Skip to content

Latest commit

 

History

History
242 lines (162 loc) · 9.7 KB

README.md

File metadata and controls

242 lines (162 loc) · 9.7 KB
Raw

heaptrack - a heap memory profiler for Linux

heaptrack_gui summary page

Heaptrack traces all memory allocations and annotates these events with stack traces. Dedicated analysis tools then allow you to interpret the heap memory profile to:

  • find hotspots that need to be optimized to reduce the memory footprint of your application
  • find memory leaks, i.e. locations that allocate memory which is never deallocated
  • find allocation hotspots, i.e. code locations that trigger a lot of memory allocation calls
  • find temporary allocations, which are allocations that are directly followed by their deallocation

Using heaptrack

The recommended way is to launch your application and start tracing from the beginning:

heaptrack <your application and its parameters>

heaptrack output will be written to "/tmp/heaptrack.APP.PID.gz"
starting application, this might take some time...

...

heaptrack stats:
    allocations:            65
    leaked allocations:     60
    temporary allocations:  1

Heaptrack finished! Now run the following to investigate the data:

    heaptrack_gui "/tmp/heaptrack.APP.PID.gz"

Alternatively, you can attach to an already running process:

heaptrack --pid $(pidof <your application>)

heaptrack output will be written to "/tmp/heaptrack.APP.PID.gz"
injecting heaptrack into application via GDB, this might take some time...
injection finished

...

Heaptrack finished! Now run the following to investigate the data:

    heaptrack_gui "/tmp/heaptrack.APP.PID.gz"

Building heaptrack

Heaptrack is split into two parts: The data collector, i.e. heaptrack itself, and the analyzer GUI called heaptrack_gui. The following summarizes the dependencies for these two parts as they can be build independently. You will find corresponding development packages on all major distributions for these dependencies.

On an embedded device or older Linux distribution, you will only want to build heaptrack. The data can then be analyzed on a different machine with a more modern Linux distribution that has access to the required GUI dependencies.

If you need help with building, deploying or using heaptrack, you can contact KDAB for commercial support: https://www.kdab.com/software-services/workshops/profiling-workshops/

Shared dependencies

Both parts require the following tools and libraries:

  • cmake 2.8.9 or higher
  • a C++11 enabled compiler like g++ or clang++
  • zlib
  • optionally: zstd for faster (de)compression
  • libdl
  • pthread
  • libc

heaptrack dependencies

The heaptrack data collector and the simplistic heaptrack_print analyzer depend on the following libraries:

  • boost 1.41 or higher: iostreams, program_options
  • libunwind
  • elfutils: libdwarf

For runtime-attaching, you will need gdb installed.

heaptrack_gui dependencies

The graphical user interface to interpret and analyze the data collected by heaptrack depends on Qt 5 and some KDE libraries:

  • extra-cmake-modules
  • Qt 5.2 or higher: Core, Widgets
  • KDE Frameworks 5: CoreAddons, I18n, ItemModels, ThreadWeaver, ConfigWidgets, KIO

When any of these dependencies is missing, heaptrack_gui will not be build. Optionally, install the following dependencies to get additional features in the GUI:

  • KDiagram: KChart (for chart visualizations)

Compiling

Run the following commands to compile heaptrack. Do pay attention to the output of the CMake command, as it will tell you about missing dependencies!

cd heaptrack # i.e. the source folder
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release .. # look for messages about missing dependencies!
make -j$(nproc)

Compile heaptrack_gui on macOS using homebrew

heaptrack_print and heaptrack_gui can be built on platforms other than Linux, using the dependencies mentioned above. On macOS the dependencies can be installed easily using homebrew and the KDE homebrew tap.

# prepare tap
brew tap kde-mac/kde
"$(brew --repo)/Library/Taps/kde-mac/homebrew-kde/tools/all-fixes.sh"

# install dependencies
brew install kde-mac/kde/kf5-extra-cmake-modules kde-mac/kde/kf5-kcoreaddons kde-mac/kde/kf5-ki18n \
             kde-mac/kde/kf5-kitemmodels kde-mac/kde/kf5-threadweaver kde-mac/kde/kf5-kconfigwidgets \
             kde-mac/kde/kf5-kio kde-mac/kde/kdiagram \
             boost zstd gettext

# run manual steps as printed by brew
ln -sfv "$(brew --prefix)/share/kf5" "$HOME/Library/Application Support"
ln -sfv "$(brew --prefix)/share/knotifications5" "$HOME/Library/Application Support"
ln -sfv "$(brew --prefix)/share/kservices5" "$HOME/Library/Application Support"
ln -sfv "$(brew --prefix)/share/kservicetypes5" "$HOME/Library/Application Support"

To compile make sure to use Qt from homebrew and to have gettext in the path:

cd heaptrack # i.e. the source folder
mkdir build
cd build
CMAKE_PREFIX_PATH=/usr/local/opt/qt PATH=$PATH:/usr/local/opt/gettext/bin cmake ..
cmake -DCMAKE_BUILD_TYPE=Release .. # look for messages about missing dependencies!
make heaptrack_gui heaptrack_print

Interpreting the heap profile

Heaptrack generates data files that are impossible to analyze for a human. Instead, you need to use either heaptrack_print or heaptrack_gui to interpret the results.

heaptrack_gui

heaptrack_gui flamegraph page

heaptrack_gui allocations chart page

The highly recommended way to analyze a heap profile is by using the heaptrack_gui tool. It depends on Qt 5 and KF 5 to graphically visualize the recorded data. It features:

  • a summary page of the data
  • bottom-up and top-down tree views of the code locations that allocated memory with their aggregated cost and stack traces
  • flame graph visualization
  • graphs of allocation costs over time

heaptrack_print

The heaptrack_print tool is a command line application with minimal dependencies. It takes the heap profile, analyzes it, and prints the results in ASCII format to the command line.

In its most simple form, you can use it like this:

heaptrack_print heaptrack.APP.PID.gz | less

By default, the report will contain three sections:

MOST CALLS TO ALLOCATION FUNCTIONS
PEAK MEMORY CONSUMERS
MOST TEMPORARY ALLOCATIONS

Each section then lists the top ten hotspots, i.e. code locations that triggered e.g. the most memory allocations.

Have a look at heaptrack_print --help for changing the output format and other options.

Note that you can use this tool to convert a heaptrack data file to the Massif data format. You can generate a collapsed stack report for consumption by flamegraph.pl.

Comparison to Valgrind's massif

The idea to build heaptrack was born out of the pain in working with Valgrind's massif. Valgrind comes with a huge overhead in both memory and time, which sometimes prevent you from running it on larger real-world applications. Most of what Valgrind does is not needed for a simple heap profiler.

Advantages of heaptrack over massif

  • speed and memory overhead

    Multi-threaded applications are not serialized when you trace them with heaptrack and even for single-threaded applications the overhead in both time and memory is significantly lower. Most notably, you only pay a price when you allocate memory -- time-intensive CPU calculations are not slowed down at all, contrary to what happens in Valgrind.

  • more data

    Valgrind's massif aggregates data before writing the report. This step loses a lot of useful information. Most notably, you are not longer able to find out how often memory was allocated, or where temporary allocations are triggered. Heaptrack does not aggregate the data until you interpret it, which allows for more useful insights into your allocation patterns.

Advantages of massif over heaptrack

  • ability to profile page allocations as heap

    This allows you to heap-profile applications that use pool allocators that circumvent malloc & friends. Heaptrack can in principle also profile such applications, but it requires code changes to annotate the memory pool implementation.

  • ability to profile stack allocations

    This is inherently impossible to implement efficiently in heaptrack as far as I know.

Contributing to heaptrack

As a FOSS project, we welcome contributions of any form. You can help improve the project by:

When submitting bug reports, you can anonymize your data with the tools/anonymize script:

tools/anonymize heaptrack.APP.PID.gz heaptrack.bug_report_data.gz

Known bugs and limitations

Issues with old gold linker

Libunwind may produce bogus backtraces when unwinding from code linked with old versions of the gold linker. In such cases, recording with heaptrack seems to work and produces data files. But parsing these data files with heaptrack_gui will often lead to out-of-memory crashes. Looking at the data with heaptrack_print, one will see garbage backtraces that are completely broken.

If you encounter such issues, try to relink your application and also libunwind with ld.bfd instead of ld.gold. You can see if you are affected by running the libunwind unit tests via make check. But do note that you need to relink your application too, not only libunwind.