Backlight Flickering V1. 5.0. Atlantic Explorer

[ALENOC]

I've just programmed my board with the last FW V1.5.0. On my Atlantic Explorer FW E, the board is configured in MITM, I've noticed that connecting the board the display backlight is flickering, do you notice the same effect? Maybe the MQQT Board consume to much, how we can reduce this consumption?

[taloriko]

Currently, I also have version 1.5.0 installed.

I experienced flickering as well, but it wasn't an issue with the power consumption. Instead, it was caused by the contacts in the connector. I used a needle to slightly press the contacts inward, ensuring better contact with the pins.

I did the same with the jumper cables.

[ALENOC]

I've found the problem, the cable from the main board of the heat pump was near the cable from the AquaMQTT to HMI, moving them away from each other the problem disappears.