diff --git a/EBEAM-Dashboard-Logs/disconnected_usb_cable_log_2024-11-11_16-26-34.txt b/EBEAM-Dashboard-Logs/disconnected_usb_cable_log_2024-11-11_16-26-34.txt
new file mode 100644
index 00000000..e1a1127d
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/disconnected_usb_cable_log_2024-11-11_16-26-34.txt
@@ -0,0 +1,600 @@
+[16:22:06] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:22:07] - INFO: Serial connection established on COM11
+[16:22:07] - INFO: G9 driver initialized
+[16:22:08] - ERROR: Exception while initializing temperature controllers at DUMMY_COM5: 'ModbusSerialClient' object has no attribute 'port'
+[16:22:08] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:22:08] - DEBUG: Raw command sent: SABC3
+[16:22:08] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[16:22:08] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:22:08] - DEBUG: Raw command sent: SABC3
+[16:22:08] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[16:22:08] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:22:08] - DEBUG: Raw command sent: SABC3
+[16:22:08] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[16:22:08] - DEBUG: Power supply 1 not initialized. Button disabled.
+[16:22:08] - DEBUG: Power supply 2 not initialized. Button disabled.
+[16:22:08] - DEBUG: Power supply 3 not initialized. Button disabled.
+[16:22:08] - DEBUG: No power supplies were initialized properly.
+[16:22:08] - DEBUG: No connection to CCS temperature controller 1
+[16:22:08] - DEBUG: No connection to CCS temperature controller 2
+[16:22:08] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[16:22:08] - INFO: Interlock E-STOP Int: red -> green
+[16:22:08] - INFO: Interlock E-STOP Ext: red -> green
+[16:22:08] - INFO: Interlock Door: red -> green
+[16:22:08] - INFO: Interlock Vacuum Power: red -> green
+[16:22:08] - INFO: Interlock Vacuum Pressure: red -> green
+[16:22:08] - INFO: Interlock High Oil: red -> green
+[16:22:08] - INFO: Interlock Low Oil: red -> green
+[16:22:08] - INFO: Interlock Water: red -> green
+[16:22:08] - INFO: Interlock HVolt ON: red -> green
+[16:22:08] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[1, 0, 1, 0, 0, 0, 1]
+[16:22:13] - INFO: Interlock E-STOP Int: green -> red
+[16:22:13] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[0, 0, 1, 0, 0, 1, 0]
+[16:22:16] - INFO: Interlock E-STOP Int: red -> green
+[16:22:16] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:22:17] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:18] - INFO: Interlock G9SP Active: green -> red
+[16:22:18] - INFO: Interlock G9SP Active: red -> green
+[16:22:18] - DEBUG: No connection to CCS temperature controller 1
+[16:22:18] - DEBUG: No connection to CCS temperature controller 2
+[16:22:18] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:19] - INFO: Interlock G9SP Active: green -> red
+[16:22:19] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:20] - INFO: Interlock G9SP Active: green -> red
+[16:22:20] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:20] - INFO: Interlock G9SP Active: green -> red
+[16:22:20] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:21] - INFO: Interlock G9SP Active: green -> red
+[16:22:21] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:22] - INFO: Interlock G9SP Active: green -> red
+[16:22:22] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:23] - INFO: Interlock G9SP Active: green -> red
+[16:22:23] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:23] - INFO: Interlock G9SP Active: green -> red
+[16:22:23] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:24] - INFO: Interlock G9SP Active: green -> red
+[16:22:24] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:25] - INFO: Interlock G9SP Active: green -> red
+[16:22:25] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:26] - INFO: Interlock G9SP Active: green -> red
+[16:22:26] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:27] - INFO: Interlock G9SP Active: green -> red
+[16:22:27] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:27] - INFO: Interlock G9SP Active: green -> red
+[16:22:27] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:28] - INFO: Interlock G9SP Active: green -> red
+[16:22:28] - INFO: Interlock G9SP Active: red -> green
+[16:22:28] - DEBUG: No connection to CCS temperature controller 1
+[16:22:28] - DEBUG: No connection to CCS temperature controller 2
+[16:22:28] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:29] - INFO: Interlock G9SP Active: green -> red
+[16:22:29] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:30] - INFO: Interlock G9SP Active: green -> red
+[16:22:30] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:31] - INFO: Interlock G9SP Active: green -> red
+[16:22:31] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:31] - INFO: Interlock G9SP Active: green -> red
+[16:22:31] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:32] - INFO: Interlock G9SP Active: green -> red
+[16:22:32] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:33] - INFO: Interlock G9SP Active: green -> red
+[16:22:33] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:34] - INFO: Interlock G9SP Active: green -> red
+[16:22:34] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:34] - INFO: Interlock G9SP Active: green -> red
+[16:22:34] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:35] - INFO: Interlock G9SP Active: green -> red
+[16:22:35] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:36] - INFO: Interlock G9SP Active: green -> red
+[16:22:36] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:37] - INFO: Interlock G9SP Active: green -> red
+[16:22:37] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:38] - INFO: Interlock G9SP Active: green -> red
+[16:22:38] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:38] - INFO: Interlock G9SP Active: green -> red
+[16:22:38] - INFO: Interlock G9SP Active: red -> green
+[16:22:38] - DEBUG: No connection to CCS temperature controller 1
+[16:22:38] - DEBUG: No connection to CCS temperature controller 2
+[16:22:38] - DEBUG: No connection to CCS temperature controller 3
+[1, 0, 1, 0, 0, 0, 1]
+[16:22:39] - INFO: Interlock E-STOP Int: green -> red
+[16:22:39] - INFO: Interlock G9SP Active: green -> red
+[16:22:39] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:22:45] - INFO: Interlock E-STOP Int: red -> green
+[16:22:45] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:22:48] - DEBUG: No connection to CCS temperature controller 1
+[16:22:48] - DEBUG: No connection to CCS temperature controller 2
+[16:22:48] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:22:53] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:54] - INFO: Interlock G9SP Active: green -> red
+[16:22:54] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:55] - INFO: Interlock G9SP Active: green -> red
+[16:22:55] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:55] - INFO: Interlock G9SP Active: green -> red
+[16:22:55] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:56] - INFO: Interlock G9SP Active: green -> red
+[16:22:56] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:57] - INFO: Interlock G9SP Active: green -> red
+[16:22:57] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:58] - INFO: Interlock G9SP Active: green -> red
+[16:22:58] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:58] - INFO: Interlock G9SP Active: green -> red
+[16:22:58] - INFO: Interlock G9SP Active: red -> green
+[16:22:58] - DEBUG: No connection to CCS temperature controller 1
+[16:22:59] - DEBUG: No connection to CCS temperature controller 2
+[16:22:59] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:22:59] - INFO: Interlock G9SP Active: green -> red
+[16:22:59] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:00] - INFO: Interlock G9SP Active: green -> red
+[16:23:00] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:01] - INFO: Interlock G9SP Active: green -> red
+[16:23:01] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:02] - INFO: Interlock G9SP Active: green -> red
+[16:23:02] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:02] - INFO: Interlock G9SP Active: green -> red
+[16:23:02] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:03] - INFO: Interlock G9SP Active: green -> red
+[16:23:03] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:04] - INFO: Interlock G9SP Active: green -> red
+[16:23:04] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:05] - INFO: Interlock G9SP Active: green -> red
+[16:23:05] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:05] - INFO: Interlock G9SP Active: green -> red
+[16:23:05] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:06] - INFO: Interlock G9SP Active: green -> red
+[16:23:06] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:07] - INFO: Interlock G9SP Active: green -> red
+[16:23:07] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:08] - INFO: Interlock G9SP Active: green -> red
+[16:23:08] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:09] - INFO: Interlock G9SP Active: green -> red
+[16:23:09] - INFO: Interlock G9SP Active: red -> green
+[16:23:09] - DEBUG: No connection to CCS temperature controller 1
+[16:23:09] - DEBUG: No connection to CCS temperature controller 2
+[16:23:09] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:09] - INFO: Interlock G9SP Active: green -> red
+[16:23:09] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:10] - INFO: Interlock G9SP Active: green -> red
+[16:23:10] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:11] - INFO: Interlock G9SP Active: green -> red
+[16:23:11] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:12] - INFO: Interlock G9SP Active: green -> red
+[16:23:12] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:12] - INFO: Interlock G9SP Active: green -> red
+[16:23:12] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:13] - INFO: Interlock G9SP Active: green -> red
+[16:23:13] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:14] - INFO: Interlock G9SP Active: green -> red
+[16:23:14] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:15] - INFO: Interlock G9SP Active: green -> red
+[16:23:15] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:15] - INFO: Interlock G9SP Active: green -> red
+[16:23:15] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:16] - INFO: Interlock G9SP Active: green -> red
+[16:23:16] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:17] - INFO: Interlock G9SP Active: green -> red
+[16:23:17] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:18] - INFO: Interlock G9SP Active: green -> red
+[16:23:18] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:19] - INFO: Interlock G9SP Active: green -> red
+[16:23:19] - INFO: Interlock G9SP Active: red -> green
+[16:23:19] - DEBUG: No connection to CCS temperature controller 1
+[16:23:19] - DEBUG: No connection to CCS temperature controller 2
+[16:23:19] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:19] - INFO: Interlock G9SP Active: green -> red
+[16:23:19] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:20] - INFO: Interlock G9SP Active: green -> red
+[16:23:20] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:21] - INFO: Interlock G9SP Active: green -> red
+[16:23:21] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:23:22] - INFO: Interlock G9SP Active: green -> red
+[16:23:22] - INFO: Interlock G9SP Active: red -> green
+[16:23:22] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:22] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:22] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:22] - INFO: Interlock Door: green -> red
+[16:23:22] - INFO: Interlock Water: green -> red
+[16:23:22] - INFO: Interlock Vacuum Power: green -> red
+[16:23:22] - INFO: Interlock Vacuum Pressure: green -> red
+[16:23:22] - INFO: Interlock Low Oil: green -> red
+[16:23:22] - INFO: Interlock High Oil: green -> red
+[16:23:22] - INFO: Interlock E-STOP Int: green -> red
+[16:23:22] - INFO: Interlock E-STOP Ext: green -> red
+[16:23:22] - INFO: Interlock All Interlocks: green -> red
+[16:23:22] - INFO: Interlock G9SP Active: green -> red
+[16:23:22] - INFO: Interlock HVolt ON: green -> red
+[16:23:23] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:23] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:23] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:24] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:24] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:24] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:26] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:26] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:26] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:28] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:28] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:28] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:28] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:23:29] - DEBUG: No connection to CCS temperature controller 1
+[16:23:29] - DEBUG: No connection to CCS temperature controller 2
+[16:23:29] - DEBUG: No connection to CCS temperature controller 3
+[16:23:31] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:31] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:31] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:33] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:33] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:33] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:36] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:36] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:36] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:39] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:39] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:39] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:39] - DEBUG: No connection to CCS temperature controller 1
+[16:23:39] - DEBUG: No connection to CCS temperature controller 2
+[16:23:39] - DEBUG: No connection to CCS temperature controller 3
+[16:23:41] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:41] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:41] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:41] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:23:44] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:44] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:44] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:46] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:46] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:49] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:49] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:49] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:49] - DEBUG: No connection to CCS temperature controller 1
+[16:23:49] - DEBUG: No connection to CCS temperature controller 2
+[16:23:49] - DEBUG: No connection to CCS temperature controller 3
+[16:23:51] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:51] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:51] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:54] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:54] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:54] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:56] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:56] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:56] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:56] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:23:59] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:59] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:23:59] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:00] - DEBUG: No connection to CCS temperature controller 1
+[16:24:00] - DEBUG: No connection to CCS temperature controller 2
+[16:24:00] - DEBUG: No connection to CCS temperature controller 3
+[16:24:01] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:01] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:01] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:04] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:04] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:04] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:07] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:07] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:07] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:09] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:09] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:09] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:09] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:24:10] - DEBUG: No connection to CCS temperature controller 1
+[16:24:10] - DEBUG: No connection to CCS temperature controller 2
+[16:24:10] - DEBUG: No connection to CCS temperature controller 3
+[16:24:12] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:12] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:12] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:14] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:14] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:14] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:17] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:17] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:17] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:19] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:19] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:19] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:20] - DEBUG: No connection to CCS temperature controller 1
+[16:24:20] - DEBUG: No connection to CCS temperature controller 2
+[16:24:20] - DEBUG: No connection to CCS temperature controller 3
+[16:24:22] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:22] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:22] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:22] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:24:24] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:24] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:24] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:27] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:27] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:27] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:30] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:30] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:30] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:30] - DEBUG: No connection to CCS temperature controller 1
+[16:24:30] - DEBUG: No connection to CCS temperature controller 2
+[16:24:31] - DEBUG: No connection to CCS temperature controller 3
+[16:24:32] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:32] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:32] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:35] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:35] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:35] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:35] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:24:37] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:37] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:37] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:40] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:40] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:40] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:40] - DEBUG: No connection to CCS temperature controller 1
+[16:24:40] - DEBUG: No connection to CCS temperature controller 2
+[16:24:41] - DEBUG: No connection to CCS temperature controller 3
+[16:24:42] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:42] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:42] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:45] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:45] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:45] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:47] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:47] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:47] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:47] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:24:50] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:50] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:50] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:50] - DEBUG: No connection to CCS temperature controller 1
+[16:24:50] - DEBUG: No connection to CCS temperature controller 2
+[16:24:51] - DEBUG: No connection to CCS temperature controller 3
+[16:24:53] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:53] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:53] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:55] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:55] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:55] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:58] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:58] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:24:58] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:00] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:00] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:00] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:00] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:25:01] - DEBUG: No connection to CCS temperature controller 1
+[16:25:01] - DEBUG: No connection to CCS temperature controller 2
+[16:25:01] - DEBUG: No connection to CCS temperature controller 3
+[16:25:03] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:03] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:03] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:05] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:05] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:05] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:08] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:08] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:08] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:10] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:10] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:10] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:11] - DEBUG: No connection to CCS temperature controller 1
+[16:25:11] - DEBUG: No connection to CCS temperature controller 2
+[16:25:11] - DEBUG: No connection to CCS temperature controller 3
+[16:25:13] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:13] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:13] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:13] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:25:15] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:15] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:15] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:18] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:18] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:18] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:21] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:21] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:21] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:21] - DEBUG: No connection to CCS temperature controller 1
+[16:25:21] - DEBUG: No connection to CCS temperature controller 2
+[16:25:22] - DEBUG: No connection to CCS temperature controller 3
+[16:25:23] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:23] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:23] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:26] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:26] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:26] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:26] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:25:28] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:28] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:28] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:31] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:31] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:31] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:31] - DEBUG: No connection to CCS temperature controller 1
+[16:25:31] - DEBUG: No connection to CCS temperature controller 2
+[16:25:32] - DEBUG: No connection to CCS temperature controller 3
+[16:25:33] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:33] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:33] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:36] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:36] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:36] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:38] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:38] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:38] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:38] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:25:41] - DEBUG: No connection to CCS temperature controller 1
+[16:25:41] - DEBUG: No connection to CCS temperature controller 2
+[16:25:41] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:41] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:41] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:42] - DEBUG: No connection to CCS temperature controller 3
+[16:25:44] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:44] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:44] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:46] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:46] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:46] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:49] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:49] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:49] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:51] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:51] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:51] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:51] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:25:51] - DEBUG: No connection to CCS temperature controller 1
+[16:25:51] - DEBUG: No connection to CCS temperature controller 2
+[16:25:52] - DEBUG: No connection to CCS temperature controller 3
+[16:25:54] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:54] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:54] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:56] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:56] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:56] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:59] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:59] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:25:59] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:01] - DEBUG: No connection to CCS temperature controller 1
+[16:26:01] - DEBUG: No connection to CCS temperature controller 2
+[16:26:01] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:01] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:01] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:03] - DEBUG: No connection to CCS temperature controller 3
+[16:26:04] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:04] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:04] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:04] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:26:07] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:07] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:07] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:09] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:09] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:09] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:12] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:12] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:12] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:12] - DEBUG: No connection to CCS temperature controller 1
+[16:26:12] - DEBUG: No connection to CCS temperature controller 2
+[16:26:13] - DEBUG: No connection to CCS temperature controller 3
+[16:26:14] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:14] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:14] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:17] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:17] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:17] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:17] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:26:19] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:19] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:19] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:22] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:22] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:22] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:22] - DEBUG: No connection to CCS temperature controller 1
+[16:26:22] - DEBUG: No connection to CCS temperature controller 2
+[16:26:23] - DEBUG: No connection to CCS temperature controller 3
+[16:26:25] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:25] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:25] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:27] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:27] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:27] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:30] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:30] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:30] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:30] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:26:32] - DEBUG: No connection to CCS temperature controller 1
+[16:26:32] - DEBUG: No connection to CCS temperature controller 2
+[16:26:32] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:32] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:32] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:26:33] - DEBUG: No connection to CCS temperature controller 3
+
diff --git a/EBEAM-Dashboard-Logs/initiated_app_while_sic_in_error_mode_log_2024-11-11_16-27-32.txt b/EBEAM-Dashboard-Logs/initiated_app_while_sic_in_error_mode_log_2024-11-11_16-27-32.txt
new file mode 100644
index 00000000..24ca48ce
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/initiated_app_while_sic_in_error_mode_log_2024-11-11_16-27-32.txt
@@ -0,0 +1,32 @@
+[16:27:18] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:27:19] - ERROR: Failed to open serial port COM11: could not open port 'COM11': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:27:19] - INFO: G9 driver initialized
+[16:27:20] - ERROR: Exception while initializing temperature controllers at DUMMY_COM5: 'ModbusSerialClient' object has no attribute 'port'
+[16:27:20] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:27:20] - DEBUG: Raw command sent: SABC3
+[16:27:20] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[16:27:20] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:27:20] - DEBUG: Raw command sent: SABC3
+[16:27:20] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[16:27:20] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:27:20] - DEBUG: Raw command sent: SABC3
+[16:27:20] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[16:27:20] - DEBUG: Power supply 1 not initialized. Button disabled.
+[16:27:20] - DEBUG: Power supply 2 not initialized. Button disabled.
+[16:27:20] - DEBUG: Power supply 3 not initialized. Button disabled.
+[16:27:20] - DEBUG: No power supplies were initialized properly.
+[16:27:20] - DEBUG: No connection to CCS temperature controller 1
+[16:27:20] - DEBUG: No connection to CCS temperature controller 2
+[16:27:20] - DEBUG: No connection to CCS temperature controller 3
+[16:27:20] - WARNING: G9 driver not connected
+[16:27:21] - WARNING: G9 driver not connected
+[16:27:22] - WARNING: G9 driver not connected
+[16:27:23] - WARNING: G9 driver not connected
+[16:27:26] - WARNING: G9 driver not connected
+[16:27:26] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:27:29] - WARNING: G9 driver not connected
+[16:27:30] - DEBUG: No connection to CCS temperature controller 1
+[16:27:30] - DEBUG: No connection to CCS temperature controller 2
+[16:27:30] - DEBUG: No connection to CCS temperature controller 3
+[16:27:31] - WARNING: G9 driver not connected
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-08_17-47-26.txt b/EBEAM-Dashboard-Logs/log_2024-12-08_17-47-26.txt
new file mode 100644
index 00000000..e9e898fc
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-08_17-47-26.txt
@@ -0,0 +1,288 @@
+[17:44:27] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:44:30] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:30] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:44:30] - INFO: G9 driver initialized
+[17:44:30] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[17:44:30] - ERROR: Failed to connect to the E5CN Modbus device.
+[17:44:30] - ERROR: Cannot start reading temperatures - connection failed
+[17:44:30] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[17:44:30] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:44:30] - DEBUG: Raw command sent: SABC3
+[17:44:30] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[17:44:30] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:44:30] - DEBUG: Raw command sent: SABC3
+[17:44:30] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[17:44:30] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:44:30] - DEBUG: Raw command sent: SABC3
+[17:44:30] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[17:44:30] - DEBUG: Power supply 1 not initialized. Button disabled.
+[17:44:30] - DEBUG: Power supply 2 not initialized. Button disabled.
+[17:44:30] - DEBUG: Power supply 3 not initialized. Button disabled.
+[17:44:30] - DEBUG: No power supplies were initialized properly.
+[17:44:30] - DEBUG: No connection to CCS temperature controller 1
+[17:44:30] - DEBUG: No connection to CCS temperature controller 2
+[17:44:30] - DEBUG: No connection to CCS temperature controller 3
+[17:44:31] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:31] - WARNING: G9 driver not connected
+[17:44:33] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.281936645507812, 6: 0.0}
+[17:44:33] - WARNING: G9 driver not connected
+[17:44:36] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.280088424682617, 6: 0.0}
+[17:44:36] - WARNING: G9 driver not connected
+[17:44:37] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:39] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.284984588623047, 6: 0.0}
+[17:44:42] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.288053512573242, 6: 0.0}
+[17:44:42] - WARNING: G9 driver not connected
+[17:44:42] - DEBUG: No connection to CCS temperature controller 1
+[17:44:42] - DEBUG: No connection to CCS temperature controller 2
+[17:44:43] - DEBUG: No connection to CCS temperature controller 3
+[17:44:45] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.29912757873535, 6: 0.0}
+[17:44:46] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:47] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:48] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:48] - WARNING: G9 driver not connected
+[17:44:48] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:49] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:50] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:51] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:44:53] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.308940887451172, 6: 0.0}
+[17:44:54] - DEBUG: No connection to CCS temperature controller 1
+[17:44:54] - DEBUG: No connection to CCS temperature controller 2
+[17:44:54] - DEBUG: No connection to CCS temperature controller 3
+[17:44:54] - WARNING: G9 driver not connected
+[17:44:56] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.31631851196289, 6: 0.0}
+[17:44:59] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.315074920654297, 6: 0.0}
+[17:44:59] - WARNING: G9 driver not connected
+[17:45:02] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.313859939575195, 6: 0.0}
+[17:45:04] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.32123374938965, 6: 0.0}
+[17:45:05] - DEBUG: No connection to CCS temperature controller 1
+[17:45:05] - DEBUG: No connection to CCS temperature controller 2
+[17:45:05] - DEBUG: No connection to CCS temperature controller 3
+[17:45:05] - WARNING: G9 driver not connected
+[17:45:06] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:08] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.326148986816406, 6: 0.0}
+[17:45:11] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.332895278930664, 6: 0.0}
+[17:45:11] - WARNING: G9 driver not connected
+[17:45:13] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.335357666015625, 6: 0.0}
+[17:45:16] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.339645385742188, 6: 0.0}
+[17:45:16] - DEBUG: No connection to CCS temperature controller 1
+[17:45:16] - DEBUG: No connection to CCS temperature controller 2
+[17:45:16] - DEBUG: No connection to CCS temperature controller 3
+[17:45:16] - WARNING: G9 driver not connected
+[17:45:19] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.338424682617188, 6: 0.0}
+[17:45:20] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:22] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.344562530517578, 6: 0.0}
+[17:45:23] - WARNING: G9 driver not connected
+[17:45:23] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:26] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.34701919555664, 6: 0.0}
+[17:45:29] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.35008430480957, 6: 0.0}
+[17:45:29] - DEBUG: No connection to CCS temperature controller 1
+[17:45:29] - DEBUG: No connection to CCS temperature controller 2
+[17:45:29] - DEBUG: No connection to CCS temperature controller 3
+[17:45:29] - WARNING: G9 driver not connected
+[17:45:30] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:31] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:33] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.35008430480957, 6: 0.0}
+[17:45:36] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.3543758392334, 6: 0.0}
+[17:45:36] - WARNING: G9 driver not connected
+[17:45:37] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:38] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:40] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.359291076660156, 6: 0.0}
+[17:45:41] - DEBUG: No connection to CCS temperature controller 1
+[17:45:41] - DEBUG: No connection to CCS temperature controller 2
+[17:45:41] - DEBUG: No connection to CCS temperature controller 3
+[17:45:41] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:41] - WARNING: G9 driver not connected
+[17:45:44] - ERROR: Return message is an Error: Unit - 4 val -0.0
+[17:45:44] - ERROR: Return message is an Error: Unit - 6 val -25.369125366210938
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.369125366210938, 6: -1}
+[17:45:46] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.36729621887207, 6: 0.0}
+[17:45:47] - WARNING: G9 driver not connected
+[17:45:48] - ERROR: Return message is an Error: Unit - 2 val -0.0
+[17:45:49] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: -1, 3: 0.0, 4: -1, 5: 25.372194290161133, 6: 0.0}
+[17:45:50] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:51] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:51] - DEBUG: No connection to CCS temperature controller 1
+[17:45:51] - DEBUG: No connection to CCS temperature controller 2
+[17:45:51] - DEBUG: No connection to CCS temperature controller 3
+[17:45:54] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.374021530151367, 6: 0.0}
+[17:45:54] - WARNING: G9 driver not connected
+[17:45:55] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:56] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:45:58] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.380788803100586, 6: 0.0}
+[17:46:01] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.385095596313477, 6: 0.0}
+[17:46:01] - WARNING: G9 driver not connected
+[17:46:03] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.386316299438477, 6: 0.0}
+[17:46:04] - DEBUG: No connection to CCS temperature controller 1
+[17:46:04] - DEBUG: No connection to CCS temperature controller 2
+[17:46:04] - DEBUG: No connection to CCS temperature controller 3
+[17:46:05] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:07] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.390012741088867, 6: 0.0}
+[17:46:07] - WARNING: G9 driver not connected
+[17:46:10] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.389400482177734, 6: 0.0}
+[17:46:11] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:13] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.409053802490234, 6: 0.0}
+[17:46:14] - WARNING: G9 driver not connected
+[17:46:16] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.487648010253906, 6: 0.0}
+[17:46:16] - DEBUG: No connection to CCS temperature controller 1
+[17:46:16] - DEBUG: No connection to CCS temperature controller 2
+[17:46:16] - DEBUG: No connection to CCS temperature controller 3
+[17:46:18] - ERROR: Return message is an Error: Unit - 2 val -0.0
+[17:46:19] - ERROR: Return message is an Error: Unit - 4 val -0.0
+[17:46:19] - ERROR: Return message is an Error: Unit - 5 val -0.0
+{1: 0.0, 2: -1, 3: 0.0, 4: -1, 5: -1, 6: 0.0}
+[17:46:19] - WARNING: G9 driver not connected
+[17:46:20] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:22] - ERROR: Return message is an Error: Unit - 4 val -26.12721061706543
+{1: 0.0, 2: 0.0, 3: 26.12721061706543, 4: -1, 5: 25.479663848876953, 6: 0.0}
+[17:46:25] - ERROR: Return message is an Error: Unit - 4 val -26.125972747802734
+{1: 0.0, 2: 0.0, 3: 26.125972747802734, 4: -1, 5: 25.469219207763672, 6: 0.0}
+[17:46:26] - WARNING: G9 driver not connected
+[17:46:28] - ERROR: Return message is an Error: Unit - 4 val -26.12413787841797
+[17:46:29] - ERROR: Return message is an Error: Unit - 5 val -26.12413787841797
+[17:46:30] - ERROR: Return message is an Error: Unit - 6 val -26.12413787841797
+{1: 0.0, 2: 0.0, 3: 26.12413787841797, 4: -1, 5: -1, 6: -1}
+[17:46:30] - DEBUG: No connection to CCS temperature controller 1
+[17:46:30] - DEBUG: No connection to CCS temperature controller 2
+[17:46:30] - DEBUG: No connection to CCS temperature controller 3
+[17:46:31] - WARNING: G9 driver not connected
+[17:46:32] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:34] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:36] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:36] - WARNING: G9 driver not connected
+[17:46:38] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:39] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:41] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:41] - DEBUG: No connection to CCS temperature controller 1
+[17:46:41] - DEBUG: No connection to CCS temperature controller 2
+[17:46:41] - DEBUG: No connection to CCS temperature controller 3
+[17:46:41] - WARNING: G9 driver not connected
+[17:46:43] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:45] - ERROR: Return message is an Error: Unit - 4 val -0.0
+{1: 0.0, 2: 0.0, 3: 0.0, 4: -1, 5: 25.26779556274414, 6: 0.0}
+[17:46:46] - WARNING: G9 driver not connected
+[17:46:48] - ERROR: Return message is an Error: Unit - 4 val -26.041810989379883
+{1: 0.0, 2: 0.0, 3: 26.041810989379883, 4: -1, 5: 25.455097198486328, 6: 0.0}
+[17:46:51] - ERROR: Return message is an Error: Unit - 4 val -26.033843994140625
+{1: 0.0, 2: 0.0, 3: 26.033843994140625, 4: -1, 5: 25.460622787475586, 6: 0.0}
+[17:46:51] - DEBUG: No connection to CCS temperature controller 1
+[17:46:51] - DEBUG: No connection to CCS temperature controller 2
+[17:46:51] - DEBUG: No connection to CCS temperature controller 3
+[17:46:51] - WARNING: G9 driver not connected
+[17:46:54] - ERROR: Return message is an Error: Unit - 4 val -26.025226593017578
+{1: 0.0, 2: 0.0, 3: 26.025226593017578, 4: -1, 5: 25.46369171142578, 6: 0.0}
+[17:46:55] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:56] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:46:58] - ERROR: Return message is an Error: Unit - 4 val -25.999439239501953
+{1: 0.0, 2: 0.0, 3: 25.999439239501953, 4: -1, 5: 25.46430206298828, 6: 0.0}
+[17:46:58] - WARNING: G9 driver not connected
+[17:47:01] - ERROR: Return message is an Error: Unit - 4 val -25.984071731567383
+{1: 0.0, 2: 0.0, 3: 25.984071731567383, 4: -1, 5: 25.46491241455078, 6: 0.0}
+[17:47:02] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:47:02] - DEBUG: No connection to CCS temperature controller 1
+[17:47:02] - DEBUG: No connection to CCS temperature controller 2
+[17:47:02] - DEBUG: No connection to CCS temperature controller 3
+[17:47:04] - ERROR: Return message is an Error: Unit - 4 val -25.96318244934082
+{1: 0.0, 2: 0.0, 3: 25.96318244934082, 4: -1, 5: 25.466760635375977, 6: 0.0}
+[17:47:05] - WARNING: G9 driver not connected
+[17:47:06] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:47:07] - ERROR: Return message is an Error: Unit - 2 val -0.0
+[17:47:08] - ERROR: Return message is an Error: Unit - 4 val -25.952146530151367
+{1: 0.0, 2: -1, 3: 25.952146530151367, 4: -1, 5: 25.470458984375, 6: 0.0}
+[17:47:11] - ERROR: Return message is an Error: Unit - 4 val -25.94598960876465
+[17:47:11] - ERROR: Return message is an Error: Unit - 5 val -25.94598960876465
+{1: 0.0, 2: 0.0, 3: 25.94598960876465, 4: -1, 5: -1, 6: 0.0}
+[17:47:11] - WARNING: G9 driver not connected
+[17:47:13] - ERROR: Return message is an Error: Unit - 4 val -25.950298309326172
+{1: 0.0, 2: 0.0, 3: 25.950298309326172, 4: -1, 5: 25.49317741394043, 6: 0.0}
+[17:47:14] - DEBUG: No connection to CCS temperature controller 1
+[17:47:14] - DEBUG: No connection to CCS temperature controller 2
+[17:47:14] - DEBUG: No connection to CCS temperature controller 3
+[17:47:16] - ERROR: Return message is an Error: Unit - 4 val -25.960113525390625
+{1: 0.0, 2: 0.0, 3: 25.960113525390625, 4: -1, 5: 25.495025634765625, 6: 0.0}
+[17:47:17] - WARNING: G9 driver not connected
+[17:47:17] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:47:18] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:47:21] - ERROR: Return message is an Error: Unit - 4 val -25.960113525390625
+{1: 0.0, 2: 0.0, 3: 25.960113525390625, 4: -1, 5: 25.46369171142578, 6: 0.0}
+[17:47:22] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:47:22] - WARNING: G9 driver not connected
+[17:47:24] - ERROR: Return message is an Error: Unit - 4 val -25.960113525390625
+{1: 0.0, 2: 0.0, 3: 25.960113525390625, 4: -1, 5: 25.45938491821289, 6: 0.0}
+[17:47:24] - DEBUG: No connection to CCS temperature controller 1
+[17:47:24] - DEBUG: No connection to CCS temperature controller 2
+[17:47:25] - DEBUG: No connection to CCS temperature controller 3
+[17:47:25] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+[17:47:26] - ERROR: Communication error: cannot access local variable 'value' where it is not associated with a value
+{}
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-08_19-08-52.txt b/EBEAM-Dashboard-Logs/log_2024-12-08_19-08-52.txt
new file mode 100644
index 00000000..2f9efea9
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-08_19-08-52.txt
@@ -0,0 +1,102 @@
+[19:08:18] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[19:08:21] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:22] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:23] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:23] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.50634765625, 4: -1, 5: 26.877044677734375, 6: -1}
+[19:08:23] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[19:08:23] - INFO: G9 driver initialized
+[19:08:24] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[19:08:24] - ERROR: Failed to connect to the E5CN Modbus device.
+[19:08:24] - ERROR: Cannot start reading temperatures - connection failed
+[19:08:24] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[19:08:24] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[19:08:24] - DEBUG: Raw command sent: SABC3
+[19:08:24] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[19:08:24] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[19:08:24] - DEBUG: Raw command sent: SABC3
+[19:08:24] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[19:08:24] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[19:08:24] - DEBUG: Raw command sent: SABC3
+[19:08:24] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[19:08:24] - DEBUG: Power supply 1 not initialized. Button disabled.
+[19:08:24] - DEBUG: Power supply 2 not initialized. Button disabled.
+[19:08:24] - DEBUG: Power supply 3 not initialized. Button disabled.
+[19:08:24] - DEBUG: No power supplies were initialized properly.
+[19:08:24] - DEBUG: No connection to CCS temperature controller 1
+[19:08:24] - DEBUG: No connection to CCS temperature controller 2
+[19:08:24] - DEBUG: No connection to CCS temperature controller 3
+[19:08:24] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:24] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:25] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:26] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.497127532958984, 4: -1, 5: 26.884401321411133, 6: -1}
+[19:08:26] - WARNING: G9 driver not connected
+[19:08:27] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:27] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:28] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:28] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.492839813232422, 4: -1, 5: 26.87826156616211, 6: -1}
+[19:08:28] - WARNING: G9 driver not connected
+[19:08:29] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:29] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:30] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:31] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.47994041442871, 4: -1, 5: 26.88625144958496, 6: -1}
+[19:08:31] - WARNING: G9 driver not connected
+[19:08:31] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:32] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:33] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:33] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.481788635253906, 4: -1, 5: 26.88993263244629, 6: -1}
+[19:08:34] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:34] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:35] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:35] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.475650787353516, 4: -1, 5: 26.898550033569336, 6: -1}
+[19:08:35] - DEBUG: No connection to CCS temperature controller 1
+[19:08:36] - DEBUG: No connection to CCS temperature controller 2
+[19:08:36] - DEBUG: No connection to CCS temperature controller 3
+[19:08:36] - WARNING: G9 driver not connected
+[19:08:36] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:37] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:37] - ERROR: Return message from unit indicating error status: unit - 3
+[19:08:37] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:38] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: -1, 4: -1, 5: 26.9046688079834, 6: -1}
+[19:08:39] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:39] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:40] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:40] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.465824127197266, 4: -1, 5: 26.91514015197754, 6: -1}
+[19:08:41] - WARNING: G9 driver not connected
+[19:08:41] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:41] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:42] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:43] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.463361740112305, 4: -1, 5: 26.900989532470703, 6: -1}
+[19:08:43] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:44] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:45] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:45] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.465824127197266, 4: -1, 5: 26.89670181274414, 6: -1}
+[19:08:46] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:46] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:47] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:48] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.460905075073242, 4: -1, 5: 26.90591049194336, 6: -1}
+[19:08:48] - WARNING: G9 driver not connected
+[19:08:48] - DEBUG: No connection to CCS temperature controller 1
+[19:08:48] - DEBUG: No connection to CCS temperature controller 2
+[19:08:48] - DEBUG: No connection to CCS temperature controller 3
+[19:08:48] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:49] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:49] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:50] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.45046615600586, 4: -1, 5: 26.874582290649414, 6: -1}
+[19:08:51] - ERROR: Return message from unit indicating error status: unit - 1
+[19:08:51] - ERROR: Return message from unit indicating error status: unit - 2
+[19:08:52] - ERROR: Return message from unit indicating error status: unit - 4
+[19:08:52] - ERROR: Return message from unit indicating error status: unit - 6
+{1: -1, 2: -1, 3: 24.45046615600586, 4: -1, 5: 26.885013580322266, 6: -1}
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-08_21-18-37.txt b/EBEAM-Dashboard-Logs/log_2024-12-08_21-18-37.txt
new file mode 100644
index 00000000..7598c359
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-08_21-18-37.txt
@@ -0,0 +1,71 @@
+[21:17:01] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[21:17:32] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[21:17:32] - INFO: G9 driver initialized
+[21:17:32] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[21:17:32] - ERROR: Failed to connect to the E5CN Modbus device.
+[21:17:32] - ERROR: Cannot start reading temperatures - connection failed
+[21:17:32] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[21:17:32] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[21:17:32] - DEBUG: Raw command sent: SABC3
+[21:17:32] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[21:17:32] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[21:17:32] - DEBUG: Raw command sent: SABC3
+[21:17:32] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[21:17:32] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[21:17:32] - DEBUG: Raw command sent: SABC3
+[21:17:32] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[21:17:32] - DEBUG: Power supply 1 not initialized. Button disabled.
+[21:17:32] - DEBUG: Power supply 2 not initialized. Button disabled.
+[21:17:32] - DEBUG: Power supply 3 not initialized. Button disabled.
+[21:17:32] - DEBUG: No power supplies were initialized properly.
+[21:17:32] - DEBUG: No connection to CCS temperature controller 1
+[21:17:32] - DEBUG: No connection to CCS temperature controller 2
+[21:17:32] - DEBUG: No connection to CCS temperature controller 3
+[21:17:32] - WARNING: G9 driver not connected
+[21:17:33] - WARNING: G9 driver not connected
+[21:17:35] - WARNING: G9 driver not connected
+[21:17:36] - ERROR: Missed package on unit - 3
+[21:17:38] - ERROR: Missed package on unit - 3
+[21:17:39] - WARNING: G9 driver not connected
+[21:17:43] - ERROR: Missed package on unit - 3
+[21:17:43] - DEBUG: No connection to CCS temperature controller 1
+[21:17:43] - DEBUG: No connection to CCS temperature controller 2
+[21:17:43] - DEBUG: No connection to CCS temperature controller 3
+[21:17:44] - ERROR: Missed package on unit - 3
+[21:17:44] - WARNING: G9 driver not connected
+[21:17:49] - WARNING: G9 driver not connected
+[21:17:53] - DEBUG: No connection to CCS temperature controller 1
+[21:17:53] - DEBUG: No connection to CCS temperature controller 2
+[21:17:53] - DEBUG: No connection to CCS temperature controller 3
+[21:17:54] - WARNING: G9 driver not connected
+[21:17:56] - ERROR: Missed package on unit - 5
+[21:17:59] - WARNING: G9 driver not connected
+[21:18:03] - DEBUG: No connection to CCS temperature controller 1
+[21:18:03] - DEBUG: No connection to CCS temperature controller 2
+[21:18:03] - DEBUG: No connection to CCS temperature controller 3
+[21:18:05] - WARNING: G9 driver not connected
+[21:18:05] - ERROR: Missed package on unit - 3
+[21:18:05] - ERROR: Missed package on unit - 3
+[21:18:08] - ERROR: Missed package on unit - 3
+[21:18:10] - WARNING: G9 driver not connected
+[21:18:13] - DEBUG: No connection to CCS temperature controller 1
+[21:18:13] - DEBUG: No connection to CCS temperature controller 2
+[21:18:13] - DEBUG: No connection to CCS temperature controller 3
+[21:18:15] - WARNING: G9 driver not connected
+[21:18:20] - WARNING: G9 driver not connected
+[21:18:23] - DEBUG: No connection to CCS temperature controller 1
+[21:18:23] - DEBUG: No connection to CCS temperature controller 2
+[21:18:23] - DEBUG: No connection to CCS temperature controller 3
+[21:18:24] - ERROR: Missed package on unit - 3
+[21:18:25] - WARNING: G9 driver not connected
+[21:18:25] - ERROR: Missed package on unit - 5
+[21:18:30] - WARNING: G9 driver not connected
+[21:18:30] - ERROR: Missed package on unit - 3
+[21:18:32] - ERROR: Missed package on unit - 3
+[21:18:33] - ERROR: Missed package on unit - 5
+[21:18:34] - DEBUG: No connection to CCS temperature controller 1
+[21:18:34] - DEBUG: No connection to CCS temperature controller 2
+[21:18:34] - DEBUG: No connection to CCS temperature controller 3
+[21:18:35] - WARNING: G9 driver not connected
+[21:18:36] - ERROR: Missed package on unit - 3
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-08_21-24-22.txt b/EBEAM-Dashboard-Logs/log_2024-12-08_21-24-22.txt
new file mode 100644
index 00000000..1b53010e
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-08_21-24-22.txt
@@ -0,0 +1,28 @@
+[21:23:46] - WARNING: G9 driver not connected
+[21:23:47] - ERROR: Missed package on unit - 5
+[21:23:47] - ERROR: Missed package on unit - 3
+[21:23:51] - WARNING: G9 driver not connected
+[21:23:52] - ERROR: Missed package on unit - 3
+[21:23:53] - DEBUG: No connection to CCS temperature controller 3
+[21:23:54] - DEBUG: No connection to CCS temperature controller 1
+[21:23:54] - DEBUG: No connection to CCS temperature controller 2
+[21:23:56] - WARNING: G9 driver not connected
+[21:24:01] - WARNING: G9 driver not connected
+[21:24:02] - ERROR: Missed package on unit - 5
+[21:24:03] - DEBUG: No connection to CCS temperature controller 3
+[21:24:03] - ERROR: Missed package on unit - 5
+[21:24:04] - ERROR: Missed package on unit - 5
+[21:24:04] - DEBUG: No connection to CCS temperature controller 1
+[21:24:04] - DEBUG: No connection to CCS temperature controller 2
+[21:24:06] - WARNING: G9 driver not connected
+[21:24:07] - ERROR: Missed package on unit - 3
+[21:24:11] - WARNING: G9 driver not connected
+[21:24:13] - DEBUG: No connection to CCS temperature controller 3
+[21:24:13] - ERROR: Missed package on unit - 5
+[21:24:14] - DEBUG: No connection to CCS temperature controller 1
+[21:24:14] - DEBUG: No connection to CCS temperature controller 2
+[21:24:16] - WARNING: G9 driver not connected
+[21:24:17] - ERROR: Missed package on unit - 5
+[21:24:20] - ERROR: Missed package on unit - 3
+[21:24:21] - WARNING: G9 driver not connected
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-09_16-29-30.txt b/EBEAM-Dashboard-Logs/log_2024-12-09_16-29-30.txt
new file mode 100644
index 00000000..2a4a290e
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-09_16-29-30.txt
@@ -0,0 +1,35 @@
+[16:29:16] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:29:17] - INFO: Configuration successful for DP16 unit 1
+[16:29:17] - INFO: Configuration successful for DP16 unit 2
+[16:29:17] - INFO: Configuration successful for DP16 unit 3
+[16:29:18] - INFO: Configuration successful for DP16 unit 4
+[16:29:18] - INFO: Configuration successful for DP16 unit 5
+[16:29:18] - INFO: Configuration successful for DP16 unit 6
+[16:29:20] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:29:20] - INFO: G9 driver initialized
+[16:29:20] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[16:29:20] - ERROR: Failed to connect to the E5CN Modbus device.
+[16:29:20] - ERROR: Cannot start reading temperatures - connection failed
+[16:29:20] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[16:29:20] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:29:20] - DEBUG: Raw command sent: SABC3
+[16:29:20] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[16:29:20] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:29:20] - DEBUG: Raw command sent: SABC3
+[16:29:20] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[16:29:20] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:29:20] - DEBUG: Raw command sent: SABC3
+[16:29:20] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[16:29:20] - DEBUG: Power supply 1 not initialized. Button disabled.
+[16:29:20] - DEBUG: Power supply 2 not initialized. Button disabled.
+[16:29:20] - DEBUG: Power supply 3 not initialized. Button disabled.
+[16:29:20] - DEBUG: No power supplies were initialized properly.
+[16:29:20] - DEBUG: No connection to CCS temperature controller 1
+[16:29:20] - DEBUG: No connection to CCS temperature controller 2
+[16:29:20] - DEBUG: No connection to CCS temperature controller 3
+[16:29:21] - WARNING: G9 driver not connected
+[16:29:20] - ERROR: Communication error: main thread is not in main loop
+[16:29:22] - WARNING: G9 driver not connected
+[16:29:24] - WARNING: G9 driver not connected
+[16:29:28] - WARNING: G9 driver not connected
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-09_17-04-19.txt b/EBEAM-Dashboard-Logs/log_2024-12-09_17-04-19.txt
new file mode 100644
index 00000000..a7cf0f39
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-09_17-04-19.txt
@@ -0,0 +1,43 @@
+[17:03:54] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:03:55] - INFO: Configuration successful for DP16 unit 3
+herer
+[17:03:56] - INFO: Configuration successful for DP16 unit 4
+herer
+[17:03:56] - ERROR: Failed to write RDGCNF_REG for unit 5. Response:Modbus Error: [Input/Output] Modbus Error: [Invalid Message] Incomplete message received, expected at least 4 bytes (1 received)
+herer
+[17:03:57] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:03:57] - INFO: G9 driver initialized
+[17:03:58] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[17:03:58] - ERROR: Failed to connect to the E5CN Modbus device.
+[17:03:58] - ERROR: Cannot start reading temperatures - connection failed
+[17:03:58] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[17:03:58] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:03:58] - DEBUG: Raw command sent: SABC3
+[17:03:58] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[17:03:58] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:03:58] - DEBUG: Raw command sent: SABC3
+[17:03:58] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[17:03:58] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:03:58] - DEBUG: Raw command sent: SABC3
+[17:03:58] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[17:03:58] - DEBUG: Power supply 1 not initialized. Button disabled.
+[17:03:58] - DEBUG: Power supply 2 not initialized. Button disabled.
+[17:03:58] - DEBUG: Power supply 3 not initialized. Button disabled.
+[17:03:58] - DEBUG: No power supplies were initialized properly.
+[17:03:58] - DEBUG: No connection to CCS temperature controller 1
+[17:03:58] - DEBUG: No connection to CCS temperature controller 2
+[17:03:58] - DEBUG: No connection to CCS temperature controller 3
+[17:03:58] - WARNING: G9 driver not connected
+[17:03:57] - ERROR: Communication error: main thread is not in main loop
+[17:03:59] - WARNING: G9 driver not connected
+[17:04:01] - WARNING: G9 driver not connected
+[17:04:05] - WARNING: G9 driver not connected
+[17:04:08] - DEBUG: No connection to CCS temperature controller 1
+[17:04:08] - DEBUG: No connection to CCS temperature controller 2
+[17:04:08] - DEBUG: No connection to CCS temperature controller 3
+[17:04:10] - WARNING: G9 driver not connected
+[17:04:15] - WARNING: G9 driver not connected
+[17:04:18] - DEBUG: No connection to CCS temperature controller 2
+[17:04:18] - DEBUG: No connection to CCS temperature controller 3
+[17:04:19] - DEBUG: No connection to CCS temperature controller 1
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-09_17-08-01.txt b/EBEAM-Dashboard-Logs/log_2024-12-09_17-08-01.txt
new file mode 100644
index 00000000..eefa862d
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-09_17-08-01.txt
@@ -0,0 +1,38 @@
+[17:07:46] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:07:47] - INFO: Configuration successful for DP16 unit 3
+herer
+[17:07:47] - INFO: Configuration successful for DP16 unit 4
+herer
+[17:07:48] - ERROR: Failed to write RDGCNF_REG for unit 5. Response:Modbus Error: [Input/Output] Modbus Error: [Invalid Message] Incomplete message received, expected at least 4 bytes (2 received)
+herer
+[17:07:49] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:07:49] - INFO: G9 driver initialized
+[17:07:50] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[17:07:50] - ERROR: Failed to connect to the E5CN Modbus device.
+[17:07:50] - ERROR: Cannot start reading temperatures - connection failed
+[17:07:50] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[17:07:50] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:07:50] - DEBUG: Raw command sent: SABC3
+[17:07:50] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[17:07:50] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:07:50] - DEBUG: Raw command sent: SABC3
+[17:07:50] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[17:07:50] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:07:50] - DEBUG: Raw command sent: SABC3
+[17:07:50] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[17:07:50] - DEBUG: Power supply 1 not initialized. Button disabled.
+[17:07:50] - DEBUG: Power supply 2 not initialized. Button disabled.
+[17:07:50] - DEBUG: Power supply 3 not initialized. Button disabled.
+[17:07:50] - DEBUG: No power supplies were initialized properly.
+[17:07:50] - DEBUG: No connection to CCS temperature controller 1
+[17:07:50] - DEBUG: No connection to CCS temperature controller 2
+[17:07:50] - DEBUG: No connection to CCS temperature controller 3
+[17:07:50] - WARNING: G9 driver not connected
+[17:07:49] - ERROR: Communication error: main thread is not in main loop
+[17:07:51] - WARNING: G9 driver not connected
+[17:07:53] - WARNING: G9 driver not connected
+[17:07:57] - WARNING: G9 driver not connected
+[17:08:00] - DEBUG: No connection to CCS temperature controller 1
+[17:08:00] - DEBUG: No connection to CCS temperature controller 2
+[17:08:00] - DEBUG: No connection to CCS temperature controller 3
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-09_17-10-43.txt b/EBEAM-Dashboard-Logs/log_2024-12-09_17-10-43.txt
new file mode 100644
index 00000000..a8d7f20d
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-09_17-10-43.txt
@@ -0,0 +1,40 @@
+[17:10:23] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:10:24] - INFO: Configuration successful for DP16 unit 3
+herer
+[17:10:24] - INFO: Configuration successful for DP16 unit 4
+herer
+[17:10:24] - INFO: Configuration successful for DP16 unit 5
+herer
+[17:10:25] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:10:25] - INFO: G9 driver initialized
+[17:10:26] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[17:10:26] - ERROR: Failed to connect to the E5CN Modbus device.
+[17:10:26] - ERROR: Cannot start reading temperatures - connection failed
+[17:10:26] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[17:10:26] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:10:26] - DEBUG: Raw command sent: SABC3
+[17:10:26] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[17:10:26] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:10:26] - DEBUG: Raw command sent: SABC3
+[17:10:26] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[17:10:26] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:10:26] - DEBUG: Raw command sent: SABC3
+[17:10:26] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[17:10:26] - DEBUG: Power supply 1 not initialized. Button disabled.
+[17:10:26] - DEBUG: Power supply 2 not initialized. Button disabled.
+[17:10:26] - DEBUG: Power supply 3 not initialized. Button disabled.
+[17:10:26] - DEBUG: No power supplies were initialized properly.
+[17:10:26] - DEBUG: No connection to CCS temperature controller 1
+[17:10:26] - DEBUG: No connection to CCS temperature controller 2
+[17:10:26] - DEBUG: No connection to CCS temperature controller 3
+[17:10:26] - WARNING: G9 driver not connected
+[17:10:25] - ERROR: Communication error: main thread is not in main loop
+[17:10:27] - WARNING: G9 driver not connected
+[17:10:29] - WARNING: G9 driver not connected
+[17:10:33] - WARNING: G9 driver not connected
+[17:10:37] - DEBUG: No connection to CCS temperature controller 1
+[17:10:37] - DEBUG: No connection to CCS temperature controller 2
+[17:10:37] - DEBUG: No connection to CCS temperature controller 3
+[17:10:38] - WARNING: G9 driver not connected
+[17:10:43] - WARNING: G9 driver not connected
+
diff --git a/EBEAM-Dashboard-Logs/log_2024-12-09_17-13-14.txt b/EBEAM-Dashboard-Logs/log_2024-12-09_17-13-14.txt
new file mode 100644
index 00000000..2f0035e2
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/log_2024-12-09_17-13-14.txt
@@ -0,0 +1,38 @@
+[17:12:58] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:12:59] - INFO: Configuration successful for DP16 unit 3
+herer
+[17:12:59] - INFO: Configuration successful for DP16 unit 4
+herer
+[17:12:59] - INFO: Configuration successful for DP16 unit 5
+herer
+[17:13:01] - ERROR: Failed to open serial port DUMMY_COM6: could not open port 'DUMMY_COM6': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:13:01] - INFO: G9 driver initialized
+[17:13:01] - DEBUG: Initializing E5CNModbus with port: DUMMY_COM5
+[17:13:01] - ERROR: Failed to connect to the E5CN Modbus device.
+[17:13:01] - ERROR: Cannot start reading temperatures - connection failed
+[17:13:01] - ERROR: Failed to start temperature controllers at DUMMY_COM5
+[17:13:01] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:13:01] - DEBUG: Raw command sent: SABC3
+[17:13:01] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[17:13:01] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:13:01] - DEBUG: Raw command sent: SABC3
+[17:13:01] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[17:13:01] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[17:13:01] - DEBUG: Raw command sent: SABC3
+[17:13:01] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[17:13:01] - DEBUG: Power supply 1 not initialized. Button disabled.
+[17:13:01] - DEBUG: Power supply 2 not initialized. Button disabled.
+[17:13:01] - DEBUG: Power supply 3 not initialized. Button disabled.
+[17:13:01] - DEBUG: No power supplies were initialized properly.
+[17:13:01] - DEBUG: No connection to CCS temperature controller 1
+[17:13:01] - DEBUG: No connection to CCS temperature controller 2
+[17:13:02] - DEBUG: No connection to CCS temperature controller 3
+[17:13:02] - WARNING: G9 driver not connected
+[17:13:01] - ERROR: Communication error: main thread is not in main loop
+[17:13:03] - WARNING: G9 driver not connected
+[17:13:05] - WARNING: G9 driver not connected
+[17:13:09] - WARNING: G9 driver not connected
+[17:13:12] - DEBUG: No connection to CCS temperature controller 1
+[17:13:12] - DEBUG: No connection to CCS temperature controller 2
+[17:13:12] - DEBUG: No connection to CCS temperature controller 3
+
diff --git a/EBEAM-Dashboard-Logs/usb_disconnect_log.txt b/EBEAM-Dashboard-Logs/usb_disconnect_log.txt
new file mode 100644
index 00000000..36cb9f86
--- /dev/null
+++ b/EBEAM-Dashboard-Logs/usb_disconnect_log.txt
@@ -0,0 +1,1007 @@
+[16:12:30] - ERROR: Error opening serial port DUMMY_COM1: could not open port 'DUMMY_COM1': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:12:31] - INFO: Serial connection established on COM11
+[16:12:31] - INFO: G9 driver initialized
+[16:12:31] - ERROR: Exception while initializing temperature controllers at DUMMY_COM5: 'ModbusSerialClient' object has no attribute 'port'
+[16:12:31] - ERROR: Error opening serial port DUMMY_COM2: could not open port 'DUMMY_COM2': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:12:31] - DEBUG: Raw command sent: SABC3
+[16:12:31] - ERROR: Failed to initialize CathodeA PS on port DUMMY_COM2: 'NoneType' object has no attribute 'write'
+[16:12:31] - ERROR: Error opening serial port DUMMY_COM3: could not open port 'DUMMY_COM3': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:12:31] - DEBUG: Raw command sent: SABC3
+[16:12:31] - ERROR: Failed to initialize CathodeB PS on port DUMMY_COM3: 'NoneType' object has no attribute 'write'
+[16:12:31] - ERROR: Error opening serial port DUMMY_COM4: could not open port 'DUMMY_COM4': FileNotFoundError(2, 'The system cannot find the file specified.', None, 2)
+[16:12:31] - DEBUG: Raw command sent: SABC3
+[16:12:31] - ERROR: Failed to initialize CathodeC PS on port DUMMY_COM4: 'NoneType' object has no attribute 'write'
+[16:12:31] - DEBUG: Power supply 1 not initialized. Button disabled.
+[16:12:32] - DEBUG: Power supply 2 not initialized. Button disabled.
+[16:12:32] - DEBUG: Power supply 3 not initialized. Button disabled.
+[16:12:32] - DEBUG: No power supplies were initialized properly.
+[16:12:32] - DEBUG: No connection to CCS temperature controller 1
+[16:12:32] - DEBUG: No connection to CCS temperature controller 2
+[16:12:32] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[16:12:32] - INFO: Interlock E-STOP Int: red -> green
+[16:12:32] - INFO: Interlock E-STOP Ext: red -> green
+[16:12:32] - INFO: Interlock Door: red -> green
+[16:12:32] - INFO: Interlock Vacuum Power: red -> green
+[16:12:32] - INFO: Interlock Vacuum Pressure: red -> green
+[16:12:32] - INFO: Interlock High Oil: red -> green
+[16:12:32] - INFO: Interlock Low Oil: red -> green
+[16:12:32] - INFO: Interlock Water: red -> green
+[16:12:32] - INFO: Interlock HVolt ON: red -> green
+[16:12:32] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[1, 0, 1, 0, 0, 0, 1]
+[16:12:37] - INFO: Interlock E-STOP Int: green -> red
+[16:12:37] - INFO: Interlock All Interlocks: green -> red
+[0, 0, 1, 0, 0, 1, 0]
+[16:12:38] - INFO: Interlock E-STOP Int: red -> green
+[16:12:38] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[1, 0, 1, 0, 0, 0, 1]
+[16:12:40] - INFO: Interlock E-STOP Int: green -> red
+[16:12:40] - INFO: Interlock All Interlocks: green -> red
+[0, 0, 1, 0, 0, 1, 0]
+[16:12:40] - INFO: Interlock E-STOP Int: red -> green
+[16:12:40] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:12:42] - DEBUG: No connection to CCS temperature controller 1
+[16:12:42] - DEBUG: No connection to CCS temperature controller 2
+[16:12:42] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[1, 0, 1, 0, 0, 0, 1]
+[16:12:44] - INFO: Interlock E-STOP Int: green -> red
+[16:12:44] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[0, 0, 1, 0, 0, 1, 0]
+[16:12:49] - INFO: Interlock E-STOP Int: red -> green
+[16:12:49] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:12:51] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:12:52] - INFO: Interlock G9SP Active: green -> red
+[16:12:52] - INFO: Interlock G9SP Active: red -> green
+[16:12:52] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:12:53] - INFO: Interlock G9SP Active: green -> red
+[16:12:53] - INFO: Interlock G9SP Active: red -> green
+[16:12:53] - DEBUG: No connection to CCS temperature controller 2
+[16:12:53] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[0, 0, 1, 0, 1, 1, 0]
+[16:12:54] - INFO: Interlock G9SP Active: green -> red
+[16:12:54] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:12:55] - INFO: Interlock G9SP Active: green -> red
+[16:12:55] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:12:56] - INFO: Interlock G9SP Active: green -> red
+[16:12:56] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:12:57] - INFO: Interlock G9SP Active: green -> red
+[16:12:57] - INFO: Interlock G9SP Active: red -> green
+[1, 0, 1, 0, 0, 0, 1]
+[16:12:57] - INFO: Interlock E-STOP Int: green -> red
+[16:12:57] - INFO: Interlock G9SP Active: green -> red
+[16:12:57] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:02] - INFO: Interlock E-STOP Int: red -> green
+[16:13:02] - INFO: Interlock All Interlocks: red -> green
+[16:13:02] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:03] - DEBUG: No connection to CCS temperature controller 2
+[16:13:03] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:12] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:13] - DEBUG: No connection to CCS temperature controller 2
+[16:13:13] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:22] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:23] - DEBUG: No connection to CCS temperature controller 2
+[16:13:23] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:32] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:33] - DEBUG: No connection to CCS temperature controller 2
+[16:13:33] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[1, 0, 1, 0, 0, 0, 1]
+[16:13:36] - INFO: Interlock E-STOP Int: green -> red
+[16:13:36] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:13:42] - DEBUG: No connection to CCS temperature controller 1
+[1, 0, 1, 0, 0, 0, 1]
+[16:13:43] - DEBUG: No connection to CCS temperature controller 2
+[16:13:43] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[16:13:44] - INFO: Interlock E-STOP Int: red -> green
+[16:13:44] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:49] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:49] - INFO: Interlock G9SP Active: green -> red
+[16:13:49] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:50] - INFO: Interlock G9SP Active: green -> red
+[16:13:50] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:51] - INFO: Interlock G9SP Active: green -> red
+[16:13:51] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:52] - INFO: Interlock G9SP Active: green -> red
+[16:13:52] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:52] - INFO: Interlock G9SP Active: green -> red
+[16:13:52] - INFO: Interlock G9SP Active: red -> green
+[16:13:52] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:53] - INFO: Interlock G9SP Active: green -> red
+[16:13:53] - INFO: Interlock G9SP Active: red -> green
+[16:13:53] - DEBUG: No connection to CCS temperature controller 2
+[16:13:53] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:54] - INFO: Interlock G9SP Active: green -> red
+[16:13:54] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:55] - INFO: Interlock G9SP Active: green -> red
+[16:13:55] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:56] - INFO: Interlock G9SP Active: green -> red
+[16:13:56] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:56] - INFO: Interlock G9SP Active: green -> red
+[16:13:56] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:57] - INFO: Interlock G9SP Active: green -> red
+[16:13:57] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:58] - INFO: Interlock G9SP Active: green -> red
+[16:13:58] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:13:59] - INFO: Interlock G9SP Active: green -> red
+[16:13:59] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:00] - INFO: Interlock G9SP Active: green -> red
+[16:14:00] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:00] - INFO: Interlock G9SP Active: green -> red
+[16:14:00] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:01] - INFO: Interlock G9SP Active: green -> red
+[16:14:01] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:02] - INFO: Interlock G9SP Active: green -> red
+[16:14:02] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:03] - INFO: Interlock G9SP Active: green -> red
+[16:14:03] - INFO: Interlock G9SP Active: red -> green
+[16:14:03] - DEBUG: No connection to CCS temperature controller 1
+[1, 0, 1, 0, 0, 0, 1]
+[16:14:03] - INFO: Interlock E-STOP Int: green -> red
+[16:14:03] - INFO: Interlock G9SP Active: green -> red
+[16:14:03] - INFO: Interlock All Interlocks: green -> red
+[16:14:03] - DEBUG: No connection to CCS temperature controller 2
+[16:14:04] - DEBUG: No connection to CCS temperature controller 3
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:14:13] - DEBUG: No connection to CCS temperature controller 1
+[1, 0, 1, 0, 0, 0, 1]
+[16:14:14] - DEBUG: No connection to CCS temperature controller 2
+[16:14:14] - DEBUG: No connection to CCS temperature controller 3
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[0, 0, 1, 0, 0, 1, 0]
+[16:14:17] - INFO: Interlock E-STOP Int: red -> green
+[16:14:17] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:14:20] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:21] - INFO: Interlock G9SP Active: green -> red
+[16:14:21] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:21] - INFO: Interlock G9SP Active: green -> red
+[16:14:21] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:22] - INFO: Interlock G9SP Active: green -> red
+[16:14:22] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:23] - INFO: Interlock G9SP Active: green -> red
+[16:14:23] - INFO: Interlock G9SP Active: red -> green
+[16:14:23] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:24] - INFO: Interlock G9SP Active: green -> red
+[16:14:24] - INFO: Interlock G9SP Active: red -> green
+[16:14:24] - DEBUG: No connection to CCS temperature controller 2
+[16:14:24] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:24] - INFO: Interlock G9SP Active: green -> red
+[16:14:24] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:25] - INFO: Interlock G9SP Active: green -> red
+[16:14:25] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:26] - INFO: Interlock G9SP Active: green -> red
+[16:14:26] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:27] - INFO: Interlock G9SP Active: green -> red
+[16:14:27] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:28] - INFO: Interlock G9SP Active: green -> red
+[16:14:28] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:28] - INFO: Interlock G9SP Active: green -> red
+[16:14:28] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:29] - INFO: Interlock G9SP Active: green -> red
+[16:14:29] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:30] - INFO: Interlock G9SP Active: green -> red
+[16:14:30] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:31] - INFO: Interlock G9SP Active: green -> red
+[16:14:31] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:31] - INFO: Interlock G9SP Active: green -> red
+[16:14:31] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:32] - INFO: Interlock G9SP Active: green -> red
+[16:14:32] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:33] - INFO: Interlock G9SP Active: green -> red
+[16:14:33] - INFO: Interlock G9SP Active: red -> green
+[16:14:33] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:34] - INFO: Interlock G9SP Active: green -> red
+[16:14:34] - INFO: Interlock G9SP Active: red -> green
+[16:14:34] - DEBUG: No connection to CCS temperature controller 2
+[16:14:34] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:35] - INFO: Interlock G9SP Active: green -> red
+[16:14:35] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:35] - INFO: Interlock G9SP Active: green -> red
+[16:14:35] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:36] - INFO: Interlock G9SP Active: green -> red
+[16:14:36] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:37] - INFO: Interlock G9SP Active: green -> red
+[16:14:37] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:38] - INFO: Interlock G9SP Active: green -> red
+[16:14:38] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:39] - INFO: Interlock G9SP Active: green -> red
+[16:14:39] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:39] - INFO: Interlock G9SP Active: green -> red
+[16:14:39] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:40] - INFO: Interlock G9SP Active: green -> red
+[16:14:40] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:41] - INFO: Interlock G9SP Active: green -> red
+[16:14:41] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:42] - INFO: Interlock G9SP Active: green -> red
+[16:14:42] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:42] - INFO: Interlock G9SP Active: green -> red
+[16:14:42] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:43] - INFO: Interlock G9SP Active: green -> red
+[16:14:43] - INFO: Interlock G9SP Active: red -> green
+[16:14:43] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:44] - INFO: Interlock G9SP Active: green -> red
+[16:14:44] - INFO: Interlock G9SP Active: red -> green
+[16:14:44] - DEBUG: No connection to CCS temperature controller 2
+[16:14:44] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:45] - INFO: Interlock G9SP Active: green -> red
+[16:14:45] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:46] - INFO: Interlock G9SP Active: green -> red
+[16:14:46] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:46] - INFO: Interlock G9SP Active: green -> red
+[16:14:46] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:47] - INFO: Interlock G9SP Active: green -> red
+[16:14:47] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:48] - INFO: Interlock G9SP Active: green -> red
+[16:14:48] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:49] - INFO: Interlock G9SP Active: green -> red
+[16:14:49] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:50] - INFO: Interlock G9SP Active: green -> red
+[16:14:50] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:50] - INFO: Interlock G9SP Active: green -> red
+[16:14:50] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:51] - INFO: Interlock G9SP Active: green -> red
+[16:14:51] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:52] - INFO: Interlock G9SP Active: green -> red
+[16:14:52] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:53] - INFO: Interlock G9SP Active: green -> red
+[16:14:53] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:54] - INFO: Interlock G9SP Active: green -> red
+[16:14:54] - INFO: Interlock G9SP Active: red -> green
+[16:14:54] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:54] - INFO: Interlock G9SP Active: green -> red
+[16:14:54] - INFO: Interlock G9SP Active: red -> green
+[16:14:54] - DEBUG: No connection to CCS temperature controller 2
+[16:14:54] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:55] - INFO: Interlock G9SP Active: green -> red
+[16:14:55] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:56] - INFO: Interlock G9SP Active: green -> red
+[16:14:56] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:57] - INFO: Interlock G9SP Active: green -> red
+[16:14:57] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:57] - INFO: Interlock G9SP Active: green -> red
+[16:14:57] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:58] - INFO: Interlock G9SP Active: green -> red
+[16:14:58] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:14:59] - INFO: Interlock G9SP Active: green -> red
+[16:14:59] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:00] - INFO: Interlock G9SP Active: green -> red
+[16:15:00] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:01] - INFO: Interlock G9SP Active: green -> red
+[16:15:01] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:01] - INFO: Interlock G9SP Active: green -> red
+[16:15:01] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:02] - INFO: Interlock G9SP Active: green -> red
+[16:15:02] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:03] - INFO: Interlock G9SP Active: green -> red
+[16:15:03] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:04] - INFO: Interlock G9SP Active: green -> red
+[16:15:04] - INFO: Interlock G9SP Active: red -> green
+[16:15:04] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:04] - INFO: Interlock G9SP Active: green -> red
+[16:15:04] - INFO: Interlock G9SP Active: red -> green
+[16:15:04] - DEBUG: No connection to CCS temperature controller 2
+[16:15:05] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:05] - INFO: Interlock G9SP Active: green -> red
+[16:15:05] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:06] - INFO: Interlock G9SP Active: green -> red
+[16:15:06] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:07] - INFO: Interlock G9SP Active: green -> red
+[16:15:07] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:08] - INFO: Interlock G9SP Active: green -> red
+[16:15:08] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:08] - INFO: Interlock G9SP Active: green -> red
+[16:15:08] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:09] - INFO: Interlock G9SP Active: green -> red
+[16:15:09] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:10] - INFO: Interlock G9SP Active: green -> red
+[16:15:10] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:11] - INFO: Interlock G9SP Active: green -> red
+[16:15:11] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:11] - INFO: Interlock G9SP Active: green -> red
+[16:15:11] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:12] - INFO: Interlock G9SP Active: green -> red
+[16:15:12] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:13] - INFO: Interlock G9SP Active: green -> red
+[16:15:13] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:14] - INFO: Interlock G9SP Active: green -> red
+[16:15:14] - INFO: Interlock G9SP Active: red -> green
+[16:15:14] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:15] - INFO: Interlock G9SP Active: green -> red
+[16:15:15] - INFO: Interlock G9SP Active: red -> green
+[16:15:15] - DEBUG: No connection to CCS temperature controller 2
+[16:15:15] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:15] - INFO: Interlock G9SP Active: green -> red
+[16:15:15] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:16] - INFO: Interlock G9SP Active: green -> red
+[16:15:16] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:17] - INFO: Interlock G9SP Active: green -> red
+[16:15:17] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:18] - INFO: Interlock G9SP Active: green -> red
+[16:15:18] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:18] - INFO: Interlock G9SP Active: green -> red
+[16:15:18] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:19] - INFO: Interlock G9SP Active: green -> red
+[16:15:19] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:20] - INFO: Interlock G9SP Active: green -> red
+[16:15:20] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:21] - INFO: Interlock G9SP Active: green -> red
+[16:15:21] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:21] - INFO: Interlock G9SP Active: green -> red
+[16:15:21] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:22] - INFO: Interlock G9SP Active: green -> red
+[16:15:22] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:23] - INFO: Interlock G9SP Active: green -> red
+[16:15:23] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:24] - INFO: Interlock G9SP Active: green -> red
+[16:15:24] - INFO: Interlock G9SP Active: red -> green
+[16:15:24] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:25] - INFO: Interlock G9SP Active: green -> red
+[16:15:25] - INFO: Interlock G9SP Active: red -> green
+[16:15:25] - DEBUG: No connection to CCS temperature controller 2
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:25] - INFO: Interlock G9SP Active: green -> red
+[16:15:25] - INFO: Interlock G9SP Active: red -> green
+[16:15:25] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:26] - INFO: Interlock G9SP Active: green -> red
+[16:15:26] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:27] - INFO: Interlock G9SP Active: green -> red
+[16:15:27] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:28] - INFO: Interlock G9SP Active: green -> red
+[16:15:28] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:28] - INFO: Interlock G9SP Active: green -> red
+[16:15:28] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:29] - INFO: Interlock G9SP Active: green -> red
+[16:15:29] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:30] - INFO: Interlock G9SP Active: green -> red
+[16:15:30] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:31] - INFO: Interlock G9SP Active: green -> red
+[16:15:31] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:32] - INFO: Interlock G9SP Active: green -> red
+[16:15:32] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:32] - INFO: Interlock G9SP Active: green -> red
+[16:15:32] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:33] - INFO: Interlock G9SP Active: green -> red
+[16:15:33] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:34] - INFO: Interlock G9SP Active: green -> red
+[16:15:34] - INFO: Interlock G9SP Active: red -> green
+[16:15:34] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:35] - INFO: Interlock G9SP Active: green -> red
+[16:15:35] - INFO: Interlock G9SP Active: red -> green
+[16:15:35] - DEBUG: No connection to CCS temperature controller 2
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:35] - INFO: Interlock G9SP Active: green -> red
+[16:15:35] - INFO: Interlock G9SP Active: red -> green
+[16:15:36] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:36] - INFO: Interlock G9SP Active: green -> red
+[16:15:36] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:37] - INFO: Interlock G9SP Active: green -> red
+[16:15:37] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:38] - INFO: Interlock G9SP Active: green -> red
+[16:15:38] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:39] - INFO: Interlock G9SP Active: green -> red
+[16:15:39] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:39] - INFO: Interlock G9SP Active: green -> red
+[16:15:39] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:40] - INFO: Interlock G9SP Active: green -> red
+[16:15:40] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:41] - INFO: Interlock G9SP Active: green -> red
+[16:15:41] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:42] - INFO: Interlock G9SP Active: green -> red
+[16:15:42] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:42] - INFO: Interlock G9SP Active: green -> red
+[16:15:42] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:43] - INFO: Interlock G9SP Active: green -> red
+[16:15:43] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:44] - INFO: Interlock G9SP Active: green -> red
+[16:15:44] - INFO: Interlock G9SP Active: red -> green
+[16:15:44] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:45] - INFO: Interlock G9SP Active: green -> red
+[16:15:45] - INFO: Interlock G9SP Active: red -> green
+[16:15:45] - DEBUG: No connection to CCS temperature controller 2
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:46] - INFO: Interlock G9SP Active: green -> red
+[16:15:46] - INFO: Interlock G9SP Active: red -> green
+[16:15:46] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:46] - INFO: Interlock G9SP Active: green -> red
+[16:15:46] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:47] - INFO: Interlock G9SP Active: green -> red
+[16:15:47] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:48] - INFO: Interlock G9SP Active: green -> red
+[16:15:48] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:49] - INFO: Interlock G9SP Active: green -> red
+[16:15:49] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:49] - INFO: Interlock G9SP Active: green -> red
+[16:15:49] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:50] - INFO: Interlock G9SP Active: green -> red
+[16:15:50] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:51] - INFO: Interlock G9SP Active: green -> red
+[16:15:51] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:52] - INFO: Interlock G9SP Active: green -> red
+[16:15:52] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:52] - INFO: Interlock G9SP Active: green -> red
+[16:15:52] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:53] - INFO: Interlock G9SP Active: green -> red
+[16:15:53] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:54] - INFO: Interlock G9SP Active: green -> red
+[16:15:54] - INFO: Interlock G9SP Active: red -> green
+[16:15:54] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:55] - INFO: Interlock G9SP Active: green -> red
+[16:15:55] - INFO: Interlock G9SP Active: red -> green
+[16:15:55] - DEBUG: No connection to CCS temperature controller 2
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:56] - INFO: Interlock G9SP Active: green -> red
+[16:15:56] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:56] - INFO: Interlock G9SP Active: green -> red
+[16:15:56] - INFO: Interlock G9SP Active: red -> green
+[16:15:56] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:57] - INFO: Interlock G9SP Active: green -> red
+[16:15:57] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:15:58] - INFO: Interlock G9SP Active: green -> red
+[16:15:58] - INFO: Interlock G9SP Active: red -> green
+[1, 0, 1, 0, 0, 0, 1]
+[16:15:59] - INFO: Interlock E-STOP Int: green -> red
+[16:15:59] - INFO: Interlock G9SP Active: green -> red
+[16:15:59] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[0, 0, 1, 0, 0, 1, 0]
+[16:16:03] - INFO: Interlock E-STOP Int: red -> green
+[16:16:03] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[16:16:04] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:06] - INFO: Interlock G9SP Active: red -> green
+[16:16:06] - DEBUG: No connection to CCS temperature controller 2
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:06] - INFO: Interlock G9SP Active: green -> red
+[16:16:06] - INFO: Interlock G9SP Active: red -> green
+[16:16:06] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:07] - INFO: Interlock G9SP Active: green -> red
+[16:16:07] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:08] - INFO: Interlock G9SP Active: green -> red
+[16:16:08] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:09] - INFO: Interlock G9SP Active: green -> red
+[16:16:09] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:09] - INFO: Interlock G9SP Active: green -> red
+[16:16:09] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:10] - INFO: Interlock G9SP Active: green -> red
+[16:16:10] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:11] - INFO: Interlock G9SP Active: green -> red
+[16:16:11] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:12] - INFO: Interlock G9SP Active: green -> red
+[16:16:12] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:13] - INFO: Interlock G9SP Active: green -> red
+[16:16:13] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:13] - INFO: Interlock G9SP Active: green -> red
+[16:16:13] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:14] - INFO: Interlock G9SP Active: green -> red
+[16:16:14] - INFO: Interlock G9SP Active: red -> green
+[16:16:14] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:15] - INFO: Interlock G9SP Active: green -> red
+[16:16:15] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:16] - INFO: Interlock G9SP Active: green -> red
+[16:16:16] - INFO: Interlock G9SP Active: red -> green
+[16:16:16] - DEBUG: No connection to CCS temperature controller 2
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:16] - INFO: Interlock G9SP Active: green -> red
+[16:16:16] - INFO: Interlock G9SP Active: red -> green
+[16:16:16] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:17] - INFO: Interlock G9SP Active: green -> red
+[16:16:17] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:18] - INFO: Interlock G9SP Active: green -> red
+[16:16:18] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:19] - INFO: Interlock G9SP Active: green -> red
+[16:16:19] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:19] - INFO: Interlock G9SP Active: green -> red
+[16:16:19] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:20] - INFO: Interlock G9SP Active: green -> red
+[16:16:20] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:21] - INFO: Interlock G9SP Active: green -> red
+[16:16:21] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:22] - INFO: Interlock G9SP Active: green -> red
+[16:16:22] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:23] - INFO: Interlock G9SP Active: green -> red
+[16:16:23] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:23] - INFO: Interlock G9SP Active: green -> red
+[16:16:23] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:24] - INFO: Interlock G9SP Active: green -> red
+[16:16:24] - INFO: Interlock G9SP Active: red -> green
+[16:16:24] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:25] - INFO: Interlock G9SP Active: green -> red
+[16:16:25] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:26] - INFO: Interlock G9SP Active: green -> red
+[16:16:26] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:26] - INFO: Interlock G9SP Active: green -> red
+[16:16:26] - INFO: Interlock G9SP Active: red -> green
+[16:16:26] - DEBUG: No connection to CCS temperature controller 2
+[16:16:26] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:27] - INFO: Interlock G9SP Active: green -> red
+[16:16:27] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:28] - INFO: Interlock G9SP Active: green -> red
+[16:16:28] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:29] - INFO: Interlock G9SP Active: green -> red
+[16:16:29] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:29] - INFO: Interlock G9SP Active: green -> red
+[16:16:29] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:30] - INFO: Interlock G9SP Active: green -> red
+[16:16:30] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:31] - INFO: Interlock G9SP Active: green -> red
+[16:16:31] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:32] - INFO: Interlock G9SP Active: green -> red
+[16:16:32] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:33] - INFO: Interlock G9SP Active: green -> red
+[16:16:33] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:33] - INFO: Interlock G9SP Active: green -> red
+[16:16:33] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:34] - INFO: Interlock G9SP Active: green -> red
+[16:16:34] - INFO: Interlock G9SP Active: red -> green
+[16:16:34] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:35] - INFO: Interlock G9SP Active: green -> red
+[16:16:35] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:36] - INFO: Interlock G9SP Active: green -> red
+[16:16:36] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:36] - INFO: Interlock G9SP Active: green -> red
+[16:16:36] - INFO: Interlock G9SP Active: red -> green
+[16:16:36] - DEBUG: No connection to CCS temperature controller 2
+[16:16:36] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:37] - INFO: Interlock G9SP Active: green -> red
+[16:16:37] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:38] - INFO: Interlock G9SP Active: green -> red
+[16:16:38] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:39] - INFO: Interlock G9SP Active: green -> red
+[16:16:39] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:40] - INFO: Interlock G9SP Active: green -> red
+[16:16:40] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:40] - INFO: Interlock G9SP Active: green -> red
+[16:16:40] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:41] - INFO: Interlock G9SP Active: green -> red
+[16:16:41] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:42] - INFO: Interlock G9SP Active: green -> red
+[16:16:42] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:43] - INFO: Interlock G9SP Active: green -> red
+[16:16:43] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:43] - INFO: Interlock G9SP Active: green -> red
+[16:16:43] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:44] - INFO: Interlock G9SP Active: green -> red
+[16:16:44] - INFO: Interlock G9SP Active: red -> green
+[16:16:44] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:45] - INFO: Interlock G9SP Active: green -> red
+[16:16:45] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:46] - INFO: Interlock G9SP Active: green -> red
+[16:16:46] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:47] - INFO: Interlock G9SP Active: green -> red
+[16:16:47] - INFO: Interlock G9SP Active: red -> green
+[16:16:47] - DEBUG: No connection to CCS temperature controller 2
+[16:16:47] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:16:47] - INFO: Interlock G9SP Active: green -> red
+[16:16:47] - INFO: Interlock G9SP Active: red -> green
+[1, 0, 1, 0, 0, 0, 1]
+[16:16:48] - INFO: Interlock E-STOP Int: green -> red
+[16:16:48] - INFO: Interlock G9SP Active: green -> red
+[16:16:48] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:16:54] - DEBUG: No connection to CCS temperature controller 1
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:16:57] - DEBUG: No connection to CCS temperature controller 2
+[16:16:57] - DEBUG: No connection to CCS temperature controller 3
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[0, 0, 1, 0, 0, 1, 0]
+[16:17:04] - INFO: Interlock E-STOP Int: red -> green
+[16:17:04] - INFO: Interlock All Interlocks: red -> green
+[0, 0, 1, 0, 0, 1, 0]
+[16:17:04] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:17:07] - DEBUG: No connection to CCS temperature controller 2
+[16:17:07] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[0, 0, 1, 0, 0, 1, 0]
+[16:17:12] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:17:13] - INFO: Interlock G9SP Active: green -> red
+[16:17:13] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:17:14] - INFO: Interlock G9SP Active: green -> red
+[16:17:14] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:17:14] - INFO: Interlock G9SP Active: green -> red
+[16:17:14] - INFO: Interlock G9SP Active: red -> green
+[16:17:14] - DEBUG: No connection to CCS temperature controller 1
+[0, 0, 1, 0, 1, 1, 0]
+[16:17:15] - INFO: Interlock G9SP Active: green -> red
+[16:17:15] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:17:16] - INFO: Interlock G9SP Active: green -> red
+[16:17:16] - INFO: Interlock G9SP Active: red -> green
+[0, 0, 1, 0, 1, 1, 0]
+[16:17:17] - INFO: Interlock G9SP Active: green -> red
+[16:17:17] - INFO: Interlock G9SP Active: red -> green
+[16:17:17] - DEBUG: No connection to CCS temperature controller 2
+[16:17:17] - DEBUG: No connection to CCS temperature controller 3
+[0, 0, 1, 0, 1, 1, 0]
+[16:17:17] - INFO: Interlock G9SP Active: green -> red
+[16:17:17] - INFO: Interlock G9SP Active: red -> green
+[1, 0, 1, 0, 0, 0, 1]
+[16:17:18] - INFO: Interlock E-STOP Int: green -> red
+[16:17:18] - INFO: Interlock G9SP Active: green -> red
+[16:17:18] - INFO: Interlock All Interlocks: green -> red
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:17:25] - DEBUG: No connection to CCS temperature controller 1
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:17:27] - DEBUG: No connection to CCS temperature controller 2
+[16:17:27] - DEBUG: No connection to CCS temperature controller 3
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[1, 0, 1, 0, 0, 0, 1]
+[16:17:32] - ERROR: Invalid response length: got: 83, expected 199 bytes
+[16:17:32] - ERROR: Error getting interlock status: Invalid response length: got: 83, expected 199 bytes
+[16:17:32] - ERROR: G9 communication error: Invalid response length: got: 83, expected 199 bytes
+[16:17:32] - INFO: Interlock Door: green -> red
+[16:17:32] - INFO: Interlock Water: green -> red
+[16:17:32] - INFO: Interlock Vacuum Power: green -> red
+[16:17:32] - INFO: Interlock Vacuum Pressure: green -> red
+[16:17:32] - INFO: Interlock Low Oil: green -> red
+[16:17:32] - INFO: Interlock High Oil: green -> red
+[16:17:32] - INFO: Interlock E-STOP Ext: green -> red
+[16:17:32] - INFO: Interlock HVolt ON: green -> red
+[16:17:33] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:33] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:33] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:34] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:34] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:34] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:35] - DEBUG: No connection to CCS temperature controller 1
+[16:17:36] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:36] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:36] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:38] - DEBUG: No connection to CCS temperature controller 2
+[16:17:38] - DEBUG: No connection to CCS temperature controller 3
+[16:17:38] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:38] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:38] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:38] - WARNING: G9 Connection issue. Update interval: 2530ms
+[16:17:41] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:41] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:41] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:43] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:43] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:43] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:46] - ERROR: Error sending command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:46] - ERROR: Error getting interlock status: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+[16:17:46] - ERROR: G9 communication error: Failed to send command: WriteFile failed (PermissionError(13, 'Access is denied.', None, 5))
+
diff --git a/com_ports.json b/com_ports.json
new file mode 100644
index 00000000..000c5fff
--- /dev/null
+++ b/com_ports.json
@@ -0,0 +1,25 @@
+{
+    "VTRXSubsystem": {
+        "com_port": "DUMMY_COM1"
+    },
+    "CathodeA PS": {
+        "com_port": "DUMMY_COM2"
+    },
+    "CathodeB PS": {
+        "com_port": "DUMMY_COM3"
+    },
+    "CathodeC PS": {
+        "com_port": "DUMMY_COM4"
+    },
+    "TempControllers": {
+        "com_port": "DUMMY_COM5"
+    },
+    "Interlocks": {
+        "com_port": "COM11",
+        "vid": 1027,
+        "pid": 24577,
+        "serial_number": "AD0K0ZIEA",
+        "manufacturer": "FTDI",
+        "description": "USB Serial Port (COM11)"
+    }
+}
\ No newline at end of file
diff --git a/dashboard.py b/dashboard.py
index d2156fba..c11999ef 100644
--- a/dashboard.py
+++ b/dashboard.py
@@ -9,7 +9,7 @@
 from usr.panel_config import save_pane_states, load_pane_states, saveFileExists
 import serial.tools.list_ports
 
-
+# title, row, width, height
 frames_config = [
     ("Interlocks", 0, None, 2),  # Moved to the top row
     ("Oil System", 1, 50, 150),
@@ -27,15 +27,17 @@
 ]
 
 class EBEAMSystemDashboard:
+    PORT_INFO = {
+        "AD0K0ZIEA" : "Interlocks"
+    }
     def __init__(self, root, com_ports):
         self.root = root
         self.com_ports = com_ports
-        self.root.title("EBEAM Control System Dashboard")
-
+        self.set_com_ports = set(serial.tools.list_ports.comports())
 
-        # if save file exists call it and open it
-        if saveFileExists():
-             self.load_saved_pane_state()
+        self.set_com_ports = set(serial.tools.list_ports.comports())
+        
+        self.root.title("EBEAM Control System Dashboard")
 
         # if save file exists call it and open it
         if saveFileExists():
@@ -56,6 +58,10 @@ def __init__(self, root, com_ports):
         # Set up different subsystems within their respective frames
         self.create_subsystems()
 
+        # starts the constant check for the avavilbe com ports
+        self._check_for_port_changes()
+
+
     def setup_main_pane(self):
         """Initialize the main layout pane and its rows."""
         self.main_pane = tk.PanedWindow(self.root, orient='vertical', sashrelief=tk.RAISED)
@@ -69,7 +75,6 @@ def setup_main_pane(self):
     def create_frames(self):
         """Create frames for different systems and controls within the dashboard."""
         global frames_config
-        global frames_config
 
         for title, row, width, height in frames_config:
             if width and height and title:
@@ -78,6 +83,8 @@ def create_frames(self):
             else:
                 frame = tk.Frame(borderwidth=1, relief="solid")
             self.rows[row].add(frame, stretch='always')
+            if title != "Interlocks":
+                self.add_title(frame, title)
             if title != "Interlocks":
                 self.add_title(frame, title)
             self.frames[title] = frame
@@ -151,13 +158,10 @@ def add_title(self, frame, title):
         label = tk.Label(frame, text=title, font=("Helvetica", 10, "bold"))
         label.pack(pady=0, fill=tk.X)
 
-    # saves data to file when button is pressed
     # saves data to file when button is pressed
     def save_current_pane_state(self):
         save_pane_states(frames_config, self.frames, self.main_pane)
-        save_pane_states(frames_config, self.frames, self.main_pane)
 
-    # gets data in save config file (as dict) and updates the global var of frames_config
     # gets data in save config file (as dict) and updates the global var of frames_config
     def load_saved_pane_state(self):
         savedData = load_pane_states()
@@ -167,6 +171,11 @@ def load_saved_pane_state(self):
                 frames_config[i] = (frames_config[i][0], frames_config[i][1], savedData[frames_config[i][0]][0],savedData[frames_config[i][0]][1])
         savedData = load_pane_states()
 
+        for i in range(len(frames_config)):
+            if frames_config[i][0] in savedData:
+                frames_config[i] = (frames_config[i][0], frames_config[i][1], savedData[frames_config[i][0]][0],savedData[frames_config[i][0]][1])
+        savedData = load_pane_states()
+
         for i in range(len(frames_config)):
             if frames_config[i][0] in savedData:
                 frames_config[i] = (frames_config[i][0], frames_config[i][1], savedData[frames_config[i][0]][0],savedData[frames_config[i][0]][1])
@@ -225,15 +234,14 @@ def create_messages_frame(self):
         """Create a frame for displaying messages and errors."""
         self.messages_frame = MessagesFrame(self.rows[4])
         self.rows[4].add(self.messages_frame.frame, stretch='always')
+        self.messages_frame = MessagesFrame(self.rows[4])
+        self.rows[4].add(self.messages_frame.frame, stretch='always')
         self.logger = self.messages_frame.logger
 
     def create_com_port_frame(self, parent_frame):
         self.com_port_frame = ttk.Frame(parent_frame)
         self.com_port_frame.pack(side=tk.TOP, fill=tk.X, padx=5, pady=5)
 
-        self.com_port_button = ttk.Button(self.com_port_frame, text="Configure COM Ports", command=self.toggle_com_port_menu)
-        self.com_port_button.pack(side=tk.TOP, anchor='w')
-
         self.com_port_menu = ttk.Frame(self.com_port_frame)
         self.com_port_menu.pack(side=tk.TOP, fill=tk.X, expand=True)
         self.com_port_menu.pack_forget()  # Initially hidden
@@ -251,44 +259,61 @@ def create_com_port_frame(self, parent_frame):
             dropdown.pack(side=tk.RIGHT)
             self.port_dropdowns[subsystem] = dropdown
 
-        ttk.Button(self.com_port_menu, text="Apply", command=self.apply_com_port_changes).pack(pady=5)
-
-    def toggle_com_port_menu(self):
-        if self.com_port_menu.winfo_viewable():
-            self.com_port_menu.pack_forget()
-            self.com_port_button.config(text="Configure COM Ports")
-        else:
-            self.update_available_ports() 
-            self.com_port_menu.pack(after=self.com_port_button, fill=tk.X, expand=True)
-            self.com_port_button.config(text="Hide COM Port Configuration")
-
-    def update_available_ports(self):
-        available_ports = [port.device for port in serial.tools.list_ports.comports()]
-        for dropdown in self.port_dropdowns.values():
-            current_value = dropdown.get()
-            dropdown['values'] = available_ports
-            if current_value in available_ports:
-                dropdown.set(current_value)
-            elif available_ports:
-                dropdown.set(available_ports[0])
-            else:
-                dropdown.set('')
-
-    def apply_com_port_changes(self):
-        new_com_ports = {subsystem: var.get() for subsystem, var in self.port_selections.items()}
-        self.update_com_ports(new_com_ports)
-        self.toggle_com_port_menu()
-
-    def update_com_ports(self, new_com_ports):
-        self.com_ports = new_com_ports
-        # TODO: update the COM ports for each subsystem
-
-        for subsystem_name, subsystem in self.subsystems.items():
-            if hasattr(subsystem, 'update_com_port'):
-                if subsystem_name == 'Vacuum System':
-                    subsystem.update_com_port(new_com_ports.get('VTRXSubsystem'))
-                elif subsystem_name == 'Cathode Heating':
-                    subsystem.update_com_ports(new_com_ports)
-            else:
-                self.logger.warning(f"Subsystem {subsystem_name} does not have an update_com_port method")
+
+    def _check_for_port_changes(self):
+        """
+        Compares the current available comports to the last set
+
+        Finally:
+            Calls itself to be cheack again
+        """
+        nowPorts = set(serial.tools.list_ports.comports())
+        
+        dif = self.set_com_ports - nowPorts
+        added_ports = nowPorts - self.set_com_ports
+
+        try:
+            # Process removed ports
+            for port in dif:
+                if port.serial_number in self.PORT_INFO:
+                    self.logger.warning(f"Lost connection to {self.PORT_INFO[port.serial_number]} on {port}")
+                    self._update_com_ports(self.PORT_INFO[port.serial_number], None)
+                    
+            # Process added ports
+            for port in added_ports:
+                if port.serial_number in self.PORT_INFO:
+                    self.logger.info(f"Attempting to connect {self.PORT_INFO[port.serial_number]} to {port}")
+                    self._update_com_ports(self.PORT_INFO[port.serial_number], port)
+        except Exception as e:
+            self.logger.warning(f"Error was thrown when either removing or adding a comport: {e}")
+
+        finally:
+            self.set_com_ports = nowPorts
+            self.root.after(500, self._check_for_port_changes)
+
+    def _update_com_ports(self, subsystem, port):
+        """
+        Calls to update subsystems with change in comport
+        """
+        if subsystem == None:
+            raise ValueError("_update_com_ports was called with invalid args")
+        strPort = port.device if port != None else None
+        if subsystem in self.subsystems.keys():
+            if subsystem == "Interlocks" or subsystem == "Vacuum System":
+                self.subsystems[subsystem].update_com_port(strPort)
+            #TODO: Need to add Vacuum system and Cathode Heating
+            
+    def _update_com_ports(self, subsystem, port):
+        """
+        Calls to update subsystems with change in comport
+        """
+        if subsystem == None:
+            raise ValueError("_update_com_ports was called with invalid args")
+        strPort = port.device if port != None else None
+        if subsystem in self.subsystems.keys():
+            if subsystem == "Interlocks":
+                self.subsystems[subsystem].update_com_port(strPort)
+            #TODO: Need to add Vacuum system and Cathode Heating
+            
         self.logger.info(f"COM ports updated: {self.com_ports}")
+
diff --git a/instrumentctl/g9_driver.py b/instrumentctl/g9_driver.py
index bad07db0..29dacebf 100644
--- a/instrumentctl/g9_driver.py
+++ b/instrumentctl/g9_driver.py
@@ -60,16 +60,16 @@ class G9Driver:
     def __init__(self, port=None, baudrate=9600, timeout=0.5, logger=None, debug_mode=False):
         self.logger = logger
         self.debug_mode = debug_mode
-        self._setup_serial(port, baudrate, timeout)
         self.last_data = None
         self.input_flags = []
         self._lock = threading.Lock()
-        self._response_queue = queue.Queue(maxsize=1)
-        self._running = True
-        self._thread = threading.Thread(target=self._communication_thread, daemon=True)
-        self._thread.start()
+        self._response_queue = queue.Queue(maxsize=1)  # Initialize queue here
+        self._thread = None
+        self._running = False
+        self.setup_serial(port, baudrate, timeout)
 
-    def _setup_serial(self, port, baudrate, timeout):
+
+    def setup_serial(self, port, baudrate, timeout):
         """
         Attempts to make a serial connection
 
@@ -86,13 +86,21 @@ def _setup_serial(self, port, baudrate, timeout):
                     bytesize=serial.EIGHTBITS,  
                     timeout=timeout  
                     ) 
+                
+                self._running = True
+                self._thread = threading.Thread(target=self._communication_thread, daemon=True)
+                self._thread.start()
                 self.log(f"Serial connection established on {port}", LogLevel.INFO)
             except serial.SerialException as e:
                 self.ser = None
                 self.log(f"Failed to open serial port {port}: {str(e)}", LogLevel.ERROR)
-        else:  
+        else:
             self.ser = None
-            self.log("No port specified", LogLevel.WARNING)
+            if self._running:
+                self._running = False
+                self.log("Disconnected", LogLevel.WARNING)
+            else:
+                self.log("No port specified", LogLevel.WARNING)
 
     def _communication_thread(self):
         """Background thread for handling serial communication"""
@@ -119,8 +127,6 @@ def _communication_thread(self):
 
             except Exception as e:
                 self.log(f"Communication thread error: {str(e)}", LogLevel.ERROR)
-                #TODO: this might be solved with the comport detection, but if not might what to define this somewhere else
-                self._response_queue.queue[0] = ([0] * 13, [0] * 13, 0)
                 time.sleep(0.5) # back off on errors
                 
             time.sleep(0.1)  # minimum sleep between successful reads
diff --git a/main.py b/main.py
index 927762f1..21edfc4d 100644
--- a/main.py
+++ b/main.py
@@ -6,7 +6,7 @@
 from usr.com_port_config import save_com_ports, load_com_ports
 
 def create_dummy_ports(subsystems): # For development purpose only
-    return {subsystem: f'DUMMY_COM{i+1}' for i, subsystem in enumerate(subsystems)}
+    return {subsystem: None for i, subsystem in enumerate(subsystems)}
 
 def start_main_app(com_ports):
     root = tk.Tk()
@@ -17,7 +17,7 @@ def start_main_app(com_ports):
 def config_com_ports(saved_com_ports):
     if getattr(sys, 'frozen', False) and hasattr(sys, '_MEIPASS'):
         try:
-            import pyi_splash
+            import pyi_splash # type: ignore
             pyi_splash.close()
         except ImportError:
             pass
@@ -52,8 +52,9 @@ def config_com_ports(saved_com_ports):
         frame.pack(pady=5, anchor='center')
         label = tk.Label(frame, text=f"{subsystem} COM Port:", width=25, anchor='e')
         label.pack(side=tk.LEFT, padx=(0, 10))
-
-        selected_port = tk.StringVar(value=saved_com_ports.get(subsystem, ''))
+        selected_port = tk.StringVar(value=None)
+        if subsystem in saved_com_ports:
+            selected_port = tk.StringVar(value=saved_com_ports[subsystem]['com_port'])
         combobox = ttk.Combobox(frame, values=available_ports, textvariable=selected_port, state='readonly', width=15)
         combobox.pack(side=tk.LEFT)
         selections[subsystem] = selected_port
@@ -68,11 +69,34 @@ def on_submit():
                 icon='warning')
             
             if response == 'yes':
-                selected_ports = create_dummy_ports(subsystems)
+                unselected_subsystems = [subsystem for subsystem, port in selected_ports.items() if not port]
+                dummy_ports = create_dummy_ports(unselected_subsystems)
+                
+                # Update only unselected ports with dummy values
+                for subsystem in unselected_subsystems:
+                    selected_ports[subsystem] = dummy_ports[subsystem]
             else:
                 return  # Stay on the configuration window
+            
+        port_details = {}
+        for subsystem, port in selected_ports.items():
+            for com_port in serial.tools.list_ports.comports():
+                if com_port.device == port:
+                    port_details[subsystem] = {
+                        'com_port': port,
+                        'vid': com_port.vid,
+                        'pid': com_port.pid,
+                        'serial_number': com_port.serial_number,
+                        'manufacturer': com_port.manufacturer,
+                        'description': com_port.description
+                    }
+                    break
+            else:
+                port_details[subsystem] = {
+                    'com_port': port,
+                }
         
-        save_com_ports(selected_ports)
+        save_com_ports(port_details)
         config_root.destroy()
         
         # Start the main application
diff --git a/scripts/ProcessMonitor/PMON digital meter RS-485 communication manual (1).pdf b/scripts/ProcessMonitor/PMON digital meter RS-485 communication manual (1).pdf
new file mode 100644
index 00000000..9ba530de
Binary files /dev/null and b/scripts/ProcessMonitor/PMON digital meter RS-485 communication manual (1).pdf differ
diff --git a/subsystem/interlocks.py b/subsystem/interlocks.py
index 6c9171df..2de09467 100644
--- a/subsystem/interlocks.py
+++ b/subsystem/interlocks.py
@@ -4,6 +4,9 @@
 import instrumentctl.g9_driver as g9_driv
 from utils import LogLevel
 import time
+import instrumentctl.g9_driver as g9_driv
+from utils import LogLevel
+import time
 
 class InterlocksSubsystem:
     # the bit poistion for each interlock
@@ -37,6 +40,7 @@ class InterlocksSubsystem:
         'HVolt ON': None
     }
 
+
     def __init__(self, parent, com_ports, logger=None, frames=None):
         self.parent = parent
         self.logger = logger
@@ -57,11 +61,10 @@ def __init__(self, parent, com_ports, logger=None, frames=None):
                     self.log(f"Failed to connect: {e}", LogLevel.ERROR)
                     self._set_all_indicators('red')
             else:
-                self.driver = None
+                self.driver._running = False
                 self.log("No COM port provided for G9 driver", LogLevel.WARNING)
                 self._set_all_indicators('red')
         except Exception as e:
-            self.driver = None
             self.log(f"Failed to initialize G9 driver: {str(e)}", LogLevel.WARNING)
             self._set_all_indicators('red')
         
@@ -74,18 +77,23 @@ def update_com_port(self, com_port):
         Catch:
             Expection: If inilizition throws an error
         """
+
         if com_port:
             try:
-                new_driver = g9_driv.G9Driver(com_port, logger=self.logger)
+                if self.driver:
+                    self.driver.setup_serial(com_port, 9600, 0.5)
+                else:
+                    self.driver = g9_driv.G9Driver(com_port, logger=self.logger)
                 # Test connection by getting status
-                new_driver.get_interlock_status()
-                self.driver = new_driver
+                self.driver.get_interlock_status()
+                self.parent.after(self.update_interval, self.update_data)
                 self.log(f"G9 driver updated to port {com_port}", LogLevel.INFO)
             except Exception as e:
-                self.log(f"Failed to update G9 driver: {str(e)}", LogLevel.ERROR)
                 self._set_all_indicators('red')
+                self.log(f"Failed to update G9 driver: {str(e)}", LogLevel.ERROR)
         else:
             self._set_all_indicators('red')
+            self.driver.setup_serial(None, 9600, 0.5)
             self.log("update_com_port is being called without a com port", LogLevel.ERROR)
 
     def _adjust_update_interval(self, success=True):
@@ -213,7 +221,7 @@ def update_data(self):
                         return
                     
                 sitsf_bits, sitdf_bits, g9_active = status
-
+                
                 # Process dual-input interlocks (first 3 pairs)
                 for i in range(3):
                     safety = (sitsf_bits[i*2] & 
@@ -224,7 +232,7 @@ def update_data(self):
                     self.update_interlock(self.INPUTS[i*2], safety, data)
                 
                 # Process single-input interlocks
-                for i in range(6, 13):
+                for i in range(6, 12):
                     safety = sitsf_bits[i]
                     data = sitdf_bits[i]
                     self.update_interlock(self.INPUTS[i], safety, data)
@@ -234,8 +242,10 @@ def update_data(self):
                 self.update_interlock("All Interlocks", True, all_good)
 
                 # make sure that the data output indicates button and been pressed and the input is not off/error
-                if g9_active == sitsf_bits[12]:
+                if g9_active == sitsf_bits[12] == 1:
                     self.update_interlock("G9SP Active", True, all_good)
+                else:
+                    self.update_interlock("G9SP Active", False, all_good)
 
                 self._adjust_update_interval(success=True)