Protonwire - Docker Wireguard Client for ProtonVPN

Features

LAN, private and CGNAT networks remain accessible and are not routed over VPN. No special configuration required.
Supports systemd integration when running via podman
Supports roaming clients

Container Images

Warning

gVisor and cgroup v1 are NOT supported!

Images are published at ghcr.io/tprasadtp/protonwire.

Linux Kernel Requirements

Important

If running as a container, Wireguard MUST be installed on the host, not the container.

If using Debian 11 (Buster) or later, Raspberry Pi OS (Buster) or later, Fedora, ArchLinux, Linux Mint 20.x or later, RHEL 9 or later, Alma Linux 9 or later, CentOS 9 Stream, Ubuntu 20.04 or later have the required kernel module built-in.
Kernel versions 5.6 or later.
If NONE of the above conditions can be satisfied, install WireGuard. Your distribution might already package DKMS module or provide signed kernels with WireGuard built-in. Visit https://www.wireguard.com/install/ for more info.
To check current kernel version run,
```
uname -r
```

Generating WireGuard Private Key

Important

It is recommended to use unique private key for each instance of the the VPN container.

Log in to ProtonVPN and go to Downloads → WireGuard configuration.
Enter a name for the key, and select features to enable like NetShield and VPN Accelerator & click create. Some users have reported issues (#236,#211) when NetShield is set to Block malware, ads and trackers. Please see Troubleshooting for a work-around.

Generated config might look something like below,

[Interface]
# Key for <name>
# VPN Accelerator = on
PrivateKey = KLjfIMiuxPskM4+DaSUDmL2uSIYKJ9Wap+CHvs0Lfkw=
Address = 10.2.0.2/32
DNS = 10.2.0.1

[Peer]
# NL-FREE#128
PublicKey = jbTC1lYeHxiz1LNSJHQMKDTq6sHgcWxkBwXvt7GWo1E=
AllowedIPs = 0.0.0.0/0
Endpoint = 91.229.23.180:51820

You will PrivateKey and optionally Endpoint(without port part) from the above config.
See https://protonvpn.com/support/wireguard-configurations/ for more info.

Environment Variables & Config

CLI arguments will always take precedence over environment variables.
Environment variables takes precedence over any config file.
If private key is not specified via CLI or environment variable, it is searched in following locations.
- /etc/protonwire/private-key
- /run/secrets/protonwire-private-key
- /run/secrets/protonwire/private-key
- ${CREDENTIALS_DIRECTORY}/private-key (Only if $CREDENTIALS_DIRECTORY is set)
- ${CREDENTIALS_DIRECTORY}/protonwire-private-key (Only if $CREDENTIALS_DIRECTORY is set)

Important

Private key file MUST NOT be world-readable.

Name	Default/Required	Description
`PROTONVPN_SERVER`	REQUIRED	(String) ProtonVPN server to connect to.
`WIREGUARD_PRIVATE_KEY`	Required if not specified via mount or secrets	(String) Wireguard Private key
`IPCHECK_URL`	https://icanhazip.com/	(String) URL to check client IP.
`IPCHECK_INTERVAL`	`60`	(Integer) Interval between internal health-checks in seconds. Set this to `0` to disable IP checks.
`SKIP_DNS_CONFIG`	false	(Boolean) Set this to `1` or `true` to skip configuring DNS.
`KILL_SWITCH`	false	(Boolean) Enable KillSwitch (Experimental)

PROTONVPN_SERVER

This should be server DNS name like, node-nl-01.protonvpn.net or IP address like 91.229.23.180. Server name like NL#1(or NL-1) may work for pro servers, it is not recommended.

Important

Script cannot validate if specified server is available under your plan. It is user's responsibility to ensure that server specified is available under your subscription and supports required features, like P2P, Streaming etc. Use --p2p, --streaming, --secure-core flags to enable client side validations.

KillSwitch

Warning

This feature is experimental and is NOT covered by semver compatibility guarantees.

Kill-Switch is not a hard kill-switch but more of an internet kill-switch. LAN addresses, Link-Local addresses and CGNAT (also Tailscale) addresses remain reachable. Unlike most VPN containers, kill-switch is implemented via routing policies, routing priorities and custom route tables rather than firewall rules.

Kill-switch WILL NOT be disabled during reconnects.
Kill-switch WILL NOT be disabled when running protonwire disconnect unless --kill-switch flag is ALSO specified.

Usage

ProtonVPN WireGuard Client

Usage: protonwire [OPTIONS...]
or: protonwire [OPTIONS...] c|connect [SERVER]
or: protonwire [OPTIONS...] d|disconnect
or: protonwire [OPTIONS...] check
or: protonwire [OPTIONS...] disable-killswitch
or: protonwire [OPTIONS...] server-info [SERVER]

Options:
  -k, --private-key FILE|KEY    Wireguard private key or
                                file containing private key
      --service                 Run as service
      --service-status-file     Use status file created by --service
                                for healthchecks. Only valid when both process
                                are running within the same container.
      --metadata-url URL        Server metadata endpoint URL
      --check-interval INT      IP check interval in seconds (default 60)
      --check-url URL           IP check endpoint URL
      --skip-dns-config         Skip configuring DNS.
                                (Useful for Kubernetes and Consul)
      --kill-switch             Enable killswitch (Experimental)
      --p2p                     Verify if specified server supports P2P
      --streaming               Verify if specified server supports streaming
      --tor                     Verify if specified server supports Tor
      --secure-core             Verify if specified server supports secure core
  -q, --quiet                   Show only errors
  -v, --verbose                 Show debug logs
  -h, --help                    Display this help and exit
      --version                 Display version and exit

Examples:
  protonwire connect nl-1       Connect to server nl-1
  protonwire d --kill-switch    Disconnect from current server and disable kill-switch
  protonwire verify [SERVER]    Check if connected to a server

Files:
  /etc/protonwire/private-key   WireGuard private key

Environment:
  WIREGUARD_PRIVATE_KEY         WireGuard private key or file
  PROTONVPN_SERVER              ProtonVPN server
  IPCHECK_INTERVAL              Custom IP check interval in seconds (default 60)
  IPCHECK_URL                   IP check endpoint URL (must be https://)
  SKIP_DNS_CONFIG               Set to '1' to skip configuring DNS
  KILL_SWITCH                   Set to '1' to enable killswitch (Experimental)
  DEBUG                         Set to '1' to enable debug logs

Health-checks

Script supports healthcheck sub-command. By default, when running as a service, script will keep checking every IPCHECK_INTERVAL (default=60) seconds using the IPCHECK_URL api endpoint. To disable healthchecks entirely set IPCHECK_INTERVAL to 0
Use protonwire healthcheck --silent --service-status-file as the HEALTHCHECK command. Same can be used as liveness probe and readiness probe for Kubernetes.

Docker Compose

If entire stack is in a single compose file, then network_mode: service:protonwire on the services which should be routed via VPN. If the VPN stack is NOT in same compose file use network_mode: container:<protonwire-container-name>.

As an example, run caddy web-server, proxying https://ip.me, via VPN using the compose config given below. Once the stack is up, visiting the http://localhost:8000, or curl -s http://localhost:8000 should show VPN's country and IP address.

version: '2.3'
services:
  protonwire:
    container_name: protonwire
    # Use semver tags or sha256 hashes of manifests.
    # using latest tag can lead to issues when used with
    # automatic image updaters like watchtower/podman.
    image: ghcr.io/tprasadtp/protonwire:latest
    init: true
    restart: unless-stopped
    environment:
      # Quote this value as server name can contain '#'.
      PROTONVPN_SERVER: "node-nl-96.protonvpn.net"  # NL-FREE#100070
      # Set this to 1 to show debug logs for issue forms.
      DEBUG: "0"
      # Set this to 0 to disable kill-switch.
      KILL_SWITCH: "1"
    # NET_ADMIN capability is mandatory!
    cap_add:
      - NET_ADMIN
    # sysctl net.ipv4.conf.all.rp_filter is mandatory!
    # net.ipv6.conf.all.disable_ipv6 disables IPv6 as protonVPN does not support IPv6.
    # 'net.*' sysctls are not required on application containers,
    # as they share network stack with protonwire container.
    sysctls:
      net.ipv4.conf.all.rp_filter: 2
      net.ipv6.conf.all.disable_ipv6: 1
    volumes:
      - type: tmpfs
        target: /tmp
      - type: bind
        source: private.key
        target: /etc/protonwire/private-key
        read_only: true
    ports:
      - 8000:80
  # This is sample application which will be routed over VPN
  # Replace this with your preferred application(s).
  caddy_proxy:
    image: caddy:latest
    network_mode: service:protonwire
    command: |
      caddy reverse-proxy \
          --change-host-header \
          --from :80 \
          --to https://ip.me:443

Important

It is essential to expose/publish port(s) on protonwire container, instead of application container.
SHOULD NOT run the container as privileged. Adding capability CAP_NET_ADMIN AND defined sysctls should be sufficient.
Value for PROTONVPN_SERVER must be enclosed within quotes as server name can contain '#'

Podman

This section covers running containers via podman. But for deployments use podman's systemd integration.

Create a podman secret for private key

podman secret create protonwire-private-key <PRIVATE_KEY|PATH_TO_PRIVATE_KEY>

Run protonwire container.

podman run \
    -it \
    --rm \
    --init \
    --replace \
    --tz=local \
    --tmpfs=/tmp \
    --name=protonwire \
    --secret="protonwire-private-key,mode=600" \
    --env=PROTONVPN_SERVER="node-nl-03.protonvpn.net" \
    --env=DEBUG=0 \
    --env=KILL_SWITCH=1 \
    --cap-add=NET_ADMIN \
    --sysctl=net.ipv4.conf.all.rp_filter=2 \
    --sysctl=net.ipv6.conf.all.disable_ipv6=1 \
    --publish=8000:8000 \
    --health-start-period=20s \
    --health-cmd="protonwire check --service-status-file --silent" \
    --health-interval=120s \
    --health-on-failure=stop \
    ghcr.io/tprasadtp/protonwire:latest

Create app(s) sharing network namespace with protonwire container. As an example, we are using caddy to proxy website which shows IP info. Replace these with your application container(s) like pyload, firefox etc.

podman run \
    -it \
    --rm \
    --tz=local \
    --name=protonwire-demo-app \
    --network=container:protonwire \
    docker.io/library/caddy:latest \
    caddy reverse-proxy --change-host-header --from :8000 --to https://ip.me:443

Verify that application containers are using VPN by visiting http://:8000.

Important

The above example publishes container port 8000 to host port 8000. You MUST change these to match your application container(s).
To publish additional ports from other containers using this VPN (usually done via argument --publish <host-port>:<container-port>), it MUST be done on protonwire container.
--sysctl flags are important! without these, container cannot create/manage WireGuard interface.
mode=600 in secret mount is important, as script refuses to use private key with insecure permissions.
If using pods, sysctls MUST be defined on the pod no the protonwire container.

Docker

Pull docker image (if required)

docker pull ghcr.io/tprasadtp/protonwire:latest

Run the VPN container. Assuming that a container which needs to be routed via VPN, listening on container port 80 and you wish to map it to host port 8000,

docker run \
    -it \
    --rm \
    --init \
    --publish 8000:80 \
    --name protonwire \
    --cap-add NET_ADMIN \
    --env PROTONVPN_SERVER=<server-name-or-dns> \
    --sysctl net.ipv4.conf.all.rp_filter=2 \
    --mount type=tmpfs,dst=/tmp \
    --mount type=bind,src=<absolute-path-to-key-file>,dst=/etc/protonwire/private-key,readonly \
    ghcr.io/tprasadtp/protonwire:latest

Important

To publish additional ports from other containers using this VPN, it MUST be done on the protonwire container!
--sysctl and --cap-add flags are important! without these, container cannot create or manage WireGuard interfaces or routing.
docker rootless should also work just fine for most users, but is considered experimental.

To use VPN in other container(s), use --net=container:protonwire flag. For example, we can run caddy to proxy https://ip.me/ via VPN. Visiting http://localhost:8000, or curl http://localhost:8000 should show VPN's country and IP address.

docker run \
    -it \
    --rm \
    --net=container:protonwire \
    caddy:latest \
    caddy reverse-proxy \
        --change-host-header \
        --from :80 \
        --to https://ip.me:443

Troubleshooting & FAQ

See Troubleshooting and FAQ

SLSA Provenance

All artifacts provided by this repository meet SLSA L3. See docs for more info.

Cosign Images

All artifacts provided by this repository are signed using cosign. See docs for more info.

Building

Building requires task, go crane and docker with buildx plugin.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Protonwire - Docker Wireguard Client for ProtonVPN

Features

Container Images

Linux Kernel Requirements

Generating WireGuard Private Key

Environment Variables & Config

PROTONVPN_SERVER

KillSwitch

Usage

Health-checks

Docker Compose

Podman

Docker

Troubleshooting & FAQ

SLSA Provenance

Cosign Images

Building

Files

README.md

Latest commit

History

README.md

File metadata and controls

Protonwire - Docker Wireguard Client for ProtonVPN

Features

Container Images

Linux Kernel Requirements

Generating WireGuard Private Key

Environment Variables & Config

PROTONVPN_SERVER

KillSwitch

Usage

Health-checks

Docker Compose

Podman

Docker

Troubleshooting & FAQ

SLSA Provenance

Cosign Images

Building