODE=ON, otherwise CMAKE_POSITION_INDEPENDENT_CODE will be set to OFF for maximum efficiency of function calls.
  • Platform with ASLR enabled -- this is the default. Setting BUILD_SHARED_LIBS=ON in this scenario will produce executables that can only be safely used with 1 MPI rank, thus BUILD_SHARED_LIBS will be defaulted to OFF (i.e. TA+MADworld libraries will be built as static libraries). CMAKE_POSITION_INDEPENDENT_CODE is by default set to ON, thus TA+MADworld libraries can be linked into position-independent executables safely. TA+MADworld libraries can also be linked into a shared library, provided that ALL code using TA+MADworld is part of the SAME shared library. E.g. to link TA+MADworld into a Python module compile TA+MADworld libraries and their dependents as static libraries (with CMAKE_POSITION_INDEPENDENT_CODE=ON) and link them all together into a single module (same logic applies to shared libraries using TA+MADworld).

MPI

You may choose from MPICH, MVAPICH, OpenMPI, Intel MPI, or your vendor provided MPI implementation. Specify the C and C++ MPI compiler wrappers with the following CMake cache variables:

  • MPI_C_COMPILER -- The MPI C compiler wrapper
  • MPI_CXX_COMPILER -- The MPI C++ compiler wrapper

You can build TiledArray without MPI support by setting ENABLE_MPI to OFF. Though we strongly recommend compiling with MPI even if you do not intend to use TiledArray in a distributed memory environment. Note, if you build MADNESS yourself, you must also configure MADNESS with ENABLE_MPI=OFF to enable this option.

Linear Algebra: BLAS/LAPACK/ScaLAPACK

Even for basic operation TiledArray requires a serial BLAS implementation, either by linking with a serial version of the BLAS library or by setting the number of threads to one (1) with an environment variable. This is necessary because TiledArray evaluates tensor expressions in parallel by subdividing them into small tasks, each of which is assumed to be single-threaded; attempting to run a multi-threaded BLAS function inside tasks will oversubscribe the hardware cores (this only exception to this if the MADNESS runtime uses the same task backend as the BLAS library; this only happens if MADNESS is configured to use Intel TBB and TBB-based Intel MKL library is used). Thus it is user's responsibility to correctly specify the BLAS/LAPACK libraries and/or set the environment variables (e.g. OMP_NUM_THREADS, MKL_NUM_THREADS, etc.) to ensure single-threaded execution of BLAS/LAPACK kernels as needed.

As of version 1.0 TiledArray also provides a direct (non-iterative) linear solvers API implemented using LAPACK and (optionally) ScaLAPACK. Therefore LAPACK is now a mandatory prerequisite of TiledArray. The use of ScaLAPACK can be enabled by setting CMake cache variable ENABLE_SCALAPACK to ON.

Robust discovery of linear algebra libraries, and especially their distributed-memory variants, is a complex process. Unfortunately even for serial/shared-memory linear algebra libraries only basic scenarios are supported by the standard CMake modules (e.g., BLAS and LAPACK). There are several discovery mechanisms available for robust discovery of linear algebra in TA:

  • By specifying the BLAS_LIBRARIES, LAPACK_LIBRARIES, and (if ENABLE_SCALAPACK is on) ScaLAPACK_LIBRARIES CMake cache variables via CMake command line or via a toolchain. Doing this overrides all other mechanisms of discovery described below and is recommended if the discovery fails for some reason. To help with setting these variables for specific platforms consider using toolchain files from the Valeev Group CMake kit (see examples above).

  • The default discovery method utilizes the recently developed linear algebra discovery kit developed by David Williams-Young and co-workers for the NWChemEx projectNWChemEx-Project). The discovery modules will override the standard CMake modules for BLAS and LAPACK, provide modules to discover BLACS and ScaLAPACK. These modules will then be invoked to discover the linear algebra libraries as robustly as feasible. The following CMake cache variables can be used to control the behavior of the NWChemEx discovery kit:

    • {BLAS,LAPACK,ScaLAPACK}_PREFERS_STATIC: if set to on, will prefer to link the corresponding component statically.
    • {BLAS,LAPACK,ScaLAPACK}_PREFERENCE_LIST: these specify the variants of the corresponding libraries to search, in the order of preference. The following are permitted values in these lists:
      • ReferenceBLAS: NETLIB reference implementations
      • IntelMKL: Intel Math Kernel Library
      • IBMESSL: IBM Engineering and Scientific Subroutine Library
      • BLIS: BLAS-Like Instantiation Software
      • OpenBLAS: OpenBLAS
      • Accelerate: Apple's Accelerate framework
      • FLAME: (LAPACK-only) libFLAME N.B. These differ from the recognized values of the BLA_VENDOR variable used by the BLAS+LAPACK CMake modules.

  • If the use of the NWChemEx kit is disabled by setting CMake cache variable ENABLE_WFN91_LINALG_DISCOVERY_KIT to OFF BLAS/LAPACK are imported transitively via the BLAS++/LAPACK++ libraries (which are themselves imported transitively via the BTAS library). Under the most common scenario, where TiledArray will configure and compile BTAS dependency and its BLAS++/LAPACK++ prerequisites from source (this is strongly recommended), BLAS/LAPACK will thus be discovered and imported by BLAS++/LAPACK++ during the TA configuration. There are 2 mechanisms by which BLAS++/LAPACK++ discover BLAS/LAPACK:

    • the built-in custom discovery kit; no options exist to provide any control
    • standard CMake BLAS/LAPACK modules.

    The latter is used if CMake cache variable BLA_VENDOR is specified:

    • BLA_VENDOR -- controls which vendor BLAS/LAPACK library will be sought (see CMake docs); by default all possible vendor libraries will be considered. E.g., to force the use of the Accelerate framework on MacOS use -DBLA_VENDOR=Apple.

    Unfortunately, if the standard CMake modules discover BLAS/LAPACK, BLAS++/LAPACK++ will not attempt to discover their name mangling convention. To specify the name mangling to be assumed by BLAS++/LAPACK++ specify CMake cache variable LINALG_MANGLING:

    • LINALG_MANGLING -- specifies the name mangling assumed by BLAS++/LAPACK++ when using BLAS/LAPACK. Valid values are:
      • lower: function/variable dgemm will be mangled to dgemm,
      • UPPER: function/variable dgemm will be mangled to DGEMM,
      • lower_: function/variable dgemm will be mangled to dgemm_ (default).

    More information can be found in the installation instructions for BLAS++ and LAPACK++.

    Note that BLAS++/LAPACK++ discover BLAS and LAPACK only; ScaLAPACK library is always discovered using the NWChemEx kit.

Also note that all discovery methods respect the following CMake cache variable:

  • BLA_STATIC -- indicates whether static or shared LAPACK and BLAS libraries will be preferred.

Additional platform-specific BLAS/LAPACK notes are listed below.

Intel Math Kernel Library (MKL)

Intel MKL is a freely-available collection of high-performance libraries that implements BLAS, LAPACK, and ScaLAPACK APIs. MKL is complex: it supports both serial kernels as well as parallel kernels that can take advantage of multiple cores via the use of OpenMP and Intel TBB (the Intel OneAPI toolkit provides MKL also capable of execution on some Intel GPUs and FPGAs), and the necessary MKL link options will depend on the compiler, OS, and other details.

To discover and configure the use of Intel MKL consider these suggestions:

  • The use of NWChemEx discovery kit is strongly recommended for discovering Intel MKL. The following CMake cache variables can be used to specify the desired Intel MKL configuration:

    • IntelMKL_PREFERS_STATIC: whether to look for static or shared/dynamic libraries (default = OFF)
    • IntelMKL_THREAD_LAYER: which threading backend to use, supported values are sequential, openmp, and tbb (default = openmp)
    • IntelMKL_OMP_LIBRARY: which thread library to use, supported values are Intel, GNU, and PGI (default depends on the compile)

  • Most common configurations of Intel MKL can also be discovered by BLAS++/LAPACK++ automatically; if needed, specifying BLA_VENDOR with appropriate argument can be used to force TiledArray to use MKL. Unfortunately it is not possible to specify the use of TBB-based backend for MKL without the use of a toolchain file.

  • All MKL-enabled toolchains in The Valeev Group CMake kit can be used to configure TiledArray to use sequential, OpenMP, or TBB backend by setting the MKL_THREADING CMake cache variable to SEQ, OMP, or TBB, respectively. The toolchains also respect the user-provided choice of BLA_STATIC. If multiple MKL versions are present on your system, specify the apropriate variant of the library by loading the corresponding mklvars.sh script to set environment variables MKLROOT and, if necessary, LD_LIBRARY_PATH/DYLD_LIBRARY_PATH.

    On 64-bit platforms it is possible to specify whether to use 32-bit (LP64, the default) or 64-bit (ILP64) integers in BLAS/LAPACK API. To choose the ILP64 interface when using the VG MKL toolchains set CMake cache variable INTEGER4 to OFF; the same is achieved when using the default BLAS/LAPACK detection by setting BLA_VENDOR to one of the valid Intel*64ilp* choices. N.B. Currently ILP64 variant of BLACS/ScaLAPACK is not supported, due to a pending issue.

Also note that even if OpenMP or TBB backends are used, TiledArray will be default set the number of threads to be used by MKL kernels to 1, regardless of the value of environment variables MKL_NUM_THREADS/OMP_NUM_THREADS. It is possible to change the number of threads to be used programmatically in your application by calling MKL function mkl_set_num_threads().

CUDA

Support for execution on CUDA-enabled hardware is controlled by the following variables:

  • ENABLE_CUDA -- Set to ON to turn on CUDA support. [Default=OFF].
  • CMAKE_CUDA_HOST_COMPILER -- Set to the path to the host C++ compiler to be used by CUDA compiler. CUDA compilers used to be notorious for only being able to use specific C++ host compilers, but support for more recent C++ host compilers has improved. The default is determined by the CUDA compiler and the user environment variables (PATH etc.).
  • ENABLE_CUDA_ERROR_CHECK -- Set to ON to turn on assertions for successful completion of calls to CUDA runtime and libraries. [Default=OFF].
  • CUTT_INSTALL_DIR -- the installation prefix of the pre-installed cuTT library. This should not be normally needed; it is strongly recommended to let TiledArray build and install cuTT.
  • UMPIRE_INSTALL_DIR -- the installation prefix of the pre-installed Umpire library. This should not be normally needed; it is strongly recommended to let TiledArray build and install Umpire.

For the CUDA compiler and toolkit to be discoverable the CUDA compiler (nvcc) should be in the PATH environment variable. Refer to the FindCUDAToolkit module for more info.

Eigen 3

You can specify the install location of Eigen 3 with the following CMake cache variable:

  • EIGEN3_INCLUDE_DIR -- The path to the Eigen 3 include directory

If Eigen is not found at the configure time, it will be downloaded from the Bitbucket repository.

Python

To build Python bindings use the following variable:

  • TA_PYTHON -- Set to ON to build Python bindings.

This also requires setting BUILD_SHARED_LIBS to ON.

MADNESS

TiledArray uses a non-release version of MADNESS. Therefore, you should NOT expect the most recent release of MADNESS to work with TiledArray. To ensure you are using the correct version of MADNESS, we recommend allowing CMake to automatically download, configure, and build MADNESS (this is the default behavior). When CMake is configuring TiledArray, it will checkout the correct revision of MADNESS.

The following CMake options may be used to modify build behavior or find MADNESS:

  • ENABLE_MPI -- Enable MPI [Default=ON]
  • ENABLE_SCALAPACK -- Enable the use of ScaLAPACK bindings [Default=OFF]
  • ENABLE_TBB -- Enable the use of TBB when building MADNESS [Default=ON]
  • ENABLE_GPERFTOOLS -- Enable the use of gperftools when building MADNESS [Default=OFF]
  • ENABLE_TCMALLOC_MINIMAL -- Enable the use of gperftool's tcmalloc_minimal library only (the rest of gperftools is skipped) when building MADNESS [Default=OFF]
  • ENABLE_LIBUNWIND -- Force the discovery of libunwind library when building MADNESS [Default=OFF]
  • ENABLE_WFN91_LINALG_DISCOVERY_KIT -- Enable the use of NWChemEx's linear algebra discovery [Default=ON]
  • MADNESS_SOURCE_DIR -- Path to the MADNESS source directory
  • MADNESS_BINARY_DIR -- Path to the MADNESS build directory
  • MADNESS_URL -- Path to the MADNESS repository [Default=MADNESS git repository]
  • MADNESS_TAG -- Revision hash or tag to use when building MADNESS (expert only)
  • MADNESS_CMAKE_EXTRA_ARGS -- Extra flags passed to MADNESS cmake command
  • MADNESS_CMAKE_GENERATOR -- the CMake generator to use for building MADNESS [Default=Generator used to build TiledArray]

The following environment variables can be used to help discovery of MADNESS dependencies:

  • TBBROOT -- the install prefix of TBB
  • GPERFTOOLS_DIR -- the install prefix of gperftools
  • LIBUNWIND_DIR -- the install prefix of libunwind

If you wish to install MADNESS yourself, we recommend downloading the latest version from the MADNESS git repository. You should not expect the latest release version to work correctly with TiledArray. You can specify the install directory with:

  • MADNESS_ROOT_DIR -- MADNESS install directory
  • CMAKE_INSTALL_PREFIX -- Semicolon separated list of directory CMake will use to search for software dependencies.

Advanced configure options:

The following CMake cache variables are tuning parameters. You should only modify these values if you know the values for your patricular system.

  • VECTOR_ALIGNMENT -- The alignment of memory for Tensor in bytes [Default=16]
  • CACHE_LINE_SIZE -- The cache line size in bytes [Default=64]

VECTOR_ALIGNMENT controls the alignment of Tensor data, and CACHE_LINE_SIZE controls the size of automatic loop unrolling for tensor operations. TiledArray does not currently use explicit vector instructions (i.e. intrinsics), but the code is written in such a way that compilers can more easily autovectorize the operations when supported. In a future version, explicit vectorization support may be added.

Expert configure options:

  • TA_EXPERT -- Set to ON to disable automatic installation of prerequisites. Useful for experts, hence the name. [Default=OFF].
  • TA_ASSERT_POLICY -- Set to TA_ASSERT_IGNORE to disable TA_ASSERT assertions, TA_ASSERT_THROW to cause TA_ASSERT assertions to throw, TA_ASSERT_ABORT to cause TA_ASSERT assertions to abort. The default is TA_ASSERT_IGNORE if CMake uses a single-configuration generator andCMAKE_BUILD_TYPE is set to Release or MinSizeRel, else the default is TA_ASSERT_THROW.
  • BUILD_TESTING -- Set of OFF to disable building unit tests. The default is ON.
  • TA_TRACE_TASKS -- Set to ON to enable tracing of MADNESS tasks using custom task tracer. Note that standard profilers/tracers are generally useless (except in the trivial cases) with MADWorld-based programs since the submission context of tasks is not captured by standard tracing tools; this makes it impossible in a nontrivial program to attribute tasks to source code. WARNING: task tracing his will greatly increase the memory requirements. [Default=OFF].
  • TA_ENABLE_RANGEV3 -- Set to ON to find or fetch the Range-V3 library and enable additional tests of TA components with constructs anticipated to be supported in the future. [Default=OFF].
  • TA_SIGNED_1INDEX_TYPE -- Set to OFF to use unsigned 1-index coordinate type (default for TiledArray 1.0.0-alpha.2 and older). The default is ON, which enables the use of negative indices in coordinates.
  • TA_MAX_SOO_RANK_METADATA -- Specifies the maximum rank for which to use Small Object Optimization (hence, avoid the use of the heap) for metadata. The default is 8.
  • TA_TENSOR_MEM_PROFILE -- Set to ON to profile memory allocations in TA::Tensor.
  • TA_UT_CTEST_TIMEOUT -- The value (in seconds) of the timeout to use for running the TA unit tests via CTest when building the check/check-tiledarray targets. The default timeout is 1500s.

Build TiledArray

    $ cmake --build .
    (optional) $ cmake --build . --target check
    $ cmake --build . --target install