Skip to content

Latest commit

 

History

History
106 lines (91 loc) · 3.83 KB

README.md

File metadata and controls

106 lines (91 loc) · 3.83 KB
Raw

Micro Maestro 6-Channel + Node.js + RaspberryPi

Install

npm install maestro-servo-controller

Platforms

Typical device names for:

Linux

  • RaspberryPi: /dev/ttyACM0
  • Ubuntu: /dev/ttyAMA0

Mac

  • Mac: /dev/cu.usbmodem00115481

NOTE: The trailing numbers in the device path name are likely to be different for your specific system. To discover the exact device path name for your system, simply run ls /dev/ before connecting the device to your host computer. Next, connect your device to the host machine. Now, run ls /dev/ once again, and the newest device paths belong to your maestro device. Of the newly visible device path names, the one with the lower number is the device path name to use.

Usage

var servo = require('maestro-servo-controller');

Connect

To connect to the maestro device through the serial connection, use the following command with your device's path name:

//--------------------------------------------------------------------
//  connect(device_path)
//    - device_path: the path to the Maestro device
//
//  NOTE: The Maestro's serial mode must be set to "USB Dual Port".
//--------------------------------------------------------------------
servo.connect('/dev/cu.usbmodem00115481');

Set Speed

To set a specific servo's speed, use the following command:

//--------------------------------------------------------------------
//  setSpeed(channel, speed)
//    - channel: servo number
//    - speed: servo speed
//--------------------------------------------------------------------
servo.setSpeed(0, 25);

Set Acceleration

To set a specific servo's acceleration, use the following command:

//--------------------------------------------------------------------
//  setAccel(channel, accel)
//    - channel: servo number
//    - accel: servo acceleration
//--------------------------------------------------------------------
servo.setAccel(0, 2);

Set Target

Here is where things get truly interesting! To set a specific servo's target position, causing the servo shaft to progress to a desired position, use the following command:

//--------------------------------------------------------------------
//  setTarget(channel, target)
//    - channel: servo number
//    - target: the target servo posistion in quarter-microseconds
//
//  servo protections:
//    - servo min: 2000 (500us)
//    - servo max: 10000 (2500us)
//
//  for reference:
//    - servo center: ~6000 (1500us)
//--------------------------------------------------------------------
servo.setTarget(0, 6000);

Get Position

If you need to retrieve the current position of a specific servo, use the following command:

//--------------------------------------------------------------------
//  getPosition(channel)
//    - channel: servo number
//
//  returns: an integer representing the servo's current position;
//            is a quarter-microsecond value like the target value
//--------------------------------------------------------------------
console.log('Servo position:', servo.getPosition(0));

Disconnect

To disconnect to the maestro device attached to your computer's serial connection, use the following command:

//--------------------------------------------------------------------
//  disconnect()
//    - close connection to Maestro device
//--------------------------------------------------------------------
servo.disconnect();

References