lmfigs.sty

% This file contains code for handling figures that can be used not
% just by LM but also by SN and DP.
%
%-------------------- minipagefullpagewidth -------------------
%  if using p{...} stuff, make sure the widths add up to about 162 mm
% bugs:
% - if the widths of the columns don't add up to the right amount, you can get gaps in the rules
% A lot of the ifrightifleft environment's logic has to be duplicated in \margdown -- if changing it here,
% change it there as well. This has to be implemented as an environment, so that the label occurs at the
% end; otherwise it messes up if it's the first thing on the page, because the label's page number refers
% to the previous page.
\newcounter{ifrightifleftctr}% only purpose is to distinguish the labels from one another
\setcounter{ifrightifleftctr}{0}
\newenvironment{ifrightifleft}[2]{%
    \stepcounter{ifrightifleftctr}%
    \ifthenelse{\isodd{\pageref{ifrightifleft\theifrightifleftctr}}}{#1}{#2}%
}{%
    \label{ifrightifleft\theifrightifleftctr}%
}
\newenvironment{minipagefullpagewidth}%
  {%
    \begin{ifrightifleft}{}{\hspace{-\marginfigoverhang}}%
    \begin{minipage}{\pagewidth}
  }%
  {%
    \end{minipage}
    \end{ifrightifleft}
  }
%-------------------- figure preferences -------------------
% The following three numbers are to make TeX more likely to put figures on the
% same page rather than on a separate figures page. Can tinker with these, but
% make sure floatpagefraction<topfraction.
% Values recommended by the web page I found were 0.85, 0.1, 0.75
\renewcommand{\topfraction}{0.99}
\renewcommand{\textfraction}{0.01}
\renewcommand{\floatpagefraction}{0.98}
%
\newcommand{\mypart}[1]{\part{#1}}
%-------------------- my figure commands -------------------
% For an example of how to do a figure containing LaTeX text, see fig:hmassratios
% in chapter 8.
%
% Force it to start figure numbering afresh with each chapter:
  \newcommand{\zapcounters}{\setcounter{figctr}{0}}
% The following is complicated, because I want to be able to have chapter opener pictures that appear before the
% chapter's title:
  \newcommand{\mychaptercmdsa}{%
           \renewcommand\cleardoublepage{}%
	   \clearpage
	   \ifodd\c@page
           \else
		  \hbox{}\newpage
           \fi
           \zapcounters
  }
  \newcommand{\mychaptercmdsb}{%
           \thispagestyle{fancy}\myeqnspacing\normalfont\normalsize%
  }
  \newcommand{\mychapter}[3]{\mychaptercmdsa\chapter[#1]{#3}\mychaptercmdsb}
       %...ignore #2 because only memoir supports it
  \newcommand{\mychapterwithopener}[3]{%
         \mychaptercmdsa%
         \noindent\widefignocaptionnofloat{#1}%
         {\formatlikecaption{#2}}%
         \par\chapter{#3}%
         \mychaptercmdsb%
         
  }
  \newcommand{\mychapterwithopenersidecaption}[3]{%
         \mychaptercmdsa%
         \noindent\widefigsidecaption{b}{#1}{#2}{labeled}{h}{nofloat}{}{\figprefix\chapdir/figs}%
         \par\chapter{#3}%
         \mychaptercmdsb%
         \addtocounter{figctr}{1}% I don't understand why this is necessary, since it should get zeroed by mychaptercmdsa, which is before the figure.
  }
  \newcommand{\mychapterwithopenersidecaptionanon}[3]{%
         \mychaptercmdsa%
         \noindent\widefigsidecaption{b}{#1}{#2}{anonymous}{h}{nofloat}{}{\figprefix\chapdir/figs}%
         \par\chapter{#3}%
         \mychaptercmdsb%
  }
  \newcommand{\mychapterwithnarrowopenerwidecaption}[3]{%
         \mychaptercmdsa%
         \noindent\narrowfigwidecaptionanon{#1}{#2}%
         \par\chapter{#3}%
         \mychaptercmdsb%
  }
  \newcommand{\specialchapterwithopener}[4]{% used in CL, ch. 4, so pool ball hangs off edge, #1=width, #2=figure, #3=caption, #4=title of chapter
         \mychaptercmdsa%
         \noindent\widefigspecial{#1}{#2}%
         {\formatlikecaption{#3}}%
         \par\chapter{#4}%
         \mychaptercmdsb%
  }
  \newcommand{\mychapterwithfullpagewidthopener}[3]{%
         \mychaptercmdsa%
         \noindent%
         \begin{minipagefullpagewidth}%
           \includegraphics[width=\textwidth]{\figprefix\chapdir/figs/#1}\\
           \formatlikecaption{#2}%
         \end{minipagefullpagewidth}%
         \label{fig:#1}%
         \par\chapter{#3}%
         \mychaptercmdsb%
  }
  \newcommand{\mychapterwithfullpagewidthopenernocaption}[2]{%
         \mychaptercmdsa%
         \noindent%
         \begin{minipagefullpagewidth}%
           \includegraphics[width=\textwidth]{\figprefix\chapdir/figs/#1}
         \end{minipagefullpagewidth}%
         \label{fig:#1}%
         \par\chapter{#2}%
         \mychaptercmdsb%
  }
  \newcommand{\mychapterwithopenernocaption}[2]{%
         \mychaptercmdsa%
         \noindent\widefignocaptionnofloat{#1}%
         \par\chapter{#2}%
%        The following was what I had in DP instead of the line above. It caused
%        an error in LM...?
%         \par\vfill\hspace{-9mm}\noindent\chapter{#2}%
         \mychaptercmdsb%
  }
% Letters for figure number, and no "Figure .." in caption:
  \newcommand{\hwcaptions}{\def\figurelabel{}}
  \newcommand{\normalcaptions}{\def\figurelabel{\thefigctr\hspace{1mm}{\scriptsize{/}}\hspace{1mm}}}
  \normalcaptions
%
\newcommand{\marg}[1]{\margdown{0mm}{#1}}
% The \figinindentedcorr length is to fix a problem where marginal figures are offset when used inside an indented
% block of text, such as an example. The eg environment changes this length to a nonzero value at the beginning, and
% then resets it to zero at the end. Problem:
%     A figure above(?) or below(?) an eg doesn't benefit from the correction, but gets affected by the neighboring eg.
%     One solution is to place the figure inside the eg instead. However, don't place it immediately before the
%     first paragraph of the example, because that introduces extra vertical space.
\newlength{\figinindentedcorr}
\setlength{\figinindentedcorr}{0mm}
\newcommand{\indentedcorrend}{\setlength{\figinindentedcorr}{0mm}}
\newcommand{\indentedcorrstart}{\setlength{\figinindentedcorr}{\egindent}}
% For reasons I don't understand, it's also necessary to put in a roughly 2-mm correction to the positions of
% stuff on left-hand pages. To handle this, the margdown macro duplicates a lot of logic from the
% ifrightifleft environment; tried using that env. here, but that breaks wrapfigure.
% When the figure is the very first thing on a right-hand page, the ifrightifleft logic seems to mess
% up. Solution: never make a figure the very first thing on a page.
% If a left-hand figure is too close to the text by a couple of mm, the problem is that the odd/even logic
% is messed up, possibly because it's the first figure on the page. May need to recompile book from scratch
% to fix it, even after moving fig?
\newlength{\fixwrapfigweirdness}
\newcommand{\margdown}[2]{%
        \stepcounter{ifrightifleftctr}%
        \ifthenelse{\isodd{\pageref{ifrightifleft\theifrightifleftctr}}}{\setlength{\fixwrapfigweirdness}{0mm}}{\setlength{\fixwrapfigweirdness}{-2.9mm}}%
                           % ... for reasons I don't understand, this correction gets scaled down by about a factor of 2.
        \addtolength{\fixwrapfigweirdness}{-\figinindentedcorr}%
                           %set to a nonzero value by eg
                           % environment; examples: CL, pp. 76 (ion drive), 111 (colliding asteroids)
	\begin{wrapfigure}{o}[\marginfigoverhang]{0mm}%
                \makebox[\marginfigwidth][l]{%
                    \hspace{\fixwrapfigweirdness}%
		    \begin{minipage}{\marginfigwidth}
			\vspace*{#1}
			#2
		    \end{minipage}%
                }%
	\end{wrapfigure}%
        \label{ifrightifleft\theifrightifleftctr}%
}
\newcommand{\formatlikecaption}[1]{%
	\small{\protect\sansmath\sf{#1}\lmserifmath} %
}
\newcommand{\docaptionnorefstep}[2][l]{%
	\break%
        \ifthenelse{\equal{#1}{r}}{\hspace*{\fill}}{}
        \formatlikecaption{\figurelabel#2}%
        \hfill%
}
\newcommand{\docaption}[1]{%
        \refstepcounter{figctr}%
        \docaptionnorefstep{#1}%
}
% In the following, the optional first argument is appended to the end of
% the label. This is necessary sometimes if I'm including the same figure
% more than once and want to have separate labels.
% This logic is not just simpler than ifrightifleft, it's more reliable, because
% the label is really attached to the figure itself, not the place from which
% it was created in the text.
\newcommand{\fullpagewidthfig}[3][\figprefix\chapdir/figs]{%
    % #1 = directory (optional)
    % #2 = name
    % #3 = caption
  \ifthenelse{\isodd{\pageref{fig:#2}}}{%
    \fullpagewidthfigx{#2}{#3}{0mm}{fig}{#1}
  }{%
    \fullpagewidthfigx{#2}{#3}{-\marginfigoverhang}{fig}{#1}
  }%
}
\newcommand{\fullpagewidthfignocaption}[2][\figprefix\chapdir/figs]{%
    % #1 = directory (optional)
    % #2 = name
  \ifthenelse{\isodd{\pageref{fig:#2}}}{%
    \fullpagewidthfigx{#2}{}{0mm}{fig}{#1}
  }{%
    \fullpagewidthfigx{#2}{}{-\marginfigoverhang}{fig}{#1}
  }%
}
\newcommand{\fullpagewidthfigx}[5]{ %
  \begin{figure}[h]
    \hspace{#3}%
    \begin{minipage}{\pagewidth}
      \includegraphics[width=\pagewidth]{#5/#1}
      \ifthenelse{\equal{#2}{}}{}{\linebreak[4]\docaption{#2}}
      \label{#4:#1} %
    \end{minipage}%
  \end{figure}
}
\immediate\write18{rm -f ch*.pos}%The \immediate is necessary, because otherwise it deletes it after it's been written.
\newcommand{\recordpos}[2]{\pdfsavepos\write18{echo "fig,label=#1,page=\thepage,x=\the\pdflastxpos,y=\the\pdflastypos,at=#2" >>all.pos}}
% .... This is called from commands like \fig, etc.
\newenvironment{margin}[3]{%
  % #1 = figure number
  % #2 = delta-y (in mm, positive=up)
  % #3 = chapter (so we can figure out which data file to write to)
  \pdfsavepos\write18{echo "#1,page=\thepage,refx=\the\pdflastxpos,refy=\the\pdflastypos,deltay=#2" >>figfeedback#3}
}{%
}
% For the sake of consistency, try not to use anonymousfig in general. However, there's no harm in
% using it for discussion question figures, where a caption like ``i / Discussion question A'' looks
% goofy anyway.
\newcommand{\fig}[4]{ %
          % #1 = name
          % #2 = caption
          % #3 = suffix
          % #4 = directory
        \figx{#1}{#2}{#3}{#4}{labeled}%
}
\newcommand{\anonymousfig}[3]{%
          % #1 = name
          % #2 = caption
          % #3 = directory
        \figx{#1}{#2}{}{#3}{anonymous}%
}
\newcommand{\figx}[5]{ %
          % #1 = name
          % #2 = caption
          % #3 = suffix
          % #4 = directory
          % #5 = anonymous or labeled
        \recordpos{fig:#1#3}{begin}\break    % The break is important!!! Without it, we end up recording the height of the *bottom* of the graphic!!
	\includegraphics[width=\marginfigwidth]{#4/#1}%
        \recordpos{fig:#1#3}{endgraphic}%
        % The use of the minipage environment in the folowing looks useless, but it isn't! In most cases, the surrounding textpos
        % environment's width forces the caption to be the right width, and everything is OK. However, there are some cases
        % (CL5, starting at 5.3 and ending when CL6 starts) where the stuff inside the figure is inexplicably typeset at the full 113mm
        % text with unless I put in this minipage. The sloppypar is because fussy mode doesn't really work for such a narrow column of text.
        \begin{sloppypar}\noindent\begin{minipage}{\marginfigwidth}\noindent%
        \ifthenelse{\equal{#5}{labeled}}{%
          \docaption{#2}%
        }{%
          \break\formatlikecaption{#2}\hfill%
        }%
        \label{fig:#1#3}% Should be labeled regardless of whether it's anonymous; e.g., might need to refer to it in photo credits.
        \end{minipage}\end{sloppypar}%
        \recordpos{fig:#1#3}{endcaption}%
}
% The following is for figures that exist in translated versions. The \figprefix is omitted.
\newcommand{\trfig}[3][]{ %
        \fig{#2}{#3}{#1}{translated}
}
% Note that for textfigs, there's no reason to have a provision for suffixes, since there's
% no external graphics file that might be reused.
\newcommand{\starttextfig}[1]{%
          % #1 = name
        \recordpos{fig:#1}{begintextfig}\break% Without the break, we record the height at the middle of the table, not the top.
}
\newcommand{\finishtextfig}[2]{%
          % #1 = name
          % #2 = caption
	\break\noindent\docaption{%
          #2%
          \recordpos{fig:#1}{endtextfig}%
        } %
	\label{fig:#1} %
}
\newcommand{\starttextbox}[1]{%
          % #1 = name
        \recordpos{fig:#1}{begintextfig}\break% Without the break, we record the height at the middle of the table, not the top.
}
\newcommand{\textboxbody}[2]{
          % #1 = title
          % #2 = text
        \noindent%
        \refstepcounter{textboxctr}
        \begin{shaded}
          \noindent \ensuremath{\triangleright} Box \thetextboxctr \quad \textbf{#1}\\
          #2
        \end{shaded}
}
\newcommand{\finishtextbox}[1]{%
          % #1 = name
	\break\recordpos{fig:#1}{endtextfig}\label{fig:#1}\label{textbox:#1}\normalfont\normalsize
}
\newcommand{\figref}[1]{\formatfigref{\ref{fig:#1}}}
\newcommand{\subfigref}[2]{\figref{#1}/#2}
\newcommand{\fignocaption}[2]{%
        \recordpos{fig:#1}{begin}
	\includegraphics[width=\marginfigwidth]{#2/#1} %
        \recordpos{fig:#1}{endgraphic}%
	\label{fig:#1} %
}
\newcommand{\fignoresize}[2]{ %
	\includegraphics{\figprefix\chapdir/figs/#1} %
	\docaption{#2} %
	\label{fig:#1} %
}
\newcommand{\widefig}[6][h]{ %
         % #1 -- float location
         % #2 -- file
         % #3 -- caption
         % #4 -- suffix
         % #5 -- labeled or anonymous
         % #6 -- directory
	\spaceabovewidefig
	\begin{figure}[#1]
        \recordpos{fig:#2#4}{begin}
	\includegraphics[width=\textwidth]{#6/#2} %
        \recordpos{fig:#2#4}{endgraphic}
        \ifthenelse{\equal{#5}{labeled}}{%
          \docaption{#3}%
          \recordpos{fig:#2#4}{endcaption}
        }{%
          \formatlikecaption{#3}%
          \recordpos{fig:#2#4}{endcaption}
        }%
	\label{fig:#2#4} %
	\end{figure}
}
\newcommand{\widefigspecial}[3][\figprefix\chapdir/figs]{ %
          % #1 = directory (optional)
          % #2 = width
          % #3 = file
	\spaceabovewidefig
	\includegraphics[width=#2]{#1/#3} %
	\label{fig:#3} %
}
\newcommand{\widefignocaptionnofloat}[2][\figprefix\chapdir/figs]{ %
           % #1 = directory (optional)
           % #2 = file
        \noindent\widefigspecial[#1]{\textwidth}{#2}%
}
\newcommand{\inlinefignocaption}[1]{ %
	\spaceabovewidefig
	\includegraphics[width=\textwidth]{\figprefix\chapdir/figs/#1}\label{fig:#1}
}
\newcommand{\inlinefignocaptionnoresize}[1]{ %
	\spaceabovewidefig
	\includegraphics{\figprefix\chapdir/figs/#1}\label{fig:#1}
}
\newsavebox{\sidecaptionbox}
\newsavebox{\includegraphicsbox}
\newlength{\xmarginscoot}
\newlength{\ymarginscoot}
\newlength{\kludge}
\newlength{\oddsidemarginscoot}
\setlength{\oddsidemarginscoot}{\textwidth}
\addtolength{\oddsidemarginscoot}{\marginparsep}
\addtolength{\oddsidemarginscoot}{\mysteriousextracolsep}
\newlength{\evensidemarginscoot}
\setlength{\evensidemarginscoot}{\marginfigwidth}
\addtolength{\evensidemarginscoot}{\marginparsep}
\addtolength{\evensidemarginscoot}{\mysteriousextracolsep}
\newlength{\adjustevensidemargin}
\setlength{\adjustevensidemargin}{-3.5mm}
\addtolength{\evensidemarginscoot}{\adjustevensidemargin}
 % ...This is necessary in order to make it line up with margin figs, which are actually too close
 % to the text for some mysterious reason.
% ---------- side captions ------------
% The side caption stuff is really evil -- seemingly inconsequential modifications to the code can
% have unexpected effects. When making a change to this code, make sure to test as many cases and
% combinations of cases as possible:
%   t, c, and b
%   odd and even pages
%   labeled or anonymous
%   test bar cartoon fig in NP5 -- at end of page, caption tended to get pushed to next page
%   captions less than 52 mm wide, versus ones that fill the whole margin's width
% There are also some constants hardcoded below that should really be computed.
% (The ones that *are* computed only apply to the older code that's if'ed out.)
% -------------------------------------
\newcommand{\widefigsidecaption}[8]{%
        % not to be called directly
                  % #1 = t to align top of caption with top of figure, c to align centers, b for bottoms
                  % #2 = name of graphic
                  % #3 = caption
                  % #4 = labeled or anonymous
                  % #5 = standard latex positioning stuff, h, t, b
                  % #6 = float or nofloat
                  % #7 = suffix
                  % #8 = directory (would normally be \figprefix\chapdir/figs )
  \ifthenelse{\equal{#6}{float}}{\begin{figure}[#5]}{}%
      % If I don't enclose it in this, and make it floating, then it becomes impossible to get the page reference right reliably.
	\begin{lrbox}{\includegraphicsbox}\begin{minipage}{\textwidth}\includegraphics[width=\textwidth]{#8/#2}\end{minipage}\end{lrbox}%
        \refstepcounter{figctr}
        % Note that although it would seem logical to put this code inside the first clause of the following ifthenelse, in fact that
        % causes strange errors (later figures get same caption as earlier ones).
        \begin{lrbox}{\sidecaptionbox}\begin{minipage}{\marginfigwidth}%
          \ifthenelse{\equal{#4}{labeled}}{%
            \docaptionnorefstep{#3}%
          }{%
            \formatlikecaption{#3}
          }
        \end{minipage}\end{lrbox}%
	\ifthenelse{\isodd{\pageref{fig:#2#7}}}{%
          \setlength{\xmarginscoot}{\oddsidemarginscoot}
        }%
        {% even, left-hand page
          \setlength{\xmarginscoot}{-\evensidemarginscoot}
	  \settowidth{\kludge}{\formatlikecaption{#3}}
          \ifthenelse{\lengthtest{\kludge < \marginfigwidth}}{
	    \begin{lrbox}{\sidecaptionbox}\begin{minipage}{\marginfigwidth}%
              \ifthenelse{\equal{#4}{labeled}}{%
                \docaptionnorefstep[r]{#3}%
              }{%
                \formatlikecaption{#3}
              }
            \end{minipage}\end{lrbox}%
          }{}
          \addtolength{\xmarginscoot}{-4mm}% empirical
        }
        \ifthenelse{\equal{#1}{t}}{
          \settoheight{\ymarginscoot}{\usebox{\includegraphicsbox}}
          \settodepth{\kludge}{\usebox{\includegraphicsbox}}
	  \addtolength{\ymarginscoot}{\kludge}
          \settoheight{\kludge}{\usebox{\sidecaptionbox}}
	  \addtolength{\ymarginscoot}{-\kludge}
        }{}
        \ifthenelse{\equal{#1}{b}}{
          \settodepth{\ymarginscoot}{\usebox{\sidecaptionbox}}
        }{}
        \ifthenelse{\equal{#1}{c}}{
          \settodepth{\ymarginscoot}{\usebox{\includegraphicsbox}}
        }{}
        \par
	\label{fig:#2#7} % need to make sure this lies on same page as fig, otherwise parity is wrong
        \ifthenelse{\equal{1}{0}}{
          % old code, sometimes causes caption to go onto next page (as in NP5, bar cartoon)
          \noindent\usebox{\includegraphicsbox}
          \raisebox{\ymarginscoot}[0mm][0mm]{\makebox[0mm][l]{\hspace{\xmarginscoot}\usebox{\sidecaptionbox}}}
        }{%
          \settodepth{\kludge}{\usebox{\includegraphicsbox}}
          \addtolength{\ymarginscoot}{-\kludge}
          \ifthenelse{\isodd{\pageref{fig:#2#7}}}{%
            % odd, right-hand page
            \noindent\usebox{\includegraphicsbox}%
            \makebox[\marginparsep][l]{}%
            \makebox[3.5mm][l]{}% why??
            \raisebox{\ymarginscoot}[0mm][0mm]{\makebox[0mm][l]{\usebox{\sidecaptionbox}}}
          }%
          {%
            % even, left-hand page
            \noindent\usebox{\includegraphicsbox}%
            \makebox[\marginparsep][l]{}%
            \makebox[4mm][l]{}% why??
            \raisebox{\ymarginscoot}[0mm][0mm]{\makebox[0mm][l]{\hspace{-184mm}\usebox{\sidecaptionbox}}}
          }
        }%
  \ifthenelse{\equal{#6}{float}}{\end{figure}}{}%
}
% I only use this in a few places (NP, and EM, near pp. 92, 152), and the layouts in those places are tightly defined, so
% I don't want this to be floating. However, making it a floating figure was the only way I was ever able to figure out
% to get widefigsidecaption to figure out reliably when it was on a left or right page, so this is inherently unreliable.
\newcommand{\narrowfigwidecaptionnofloat}[4][t]{%
                  % #1 = t to align top of caption with top of figure, c to align centers, b for bottoms
                  % #2 = name of graphic
                  % #3 = caption
                  % #4 = directory
        \vspace{2mm}\narrowfigwidecaptionanon[#1]{#2}{\docaptionnorefstep{#3}}{#4}
}
%
\newcommand{\narrowfigwidecaptionanon}[4][t]{%
                  % See comments under narrowfigwidecaption
	\spaceabovewidefig
	\begin{lrbox}{\includegraphicsbox}\begin{minipage}{\marginfigwidth}\includegraphics[width=\marginfigwidth]{#4/#2}\end{minipage}\end{lrbox}%
        \refstepcounter{figctr}
	\begin{lrbox}{\sidecaptionbox}\begin{minipage}{\textwidth}\formatlikecaption{#3}\end{minipage}\end{lrbox}%
	\ifthenelse{\isodd{\pageref{fig:#2}}}{%
          \setlength{\xmarginscoot}{\oddsidemarginscoot}
        }%
        {% even, left-hand page
          \setlength{\xmarginscoot}{-\evensidemarginscoot}
	  \settowidth{\kludge}{\formatlikecaption{#3}}
          \ifthenelse{\lengthtest{\kludge < \textwidth}}{
	    \begin{lrbox}{\sidecaptionbox}\begin{minipage}{\textwidth}\formatlikecaption{#3}\end{minipage}\end{lrbox}%
          }{}
          \addtolength{\xmarginscoot}{-4mm}% empirical
        }
        \ifthenelse{\equal{#1}{t}}{
          \settoheight{\ymarginscoot}{\usebox{\sidecaptionbox}}
          \settodepth{\kludge}{\usebox{\sidecaptionbox}}
	  \addtolength{\ymarginscoot}{\kludge}
          \settoheight{\kludge}{\usebox{\includegraphicsbox}}
	  \addtolength{\ymarginscoot}{-\kludge}
        }{}
        \ifthenelse{\equal{#1}{b}}{
          \settodepth{\ymarginscoot}{\usebox{\includegraphicsbox}}
        }{}
        \ifthenelse{\equal{#1}{c}}{
          \settodepth{\ymarginscoot}{\usebox{\sidecaptionbox}}
        }{}
        \par
	\noindent\usebox{\sidecaptionbox}
        \raisebox{\ymarginscoot}[0mm][0mm]{\makebox[0mm][l]{\hspace{\xmarginscoot}\usebox{\includegraphicsbox}}}
        \par
	\label{fig:#2} %
}
\newcommand{\anonymousinlinefig}[1]{\includegraphics{\figprefix\chapdir/figs/#1}}
\newlength{\toccolumnwidth}
\setlength{\toccolumnwidth}{77mm}%kludge -- shouldn't hardcode this
%
% Adding decorative figures in table of contents:
\newcommand{\tocdir}{ch00}
\newcommand{\figureintoc}[1]{\par\includegraphics[width=\toccolumnwidth]{\figprefix\tocdir/figs/#1}\par}
% ...To use this:   \addtocontents{toc}{\protect\figureintoc{myfig}}
\newcommand{\figureintocnoresize}[1]{\par\includegraphics{\figprefix\tocdir/figs/#1}\par}
% ...only needed if you want the figure to hang over the edge
\newcommand{\figureintocscootx}[2]{\par\hspace{#2}\includegraphics[width=\toccolumnwidth]{\figprefix\tocdir/figs/#1}\par}
% ...used if you want to put a figure in the middle of a chapter in the toc, as in VW, where the surfer is
%    in the middle of ch. 3; this is because the toc package is enforcing indentation at this point
\newcommand{\figureintocscooty}[2]{\par\vspace{#2}\includegraphics[width=\toccolumnwidth]{\figprefix\tocdir/figs/#1}\par}
% ...used at the end of VW's toc, to make the galaxy come out flush at the bottom
%
\newcommand{\spacebetweenfigs}{
	\vspace{6mm}
}
\newcommand{\smspacebetweenfigs}{
	\vspace{2mm}
}
\newcommand{\spaceabovewidefig}{\vspace{1mm}}